nv-tegra-mirror/linux-nv-oot
1
0
Fork 0
mirror of git://nv-tegra.nvidia.com/linux-nv-oot.git synced 2025-12-22 09:11:26 +03:00
Code Issues Packages Projects Releases Wiki Activity
Files
2909c904dc82be6990e1aefbdf1c632167137b09
linux-nv-oot/include/soc/tegra/camrtc-capture.h
Igor Mitsyanko 2909c904dc coe: move Rx descriptor mem from uncached region 
RCE no longer manipulates Rx descriptor ring with CPU accesses, but uses
a DMA engine instead. Rx descriptor mem can be moved out of uncached
RCE region.
As RCE uncached region is now empty - remove it.

Jira CT26X-1892

Change-Id: I3651468680349041ae77d39eefc6fd1ccfba7eb2
Signed-off-by: Igor Mitsyanko <imitsyanko@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3419641
Tested-by: Raki Hassan <rakibulh@nvidia.com>
Reviewed-by: Narendra Kondapalli <nkondapalli@nvidia.com>
Reviewed-by: Raki Hassan <rakibulh@nvidia.com>
GVS: buildbot_gerritrpt <buildbot_gerritrpt@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
2025-07-30 07:15:30 -07:00

6005 lines
197 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/* SPDX-FileCopyrightText: Copyright (c) 2016-2025 NVIDIA CORPORATION & AFFILIATES.
* All rights reserved.
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
/**
* @file camrtc-capture.h
*
* @brief Camera firmware API header
*/
#ifndef INCLUDE_CAMRTC_CAPTURE_H
#define INCLUDE_CAMRTC_CAPTURE_H
#include "camrtc-common.h"
#pragma GCC diagnostic error "-Wpadded"
/** Shared memory structure alignment */
#define CAPTURE_IVC_ALIGNOF MK_ALIGN(8)
/** Capture descriptor alignment requirement */
#define CAPTURE_DESCRIPTOR_ALIGN_BYTES (64)
/** Capture descriptor alignment */
#define CAPTURE_DESCRIPTOR_ALIGNOF MK_ALIGN(CAPTURE_DESCRIPTOR_ALIGN_BYTES)
/** Shared memory structure alignment specifier */
#define CAPTURE_IVC_ALIGN CAMRTC_ALIGN(CAPTURE_IVC_ALIGNOF)
/** Shared memory structure alignment specifier */
#define CAPTURE_DESCRIPTOR_ALIGN CAMRTC_ALIGN(CAPTURE_DESCRIPTOR_ALIGNOF)
/** IOVA address type */
typedef uint64_t iova_t CAPTURE_IVC_ALIGN;
/** Invalid syncpoint ID */
#define SYNCPOINT_ID_INVALID MK_U32(0)
/** Invalid Grid-of-Semaphores index */
#define GOS_INDEX_INVALID MK_U8(0xFF)
#pragma GCC diagnostic warning "-Wdeprecated-declarations"
#define CAMRTC_DEPRECATED __attribute__((deprecated))
/*Status Fence Support*/
#define STATUS_FENCE_SUPPORT
typedef struct syncpoint_info {
/** Syncpoint ID or @ref SYNCPOINT_ID_INVALID. */
uint32_t id;
/** Syncpoint threshold when storing a fence [0, UIN32_MAX] */
uint32_t threshold;
/**
* Grid-of-Semaphores (GoS) SMMU stream id [1, 127] (non-safety).
*
* @deprecated This field may be removed in the future.
*/
uint8_t gos_sid;
/**
* Index into a table of GoS page base pointers or
* @ref GOS_INDEX_INVALID.
* (see @ref capture_channel_config::vi_gos_tables) (non-safety)
*
* @deprecated This field may be removed in the future.
*/
uint8_t gos_index;
/**
* Offset of a semaphore within a Grid-of-Semaphores [0, 63].
* (non-safety)
*
* @deprecated This field may be removed in the future.
*/
uint16_t gos_offset;
/** Reserved */
uint32_t pad_;
/**
* IOVA address of the Host1x syncpoint register.
* Must be a multiple of 4.
*/
iova_t shim_addr;
} syncpoint_info_t CAPTURE_IVC_ALIGN;
/**
* @defgroup StatsSize Statistics data size defines for ISP5
*
* The size for each unit includes the standard ISP5 HW stats
* header size.
*
* Size break down for each unit.
* FB = 32 byte header + (256 x 4) bytes. FB has 256 windows with 4 bytes
* of stats data per window.
* FM = 32 byte header + (64 x 64 x 2 x 4) bytes. FM can have 64 x 64 windows
* with each window having 2 bytes of data for each color channel.
* AFM = 32 byte header + 8 byte statistics data + 8 bytes padding per ROI.
* LAC = 32 byte header + ( (32 x 32) x ((4 + 2 + 2) x 4) )
* Each ROI has 32x32 windows with each window containing 8
* bytes of data per color channel.
* Hist = Header + (256 x 4 x 4) bytes since Hist unit has 256 bins and
* each bin collects 4 byte data for each color channel + 4 Dwords for
* excluded pixel count due to elliptical mask per color channel.
* Pru = 32 byte header + (8 x 4) bytes for bad pixel count and accumulated
* pixel adjustment for pixels both inside and outside the ROI.
* LTM = 32 byte header + (128 x 4) bytes for histogram data + (8 x 8 x 4 x 2)
* bytes for soft key average and count. Soft key statistics are
* collected by dividing the frame into a 8x8 array region.
* @{
*/
/** Statistics unit hardware header size in bytes */
#define ISP5_STATS_HW_HEADER_SIZE MK_SIZE(32)
/** Flicker band (FB) unit statistics data size in bytes */
#define ISP5_STATS_FB_MAX_SIZE MK_SIZE(1056)
/** Focus Metrics (FM) unit statistics data size in bytes */
#define ISP5_STATS_FM_MAX_SIZE MK_SIZE(32800)
/** Auto Focus Metrics (AFM) unit statistics data size in bytes */
#define ISP5_STATS_AFM_ROI_MAX_SIZE MK_SIZE(48)
/** Local Average Clipping (LAC) unit statistics data size in bytes */
#define ISP5_STATS_LAC_ROI_MAX_SIZE MK_SIZE(32800)
/** Histogram unit statistics data size in bytes */
#define ISP5_STATS_HIST_MAX_SIZE MK_SIZE(4144)
/** Pixel Replacement Unit (PRU) unit statistics data size in bytes */
#define ISP5_STATS_OR_MAX_SIZE MK_SIZE(64)
/** Local Tone Mapping (LTM) unit statistics data size in bytes */
#define ISP5_STATS_LTM_MAX_SIZE MK_SIZE(1056)
/* Stats buffer addresses must be aligned to 64 byte (ATOM) boundaries */
#define ISP5_ALIGN_STAT_OFFSET(_offset) \
(((uint32_t)(_offset) + MK_U32(63)) & ~(MK_U32(63)))
/** Flicker band (FB) unit statistics data offset */
#define ISP5_STATS_FB_OFFSET MK_SIZE(0)
/** Focus Metrics (FM) unit statistics data offset */
#define ISP5_STATS_FM_OFFSET \
(ISP5_STATS_FB_OFFSET + ISP5_ALIGN_STAT_OFFSET(ISP5_STATS_FB_MAX_SIZE))
/** Auto Focus Metrics (AFM) unit statistics data offset */
#define ISP5_STATS_AFM_OFFSET \
(ISP5_STATS_FM_OFFSET + ISP5_ALIGN_STAT_OFFSET(ISP5_STATS_FM_MAX_SIZE))
/** Local Average Clipping (LAC0) unit statistics data offset */
#define ISP5_STATS_LAC0_OFFSET \
(ISP5_STATS_AFM_OFFSET + \
(ISP5_ALIGN_STAT_OFFSET(ISP5_STATS_AFM_ROI_MAX_SIZE) * MK_SIZE(8)))
/** Local Average Clipping (LAC1) unit statistics data offset */
#define ISP5_STATS_LAC1_OFFSET \
(ISP5_STATS_LAC0_OFFSET + \
(ISP5_ALIGN_STAT_OFFSET(ISP5_STATS_LAC_ROI_MAX_SIZE) * MK_SIZE(4)))
/** Histogram unit (H0) statistics data offset */
#define ISP5_STATS_HIST0_OFFSET \
(ISP5_STATS_LAC1_OFFSET + \
(ISP5_ALIGN_STAT_OFFSET(ISP5_STATS_LAC_ROI_MAX_SIZE) * MK_SIZE(4)))
/** Histogram unit (H1) statistics data offset */
#define ISP5_STATS_HIST1_OFFSET \
(ISP5_STATS_HIST0_OFFSET + \
ISP5_ALIGN_STAT_OFFSET(ISP5_STATS_HIST_MAX_SIZE))
/** Pixel Replacement Unit (PRU) unit statistics data offset */
#define ISP5_STATS_OR_OFFSET \
(ISP5_STATS_HIST1_OFFSET + \
ISP5_ALIGN_STAT_OFFSET(ISP5_STATS_HIST_MAX_SIZE))
/** Local Tone Mapping (LTM) unit statistics data offset */
#define ISP5_STATS_LTM_OFFSET \
(ISP5_STATS_OR_OFFSET + \
ISP5_ALIGN_STAT_OFFSET(ISP5_STATS_OR_MAX_SIZE))
/** Total statistics data size in bytes */
#define ISP5_STATS_TOTAL_SIZE \
(ISP5_STATS_LTM_OFFSET + ISP5_STATS_LTM_MAX_SIZE)
/**@}*/
/**
* @defgroup StatsSize Statistics data size defines for ISP6
*
* The size for each unit includes the standard ISP6 HW stats
* header size.
*
* Size break down for each unit.
* FB = 32 byte header + (512 x 4) bytes. FB has 512 windows with 4 bytes
* of stats data per window.
* FM = 32 byte header + (64 x 64 x 2 x 4) bytes. FM can have 64 x 64 windows
* with each window having 2 bytes of data for each color channel.
* AFM = 32 byte header + 8 byte statistics data + 8 byte pad per ROI.
* LAC = 32 byte header + ( (32 x 32) x ((4 + 2 + 2) x 4) )
* Each ROI has 32x32 windows with each window containing 8
* bytes of data per color channel.
* Hist = Header + (256 x 4 x 4) bytes since Hist unit has 256 bins and
* each bin collects 4 byte data for each color channel + 4 Dwords for
* excluded pixel count due to elliptical mask per color channel.
* OR = 32 byte header + (8 x 4) bytes for bad pixel count and accumulated
* pixel adjustment for pixels both inside and outside the ROI.
* PRU hist = Header + (256 x 4 x 4) bytes since Hist unit has 256 bins and
* each bin collects 4 byte data for each color channel + 4 Dwords for
* excluded pixel count due to elliptical mask per color channel.
* LTM = 32 byte header + (128 x 4) bytes for histogram data + (8 x 8 x 4 x 2)
* bytes for soft key average and count. Soft key statistics are
* collected by dividing the frame into a 8x8 array region.
