The CL adds GTE driver support in OOT. The driver is copied from nvidia
directory in dev-main with below changes.
- Added removable module support
This driver as module is needed as per the oot development requirement.
Bug 3583612
Change-Id: I2772078fb96e1b172e45befe643b4c7c569866d9
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2706260
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Port the downstream nvpmodel driver to the OOT project.
The following items summarize the change:
- Original bwmgr APIs are removed
- Clock cap for other clocks except for EMC is removed since userspace
nvpmodel service will handle clock cap for other clocks
Bug 3779573
Signed-off-by: Johnny Liu <johnliu@nvidia.com>
Change-Id: Ib297dfed808dad03d1450860c24156da1a84b4ca
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2773538
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Using this patch we are doing below activities:-
1. Use as much as possible source code possible from
upstream driver.
2. If there is static function that needs to be exported
to downstream driver then make a local copy of that.
3. add support for extended ivc driver since upstream
driver does not have support for all required APIs.
Bug 3595577
JIRA ESLC-6884
Signed-off-by: Manish Bhardwaj <mbhardwaj@nvidia.com>
Change-Id: Id6c70525e378a80d9059f49f879909c88c55cb4f
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2764453
Reviewed-by: Suresh Venkatachalam <skathirampat@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Adding RTC driver support for Nvidia based Voltage Regulator Power
Sequencer. Driver depends on CONFIG_MFD_NVVRS_PSEQ to get enabled which
is a parent driver for RTC. Following are the VRS RTC functionalies:
1. RTC executes alarm function to wake system from suspend/shutdown state.
2. RTC has 32bit time counter register which increments each second.
3. RTC triggers interrupt when the set alarm time becomes equal to the time
read from TIME registers.
Bug 200669555
Change-Id: I7890c084e5a1ec075823fee3ae5171fe7a89c6e0
Signed-off-by: Shubhi Garg <shgarg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2748752
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit
Copy the sources of host1x module from kernel/nvidia to
kernel/nvidia-oot to build host1x as OOT module.
Files get copied at build time.
Change-Id: Iecd491630b8296f1da8f543003b26c2be8f62db5
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2715738
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add support to build the nvsciipc driver as module with
OOT kernel.
The source file and makefile for building the nvsccipc driver
as module is copied from kernel/nvidia in build time.
Bug 3583631
Change-Id: I70f16496948c69bc8cd4c96155f00d1ed03390e7
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2713487
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add empty makefile and its path for building nvmap.
The source code and makefile with proper entries are
copied from the kernel/nvidia to out folder during build.
This will help to build the module for OOT from the source
code available in the kernel/nvidia which supports multiple
versions of kernel and avoid duplication of code.
Bug 3583631
Change-Id: I4ded3c1e49fc60e58d205a0b5e646e7bb616d8c8
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2712957
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add SPI Aurix protocol driver which communicates to the Aurix based on
SPI communication.
Currently, the hv_pm_ctrl APIs are implemented as dummy till
virtual HV driver is available.
Bug 3583584
Change-Id: I5b786b566cbf77f5627d518f8c98cb1fdd55dfa8
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2708696
GVS: Gerrit_Virtual_Submit
Add I2C slave driver for NVIDIA Tegra which works
in byte mode of data transfer i.e. rx/tx interrupts
per byte.
Bug 3631219
Change-Id: Ic40b868a3d195495550148a89d41f9d5d799d7ac
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2705958
GVS: Gerrit_Virtual_Submit
Add kfuse driver. The kfuse block stores downstream
and upstream HDCP keys for use by the HDMI module.
Bug 3625675
Change-Id: Ie4b23c161035439266ec7dda54b61e84799a6d5a
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2705641
GVS: Gerrit_Virtual_Submit
RAS are three aspects of the dependability of a system:
Reliability: continuity of correct service
Availability: readiness for correct service
Serviceability: ability to undergo modifications and repairs
ARMv8.2 provides RAS extensions to achieve the above features in a system.
arm64_ras driver allows you to handle Correctable errors using per core
Fault Handling Interrupt (or FHI). Un-correactable errors are handled by
raising SError exception to kernel or Trusted Firmware(EL3) on CCLEX.
The driver provides an API for CPU specific RAS drivers to
register callbacks in case of FHI. When FHI occurs, the FHI
ISR goes through the list of registered callbacks and executes
them. Similarly, the driver allows registering SError callbacks
for Un-correctable errors within Core, Core-Cluster & CCPLEX.
When SError is reported, then those callbacks are scanned to
find and report error in a Core, Cluster or CCPLEX
Bug 3625675
Change-Id: I6dba7178fa7bbcf55bfa083be1b077874f4865c9
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2705396
GVS: Gerrit_Virtual_Submit
