In Linux v6.9 the data argument of the function pointer passed to
gpio_device_find() was updated to be a const type. This breaks building
the CDI and ISC drivers for Linux v6.9. Update the test in conftest that
detects the presence of the gpio_device_find() function to perform a
second test to see if the argument for the function pointer is a const
type. Update the drivers that use the gpio_device_find() function
accordingly to fix the build.
Bug 4471899
Change-Id: I562451a401bcaebcf0acf9a7d563cb0ea1d87807
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3104559
(cherry picked from commit 037fa78728)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3104651
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
When adding conftest tests for detecting if specific functions are
present, it is always better to check if the newly added function is
present versus the function that has been removed. The reason being that
is the newly added function is modified in the future then the conftest
tests can be extended to check for updates to the function.
Therefore, instead of checking if the function gpiochip_find() is
present, which was removed in Linux v6.7, check if the function
gpio_device_find() is present, which replaced gpiochip_find in Linux
v6.7.
Bug 4346767
Bug 4471899
Change-Id: I32bf1c3da32abbf3c8d3ef9ea350decf1564e0bc
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
(cherry picked from commit 68e7840dd8)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3111544
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Issue: Observing the EAPOL packet after a second in 1/10 roams
Observing TLP Malform packets on SC7
Observing TXFIFO error when connected to serving AP
Compilation errors for K6.x
Fix: Add exact base driver released by realtek with EAPOL/TLP/TXFIFO
fixes and also resolve some compilation errors.
DRIVERVERSION v5.14.0.4-217-g7a0377e61.20240410_COEX20240327-2727_beta
BTCOEXVERSION COEX20240327-2727
Bug 4320751
Bug 4556940
Bug 4568390
Change-Id: Ib02056ea388300dab2364b2bd6ceaf0a2096d3f4
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3115032
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Reviewed-by: Shobek Attupurath <sattupurath@nvidia.com>
Tested-by: Revanth Kumar Uppala <ruppala@nvidia.com>
Reviewed-by: Revanth Kumar Uppala <ruppala@nvidia.com>
When booting kernels that have both the upstream and out-of-tree audio
drivers for Tegra present the following errors are observed ...
Error: Driver 'tegra210-ahub' is already registered, aborting...
Error: Driver 'tegra210-amx' is already registered, aborting...
Error: Driver 'tegra186-dspk' is already registered, aborting...
Error: Driver 'tegra210-mvc' is already registered, aborting...
Error: Driver 'tegra210-adx' is already registered, aborting...
Error: Driver 'tegra210-ahub' is already registered, aborting...
Error: Driver 'tegra210_mixer' is already registered, aborting...
Error: Driver 'tegra186-asrc' is already registered, aborting...
Error: Driver 'tegra210-dmic' is already registered, aborting...
Error: Driver 'tegra210-i2s' is already registered, aborting...
Error: Driver 'tegra210-admaif' is already registered, aborting...
The problem is that the upstream Tegra audio drivers are loaded first
and then the kernel attempts to load the out-of-tree variants because
they have a different name. The out-of-tree are installed under the
'updates' directory in the file-system and by dropping the 'oot' suffix
from the driver name, then depmod will not attempt to load both variants
of the audio drivers and prioritise loading the drivers in the 'updates'
directory.
Bug 4590647
Change-Id: I6c6fe1eb84bc9fdfa4a8f4abf1ce3a75f3bfba8a
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3110266
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Building the NVPPS driver with Linux v6.9-rc1 is failing with the
following error ...
drivers/nvpps/ptp-notifier.c:125:69:
error: invalid use of undefined type 'const struct device_node'
Add the header file of.h to fix this build issue.
Bug 3826818
Bug 4471899
Change-Id: I0eb23e3556ec280447e3d2c499afc11daad601a0
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3104379
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Reviewed-by: Paritosh Dixit <paritoshd@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
- Add details of register mapping. If we do not pass these details in
devicetree then it is giving error "TSC memory resource not defined"
and not able to probe the driver. It is mandatory field for Tegra234.
- Remove hardcoding of ethernet interface name.
- Add to pass DT node for primary and secondary emac node instead of
interface name.
- Update GPIO details as per refactoring of HTE driver.
- Update example as per update driver and DT node.
Bug 4489344
Bug 3826818
Change-Id: I5edbbe762543289cc2a6225111c5e6250bbabb99
Signed-off-by: Hiteshkumar Patel <hiteshkumarg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3076493
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Add compile time tests to the conftest.sh script
to determine netif_napi interface check at compile
time for the kernel being used. This is beneficial
for working with 3rd party Linux kernels that may
have back-ported upstream changes into the kernel
and so the kernel version checks do not work.
Bug 4456727
Bug 4451567
Change-Id: I7b00c3b491d778a9bf2f0d1069a5e4546b722e2a
Signed-off-by: Jason Mei <jianjunm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3096002
Reviewed-by: svcacv <svcacv@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Reviewed-by: Bibek Basu <bbasu@nvidia.com>
Existing implementation uses a single page_pool
for all Rx DMA channels. As by default all irqs
are on CPU 0, this does not cause any issue.