* @{
*/
/** Statistics unit hardware header size in bytes */
#define ISP6_STATS_HW_HEADER_SIZE MK_SIZE(32)
/** Flicker band (FB) unit statistics data size in bytes */
#define ISP6_STATS_FB_MAX_SIZE MK_SIZE(2080)
/** Focus Metrics (FM) unit statistics data size in bytes */
#define ISP6_STATS_FM_MAX_SIZE MK_SIZE(32800)
/** Auto Focus Metrics (AFM) unit statistics data size in bytes */
#define ISP6_STATS_AFM_ROI_MAX_SIZE MK_SIZE(48)
/** Local Average Clipping (LAC) unit statistics data size in bytes */
#define ISP6_STATS_LAC_ROI_MAX_SIZE MK_SIZE(32800)
/** Histogram unit statistics data size in bytes */
#define ISP6_STATS_HIST_MAX_SIZE MK_SIZE(4144)
/** Pixel Replacement Unit (PRU) unit statistics data size in bytes */
#define ISP6_STATS_OR_MAX_SIZE MK_SIZE(64)
/** PRU histogram (HIST_RAW24) unit statistics data size in bytes */
#define ISP6_STATS_HIST_RAW24_MAX_SIZE MK_SIZE(1056)
/** Local Tone Mapping (LTM) unit statistics data size in bytes */
#define ISP6_STATS_LTM_MAX_SIZE MK_SIZE(1056)
/* Stats buffer addresses muse be aligned to 64 byte (ATOM) boundaries */
#define ISP6_ALIGN_STAT_OFFSET(_offset) \
(((uint32_t)(_offset) + MK_U32(63)) & ~(MK_U32(63)))
/** Flicker band (FB) unit statistics data offset */
#define ISP6_STATS_FB_OFFSET MK_SIZE(0)
/** Focus Metrics (FM) unit statistics data offset */
#define ISP6_STATS_FM_OFFSET \
(ISP6_STATS_FB_OFFSET + ISP6_ALIGN_STAT_OFFSET(ISP6_STATS_FB_MAX_SIZE))
/** Auto Focus Metrics (AFM) unit statistics data offset */
#define ISP6_STATS_AFM_OFFSET \
(ISP6_STATS_FM_OFFSET + ISP6_ALIGN_STAT_OFFSET(ISP6_STATS_FM_MAX_SIZE))
/** Local Average Clipping (LAC0) unit statistics data offset */
#define ISP6_STATS_LAC0_OFFSET \
(ISP6_STATS_AFM_OFFSET + \
(ISP6_ALIGN_STAT_OFFSET(ISP6_STATS_AFM_ROI_MAX_SIZE) * MK_SIZE(8)))
/** Local Average Clipping (LAC1) unit statistics data offset */
#define ISP6_STATS_LAC1_OFFSET \
(ISP6_STATS_LAC0_OFFSET + \
(ISP6_ALIGN_STAT_OFFSET(ISP6_STATS_LAC_ROI_MAX_SIZE) * MK_SIZE(4)))
/** Histogram unit (H0) statistics data offset */
#define ISP6_STATS_HIST0_OFFSET \
(ISP6_STATS_LAC1_OFFSET + \
(ISP6_ALIGN_STAT_OFFSET(ISP6_STATS_LAC_ROI_MAX_SIZE) * MK_SIZE(4)))
/** Histogram unit (H1) statistics data offset */
#define ISP6_STATS_HIST1_OFFSET \
(ISP6_STATS_HIST0_OFFSET + \
ISP6_ALIGN_STAT_OFFSET(ISP6_STATS_HIST_MAX_SIZE))
/** Outlier replacement (OR) unit statistics data offset */
#define ISP6_STATS_OR_OFFSET \
(ISP6_STATS_HIST1_OFFSET + \
ISP6_ALIGN_STAT_OFFSET(ISP6_STATS_HIST_MAX_SIZE))
/** Raw data 24 bit histogram (HIST_RAW24) unit statistics data offset */
#define ISP6_STATS_HIST_RAW24_OFFSET \
(ISP6_STATS_OR_OFFSET + \
ISP6_ALIGN_STAT_OFFSET(ISP6_STATS_OR_MAX_SIZE))
/** Local Tone Mapping (LTM) unit statistics data offset */
#define ISP6_STATS_LTM_OFFSET \
(ISP6_STATS_HIST_RAW24_OFFSET + \
ISP6_ALIGN_STAT_OFFSET(ISP6_STATS_HIST_RAW24_MAX_SIZE))
/** Total statistics data size in bytes */
#define ISP6_STATS_TOTAL_SIZE \
(ISP6_STATS_LTM_OFFSET + ISP6_STATS_LTM_MAX_SIZE)
/**@}*/
/**
* @defgroup StatsSize Statistics data size defines for ISP7
*
* The size for each unit includes the standard ISP7 HW stats
* header size.
*
* Size break down for each unit.
* FB = 32 byte header + (512 x 4) bytes. FB has 512 windows with 4 bytes
* of stats data per window.
* FM = 32 byte header + (64 x 64 x 2 x 4) bytes. FM can have 64 x 64 windows
* with each window having 2 bytes of data for each color channel.
* AFM = 32 byte header + 8 byte statistics data + 8 byte padding per ROI.
* LAC = 32 byte header + ( (32 x 32) x ((4 + 2 + 2) x 4) )
* Each ROI has 32x32 windows with each window containing 8
* bytes of data per color channel.
* Hist = Header + (256 x 4 x 4) bytes since Hist unit has 256 bins and
* each bin collects 4 byte data for each color channel + 4 Dwords for
* excluded pixel count due to elliptical mask per color channel.
* DPC = 32 byte header + (24 x 4) bytes for bad pixel count and accumulated
* pixel adjustment for pixels both inside and outside the ROI.
* LTM = 32 byte header + (128 x 4) bytes for histogram data + (8 x 8 x 4 x 2)
* bytes for soft key average and count. Soft key statistics are
* collected by dividing the frame into a 8x8 array region.
* @{
*/
/** Statistics unit hardware header size in bytes */
#define ISP7_STATS_HW_HEADER_SIZE MK_SIZE(32)
/** Flicker band (FB) unit statistics data size in bytes */
#define ISP7_STATS_FB_MAX_SIZE MK_SIZE(2080)
/** Focus Metrics (FM) unit statistics data size in bytes */
#define ISP7_STATS_FM_MAX_SIZE MK_SIZE(32800)
/** Auto Focus Metrics (AFM) unit statistics data size in bytes */
#define ISP7_STATS_AFM_ROI_MAX_SIZE MK_SIZE(48)
/** Local Average Clipping (LAC) unit statistics data size in bytes */
#define ISP7_STATS_LAC_ROI_MAX_SIZE MK_SIZE(32800)
/** Histogram unit statistics data size in bytes */
#define ISP7_STATS_HIST_MAX_SIZE MK_SIZE(4144)
/** Pixel Replacement Unit (PRU) unit statistics data size in bytes */
#define ISP7_STATS_DPC_MAX_SIZE MK_SIZE(128)
/** Local Tone Mapping (LTM) unit statistics data size in bytes */
#define ISP7_STATS_LTM_MAX_SIZE MK_SIZE(1056)
/* Stats buffer addresses must be aligned to 64 byte (ATOM) boundaries */
#define ISP7_ALIGN_STAT_OFFSET(_offset) \
(((uint32_t)(_offset) + MK_U32(63)) & ~(MK_U32(63)))
/** Flicker band (FB) unit statistics data offset */
#define ISP7_STATS_FB_OFFSET MK_SIZE(0)
/** Focus Metrics (FM) unit statistics data offset */
#define ISP7_STATS_FM_OFFSET \
(ISP7_STATS_FB_OFFSET + ISP7_ALIGN_STAT_OFFSET(ISP7_STATS_FB_MAX_SIZE))
/** Auto Focus Metrics (AFM) unit statistics data offset */
#define ISP7_STATS_AFM_OFFSET \
(ISP7_STATS_FM_OFFSET + ISP7_ALIGN_STAT_OFFSET(ISP7_STATS_FM_MAX_SIZE))
/** Local Average Clipping (LAC0) unit statistics data offset */
#define ISP7_STATS_LAC0_OFFSET \
(ISP7_STATS_AFM_OFFSET + \
(ISP7_ALIGN_STAT_OFFSET(ISP7_STATS_AFM_ROI_MAX_SIZE) * MK_SIZE(8)))
/** Local Average Clipping (LAC1) unit statistics data offset */
#define ISP7_STATS_LAC1_OFFSET \
(ISP7_STATS_LAC0_OFFSET + \
(ISP7_ALIGN_STAT_OFFSET(ISP7_STATS_LAC_ROI_MAX_SIZE) * MK_SIZE(4)))
/** Histogram unit (H0) statistics data offset */
#define ISP7_STATS_HIST0_OFFSET \
(ISP7_STATS_LAC1_OFFSET + \
(ISP7_ALIGN_STAT_OFFSET(ISP7_STATS_LAC_ROI_MAX_SIZE) * MK_SIZE(4)))
/** Histogram unit (H1) statistics data offset */
#define ISP7_STATS_HIST1_OFFSET \
(ISP7_STATS_HIST0_OFFSET + \
ISP7_ALIGN_STAT_OFFSET(ISP7_STATS_HIST_MAX_SIZE))
/** Histogram unit (H2) statistics data offset */
#define ISP7_STATS_HIST2_OFFSET \
(ISP7_STATS_HIST1_OFFSET + \
ISP7_ALIGN_STAT_OFFSET(ISP7_STATS_HIST_MAX_SIZE))
/** Outlier replacement (OR) unit statistics data offset */
#define ISP7_STATS_DPC_OFFSET \
(ISP7_STATS_HIST2_OFFSET + \
ISP7_ALIGN_STAT_OFFSET(ISP7_STATS_HIST_MAX_SIZE))
/** Local Tone Mapping (LTM) unit statistics data offset */
#define ISP7_STATS_LTM_OFFSET \
(ISP7_STATS_DPC_OFFSET + \
ISP7_ALIGN_STAT_OFFSET(ISP7_STATS_DPC_MAX_SIZE))
/** Total statistics data size in bytes */
#define ISP7_STATS_TOTAL_SIZE \
(ISP7_STATS_LTM_OFFSET + ISP7_STATS_LTM_MAX_SIZE)
/**@}*/
/** Maximum number of Grid-of-Semaphores tables supported by ISP */
#define ISP_NUM_GOS_TABLES MK_U32(8)
/**
* @defgroup ISPUnitIds
* ISP Unit Identifiers
*/
/**@{*/
/** ISP unit 0 */
#define ISP_UNIT_ISP MK_U32(0x0000)
/** ISP unit 1 */
#define ISP_UNIT_ISP1 MK_U32(0x0001)
/**@}*/
/** Maximum number of Grid-of-semaphores tables supported by VI */
#define VI_NUM_GOS_TABLES MK_U32(12)
/** Maximum number of output surfaces supported by VI */
#define VI_NUM_ATOMP_SURFACES 4U
/** Maximum number of engine status surfaces support by VI */
#define VI_NUM_STATUS_SURFACES 1U
/** Maximum number of PFSD surfaces supported by VI */
#define VI_NUM_VI_PFSD_SURFACES 2U
/**
* @defgroup ViAtompSurface VI ATOMP surface related defines
* @{
*/
/** Output surface plane 0 */
#define VI_ATOMP_SURFACE0 0U
/** Output surface plane 1 */
#define VI_ATOMP_SURFACE1 1U
/** Output surface plane 2 */
#define VI_ATOMP_SURFACE2 2U
/** Sensor embedded data */
#define VI_ATOMP_SURFACE_EMBEDDED 3
/** RAW pixels */
#define VI_ATOMP_SURFACE_MAIN VI_ATOMP_SURFACE0
/** PDAF pixels */
#define VI_ATOMP_SURFACE_PDAF VI_ATOMP_SURFACE1
/** YUV - Luma plane */
#define VI_ATOMP_SURFACE_Y VI_ATOMP_SURFACE0
/** Semi-planar - UV plane */
#define VI_ATOMP_SURFACE_UV VI_ATOMP_SURFACE1
/** Planar - U plane */
#define VI_ATOMP_SURFACE_U VI_ATOMP_SURFACE1
/** Planar - V plane */
#define VI_ATOMP_SURFACE_V VI_ATOMP_SURFACE2
/** @} */
/* SLVS-EC */
#define SLVSEC_STREAM_DISABLED MK_U8(0xFF)
/**
* @defgroup VICaptureChannelFlags VI Capture channel specific flags
*/
/**@{*/
/** Channel takes input from Video Interface (VI) */
#define CAPTURE_CHANNEL_FLAG_VIDEO MK_U32(0x0001)
/** Channel supports RAW Bayer output */
#define CAPTURE_CHANNEL_FLAG_RAW MK_U32(0x0002)
/** Channel supports planar YUV output */
#define CAPTURE_CHANNEL_FLAG_PLANAR MK_U32(0x0004)
/** Channel supports semi-planar YUV output */
#define CAPTURE_CHANNEL_FLAG_SEMI_PLANAR MK_U32(0x0008)
/** Channel supports phase-detection auto-focus (non-safety) */
#define CAPTURE_CHANNEL_FLAG_PDAF MK_U32(0x0010)
/** Channel outputs sensor embedded data */
#define CAPTURE_CHANNEL_FLAG_EMBDATA MK_U32(0x0040)
/** Channel outputs to ISPA (deprecated, non-safety) */
#define CAPTURE_CHANNEL_FLAG_ISPA MK_U32(0x0080)
/** Channel outputs to ISPB (deprecated, non-safety) */
#define CAPTURE_CHANNEL_FLAG_ISPB MK_U32(0x0100)
/**
* Channel outputs directly to selected ISP (ISO mode)
* (deprecated, non-safety)
*/
#define CAPTURE_CHANNEL_FLAG_ISP_DIRECT MK_U32(0x0200)
/** Channel outputs to software ISP (reserved) */
#define CAPTURE_CHANNEL_FLAG_ISPSW MK_U32(0x0400)
/**
* Channel treats all errors as stop-on-error and requires reset
* for recovery (non-safety)
*/
#define CAPTURE_CHANNEL_FLAG_RESET_ON_ERROR MK_U32(0x0800)
/** Channel has line timer enabled */
#define CAPTURE_CHANNEL_FLAG_LINETIMER MK_U32(0x1000)
/** Channel supports SLVSEC sensors (non-safety) */
#define CAPTURE_CHANNEL_FLAG_SLVSEC MK_U32(0x2000)
/**
* Channel reports errors to System Error Handler based on
* @ref capture_channel_config::error_mask_correctable and
* @ref capture_channel_config::error_mask_uncorrectable.
