The 'core_init_notifier' has been removed from the pci_epc_features
structure in Linux v6.10. Given that this is a static structure and it
is initialised as 'false', we don't need to explicitly initialise this
because it will always be initialised as 'false' by default for kernels
that support this.
Bug 4787193
Bug 4593750
Change-Id: Ic2abaa3d2ab1a5c766a805936fd8ab394214bf42
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3233999
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
When Root port applies secondary bus reset(SBR) or link disable, EP_RESET
interrupt is received at Endpoint. On EP_RESET poll for detect reset LTSSM
state which confirms that SBR reset released or link disable is cleared.
After polling perform Endpoint controller cold reset.
Due to HW bug 4777981, C2 x2/x1 LTSSM state doesn't move to detect reset
when SBR reset is released, instead it stays in hot reset state. In this
case perform Endpoint controller cold reset after poll timeout. PCIe link
still comes up in this case.
Bug 4777981
Bug 4785875
Change-Id: I89402aa7c963082510170b88a1f7a4ec481162be
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-t264/+/3197116
Reviewed-by: Nagarjuna Kristam <nkristam@nvidia.com>
GVS: buildbot_gerritrpt <buildbot_gerritrpt@nvidia.com>
Reviewed-by: Bibek Basu <bbasu@nvidia.com>
When PCIe link is disabled or secondary bus reset is done by RP,
EP LTSSM state goes to link disable or hot reset respectively.
Update the LTSSM state check accordingly to support link disable
and secondary bus reset.
XTL_EP_PRI_BAR_CONFIG and XTL_EP_PRI_RESIZE_BAR1 are part of
hot reset domain, when link is going through hot reset, these
registers are not accessible. So, remove these register programming
in tegra264_pcie_ep_clear_bar(). After hot reset these registers
come back with reset values.
Bug 4712053
Change-Id: Ieaf37ed9fed6722db8a16027947121b1cfd1ef4c
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-t264/+/3163927
Reviewed-by: Bibek Basu <bbasu@nvidia.com>
Reviewed-by: Nagarjuna Kristam <nkristam@nvidia.com>
GVS: buildbot_gerritrpt <buildbot_gerritrpt@nvidia.com>
The pci_epc_features structure was updated in Linux v6.9 to move various
fields under a new pci_epc_bar_desc structure. Use conftest to determine
if the new pci_epc_bar_desc structure is present.
Finally, add the endpoint alignment for the inbound ATU on Tegra264
which is 64kB.
Bug 4627271
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Change-Id: I074e19ca53cea0e13d9872b240a023dd83779ae7
Reviewed-on: https://git-master.nvidia.com/r/c/linux-t264/+/3129630
Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
