Issue:
OSD Driver maintains a local MC address list to avoid the programming
old addresses again into HW when new MC address list passed from the
network stack.
Its observed MC address index for a specific address is different once a
MC address deleted from the list. Because of this new MC address which
is passed in new list is overwriting the old MC address.
Fix:
Program the entire list every time when network stack passes it instead
of maintaining local list at driver.
Bug 3609583
Change-Id: I97cb3ea4d35641ad156d16c54c89e8593ad64459
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2702851
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Narayan Reddy <narayanr@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
GVS: Gerrit_Virtual_Submit
1) Add threaded interrupt handler function to call EPL API
to report error.
2) add hsi_enable sysfs interface to enable HSI feature at runtime
to enable:
echo enable > /sys/devices/platform/./nvethernet/hsi_enable
to disable:
echo disable > /sys/devices/platform/./nvethernet/hsi_enable
3) For mac RX CRC and checksum error, error reporting frequency is
every one second for HSI_ERROR_THRESHOLD error count
4) Added DT property “nvidia,hsi_err_time_threshold” to specify time
threshold for error reporting
5) Added DT property "nvidia,hsi_err_count_threshold" to specify
error count threshold for error reporting
Bug 3543410
Change-Id: I73ef1a674a846295e02deff7e07954e8dada9792
Signed-off-by: Om Prakash Singh <omp@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2675040
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Narayan Reddy <narayanr@nvidia.com>
Reviewed-by: Rakesh Goyal <rgoyal@nvidia.com>
Reviewed-by: Ashutosh Jha <ajha@nvidia.com>
GVS: Gerrit_Virtual_Submit
Issue: If MTU is increased after Supplicant is initialized
we are not updating the MACSEC MTU so the frames will get
dropped as the MACSEC MTU is lesser than the frames received
Fix: Changes to update the MACSEC MTU along with MAC MTU
Bug 3577143
Change-Id: I8cdd8ce331cbf40139e6f486439113d5b29a0687
Signed-off-by: Sanath Kumar Gampa <sgampa@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2686289
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Issue: for MGBE with 10 channel enabled TCP tx
is failing with 16k MTU because payload checksum
errors getting incremented due to lesser MTL buffer
available for each dma channel
Fix: Allow MTU more than 9000 for single channel
configuration only
Bug 3536247
Change-Id: I675342cb401723aaa58171f00721786b4d69f57d
Signed-off-by: Om Prakash Singh <omp@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2672802
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Issue: Adjust link from the phy subsystem can be called
multiple times either with link down or up. If its called
second time with same link down then code tries to disable
the same clks again which results in clock warinigs.
Fix: Maintain the state of the clk and then disable/enable
the clock based on the state.
Bug 3585098
Change-Id: I7d259e6066c7b67d0a970122eb0841e4b5871b43
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2688290
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Issue: MAC loopback is not getting enabled with below sequence
step1> enable MAC loopback via ioctl call
step2> bring down then bring up interface
step3> re-enable MAC loopback via ioctl call
Fix:
Reset MAC loopback variable if it is enabled, while
interface is going down. So that IOCTL path can
reconfigure the MAC loopback settings in MAC HW.
Bug 3445596
Change-Id: I01ce6551aaded409af02183e166396a7597c3b51
Signed-off-by: Narayan Reddy <narayanr@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2640912
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Issue:
- Workqueue for Tx timestamp is running without
delay, use many CPU cycle at hard isr thread
priority.
- Incorrect return value from ether_handle_tso()
Fix:
- Update code to use delayed workqueue
- Return correct value
Bug 200780891
Bug 3400623
Change-Id: I2095a0634e079bf870ef87cd2de1d35fe24bafd4
Signed-off-by: Rakesh Goyal <rgoyal@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2610986
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Issue:
1) usuage of SUPPORTED_* in PHY driver for setting
the link mode parameters leading data corruption. So
replaced SUPPORTED_* with linkmode_*_bit in PHY driver.