*/
#define CAPTURE_CHANNEL_FLAG_ENABLE_HSM_ERROR_MASKS MK_U32(0x4000)
/**
* Enable Permanent Fault Software diagnostics (PFSD) for this VI channel.
* VI will insert a test pattern into a specified part of the frame, to
* be checked after frame capture. A correct test pattern will verify
* that VI internal pipeline is functioning normally.
*/
#define CAPTURE_CHANNEL_FLAG_ENABLE_VI_PFSD MK_U32(0x8000)
/** Channel binds to a CSI stream and channel */
#define CAPTURE_CHANNEL_FLAG_CSI MK_U32(0x10000)
/**@}*/
/**
* @defgroup CaptureChannelErrMask VI error numbers
*/
/**@{*/
/** VI Frame start error timeout */
#define CAPTURE_CHANNEL_ERROR_VI_FRAME_START_TIMEOUT MK_BIT32(23)
/** VI Permanent Fault SW Diagnostics (PFSD) error */
#define CAPTURE_CHANNEL_ERROR_VI_PFSD_FAULT MK_BIT32(22)
/** Embedded data incomplete */
#define CAPTURE_CHANNEL_ERROR_ERROR_EMBED_INCOMPLETE MK_BIT32(21)
/** Pixel frame is incomplete */
#define CAPTURE_CHANNEL_ERROR_INCOMPLETE MK_BIT32(20)
/**
* A Frame End appears from NVCSI before the normal number of pixels
* has appeared
*/
#define CAPTURE_CHANNEL_ERROR_STALE_FRAME MK_BIT32(19)
/** A start-of-frame matches a channel that is already in frame */
#define CAPTURE_CHANNEL_ERROR_COLLISION MK_BIT32(18)
/** Frame end was forced by channel reset */
#define CAPTURE_CHANNEL_ERROR_FORCE_FE MK_BIT32(17)
/**
* A LOAD command is received for a channel while that channel is
* currently in a frame.
*/
#define CAPTURE_CHANNEL_ERROR_LOAD_FRAMED MK_BIT32(16)
/** The pixel datatype changed in the middle of the line */
#define CAPTURE_CHANNEL_ERROR_DTYPE_MISMATCH MK_BIT32(15)
/** Unexpected embedded data in frame */
#define CAPTURE_CHANNEL_ERROR_EMBED_INFRINGE MK_BIT32(14)
/** Extra embedded bytes on line */
#define CAPTURE_CHANNEL_ERROR_EMBED_LONG_LINE MK_BIT32(13)
/** Embedded bytes found between line start and line end*/
#define CAPTURE_CHANNEL_ERROR_EMBED_SPURIOUS MK_BIT32(12)
/** Too many embeded lines in frame */
#define CAPTURE_CHANNEL_ERROR_EMBED_RUNAWAY MK_BIT32(11)
/** Two embedded line starts without a line end in between */
#define CAPTURE_CHANNEL_ERROR_EMBED_MISSING_LE MK_BIT32(10)
/** A line has fewer pixels than expected width */
#define CAPTURE_CHANNEL_ERROR_PIXEL_SHORT_LINE MK_BIT32(9)
/** A line has more pixels than expected width, pixels dropped */
#define CAPTURE_CHANNEL_ERROR_PIXEL_LONG_LINE MK_BIT32(8)
/** A pixel found between line end and line start markers, dropped */
#define CAPTURE_CHANNEL_ERROR_PIXEL_SPURIOUS MK_BIT32(7)
/** Too many pixel lines in frame, extra lines dropped */
#define CAPTURE_CHANNEL_ERROR_PIXEL_RUNAWAY MK_BIT32(6)
/** Two lines starts without a line end in between */
#define CAPTURE_CHANNEL_ERROR_PIXEL_MISSING_LE MK_BIT32(5)
/**@}*/
/**
* @defgroup VIUnitIds VI Unit Identifiers
*/
/**@{*/
/** VI unit 0 */
#define VI_UNIT_VI MK_U32(0x0000)
/** VI unit 1 */
#define VI_UNIT_VI2 MK_U32(0x0001)
/**@}*/
/**
* @brief Identifies a specific CSI stream.
*/
struct csi_stream_config {
/** See @ref NvCsiStream "NvCSI Stream ID" */
uint32_t stream_id;
/**
* See @ref NvCsiPort "CSI Port". If the CSI port is specified,
* the value must map correctly to the @ref stream_id value.
*/
uint32_t csi_port;
/** See @ref NvCsiVirtualChannel "CSI Virtual Channel". */
uint32_t virtual_channel;
/** Reserved */
uint32_t pad__;
};
/**
* @brief Describes RTCPU side resources for a capture pipe-line.
*/
struct capture_channel_config {
/**
* A bitmask describing the set of non-shareable
* HW resources that the capture channel will need. These HW resources
* will be assigned to the new capture channel and will be owned by the
* channel until it is released with @ref CAPTURE_CHANNEL_RELEASE_REQ.
*
* VI channels can have different capabilities. The flags are checked
* against the VI channel capabilities to make sure the allocated VI
* channel meets the requirements.
*
* See @ref VICaptureChannelFlags "Capture Channel Flags".
*/
uint32_t channel_flags;
/** rtcpu internal data field - Should be set to zero */
uint32_t channel_id;
/** VI unit ID. See @ref ViUnitIds "VI Unit Identifiers" */
uint32_t vi_unit_id;
/** Reserved */
uint32_t pad__;
/**
* A bitmask indicating which VI hardware channels to consider for
* allocation [0, 0xFFFFFFFFF]. LSB is VI channel 0.
*
* Normal usage is to set all the bits, so as not to restrict the
* channel allocation. Note that a client VM may also have additional
* restrictions on the range of VI channels available to it.
*
* This control is provided for special use cases and for testing.
*/
uint64_t vi_channel_mask;
/**
* A bitmask indicating which VI2 hardware channels to consider for
* allocation [0, 0xFFFFFFFFF]. LSB is VI2 channel 0.
*
* Normal usage is to set all the bits, so as not to restrict the
* channel allocation. Note that a client VM may also have additional
* restrictions on the range of VI channels available to it.
*
* This control is provided for special use cases and for testing.
*/
uint64_t vi2_channel_mask;
/**
* CSI stream configuration identifies the CSI stream input for
* this channel.
*/
struct csi_stream_config csi_stream;
/**
* Base address of the @ref capture_descriptor ring buffer.
* The size of the buffer is @ref queue_depth * @ref request_size.
* The value must be non-zero and a multiple of
* @ref CAPTURE_DESCRIPTOR_ALIGN_BYTES.
*/
iova_t requests;
/**
* Base address of a memory mapped ring buffer containing capture
* requests buffer information. The size of the buffer is @ref
* queue_depth * @ref request_memoryinfo_size. The value must be
* non-zero and a multiple of @ref CAPTURE_DESCRIPTOR_ALIGN_BYTES.
*/
iova_t requests_memoryinfo;
/**
* Maximum number of capture requests in the requests queue [1, 240].
* Determines the size of the @ref capture_descriptor ring buffer
* (@ref requests).
*/
uint32_t queue_depth;
/**
* Size of the buffer reserved for each capture descriptor. The size
* must be >= sizeof(@ref capture_descriptor) and a multiple of
* @ref CAPTURE_DESCRIPTOR_ALIGN_BYTES.
*/
uint32_t request_size;
/**
* Size of the memoryinfo buffer reserved for each capture request.
* Must be >= sizeof(@ref capture_descriptor_memoryinfo) and
* a multiple of @ref CAPTURE_DESCRIPTOR_ALIGN_BYTES.
*/
uint32_t request_memoryinfo_size;
/** Reserved */
uint32_t reserved2;
/** SLVS-EC main stream (non-safety) */
uint8_t slvsec_stream_main;
/** SLVS-EC sub stream (non-safety) */
uint8_t slvsec_stream_sub;
/** Reserved */
uint16_t reserved1;
#define HAVE_VI_GOS_TABLES
/**
* Number of elements in @ref vi_gos_tables array
* [0, @ref VI_NUM_GOS_TABLES].
*
* @deprecated This field may be removed in the future.
*/
uint32_t num_vi_gos_tables;
/**
* Array of IOVA pointers to VI Grid-of-Semaphores (GoS) tables
* (non-safety).
*
* GoS table configuration, if present, must be the same on all
* active channels. The IOVA addresses must be a multiple of 256.
