Set utmi_pll1 as parent for cpu_isc clocks
Bug 4782274
Change-Id: Iab71527dc6de3f46d4b7880c3dd00eadc130c5ba
Signed-off-by: Mallikarjun Kasoju <mkasoju@nvidia.com>
dev_err is used for information prints.
Changed them to dev_info and dev_dbg.
Bug 4736849
Signed-off-by: Mallikarjun Kasoju <mkasoju@nvidia.com>
Change-Id: I990edef75566ca718fab611b36385f6ec5f12c44
Read fuse to check if chip has RDL fix or not.
Return error for non-RDL chips.
Bug 4243018
Signed-off-by: Mallikarjun Kasoju <mkasoju@nvidia.com>
Change-Id: Ibe441ca136c18e03cebbc1cd5d0cc529d45005c6
UFS parent clock in T264 is pllrefufs_clkout624
and the rate is to 208 MHz.
Bug 4199271
Change-Id: I5b86e199f93fc1c81506cb29391b96efdc7de3a4
Signed-off-by: Mallikarjun Kasoju <mkasoju@nvidia.com>
Set HCLKDIV to 0xD0 as per IAS.
Bug 4199271
Change-Id: I4779c74c657d8723a27a167096dfac9d22128436
Signed-off-by: Mallikarjun Kasoju <mkasoju@nvidia.com>
Use conftest for finding whether APIs tegra264_io_pad_power_*
are available or not before using it.
Bug 4911768
Change-Id: Ic8df4a0109a270d5a486a67900ed7fe4c57b79be
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
- Rename the mixer controls to match with L4T mixer controls.
- As most of the controls are matching between t234 and t264,
the difference controls are added as part of component driver
probe.
- Comment ARAD and regdump controls as ARAD and regdump are
non-functional currently.
- Remove unused controls. MIXER, ASRC and AMX Enable controls are
not required to be set explicitly as AudioServer handles this.
Bug 4796520
Change-Id: Ia6fdd507819b1b354544b2b1217d9aa399e106b9
Signed-off-by: Sheetal <sheetal@nvidia.com>
The change to write the INTF_CRC_CFG register was inadvertently
left out. Correct this.
Bug 4809300
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Change-Id: I208da56d03e90e72ce26dffe7bef1cdeab95fab6
Update the misc register programming for T264
for slave.
Bug 4711327
Change-Id: Ia6409bbee66e9984f83ad792d67c730fa637f58d
Signed-off-by: Vishwaroop A <va@nvidia.com>
Add support to profile NvHost IPs on various chips
by HWPM module.
Bug 4170421
DOS-SHR-7966
Signed-off-by: vasukis <vasukis@nvidia.com>
Change-Id: I42ac3b5fa79d7b6f97e66098cb84277cda2aff4d
T264 has 1MHz clock for tach. Add support for this
clock.
Signed-off-by: Vishwaroop A <va@nvidia.com>
Change-Id: Ic2ecc5dd2494f3b55340f1b925ca616c4844ed6f
Tegra264 use a different base address than Tegra234.
Update the logic of parsing Base Timer and WDT index from iomem resource
beginning.
Bug 4729969
Change-Id: I68d4f03373d2d648c1cf3b82bf74972361693bb5
Signed-off-by: Kartik <kkartik@nvidia.com>
Add support for T264 which has four I2C/DP-AUX instances and four
separate registers to configure each of it. The four registers are
in consecutive addresses, but follow the same bitmap as T234.
T264 I2C <-> DPAUX map is as below:
I2C6 <-> DPAUX0
I2C10 <-> DPAUX1
I2C4 <-> DPAUX2
I2C8 <-> DPAUX3
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Change-Id: I0a38a9a96894fc2d9bb1c0647f4f9cf06e13aaf1
Adding support in existing mttcan driver to control T264 FSI
CAN controllers from CCPLEX whether FSI firmware is loaded on
system or not. FSI CAN clocks will be enabled by FSI crystal clock
upon boot. SW does not need to enable or control clocks. CCPLEX cannot
control FSI controller resets, reset can be handled during boot, thus
disabled clocks and reset for T264 SOC.
Bug 4317516
Change-Id: I8e6b20640c8763ebc0a9d9192e3212a49902f9b4
Signed-off-by: Shubhi Garg <shgarg@nvidia.com>
- Defined the 32 dai-links for T264.
- Add T264 soc_data to fetch the number of channels based on soc.
Jira TAS-2331
Change-Id: I75b331ef34b8015b30ec48c72e6adceded10924b
Signed-off-by: Sheetal <sheetal@nvidia.com>
Add I2S, AMX and ADX controls as chip specific data to fetch
controls based on Max number of channels supported by chip.
Jira TAS-2387
Change-Id: Ieac8f7d55581856a595ffff093fa9d1b8ef493f9
Signed-off-by: Sheetal <sheetal@nvidia.com>
- CIF register bitmask is updated in T264, it is mandatory
to update it for T264 audio usecases.
- With this change all T234 AHUB usecases can be verified.
TAS-2330
Change-Id: I9b64fcb5725bfd4dd01ef29466f7255bdfd6a53f
Signed-off-by: Sheetal <sheetal@nvidia.com>
For Tegra264, new PMC driver is introduced to support instance specific
driver data. As per the design, on Tegra264, if client drivers are using
below PMC exported APIs, they need to pass their struct device pointer
as an argument. Also it is expected that clients dt node should have
"nvidia,pmc" property populated with appropriate PMC instance phandle.
- *_io_pad_power_enable()
- *_io_pad_power_disable()
Bug 4470933
Change-Id: Idb41b95cd863f313496110a4e3c4b5ea61a1df8f
Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com>
- Add compatible and chip data for T264 ADSP[1:0] and AON
- Add T264 dev files to build makefile
DNS
Bug 3682950
Bug 4165898
Change-Id: Idbaef1950ff2f736c7844ee0525d55b596b11132
Signed-off-by: Viswanath L <viswanathl@nvidia.com>
Same compatible string can be shared between host1x_next and
host1x_fence kernel modules so that those two modules will get
automatically loaded.
Bug 4291144
Signed-off-by: Johnny Liu <johnliu@nvidia.com>
Change-Id: I9901f4e094d1d6484f6d6cec6b9890c9a51ad1f6
host1x-fence driver is updated to support t264.
Bug 4132685
Change-Id: I239d12864d6336cc6acca2265dbec3cd05ee629b
Signed-off-by: jianjunm <jianjunm@nvidia.com>
Added t264 specific pdata struct to
use r5_ctrl and pwr_status registers
values.
Jira CAMERASW-11038
Change-Id: I4ae6b3ffee48eff61a6b7a7309c251c38d68bf30
Signed-off-by: fraunak <fraunak@nvidia.com>
Adding a module that disables cg on t264 specifically. This is meant for
purely internal usage by the SSG and noise-characterization teams.
We are making use of some override signals that remain on a per-core
basis for this purpose.
Bug 4697511
Change-Id: I04093b97b10e1a87bfaa2615573b284a6f1ef4f3
Signed-off-by: Ishan Shah <ishah@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3237175
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
Tested-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: buildbot_gerritrpt <buildbot_gerritrpt@nvidia.com>