2) Redundant code of setting Pause of PHY
Fix:
1) Change SUPPORTED_* to ETHTOOL_LINK_MODE_*_BIT for
consistent check between PHY and Ethernet driver for K5.10.
2) removed pause setting of PHY, since this is already
taken care in corresponding PHY drivers.
Bug 200781153
Change-Id: Ic6a212dd4560fb3a06a4f60be3bdd33620a38197
Signed-off-by: Narayan Reddy <narayanr@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2607712
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Issue: mdio bus is registered in probe and before exiting
probe ethernet clocks are disabled to save power. When SC7
is initiated then PHY framework invokes a PHY suspend which
triggers the PHY register write. Since clocks are not enabled
PHY register write is ignored and returned failure which
inturn prevented the entire system to enter into SC7
Fix: Move mdio bus registration to open so that PHY reads/writes
will not be invoked before bringing up the ethernet interface.
Bug 3368603
Change-Id: Idc74be76f47ca1cb607502a4572cb2001d42903a
Signed-off-by: Narayan Reddy <narayanr@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2607300
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Bhadram Varka <vbhadram@nvidia.com>
Reviewed-by: Rakesh Goyal <rgoyal@nvidia.com>
Reviewed-by: Bibek Basu <bbasu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Issue:
To save more power PHY RXC will be disabled when PHY in LPI state by
setting 10th bit in below register. This is standard PHY register.
- PCS Control 1 register (MMD device 3, Address 0x00)
When EEE enabled above register being programmed (10th bit got set) and
it created issue while accessing the MAC registers through indirect
addressing since RXC stopped from PHY.
Fix:
Don't stop RXC in LPI for Orin EQOS
Bug 200776300
Bug 200765092
Change-Id: I4150eebe8e2a5ab79ad5b7180232adad2331e315
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2599137
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Narayan Reddy <narayanr@nvidia.com>
Reviewed-by: Rakesh Goyal <rgoyal@nvidia.com>
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Issue:
- TX packet fragments are not working
on Orin platform.
- Express packets pass through even time
interval is not sufficient to send packet
Fix:
- Set OSI_PKT_CX_LEN and tx_pkt_cx->payload_len
for non TSO packet. this will update frame
length in TDECS3
Bug 200765943
Bug 200763256
Change-Id: I82cc91e176d9ac84d654ef7f60686ebc4024d3da
Signed-off-by: Rakesh Goyal <rgoyal@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2592048
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Issue: SID needs to be programmed through HV window
to get it reflected in controller register space.
Currently its programmed through RM window.
Fix: Get HV window base address from DT and program
in controller registers in non-hypervisor mode.
Store MAC instance ID to program the same ASID
values which are used in DT.
Bug 200761024
Change-Id: Ie9bcaebcba39f2d07438c9502591c0f51f22378f
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2592481
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Issue: MGBE supports upto 16K jumbo size.
There is enough MTL queue space also
for 16K packet even with all 10 queues
enabled in MGBE. So no need to restrict
> 9k jumbo to single channel config only.
FIx: For MGBE, unconditionally allow upto 16K
jumbo size setting.
Bug 200760072
Change-Id: I734ce3be13605e4db992a1679e2de0736bd2583f
Signed-off-by: Srinivas Ramachandran <srinivasra@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2579108
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Issue
- Driver probe defer causes failed prints on kernel boot logs
if clk/reset controller driver module is not initialized
before nvethernet module probe.
Fix
- The probe defer is part of kernel mechanism to retry module
initialization and hardware setup. This is not an error
or failure for software driver.
Only in case of probe failure, throw error logs in console
Bug 200728771
Bug 200732811
Change-Id: I9c421db6ceedc108553f9f2b33f4f3993d63c02f
Signed-off-by: Sushil Singh <sushilkumars@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2563340
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