*
* @deprecated This field may be removed in the future.
*/
iova_t vi_gos_tables[VI_NUM_GOS_TABLES];
/**
* Capture progress syncpoint information. The progress syncpoint
* is incremented on Start-Of-Frame, whenever a slice of pixel
* data has been written to memory, and finally when the status
* of a capture has been written to memory. The same progress
* syncpoint will keep incrementing for every consecutive capture
* request.
*
* @ref syncpoint_info::threshold must be set to the initial
* value of the hardware syncpoint on channel setup.
**/
struct syncpoint_info progress_sp;
/**
* Embedded data syncpoint information. The embedded data syncpoint
* is incremented whenever the sensor embedded data for a captured
* frame has been written to memory. The embedded data syncpoint
* is optional and need not be specified if embedded data is not
* being captured (see @ref vi_channel_config::embdata_enable).
* The same embedded data syncpoint will keep incrementing for every
* consecutive capture request.
*
* @ref syncpoint_info::threshold must be set to the initial
* value of the hardware syncpoint on channel setup.
**/
struct syncpoint_info embdata_sp;
/**
* VI line timer syncpoint info. The line timer syncpoint is
* incremented whenever the frame readout reaches a specified
* line (see @ref vi_channel_config::line_timer,
* @ref vi_channel_config::line_timer_first, and
* @ref vi_channel_config::line_timer_periodic). The line timer
* syncpoint is optional and need not be specified if line timer
* is not enabled (see @ref vi_channel_config::line_timer_enable).
* The same line timer syncpoint will keep incrementing for every
* consecutive capture request.
*
* @ref syncpoint_info::threshold must be set to the initial
* value of the hardware syncpoint on channel setup.
**/
struct syncpoint_info linetimer_sp;
/**
* Error mask for suppressing uncorrected safety errors (see @ref
* CaptureChannelErrMask "VI error numbers"). If the mask is set to
* zero, all VI errors will be reported as uncorrected safety errors.
* If a specific error is masked by setting the corresponding bit
* (1 << <em>error number</em>) in the error mask, the error will not
* be reported as uncorrected. Note that the error may still be
* reported as a corrected error unless it is also masked in
* @ref error_mask_correctable.
*
* An uncorrected error will be interpreted by System Error Handler
* as an indication that a camera is off-line and cannot continue
* the capture.
*
* @ref CAPTURE_CHANNEL_FLAG_ENABLE_HSM_ERROR_MASKS must be set in
* @ref channel_flags for this setting to take effect. Otherwise,
* a default error mask will be used.
*/
uint32_t error_mask_uncorrectable;
/**
* This error mask applies only to errors that are masked in @ref
* error_mask_uncorrectable. By default, all such errors are reported
* to System Error Handler as corrected. If a specific error is masked
* in both this mask and in @ref error_mask_uncorrectable, by setting
* the corresponding bit (1 << <em>error number</em>) in the error mask
* (see @ref CaptureChannelErrMask "VI error numbers"), the error
* will not be reported to System Error Handler at all.
*
* A corrected safety error will be interpreted by System Error Handler
* as an indication that a single frame has been corrupted or dropped.
*
* @ref CAPTURE_CHANNEL_FLAG_ENABLE_HSM_ERROR_MASKS must be set in
* @ref channel_flags for this setting to take effect. Otherwise,
* a default error mask will be used.
*/
uint32_t error_mask_correctable;
/**
* When a capture error is detected, the capture channel will
* enter an error state if the corresponding error bit
* (1 << <em>error number</em>) is set in this bit mask
* (see @ref ViNotifyErrorTag "VI errors" for the bit definitions).
*
* When the channel is in error state it will not accept any new
* capture requests.
*/
uint64_t stop_on_error_notify_bits;
} CAPTURE_IVC_ALIGN;
/** Length of Ethernet MAC address */
#define COE_ETH_ALEN 6U
/**
* @brief Describes RTCPU CoE resources for a capture pipe-line.
*/
struct capture_coe_channel_config {
/**
* Numerical instance ID of an ethernet controller for the channel
*/
uint16_t mgbe_instance_id;
/**
* Virtual DMA channel number for this capture channel
*/
uint16_t dma_chan;
/**
* Physical DMA which services the CoE channel
*/
uint16_t pdma_chan_id;
/**
* Hardware IRQ ID which will be asserted for events on that DMA channel
*/
uint16_t mgbe_irq_num;
/**
* Maximum number of capture requests in the requests queue [1, 16].
*/
uint16_t rx_queue_depth;
/**
* Ethernet address of a camera module which will us the channel
*/
uint8_t mac_addr[COE_ETH_ALEN];
/**
* IOVA for RX descriptors for MGBE access
*/
iova_t rx_desc_ring_iova_mgbe;
/**
* IOVA for RX descriptors for RCE access
*/
iova_t rx_desc_ring_iova_rce;
/**
* IOVA for RX descriptors shadown ring for RCE access
*/
iova_t rx_desc_shdw_iova_rce;
/**
* Size of Rx descr ring buffer memory area
*/
uint64_t rx_desc_ring_mem_size;
/**
* IOVA for RX packet headers memory area for MGBE access
*/
iova_t rx_pkthdr_iova_mgbe;
/**
* Size of Rx packet headers memory area
*/
uint64_t rx_pkthdr_mem_size;
/**
* IOVA for RX Packet Info descriptors memory area for MGBE access
*/
iova_t rx_pktinfo_iova_mgbe;
/**
* IOVA for RX Packet Info descriptors memory area for RCE access
*/
iova_t rx_pktinfo_iova_rce;
/**
* Size of RX Packet Info descriptors memory area
*/
uint64_t rx_pktinfo_mem_size;
/**
* IOVA for RX scratch buffer memory area for MGBE access
*/
iova_t dummy_buf_dma;
/**
* Size of RX scratch buffer memory area
*/
uint64_t dummy_buf_dma_size;
/**
* VLAN enable value. 1 - VLAN enabled, 0 - VLAN disabled
*/
uint8_t vlan_enable;
/**
* Padding to make the structure size a multiple of 8 bytes
*/
uint8_t _padding[7];
} CAPTURE_IVC_ALIGN;
/**
* @defgroup ViDpcmModes VI DPCM Modes (non-safety)
*/
/**@{*/
/** T186-style RAW10 format */
#define VI_DPCM_RAW10 MK_U8(0)
/** T186-style RAW12 format */
#define VI_DPCM_RAW12 MK_U8(1)
/** Run-length-encoded RAW10 format */
#define VI_DPCM_RLE_RAW10 MK_U8(2)
/** Run-length-encoded RAW12 format */
#define VI_DPCM_RLE_RAW12 MK_U8(3)
/** RAW16 format for logarithmic data */
#define VI_DPCM_RAW16 MK_U8(4)
/** RAW20 format */
#define VI_DPCM_RAW20 MK_U8(5)
/**@}*/
/**
* @defgroup ViPixFmt VI Output Pixel Formats
*/
/**@{*/
/** NvColorFormat_R5G6B5 */
#define VI_PIXFMT_FORMAT_T_R5G6B5 MK_U8(1)
/** NvColorFormat_B5G6R5 */
#define VI_PIXFMT_FORMAT_T_B5G6R5 MK_U8(2)
/** NvColorFormat_R8 */
#define VI_PIXFMT_FORMAT_T_R8 MK_U8(5)
/** NvColorFormat_A8B8G8R8 */
#define VI_PIXFMT_FORMAT_T_A8B8G8R8 MK_U8(8)
/** NvColorFormat_A8R8G8B8 */
#define VI_PIXFMT_FORMAT_T_A8R8G8B8 MK_U8(9)
/** NvColorFormat_B8G8R8A8 */
#define VI_PIXFMT_FORMAT_T_B8G8R8A8 MK_U8(10)
/** NvColorFormat_R8G8B8A8 */
#define VI_PIXFMT_FORMAT_T_R8G8B8A8 MK_U8(11)
/** NvColorFormat_Y8_U8__Y8_V8 or NvColorFormat_YUYV */
#define VI_PIXFMT_FORMAT_T_Y8_U8__Y8_V8 MK_U8(16)
/** NvColorFormat_Y8_V8__Y8_U8 or NvColorFormat_YVYU */
#define VI_PIXFMT_FORMAT_T_Y8_V8__Y8_U8 MK_U8(17)
/** NvColorFormat_V8_Y8__U8_Y8 or NvColorFormat_VYUY */
#define VI_PIXFMT_FORMAT_T_V8_Y8__U8_Y8 MK_U8(18)
/** NvColorFormat_U8_Y8__V8_Y8 or NvColorFormat_UYVY */
#define VI_PIXFMT_FORMAT_T_U8_Y8__V8_Y8 MK_U8(19)
/** NV21 format (YUV420 semi-planar: Y8,U8V8) */
#define VI_PIXFMT_FORMAT_T_Y8__U8V8_N420 MK_U8(34)
/** NV12 format (YUV420 semi-planar: Y8,V8U8) */
#define VI_PIXFMT_FORMAT_T_Y8__V8U8_N420 MK_U8(35)
/** NvColorFormat_B5G5R5A1 */
#define VI_PIXFMT_FORMAT_T_B5G5R5A1 MK_U8(42)
/** NvColorFormat_R5G5B5A1 */
#define VI_PIXFMT_FORMAT_T_R5G5B5A1 MK_U8(43)
/** NV61 format (YUV422 semi-planar: Y8,U8V8) */
#define VI_PIXFMT_FORMAT_T_Y8__U8V8_N422 MK_U8(44)
/** NV16 format (YUV422 semi-planar: Y8,V8U8) */
#define VI_PIXFMT_FORMAT_T_Y8__V8U8_N422 MK_U8(45)
/** YV16 format (YUV422 full planar: Y8,U8,V8) */
#define VI_PIXFMT_FORMAT_T_Y8__U8__V8_N422 MK_U8(46)
/** YV12 format (YUV420 full planar: Y8,U8,V8) */
#define VI_PIXFMT_FORMAT_T_Y8__U8__V8_N420 MK_U8(47)
/** RLE compressed format for RAW10 data */
#define VI_PIXFMT_FORMAT_T_DPCM_RAW10 MK_U8(64)
/** NvColorFormat_A2B10G10R10 */
#define VI_PIXFMT_FORMAT_T_A2B10G10R10 MK_U8(68)
/** NvColorFormat_A2R10G10B10 */
#define VI_PIXFMT_FORMAT_T_A2R10G10B10 MK_U8(69)
/** NvColorFormat_B10G10R10A2 */
#define VI_PIXFMT_FORMAT_T_B10G10R10A2 MK_U8(70)
/** NvColorFormat_R10G10B10A2 */
#define VI_PIXFMT_FORMAT_T_R10G10B10A2 MK_U8(71)
/** NvColorFormat_A4B4G4R4 */
#define VI_PIXFMT_FORMAT_T_A4B4G4R4 MK_U8(80)
/** NvColorFormat_A4R4G4B4 */
#define VI_PIXFMT_FORMAT_T_A4R4G4B4 MK_U8(81)
/** NvColorFormat_B4G4R4A4 */
#define VI_PIXFMT_FORMAT_T_B4G4R4A4 MK_U8(82)
/** NvColorFormat_R4G4B4A4 */
#define VI_PIXFMT_FORMAT_T_R4G4B4A4 MK_U8(83)
/** NvColorFormat_A1B5G5R5 */
#define VI_PIXFMT_FORMAT_T_A1B5G5R5 MK_U8(84)
/** NvColorFormat_A1R5G5B5 */
#define VI_PIXFMT_FORMAT_T_A1R5G5B5 MK_U8(85)
/** NV12 format (YUV420 semi-planar: Y10,V10U10) */
#define VI_PIXFMT_FORMAT_T_Y10__V10U10_N420 MK_U8(98)
/** NV21 format (YUV420 semi-planar: Y10,U10V10) */
#define VI_PIXFMT_FORMAT_T_Y10__U10V10_N420 MK_U8(99)
/** YV12 format (YUV420 full planar: Y10,U10,V10) */
#define VI_PIXFMT_FORMAT_T_Y10__U10__V10_N420 MK_U8(100)
/** NV16 format (YUV422 semi-planar: Y10,V10U10) */
#define VI_PIXFMT_FORMAT_T_Y10__V10U10_N422 MK_U8(101)
/** NV61 format (YUV422 semi-planar: Y10,U10V10) */
#define VI_PIXFMT_FORMAT_T_Y10__U10V10_N422 MK_U8(102)
/** YV16 format (YUV422 full planar: Y10,U10,V10) */
#define VI_PIXFMT_FORMAT_T_Y10__U10__V10_N422 MK_U8(103)
/** RLE compressed format for RAW12 data */
#define VI_PIXFMT_FORMAT_T_DPCM_RAW12 K_U32(128)
/** RAW ISP encoded float, 20-bit fixed */
#define VI_PIXFMT_FORMAT_T_R16_X_ISP20 MK_U8(194)
/** Alias for @ref VI_PIXFMT_FORMAT_T_R16_X_ISP20 */
#define VI_PIXFMT_FORMAT_T_R16_ISP VI_PIXFMT_FORMAT_T_R16_X_ISP20
/** NvColorFormat_Float_R16 */
#define VI_PIXFMT_FORMAT_T_R16_F MK_U8(195)
/** NvColorFormat_R16 */
#define VI_PIXFMT_FORMAT_T_R16 MK_U8(196)
/** NvColorFormat_Int_R16 */
#define VI_PIXFMT_FORMAT_T_R16_I MK_U8(197)
/** NvColorFormat_R16_X_ISP24 (RAW ISP encoded float, 24-bit fixed) */
#define VI_PIXFMT_FORMAT_T_R16_X_ISP24 MK_U8(198)
/** NvColorFormat_R24 */
#define VI_PIXFMT_FORMAT_T_R24 MK_U8(210)
/** NvColorFormat_R32 */
#define VI_PIXFMT_FORMAT_T_R32 MK_U8(230)
/** NvColorFormat_Float_R32 */
#define VI_PIXFMT_FORMAT_T_R32_F MK_U8(232)
/** RLE compressed format for RAW16 data */
#define VI_PIXFMT_FORMAT_T_DPCM_RAW16 MK_U8(254)
/** RLE compressed format for RAW20 data */
#define VI_PIXFMT_FORMAT_T_DPCM_RAW20 MK_U8(255)
/**@}*/
/**
* @brief VI Channel configuration
*
* Parameters for VI unit register programming to capture a frame.
