Avoid using suspend_freq to set the Fmax for the device, since it will
re-enable the actmon watermark interrupts again if the suspend_freq is
not zero in the devfreq_suspend_device call.
Since we want to make sure device is running at Fmax but avoid using
suspend_freq, we can forcelly override the resume_freq with the
scaling_max_freq to reach the same effect.
Bug 4271562
Signed-off-by: Johnny Liu <johnliu@nvidia.com>
Change-Id: Ia19a7ef9de14643abf1b174b6180e40a847de132
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2974074
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
The suspend_freq is a fixed value for devfreq core, while the
resume_freq will be changed dynamically based on the last previous
updated frequency value of the device.
When device is put into suspend mode, devfreq core will update the
resume frequency with the suspend frequency. Therefore, when the device
is resumed back again, it will run at suspend_freq.
Forcelly set the suspend_freq as Fmax so that device will run at Fmax
when it is resumed back.
Bug 4269900
Signed-off-by: Johnny Liu <johnliu@nvidia.com>
Change-Id: Ic6511613ae5d02831a66dd1c2a93f21c142bf3a7
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2973229
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
The original resume_freq will be overridden when the device is put
into suspend mode. Therefore, the resume cycle won't always use the
max frequency of the device to set the actmon count weight.
Change the implementation to use scaling_max_freq to always use the
max frequency of the device to set the actmon count weight.
Bug 4252125
Signed-off-by: Johnny Liu <johnliu@nvidia.com>
Change-Id: Iaaae8ada989cd1ed7dd728fb526ad4391a2f192c
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2967098
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Interconnect support for multimedia engines is disable for Linux v6.2
kernels. Rather than always disabling interconnect support for these
kernels, we just need to ensure the necessary upstream kernel patches
are in place for Linux v6.2 kernels. Therefore, enable interconnect
support for all kernels.
Bug 4097374
Change-Id: Ibceb866ba239454a131543cdff90e68007b28942
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2937758
Reviewed-by: Johnny Liu <johnliu@nvidia.com>
Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
When the device is in suspend mode, There is no point to update
actmon count weight and send ICC request for the device.
If ICC request is sent for the device in suspend mode, in osidle state,
the default EMC frequency will be affected due to the accumulated ICC
bandwidth QoS constraint, and affect the overall osidle power.
Bug 4168788
Signed-off-by: Johnny Liu <johnliu@nvidia.com>
Change-Id: I8700b131b5f914d93feed9f8a9d792c2fdaa9b53
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2931905
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, engine drivers only enable runtime PM during the host1x
init callback. This can happen slightly later than the probe, which
can cause the power domain to intermittently not be turned off after
probe.
My hypothesis is that there is a race condition between the post-probe
power domain poweroff that is done from a queued work, and the
pm_runtime_enable call happening in the host1x init callback.
If the pm_runtime_enable call happens first, everything is OK and
the power off work can disable the power domain as PM runtime is
enabled and the device is runtime suspended. If power off work runs
first, PM runtime is still disabled for the device and the domain
must be kept powered.
Resolve the issue by moving the runtime PM enablement to the
probe function.
Bug 3982357
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Change-Id: I3e028bc03c8ff05d18e63039ac9e590c4557e268
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2859475
Reviewed-by: Santosh BS <santoshb@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Implement the get_streamid_offset and can_use_memory_ctx callbacks
required for supporting context isolation. Since old firmware on VIC
cannot support context isolation without hacks that we don't want to
implement, check the firmware binary to see if context isolation
should be enabled.
Bug 3724727
Change-Id: Ie4c952987f2a5ae660257194b43c18829ac707c4
Support newer VIC firmware by accepting the new magic number 0x10fe,
loading the full code segment instead of just the first page at boot
time, and skipping FCE setup if the firmware header indicates that
FCE is handled internally by the firmware.
JIRA LS-34
Change-Id: I97c394ace6557a589901b2c4b2ad1b72619cbf66
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2498819
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add the upstream tegra-drm driver with the 'Host1x/Tegra UAPI' series
[0] applied. This driver will be built as an external module for testing
and development with upstream Linux kernels.
The following modifications have been made to the series posted upstream
1. Update the Makefile to always build the driver as a module
2. Always enable the tegra_drm_ioctl_xxx in the tegra_drm_ioctls and
remove the dependency on CONFIG_DRM_TEGRA_STAGING.
3. Rename the include/uapi/drm/tegra_drm.h to
include/uapi/drm/tegra_drm_next.h to avoid conflicts with upstream
headers when building as an external module.
5. Rename the module that is built to be tegra-drm-next.ko instead of
tegra-drm.ko to avoid any depmod conflicts with the upstream driver.
[0] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=215770
Bug 3156385
Change-Id: I19206f989325c9c6ff3c2b9301d964140d52234f
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2435802
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
