MODS tests use private IOCTL to configure MAC loopback mode.
Add a priv ioctl handler to support this in nvethernet driver.
nvethernet driver also has a sysfs knob to configure loopback.
Bug 2665785
Change-Id: I7f488fe81a0772a0881dbba48592bbcd11205dbf
Signed-off-by: Srinivas Ramachandran <srinivasra@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2166181
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Issue:
1) EQOS_UDP_FILTERING_CMD: SW check for VLAN Hash Filter hw feature
along with user input.
2) EQOS_UDP_FILTERING_CMD/EQOS_TCP_FILTERING_CMD: SW don't set IPFE bit
in MAC packet filter register.
Fix:
1) No need to check for VLAN hash filter hw feature as Hash
filtering is not supported in SW.
2) Call osi_config_l3_l4_filter_enable if MAC filter register already
not configured for L3/L4 filtering.
Bug 200512422
Change-Id: I2cba199f57b79b7357663d39c8e2281f4b49bda8
Signed-off-by: Rakesh Goyal <rgoyal@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2148361
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Updated IOCTL path to not get impacted with new API
change. OSI call should be done with correct parameters
1) dma_routing_enable
2) dma_chan and
3) addr_mask (for L2 filtering) to support new IOCTL
4) src_dest (for L2 filtering) to support new IOCTL
Included logic for User priority based RxQ selection. We can have DT
entry "nvidia,rx_queue_prio" to configure this setting
i.e. for valid following Queue mapping
Priorities 6,3 to Queue 3
Priorities 4,5 to Queue 2
Priority 0 to Queue 1 and
Priority 1 to Queue 0.
setting will be nvidia,rx-queue-prio = <0x2 0x1 0x30 0x48>;
If static channel selection, i.e. RXQtoDMA set with value 0x03020100,
Priorities 6,3 to Queue 3 to chan 3
Priorities 4,5 to Queue 2 to chan 2
Priority 0 to Queue 1 to chan 1 and
Priority 1 to Queue 0 to chan 0
else if DCS(dma channel selection) enabled
channel will be selected based on filter rules.
Included logic to take input from User On DCS enable or disable. User can
update dt entry "nvidia,dcs-enable", for dcs enable disable for all queue.
i.e nvidia,dcs-enable = <0x1> will enable DCS for all queue.
Bug 200525721
Change-Id: I4ba820f178b03424d01bb4ddd1f1d6eadde572f7
Signed-off-by: Rakesh Goyal <rgoyal@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2133196
GVS: Gerrit_Virtual_Submit
Reviewed-by: Narayan Reddy <narayanr@nvidia.com>
Reviewed-by: Srinivas Ramachandran <srinivasra@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
1. ARP offload can be configured via private ioctl.
Application requesting the arp offload configuration
should provide the IP address to be configured for
ARP offload via ioctl data struct. Refer to
struct ether_ifr_data and
struct arp_offload_param for details.
2. Tx/Rx Checksum offload can be configured via ethtool
3. TCP Segmentation offload can be configured via ethtool
Bug 2571001
Change-Id: If639ab9049db97f200911af456ddb8cb8433fa12
Signed-off-by: Srinivas Ramachandran <srinivasra@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109676
Reviewed-by: Rakesh Goyal <rgoyal@nvidia.com>
Reviewed-by: Narayan Reddy <narayanr@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Ashutosh Jha <ajha@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