*/
struct vi_channel_config {
/** Enable CSI datatype override (1=enable, 0=disable). */
unsigned dt_enable:1;
/** Enable reception of sensor embedded data (1=enable, 0=disable). */
unsigned embdata_enable:1;
/** Enable memory flush function (1=enable, 0=disable). */
unsigned flush_enable:1;
/** Enable periodic (subframe) memory flushes (1=enable, 0=disable). */
unsigned flush_periodic:1;
/** Enable line timer function (1=enable, 0=disable). */
unsigned line_timer_enable:1;
/** Periodic line timer notice enabled flag (1=enable, 0=disable). */
unsigned line_timer_periodic:1;
/** Enable PIXFMT writing pixels flag (1=enable, 0=disable). */
unsigned pixfmt_enable:1;
/**
* Enable merging of adjacent RAW8, RAW10, or RAW12 pixel values
* into a single wide pixel (1=enable, 0=disable).
*/
unsigned pixfmt_wide_enable:1;
/** Set wide pixel endianness (0 = big endian, 1 = little endian). */
unsigned pixfmt_wide_endian:1;
/**
* Enable Phase Detection Auto Focus (PDAF) pixel replacement
* (1=enable, 0=disable). (non-safety)
*/
unsigned pixfmt_pdaf_replace_enable:1;
/** ISPA buffer enabled (1=enable, 0=disable). (deprecated, non-safety) */
unsigned ispbufa_enable:1;
/** ISPB buffer enabled (1=enable, 0=disable). (deprecated, non-safety) */
unsigned ispbufb_enable:1;
/** Enable pixel companding (1=enable, 0=disable). (non-safety) */
unsigned compand_enable:1;
/** Reserved bits */
unsigned pad_flags__:19;
struct match_rec {
/**
* @ref NvCsiDataType "CSI datatype" value to match.
*/
uint8_t datatype;
/**
* Bitmask for bits of @ref datatype to compare [0, UINT8_MAX].
* Normally set to UINT8_MAX to not restrict the comparison.
*/
uint8_t datatype_mask;
/**
* 1-hot encoded @ref NvCsiStream "NVCSI stream" to match
* (1 << @ref NvCsiStream "stream").
*/
uint8_t stream;
/**
* Bitmask for bits of @ref stream to compare [0, 0x3F].
* Normally set to 0x3F to not restrict the comparison.
*/
uint8_t stream_mask;
/**
* 1-hot encoded @ref NvCsiVirtualChannel "CSI Virtual Channel"
* to match (1 << @ref NvCsiVirtualChannel "VC").
*/
uint16_t vc;
/**
* Bitmask for bits of @ref vc to compare [0, UINT16_MAX].
* Normally set to UINT16_MAX to not restrict the comparison.
*/
uint16_t vc_mask;
/** CSI frame number to match. */
uint16_t frameid;
/**
* Bitmask for bits of @ref frameid to compare [0, UINT16_MAX].
* Normally set to 0 to disable frame matching.
*/
uint16_t frameid_mask;
/**
* For Sony sensors with Digital Overlap mode:
* data in the DOL header to match [0, UINT16_MAX].
*/
uint16_t dol;
/**
* Bitmask for bits of @ref dol to compare [0, UINT16_MAX].
* Normally set to 0 to disable DOL matching.
*/
uint16_t dol_mask;
} match;
/**<
* VI channel match parameters. Used to select incoming frames
* for this VI channel.
*/
/**
* For Sony sensors with Digital Overlap mode: DOL header select [0, 3].
* Configures which pixel in the first pixel packet will carry the
* DOL header used for channel matching (see @ref match::dol).
*/
uint8_t dol_header_sel;
/**
* @ref NvCsiDataType "Datatype" override value. If @ref dt_enable is
* set this value overrides the incoming pixel datatype from the sensor.
* This setting can be used to capture user defined datatypes, for
* example.
*/
uint8_t dt_override;
/** @ref ViDpcmModes "VI DPCM Mode". (non-safety) */
uint8_t dpcm_mode;
/** Reserved */
uint8_t pad_dol_dt_dpcm__;
struct vi_frame_config {
/**
* Frame width (pixels) before cropping [0, UINT16_MAX].
* 0 is interpreted as 65536.
*/
uint16_t frame_x;
/**
* Frame height (lines) before cropping [0, UINT16_MAX].
* 0 is interpreted as 65536.
*/
uint16_t frame_y;
/** Number of embedded data bytes on a line [0, 131071]. */
uint32_t embed_x;
/** Number of embedded data lines in a frame [0, 65535]. */
uint32_t embed_y;
struct skip_rec {
/**
* Left edge of the crop region, counted in groups
* of 8 pixels [0, MIN(@ref frame_x - 1,
* @ref crop_rec::x - 1) / 8]. Left crop is disabled
* if the value is 0.
*/
uint16_t x;
/**
* Top edge of crop region counted in lines
* [0, MIN(@ref frame_y - 1, @ref crop_rec::y - 1)].
* Top crop is disabled if the value is 0.
*/
uint16_t y;
} skip; /**< Top left corner of crop region */
struct crop_rec {
/**
* Right edge of crop region counted in pixels
* [0, UINT16_MAX]. 0 is interpreted as 65536. Right
* crop is disabled if the crop region reaches beyond
* the right edge of the frame (>= @ref frame_x).
*/
uint16_t x;
/**
* Bottom edge of crop region counted in lines
* [0, UINT16_MAX]. Bottom crop is disabled if the crop
* region reaches beyond the bottom edge of the frame
* (>= @ref frame_y).
*/
uint16_t y;
} crop; /**< Bottom right corner of crop region */
} frame;
/**<
* Frame configuration (frame resolution, crop region,
* number of embedded data lines)
*/
/**
* Flush to memory after @em flush pixel lines [0, UINT16_MAX].
* 0 is interpreted as 65536. @ref flush_enable must be set for this
* setting to take effect. @ref flush_periodic must be set in order to
* repeat the memory flush every @em flush lines.
*/
uint16_t flush;
/**
* Number of pixel lines before first memory flush [0, UINT16_MAX].
* Can be used to trigger the first memory flush on a line different
* from @ref flush. 0 disables this setting.
*/
uint16_t flush_first;
/**
* Pixel line count between memory line timer events [0, UINT16_MAX].
* 0 is interpreted as 65536. @ref flush_enable must be set
* for this setting to take effect.
*/
uint16_t line_timer;
/** Line count at which to trip the first line timer event */
uint16_t line_timer_first;
struct pixfmt_rec {
/** @ref ViPixFmt "VI Output Pixel Format". */
uint16_t format;
/**
* Zero padding control for RAW8/10/12/14->T_R16 and
* RAW20/24->T_R32. 0 = disable, 1 = right alined MSB padded,
* 2 = left aligned LSB padded.
*/
uint8_t pad0_en;
/** Reserved */
uint8_t pad__;
struct pdaf_rec {
/**
* Within a line, X pixel position at which PDAF
* separation begins [0, UINT16_MAX].
*/
uint16_t crop_left;
/**
* Within a line, X pixel position at which PDAF
* separation ends [0, UINT16_MAX].
*/
uint16_t crop_right;
/**
* Line at which PDAF separation begins
* [0, UINT16_MAX].
*/
uint16_t crop_top;
/**
* line at which PDAF separation ends
* [0, UINT16_MAX].
*/
uint16_t crop_bottom;
/**
* Within a line, X pixel position at which PDAF
* replacement begins [0, UINT16_MAX].
*/
uint16_t replace_crop_left;
/**
* Within a line, X pixel position at which PDAF
* replacement ends [0, UINT16_MAX].
*/
uint16_t replace_crop_right;
/**
* Line at which PDAF replacement begins
* [0, UINT16_MAX].
*/
uint16_t replace_crop_top;
/**
* Line at which PDAF repalcement ends
* [0, UINT16_MAX].
*/
uint16_t replace_crop_bottom;
/**
* X coordinate of last PDAF pixel within the PDAF
* crop window [0, UINT16_MAX]. */
uint16_t last_pixel_x;
/**
* Y coordinate of last PDAF pixel within the PDAF
* crop window [0, UINT16_MAX].