Routing an irq to some other CPU causes race
conditon for page allocation from page_pool which
leads to random memory corruption.
[ 158.416637] Call trace:
[ 158.416644] arm_lpae_map_pages+0xb4/0x1e0
[ 158.416649] arm_smmu_map_pages+0x8c/0x160
[ 158.416661] __iommu_map+0xf8/0x2b0
[ 158.416677] iommu_map_atomic+0x58/0xb0
[ 158.416683] __iommu_dma_map+0xac/0x150
[ 158.416687] iommu_dma_map_page+0xf4/0x220
[ 158.416690] dma_map_page_attrs+0x1e8/0x260
[ 158.416727] page_pool_dma_map+0x48/0xd0
[ 158.416750] __page_pool_alloc_pages_slow+0xc4/0x390
[ 158.416757] page_pool_alloc_pages+0x64/0x90
[ 158.416762] ether_padctrl_mii_rx_pins+0x164/0x9d0 [nvethernet]
[ 158.416807] ether_padctrl_mii_rx_pins+0x478/0x9d0 [nvethernet]
[ 158.416822] osi_process_rx_completions+0x284/0x4d0 [nvethernet]
[ 158.416832] 0xffffa26218b8f71c
[ 158.416855] __napi_poll+0x48/0x230
[ 158.416871] net_rx_action+0xf4/0x290
[ 158.416875] __do_softirq+0x130/0x3e8
[ 158.416889] __irq_exit_rcu+0xe8/0x110
This change creates a page_pool per Rx DMA channel.
This ensures there is no race conditon for page
alloc/dealloc from each DMA napi context.
Bug 4541158
Change-Id: I12668ee7d824fd30d54a874bbbdf190d02943478
Signed-off-by: Aniruddha Paul <anpaul@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3093534
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Issue: RTL8822CE driver doesn't have active roaming
support and has issues with current roaming
algorithm
Fix: Add driver with active roaming enabled and fixes
issue with 5GHz and BT coex
DRIVERVERSION -
"v5.14.0.4-203-g4a9c85a0f.20240219_COEX20240125-2727_beta"
BTCOEXVERSION -
"COEX20240125-2727"
Bug 4213654
Change-Id: Icff3ece063518575fbcca3d8ea5be0b6314a567f
Signed-off-by: Shobek Attupurath <sattupurath@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3079863
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Reviewed-by: Revanth Kumar Uppala <ruppala@nvidia.com>
Reviewed-by: Ashutosh Jha <ajha@nvidia.com>
V4l2 ctrl values are 0 during init time s_ctrl call
from v4l2. Since framerate val parameter is 0, when
set_framerate_ex is called from set_ctrl_ex during
initialization for probing of imx318 sensor, this
results in invalid error and probe failure for imx318.
Assign framerate 'val' to a value from imx318 sensor
device-tree properties within the given range to avoid
probe failure due to this.
Bug 3692128
Change-Id: Ib5f50e64f99c8443bf604066eda315dc96fbde03
Signed-off-by: Shubham Chandra <shubhamc@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3089350
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Praveen AC <pac@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
If the userspace service 'irqbalance' is installed then the nvethernet
driver crashes when there is network activity. To avoid this crash set
the IRQF_NOBALANCING flash for the VM interrupts. No performance
degradation is observed when running iperf3 with a 1Gbps link.
Long-term the nvethernet driver still needs to be fixed to allow IRQ
balancing.
Bug 4293378
Bug 4541158
Change-Id: I0aa4ee28e36c7d273f14ff043544e72d3e988bd3
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3087525
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Reviewed-by: Revanth Kumar Uppala <ruppala@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Fix imx477 partial frame issue and wrong frame-length
/exposure time calculations.
Uses hardcoded sensor internal clock frequency
instead of clock values from sensor device tree.
Adding clock frequency to device tree also require
deskew_initial_enable = "true". Setting deskew in
device tree is causing kernel panic in function
nvcsi_deskew_setup(). For unblocking the IMX477
use case, set hardcoded clock in driver for now.
Bug 4384649
Change-Id: Iedb02673c6f4da140aee22adc991805b6aa1eb7e
Signed-off-by: Ankur Pawar <ankurp@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3086503
Reviewed-by: Praveen AC <pac@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
When ar1335_common.c was ported to K5.15 it was refactored
based on the review comments. During that process index
in mcu_send_ctrl_cmd() was set to 0xFFFF which was causing
issue in setting sensor format. Pass the index from the
caller of mcu_send_ctrl_cmd().
Bug 4389285
Change-Id: Ic84a8de58051fe947f0f4d6597d1a55bc29ef9e6
Signed-off-by: Ankur Pawar <ankurp@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3024535
Reviewed-by: Praveen AC <pac@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Build the Tegra PCI vnet driver fails with Linux v5.14 because the
lpci_epc_map_addr() have the incorrect number of arguments.
The arguments to the lpci_epc_map_addr() functions were updated
in Linux v5.12 but the current Tegra PCI EPF driver assumes that they
were updating after Linux v5.14. Update the Tegra PCI EPF driver to
use the correct arguments for v5.12 onwards.