*/
uint16_t last_pixel_y;
/** Value to replace PDAF pixel with */
uint16_t replace_value;
/**
* Memory format for writing PDAF pixels. Only
* T_R16_X_ISP20, T_R16_F, T_R16, T_R32, and T_R32_F
* formats are supported (see @ref ViPixFmt
* "VI Output Pixel Formats" for values).
*/
uint8_t format;
/** Reserved */
uint8_t pad_pdaf__;
} pdaf;
/**<
* Configuration for Phase Detection Auto-Focus pixels.
* (non-safety)
*/
} pixfmt; /**< Pixel format configuration */
struct dpcm_rec {
/**
* @deprecated
* Not required from T194 onwards.
*/
uint16_t strip_width;
/**
* Number of pixel packets in overfetch region [0, UINT16_MAX].
* 0 disables overfetch.
*/
uint16_t strip_overfetch;
/**
* Number of pixel packets in first generated chunk
* (no OVERFETCH region) [0, UINT16_MAX].
*/
uint16_t chunk_first;
/**
* Number of pixel packets in “body” chunks (including
* possible overfetch) [0, UINT16_MAX].
*/
uint16_t chunk_body;
/** Number of “body” chunks to emit [0, UINT16_MAX]. */
uint16_t chunk_body_count;
/**
* Number of pixel packets in chunk immediately after “body”
* chunks (including possible overfecth) [0, UINT16_MAX].,
*/
uint16_t chunk_penultimate;
/**
* Number of pixel packets in the final generated chunk
* (including possible overfetch) [0, UINT16_MAX].
*/
uint16_t chunk_last;
/** Reserved */
uint16_t pad__;
/** Maximum value to truncate input data to [0, 0xFFFFF]. */
uint32_t clamp_high;
/** Minimum value to truncate input data to [0, 0xFFFFF]. */
uint32_t clamp_low;
} dpcm; /**< Configuration for DPCM compression. (non-safety) */
struct atomp_rec {
struct surface_rec {
/**
* Undefined in RCE-FW interface.
*
* In the UMD-KMD shared memory interface this carries
* an offset into the memory buffer identified by
* a memory handle stored in @ref offset_hi. Must be
* a multiple of 64.
*/
uint32_t offset;
/**
* Undefined in RCE-FW interface.
*
* In the UMD-KMD interface this carries a memory
* handle for the output buffer. See KMD documentation
* for the constraints.
*/
uint32_t offset_hi;
} surface[VI_NUM_ATOMP_SURFACES];
/**<
* Memory buffers for output surfaces. Currently only defined
* for the shared memory interface between UMD and KMD. The
* content is undefined for the RCE-FW interface.
*/
/**
* Line stride of the surface in bytes [0, 0xFFFFF].
* Must be a multiple of 64.
*/
uint32_t surface_stride[VI_NUM_ATOMP_SURFACES];
/**
* DPCM chunk stride (distance from start of chunk to end of
* chunk) [0, 0xFFFFF].
*/
uint32_t dpcm_chunk_stride;
} atomp;
/**< Memory output configuration. */
/** Reserved */
uint16_t pad__[2];
} CAPTURE_IVC_ALIGN;
/**
* @defgroup CapViEngineStatus VI engine status bits
* @{
*/
/**
* Start of frame capture timed out. The timeout is measured
* from VI falcon task activation to frame start (see
* @ref capture_descriptor::frame_start_timeout).
*/
#define CAPTURE_VI_ENGINE_STATUS_FRAME_START_TIMEOUT MK_BIT32(0)
/**
* Frame capture timed out. The timeout is measured from frame start
* to frame completion (see @ref capture_descriptor::frame_timeout).
*/
#define CAPTURE_VI_ENGINE_STATUS_FRAME_COMPLETION_TIMEOUT MK_BIT32(1)
/** Missing line-end packet in pixel data line */
#define CAPTURE_VI_ENGINE_STATUS_PIXEL_MISSING_LE MK_BIT32(5)
/** Frame has too many lines */
#define CAPTURE_VI_ENGINE_STATUS_PIXEL_RUNAWAY MK_BIT32(6)
/** Pixel data received without line-start packet */
#define CAPTURE_VI_ENGINE_STATUS_PIXEL_SPURIOUS MK_BIT32(7)
/** Pixel line is too long */
#define CAPTURE_VI_ENGINE_STATUS_PIXEL_LONG_LINE MK_BIT32(8)
/** Pixel line is too short */
#define CAPTURE_VI_ENGINE_STATUS_PIXEL_SHORT_LINE MK_BIT32(9)
/** Missing line-end packet in embedded data line */
#define CAPTURE_VI_ENGINE_STATUS_EMBED_MISSING_LE MK_BIT32(10)
/** Frame has too many lines of embedded data */
#define CAPTURE_VI_ENGINE_STATUS_EMBED_RUNAWAY MK_BIT32(11)
/** Embedded data received without line-start packet */
#define CAPTURE_VI_ENGINE_STATUS_EMBED_SPURIOUS MK_BIT32(12)
/** Embedded data line is too long */
#define CAPTURE_VI_ENGINE_STATUS_EMBED_LONG_LINE MK_BIT32(13)
/**
* Embedded data received when not expected. Sensor has been
* programmed to send embedded data but the capture has
* not been programmed to expect it.
*/
#define CAPTURE_VI_ENGINE_STATUS_EMBED_INFRINGE MK_BIT32(14)
/** Invalid pixel datatype in pixel packet or line-start packet */
#define CAPTURE_VI_ENGINE_STATUS_DTYPE_MISMATCH MK_BIT32(15)
/** Reserved */
#define CAPTURE_VI_ENGINE_STATUS_FORCE_FE MK_BIT32(16)
/** Short frame: frame has too few pixel lines */
#define CAPTURE_VI_ENGINE_STATUS_PIXEL_INCOMPLETE MK_BIT32(17)
/** Short frame: frame has too few embedded data lines */
#define CAPTURE_VI_ENGINE_STATUS_EMBED_INCOMPLETE MK_BIT32(18)
/**
* VI hardware failure detected by VI PFSD
* (see @ref CAPTURE_CHANNEL_FLAG_ENABLE_VI_PFSD).
*/
#define CAPTURE_VI_ENGINE_STATUS_PFSD_FAULT MK_BIT32(19)
/**@}*/
/** @brief Engine status record written by VI */
struct capture_vi_engine_status {
/**
* TSC based timestamp in nanoseconds, representing the time at which
* the engine status was written.
*/
uint64_t timestamp;
/** @ref CapViEngineStatus "VI engine status bits". */
uint32_t status_engine;
/** Number of subframes processed. */
uint16_t subframe;
/**
* Task status (0 = success, 1 = failure).
*/
uint16_t status_task;
};
/**
* @brief Memory buffer for engine status.
*
* This structure is used to between UMD and KMD to share a buffer
* for writing VI or ISP engine status.
*/
struct engine_status_surface {
/**
* Undefined in RCE-FW interface.
*
* In the UMD-KMD interface this carries an Offset into a memory
* buffer identified by the buffer handle stored in @ref offset_hi.
* Must be a multiple of @ref NV_ENGINE_STATUS_SURFACE_SIZE.
*
* Valid only in UMD-KMD interface.
*/
uint32_t offset;
/**
* Undefined in RCE-FW interface.
*
* In the UMD-KMD inteface this carries a memory handle for the
* engine stauts buffer. Must be a valid buffer handle or 0.
*/
uint32_t offset_hi;
} CAPTURE_IVC_ALIGN;
/**
* @brief Watermark offset for specifying address within watermark ring buffer.
*/
struct watermark_mem_offset {
/** Index within watermark buffer */
uint32_t buff_idx;
/** Size of watermark */
uint32_t size;
} CAPTURE_IVC_ALIGN;
/**
* @brief NVCSI error status
*
* Detailed error information reported by the CSI interface.
*
* This information is provided for logging and triage of any capture
* issues. The information is queried from the CSI interface whenever
* a capture request completes. However, it should be noted that the
* information is not frame accurate or even channel accurate in some
* cases.
*
* Any error reported here must not be construed to mean
* that the captured frame is good or bad. Please refer to
* @ref capture_status::status for making that judgement.
*
*/
struct nvcsi_error_status {
/**
* NVCSI @ref NvCsiStreamErrors "stream errors" map to a CSI port
* and affect all capture channels sharing that port via the use
* of CSI virtual channels.
*
* The errors will only be reported only once, on the capture channel
* which happened to retrieve the error report first, not on all
* capture channels sharing the CSI port.
*
* Note that these errors will cause VI to independently detect
* errors on all affected channels and the error reporting done
* by VI is frame accurate, unlike CSI, so the client need not
* consider these errors for normal operation.
*/
uint32_t nvcsi_stream_bits;
/**
* @defgroup NvCsiStreamErrors NVCSI Stream error bits
*/
/** @{ */
/**
* Both CRC values in a CPHY CSI packet header have a mismatch.
* The packet header is corrupted.
*/
#define NVCSI_STREAM_ERR_STAT_PH_BOTH_CRC_ERR MK_BIT32(1)
/**
* Multiple bit errors detected by in DPHY CSI packet header by ECC.
* The packet header is corrupted.
*/
#define NVCSI_STREAM_ERR_STAT_PH_ECC_MULTI_BIT_ERR MK_BIT32(0)
/** @} */
/**
* NVCSI @ref NvcsiVirtualChannelErrors "virtual channel errors" map
* to a single CSI virtual channel carried over a CSI port. These
* errors are also forwarded to VI with each frame-end packet and
* reported to the client with each affected capture request as
* part of @ref notify_bits.
*/
uint32_t nvcsi_virtual_channel_bits;
/**
* @defgroup NvCsiVirtualChannelErrors NVCSI Virtual Channel error bits
*/
/** @{ */
/**
* CSI embedded data line CRC error. The sensor embedded data
* is corrupted.
*/
#define NVCSI_VC_ERR_INTR_STAT_EMBEDDED_LINE_CRC_ERR MK_BIT32(5)
/**
* One out of two CRCs for the CPHY CSI packet header mismatches.
* The CRC value itself is corrupted. This error does not
* cause frame corruption.
*/
#define NVCSI_VC_ERR_INTR_STAT_PH_SINGLE_CRC_ERR MK_BIT32(4)
/**
* CSI payload data word count short error. The received data line
* was incomplete.
*/
#define NVCSI_VC_ERR_INTR_STAT_PD_WC_SHORT_ERR MK_BIT32(3)
/**
* A CRC mismatch was detected in CSI packet payload data.
* The payload is corrupted.
*/
#define NVCSI_VC_ERR_INTR_STAT_PD_CRC_ERR MK_BIT32(2)
/**
* A single bit error was corrected by ECC in the DPHY CSI
* packet header.
*/
#define NVCSI_VC_ERR_INTR_STAT_PH_ECC_SINGLE_BIT_ERR MK_BIT32(1)
/**
* CSI pixel parser finite state machine timeout.
* A line of data was not received in time
* (see @ref CAPTURE_CSI_STREAM_SET_PARAM_REQ_MSG::watchdog_config).
*/
#define NVCSI_VC_ERR_INTR_STAT_PPFSM_TIMEOUT MK_BIT32(0)
/** @} */
/**
* NVCSI @ref NvCsiCilErrors "common interface logic errors"
* reported by partition A of the CSI brick (CIL A).
*/
uint32_t cil_a_error_bits;
/**
* NVCSI @ref NvCsiCilErrors "common interface logic errors"
* reported by partition B of the CSI brick (CIL B).
*/
uint32_t cil_b_error_bits;
/** @} */
/**
* @defgroup NvCsiCilErrors NVCSI CIL error bits
*/
/** @{ */
/** Escape mode LP sequence error on lane 1. */
#define NVCSI_ERR_CIL_DATA_LANE_ESC_MODE_SYNC_ERR1 MK_BIT32(14)
/** Escape mode LP sequence error on lane 0. */
#define NVCSI_ERR_CIL_DATA_LANE_ESC_MODE_SYNC_ERR0 MK_BIT32(13)
/**
* Lane alignment error. Some lanes detected a sync word while
* other lanes did not.
*/
#define NVCSI_ERR_DPHY_CIL_LANE_ALIGN_ERR MK_BIT32(12)
/**
* DPHY skew calibration did not complete while sweeping the
* clock lane trimmer. This will happen if the calibration
* sequence is not long enough.
*/
#define NVCSI_ERR_DPHY_CIL_DESKEW_CALIB_ERR_CTRL MK_BIT32(11)
/**
* DPHY skew calibration did not complete while sweeping the
* data lane 1 trimmer. This will happen if the calibration
* sequence is not long enough.
*/
#define NVCSI_ERR_DPHY_CIL_DESKEW_CALIB_ERR_LANE1 MK_BIT32(10)
/**
* DPHY skew calibration did not complete while sweeping the
* data lane 0 trimmer. This will happen if the calibration
* sequence is not long enough.
*/
#define NVCSI_ERR_DPHY_CIL_DESKEW_CALIB_ERR_LANE0 MK_BIT32(9)
/** Data lane 1 receive FIFO overflow. */
#define NVCSI_ERR_CIL_DATA_LANE_RXFIFO_FULL_ERR1 MK_BIT32(8)
/** LP sequence error detected on DATA lane 1. */
#define NVCSI_ERR_CIL_DATA_LANE_CTRL_ERR1 MK_BIT32(7)
/** Multiple bit errors detected in the data lane 1 sync word. */
#define NVCSI_ERR_CIL_DATA_LANE_SOT_MB_ERR1 MK_BIT32(6)
/** Single bit error detected in the lane 1 sync word. */
#define NVCSI_ERR_CIL_DATA_LANE_SOT_SB_ERR1 MK_BIT32(5)
/** Data lane 0 receive FIFO overflow. */
#define NVCSI_ERR_CIL_DATA_LANE_RXFIFO_FULL_ERR0 MK_BIT32(4)
/** LP sequence error detected on DATA lane 0. */
#define NVCSI_ERR_CIL_DATA_LANE_CTRL_ERR0 MK_BIT32(3)
/** Multiple bit errors detected in the data lane 0 sync word */
#define NVCSI_ERR_CIL_DATA_LANE_SOT_MB_ERR0 MK_BIT32(2)
/** Single bit error detected in the lane 0 sync word. */
#define NVCSI_ERR_CIL_DATA_LANE_SOT_SB_ERR0 MK_BIT32(1)
/** DPHY clock lane control error */
#define NVCSI_ERR_DPHY_CIL_CLK_LANE_CTRL_ERR MK_BIT32(0)
/** @} */
};
/**
* @brief Frame capture status record
*
* The capture status is part of @ref capture_descriptor and is populated
* by RCE-FW when the capture request is completed. The status record
* is guaranteed to be up-to-date before RCE-FW sends the @ref
* CAPTURE_STATUS_IND message to the client in order to signal request
* completion.
*/
struct capture_status {
/** @ref NvCsiStream "CSI Stream Number". */
uint8_t src_stream;
/** @ref NvCsiVirtualChannel "CSI virtual channel number". */
uint8_t virtual_channel;
/** Frame number from sensor. Value range depends on the sensor. */
uint16_t frame_id;
/** @ref CaptureStatusCodes "Capture status code". */
uint32_t status;
/**
* @defgroup CaptureStatusCodes Capture status codes
*/
/** @{ */
/**
* Capture status unknown. This usually means that the capture request
* is not yet executed or is still in progress. The values of other
* fields in the capture status record are undefined.
*/
#define CAPTURE_STATUS_UNKNOWN MK_U32(0)
/**
* Capture status success.
*
* Value of @ref notify_bits may be checked for any
* non frame-corrupting errors detected during capture.
*/
#define CAPTURE_STATUS_SUCCESS MK_U32(1)
/**
* CSIMUX frame error. Maps to VI CSIMUX_FRAME notify event.
*
* This signals an error detected by VI at frame boundary or
* a CSI error received with FE packet from NVCSI.
*
* Refer to @ref notify_bits for error details.
*/
#define CAPTURE_STATUS_CSIMUX_FRAME MK_U32(2)
/**
* CSIMUX stream error. Maps to VI CSIMUX_STREAM notify event.
*
* An error was detected in the VI CSIMUX stream interface.
*
*
* Refer to @ref notify_bits for error details.
*/
#define CAPTURE_STATUS_CSIMUX_STREAM MK_U32(3)
/**
* @deprecated
* Not supported from T194 onwards.
* CHANSEL_FAULT errors are reported with @ref
* CAPTURE_STATUS_FALCON_ERROR.
*/
#define CAPTURE_STATUS_CHANSEL_FAULT MK_U32(4)
/**
* @deprecated
* Not supported from T194 onwards.
*
* CHANSEL_FAULT_FE errors are reported with @ref
* CAPTURE_STATUS_FALCON_ERROR.
*/
#define CAPTURE_STATUS_CHANSEL_FAULT_FE MK_U32(5)
/**
* Channel collision error. Maps to VI CHANSEL_COLLISION
* notify event.
*
* A received start-of-frame packet matches a VI channel that
* is already receiving a frame. This is typically caused by
* a mistake in programming the
* (@ref capture_descriptor::match "channel match rules")
* so that they match more than one sensor stream.
*
* This error sets @ref CAPTURE_STATUS_NOTIFY_BIT_CHANSEL_COLLISION
* in @ref notify_bits.
*/
#define CAPTURE_STATUS_CHANSEL_COLLISION MK_U32(6)
/**
* @deprecated.
* Not supported from T194 onwards.
*
* CHANSEL_SHORT_FRAME errors are reported with @ref
* CAPTURE_STATUS_FALCON_ERROR.
*/
#define CAPTURE_STATUS_CHANSEL_SHORT_FRAME MK_U32(7)
/**
* Single ATOMP surface packer has overflowed. Maps to VI
* ATOMP_PACKER_OVERFLOW notify event. This is an internal
* error that should not happen in normal use.
*
* This error sets @ref CAPTURE_STATUS_NOTIFY_BIT_ATOMP_PACKER_OVERFLOW
* in @ref notify_bits.
*/
#define CAPTURE_STATUS_ATOMP_PACKER_OVERFLOW MK_U32(8)
/**
* Frame truncated writing to system memory. Maps to VI
* ATOMP_FRAME_TRUNCATED event. This error typically indicates
* memory back-pressure due to insufficient memory bandwidth
* or an excessive memory access latency.
*
* This error sets @ref CAPTURE_STATUS_NOTIFY_BIT_ATOMP_FRAME_TRUNCATED
* in @ref notify_bits.
*/
#define CAPTURE_STATUS_ATOMP_FRAME_TRUNCATED MK_U32(9)
/**
* Frame discarded writing to system memory. Maps to VI
* ATOMP_FRAME_TOSSED event. This error typically indicates
* memory back-pressure due to insufficient memory bandwidth
* or an excessive memory access latency.
*
* This error sets @ref CAPTURE_STATUS_NOTIFY_BIT_ATOMP_FRAME_TOSSED
* in @ref notify_bits.
*/
#define CAPTURE_STATUS_ATOMP_FRAME_TOSSED MK_U32(10)
/**
* @deprecated
* Not supported from T194 onwards.
*/
#define CAPTURE_STATUS_ISPBUF_FIFO_OVERFLOW MK_U32(11)
/**
* Capture status out of sync. A stale error from a past frame was
* detected and logged. An unknown number of frames may have been lost
* due to, for example, a longer break in the sensor connection.
*/
#define CAPTURE_STATUS_SYNC_FAILURE MK_U32(12)
/**
* @deprecated
* Not supported from T194 onwards.
*/
#define CAPTURE_STATUS_NOTIFIER_BACKEND_DOWN MK_U32(13)
/**
* Capture error reported by VI falcon. See @ref notify_bits
* for detailed @ref ViFalconErrorBits "errors".
*/
#define CAPTURE_STATUS_FALCON_ERROR MK_U32(14)
/**
* Incoming frame does not match any active channel.
* Maps to VI CHANSEL_NOMATCH event.
*
* This typically means that the client has either not configured
* a capture channel for the sensor or has been unable to supply
* capture requests quickly enough, causing a request queue
* underflow. Each CHANSEL_NOMATCH error implies that a frame
* has been dropped.
*/
#define CAPTURE_STATUS_CHANSEL_NOMATCH MK_U32(15)
/**
* Invalid VI capture settings. Parameter validation error from
* VI driver.
*/
#define CAPTURE_STATUS_INVALID_CAP_SETTINGS MK_U32(16)
/** @} */
/** TSC based start-of-frame (SOF) timestamp (ns) */
uint64_t sof_timestamp;
/** TSC based end-of-frame (EOF) timestamp (ns) */
uint64_t eof_timestamp;
/**
* @deprecated
* Not fully supported from T194 onwards.
* See @ref notify_bits for error details.
*/
uint32_t err_data;
/**
* @defgroup CaptureStatusFlags Capture status flags
*/
/** @{ */
/** Channel encountered unrecoverable error and must be reset */
#define CAPTURE_STATUS_FLAG_CHANNEL_IN_ERROR MK_BIT32(1)
/** @} */
/** See @ref CaptureStatusFlags "Capture status flags". */
uint32_t flags;
/**
* @ref ViNotifyErrorTag "VI errors" logged in capture channel since
* previous capture.
*/
uint64_t notify_bits;
/**
* @defgroup ViNotifyErrorTag VI errors
*
* VI error bits for the @ref notify_bits field.
*/
/** @{ */
/**
* Frame start fault. A FS packet was received while already
* in frame indicating that a FE packet was lost.
*
* This is not a frame corrupting error, unless pixel data was
* lost as well, and may also be present in the capture status
* of a successful request.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_CSIMUX_FRAME_FS_FAULT MK_BIT64(2)
/** FE forced by CSIMUX stream reset or stream timeout. */
#define CAPTURE_STATUS_NOTIFY_BIT_CSIMUX_FRAME_FORCE_FE_FAULT MK_BIT64(3)
/** Frame ID of the FE packet does not match the Frame ID of the FS packet. */
#define CAPTURE_STATUS_NOTIFY_BIT_CSIMUX_FRAME_FE_FRAME_ID_FAULT MK_BIT64(4)
/** An illegal pixel enable encoding was detected in a long packet. */
#define CAPTURE_STATUS_NOTIFY_BIT_CSIMUX_FRAME_PXL_ENABLE_FAULT MK_BIT64(5)
/**
* CSI pixel parser finite state machine timeout.
* A line of data was not received in time
* (see @ref CAPTURE_CSI_STREAM_SET_PARAM_REQ_MSG::watchdog_config).
*/
#define CAPTURE_STATUS_NOTIFY_BIT_CSIMUX_FRAME_CSI_FAULT_PPFSM_TIMEOUT MK_BIT64(15)
/**
* A single bit error was corrected by ECC in the DPHY CSI
* packet header.