Bug 4456727
Bug 4451567
Change-Id: Ie4ef36854d380e0a896a0f256d846ab8b89ca447
Signed-off-by: Jason Mei <jianjunm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3070170
Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Reviewed-by: Bibek Basu <bbasu@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Kernel freeze is occurring due to incorrect cleanup
in vi5.c.
Fix for kernel freeze:
1 Don't call vi_channel_drv_unregister() and
tegra_vi_media_controller_cleanup() in vi5_remove.
2 capture_vi_probe() is calling vi_channel_drv_register() and
tegra_capture_vi_media_controller_init(), so capture_vi_remove()
should call vi_channel_drv_unregister() and
tegra_vi_media_controller_cleanup()
3 Use correct dev pointer in vi_channel_drv_unregister().
Code cleanup:
1 Remove use_legacy_path variable that was used for T186.
2 Removed unused t194_vi5_file_private struct.
Bug 4415340
Change-Id: I6153f65d62a9f7f4fc5d04c2ace948a29396e404
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3077660
Reviewed-by: Shubham Chandra <shubhamc@nvidia.com>
Reviewed-by: Ankur Pawar <ankurp@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Tested-by: Ankur Pawar <ankurp@nvidia.com>
The following error messages are sometimes observed on boot ...
tegra-nvjpg 15380000.nvjpg: failed to get icc write handle
tegra-nvdec 15480000.nvdec: failed to get icc write handle
tegra-nvjpg 15540000.nvjpg: failed to get icc write handle
tegra-nvenc 154c0000.nvenc: failed to get icc write handle
tegra-vic 15340000.vic: failed to get icc write handle
tegra-nvjpg 15380000.nvjpg: failed to get icc write handle
The above messages are harmless because the ICC core is returning
-EPROBE_DEFER to indicate that the ICC provider is not available. When
-EPROBE_DEFER is returned the kernel will attempt to probe the device
again and so print an error on -EPROBE_DEFER can be misleading. Fix the
above by using the function dev_err_probe() to print error messages
because this function will only print an error message if the error code
is not -EPROBE_DEFER.
Bug 3436156
Bug 4496044
Change-Id: I47b77e5a0f2bdb817a832daa305246c8803f456b
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3075237
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
- Integrate calibration data structure from
Leopard Imaging hawk driver into NVIDIA
hawk driver
- Rearrange EEPROM calibration data structure to
maintain backward compatibility with HAWK, OWL
modules with EEPROMs programmed using earlier
calibration data structure
- Use separate structures for tracking imu noise
parameters and place it after the module
serial number.
- Change module serial number length used for
reading the serial number from EEPROM data
L4T-4649
Change-Id: I17613905e63fef3fc690dca42a0a10bd1f4fc24d
Signed-off-by: Praveen AC <pac@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3072846
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following changes are done to reduce 400ms to 200ms:
1> I2c address trans during every power_on is moved to probe time.
Since with virtual-i2c mux IMUs are handled and hence we don't need to
do i2c address trans every time. So once during probe time is enough,
that reduces ~120ms.
2> Reduced sleeping time during start stream call to 20ms, Which reduced
~100ms.
Bug 4180672
Change-Id: I027148f64b892d95e5432394f90bf171156ef9c0
Signed-off-by: Praveen AC <pac@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3072821
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
Reviewed-by: Ankur Pawar <ankurp@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
- Fixes the frame corruption issue encountered
when simultaneously streaming from two
hawks via E3653 GMSL2 board
- Route each serializer output to a different
deserializer output CSI port instead of
routing video data from both serializers
to the same deserializer output port
- Route data through two virtual channels for
each of the two output ports instead of four
virtual channels all through a single output
port
- Fix serdes programming comments
Bug 4032165
Bug 3753423
JEC-286
Change-Id: I7b4e929e9f5330cc6eb0aa72646ce429a713df7a
Signed-off-by: Praveen AC <pac@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3072829
Reviewed-by: Ankur Pawar <ankurp@nvidia.com>
Reviewed-by: Anubhav Rai <arai@nvidia.com>
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
The function nvhost_get_private_data() is a wrapper around the Linux
platform_get_drvdata() function. To remove all the legacy nvhost code
that is no longer supported or needed, update the camera drivers to use
platform_get_drvdata() directly. Note that there are places in these
drivers that already use platform_get_drvdata() and so this change makes
these drivers more consistent.
Bug 4475969
Change-Id: Ie474c46c438f69c2141f41d0702bf57525597ab5
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3065974
(cherry picked from commit 73a4985dbd)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3066024
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
The 'of_pwm_n_cells' has been removed from the pwm_chip structure in the
latest linux-next development branch that will eventually become Linux
v6.9. This parameter was used in function 'of_pwm_xlate_with_flags'.
The camera CDI and ISC drivers don't use the kernel's
of_pwm_xlate_with_flags xlate function and instead implement their own
xlate function. Therefore, it is safe to simply drop the usage of the
'of_pwm_n_cells' parameter completely in these drivers.
Bug 4471899
Change-Id: Id4cf4b7ac182d0654080e536457bab1a7128ad1d
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3063806
(cherry picked from commit 072a881099)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3067933
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