*
* This is not a frame corrupting error and may also be present
* in the capture status of a successful request.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_CSIMUX_FRAME_CSI_FAULT_PH_ECC_SINGLE_BIT_ERR MK_BIT64(16)
/**
* A CRC mismatch was detected in CSI packet payload data.
* The payload is corrupted.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_CSIMUX_FRAME_CSI_FAULT_PD_CRC_ERR MK_BIT64(17)
/**
* CSI payload data word count short error. The received data line
* was incomplete.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_CSIMUX_FRAME_CSI_FAULT_PD_WC_SHORT_ERR MK_BIT64(18)
/**
* One out of two CRCs for the CPHY CSI packet header mismatches.
* The CRC value itself is corrupted. This error does not cause
* frame corruption.
*
* This is not a frame corrupting error and may also be present
* in the capture status of a successful request.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_CSIMUX_FRAME_CSI_FAULT_PH_SINGLE_CRC_ERR MK_BIT64(19)
/**
* CSI embedded data line CRC error. The sensor embedded data
* is corrupted.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_CSIMUX_FRAME_CSI_FAULT_EMBEDDED_LINE_CRC_ERR MK_BIT64(20)
/**
* Spurious data detected between valid frames or before first frame.
* This can be a badly corrupted frame or some random bits. This error
* doesn't have an effect on the next captured frame. Spurious data
* before the first captured frame is often caused by receiving the
* tail part of a partial frame in the beginning. Spurious errors
* detected before first full frame will be suppressed.
*
* This is not a frame corrupting error and may also be present
* in the capture status of a subsequent successful request.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_CSIMUX_STREAM_SPURIOUS_DATA MK_BIT64(21)
/**
* Stream FIFO overflow. This error is unrecoverable. The FIFO
* overflow error usually implies incorrect configuration of
* VI and ISP core clock rates. This error should not happen
* during normal use.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_CSIMUX_STREAM_FIFO_OVERFLOW MK_BIT64(22)
/**
* Stream loss of frame error. A FS packet was lost due a stream
* FIFO overflow. This error is unrecoverable. The FIFO
* overflow error usually implies incorrect configuration of
* VI and ISP core clock rates. This error should not happen
* during normal use.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_CSIMUX_STREAM_FIFO_LOF MK_BIT64(23)
/**
* An illegal data packet was encountered and dropped by CSIMUX.
* This error may have no effect on capture result or may trigger
* other errors if the frame got corrupted.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_CSIMUX_STREAM_FIFO_BADPKT MK_BIT64(24)
/**
* Start of frame capture timed out. The timeout is measured
* from VI falcon task activation to frame start (see
* @ref capture_descriptor::frame_start_timeout).
*/
#define CAPTURE_STATUS_NOTIFY_BIT_FRAME_START_TIMEOUT MK_BIT64(25)
/**
* Frame capture timed out. The timeout is measured from frame start
* to frame completion (see @ref capture_descriptor::frame_timeout).
*/
#define CAPTURE_STATUS_NOTIFY_BIT_FRAME_COMPLETION_TIMEOUT MK_BIT64(26)
/** Missing line-end packet in pixel data line */
#define CAPTURE_STATUS_NOTIFY_BIT_CHANSEL_PIXEL_MISSING_LE MK_BIT64(30)
/** Frame has too many lines */
#define CAPTURE_STATUS_NOTIFY_BIT_CHANSEL_PIXEL_RUNAWAY MK_BIT64(31)
/** Pixel data received without line-start packet */
#define CAPTURE_STATUS_NOTIFY_BIT_CHANSEL_PIXEL_SPURIOUS MK_BIT64(32)
/** Pixel line is too long */
#define CAPTURE_STATUS_NOTIFY_BIT_CHANSEL_PIXEL_LONG_LINE MK_BIT64(33)
/** Pixel line is too short */
#define CAPTURE_STATUS_NOTIFY_BIT_CHANSEL_PIXEL_SHORT_LINE MK_BIT64(34)
/** Missing line-end packet in embedded data line */
#define CAPTURE_STATUS_NOTIFY_BIT_CHANSEL_EMBED_MISSING_LE MK_BIT64(35)
/** Frame has too many lines of embedded data */
#define CAPTURE_STATUS_NOTIFY_BIT_CHANSEL_EMBED_RUNAWAY MK_BIT64(36)
/** Embedded data received without line-start packet */
#define CAPTURE_STATUS_NOTIFY_BIT_CHANSEL_EMBED_SPURIOUS MK_BIT64(37)
/** Embedded data line is too long */
#define CAPTURE_STATUS_NOTIFY_BIT_CHANSEL_EMBED_LONG_LINE MK_BIT64(38)
/**
* Embedded data received when not expected. Sensor has been
* programmed to send embedded data but the capture has
* not been programmed to expect it.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_CHANSEL_EMBED_INFRINGE MK_BIT64(39)
/** Invalid pixel datatype in pixel packet or line-start packet */
#define CAPTURE_STATUS_NOTIFY_BIT_CHANSEL_DTYPE_MISMATCH MK_BIT64(40)
/** Short frame: frame has too few pixel lines */
#define CAPTURE_STATUS_NOTIFY_BIT_CHANSEL_PIX_SHORT MK_BIT64(42)
/** Short frame: frame has too few embedded data lines */
#define CAPTURE_STATUS_NOTIFY_BIT_CHANSEL_EMB_SHORT MK_BIT64(43)
/**
* VI hardware failure detected by
* (@ref CAPTURE_CHANNEL_FLAG_ENABLE_VI_PFSD).
*/
#define CAPTURE_STATUS_NOTIFY_BIT_PFSD_FAULT MK_BIT64(44)
/**
* Frame was truncated due to a frame timeout, or
* a channel reset or channel release operation.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_CHANSEL_FAULT_FE MK_BIT64(45)
/**
* Incoming frame was not matched by any VI channel.This error is
* usually caused by not having a pending capture request ready to
* catch the incoming frame. The frame will be dropped. This often
* indicates a request starvation condition that may be caused by
* performance issues on the client side.
*
* This is not a frame corrupting error and may also be present
* in the capture status of a subsequent successful request.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_CHANSEL_NO_MATCH MK_BIT64(46)
/**
* More than one VI channel match the same incoming frame.
* Two or more channels have been configured to catch frames
* from the same source. Only one of the channels will capture
* the frame and the other one will report this error for the
* conflicting capture request.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_CHANSEL_COLLISION MK_BIT64(47)
/**
* Channel reconfigured while in frame.
*
* @deprecated
* This is not an error and this status should not been seen
* in practice.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_CHANSEL_LOAD_FRAMED MK_BIT64(48)
/**
* Internal overflow in ATOMP packer. This is Internal
* hardware error that should not occur in normal use.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_ATOMP_PACKER_OVERFLOW MK_BIT64(49)
/**
* Frame truncated while writing to system memory.
* Indicates memory back-pressure due to insufficient memory
* bandwidth or an excessive memory access latency.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_ATOMP_FRAME_TRUNCATED MK_BIT64(50)
/**
* Frame dropped while writing to system memory.
* Indicates memory back-pressure due to insufficient memory
* bandwidth or an excessive memory access latency.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_ATOMP_FRAME_TOSSED MK_BIT64(51)
/** Unclassified error. Should not happen. */
#define CAPTURE_STATUS_NOTIFY_BIT_UNCLASSIFIED_ERROR MK_BIT64(63)
/**
* @deprecated
* Replaced by @ref CAPTURE_STATUS_NOTIFY_BIT_UNCLASSIFIED_ERROR.
*/
#define CAPTURE_STATUS_NOTIFY_BIT_NON_CLASSIFIED_0 MK_BIT64(63)
/** @} */
/**
* NVCSI error status.
*
* Error bits representing errors which were reported by NVCSI since
* previous capture.
*
* Multiple errors of same kind are collated into single bit.
*
* NVCSI error status is likely, but not guaranteed to affect current frame:
*
* 1. NVCSI error status is retrieved at end-of-frame VI event. NVCSI may already
* retrieve next frame data at this time.
*
* 2. NVCSI Error may also indicate error from older CSI data if there were frame
* skips between captures.
*
*/
struct nvcsi_error_status nvcsi_err_status;
} CAPTURE_IVC_ALIGN;
/**
* @brief The compand configuration describes a piece-wise linear
* tranformation function used by the VI companding module.
*/
#define VI_NUM_COMPAND_KNEEPTS MK_SIZE(10)
struct vi_compand_config {
/** Input position for this knee point */
uint32_t base[VI_NUM_COMPAND_KNEEPTS];
/** Scale above this knee point */
uint32_t scale[VI_NUM_COMPAND_KNEEPTS];
/** Output offset for this knee point */
uint32_t offset[VI_NUM_COMPAND_KNEEPTS];
} CAPTURE_IVC_ALIGN;
/*
* @brief VI Phase Detection Auto Focus (PDAF) configuration
*
* The PDAF data consists of special pixels that will be extracted from a frame
* and written to a separate surface. The PDAF pattern is shared by all capture channels
* and should be configured before enabling PDAF pixel extraction for a specific capture.
*
* Pixel { x, y } will be ouput to the PDAF surface (surface1) if the
* bit at position (x % 32) in pattern[y % 32] is set.
*
* Pixel { x, y } in the main output surface (surface0) will be
* replaced by a default pixel value if the bit at position (x % 32)
* in pattern_replace[y % 32] is set.
*/
#define VI_PDAF_PATTERN_SIZE 32
struct vi_pdaf_config {
/**
* Pixel bitmap, by line PATTERN[y0][x0] is set if the pixel (x % 32) == x0, (y % 32) == y0
* should be output to the PDAF surface
*/
uint32_t pattern[VI_PDAF_PATTERN_SIZE];
/**
* Pixel bitmap to be used for Replace the pdaf pixel, by line
* PATTERN_REPLACE[y0][x0] is set if the pixel (x % 32) == x0, (y % 32) == y0
* should be output to the PDAF surface
*/
uint32_t pattern_replace[VI_PDAF_PATTERN_SIZE];
} CAPTURE_IVC_ALIGN;
/*
* @brief VI SYNCGEN unit configuration.
*/
struct vi_syncgen_config {
/**
* Half cycle - Unsigned floating point.
* Decimal point position is given by FRAC_BITS in HCLK_DIV_FMT.
* Frequency of HCLK = SYNCGEN_CLK / (HALF_CYCLE * 2)
*/
uint32_t hclk_div;
/** Number of fractional bits of HALF_CYCLE */
uint8_t hclk_div_fmt;
/** Horizontal sync signal */
uint8_t xhs_width;
/** Vertical sync signal */
uint8_t xvs_width;
/** Cycles to delay after XVS before assert XHS */
uint8_t xvs_to_xhs_delay;
/** Resevred - UNUSED */
uint16_t cvs_interval;
/** Reserved */
uint16_t pad1__;
/** Reserved */
uint32_t pad2__;
} CAPTURE_IVC_ALIGN;
/**
* @brief VI PFSD Configuration.
*
* The PDAF replacement function is used in PFSD mode. Pixels within a
* designated region are replaced by a test pattern, and output pixels
* from the region are compared against expected values after a capture.
*/
struct vi_pfsd_config {
/**
* Region within which the pixels are replaced with a test pattern.
*/
struct replace_roi_rec {
/**
* left pixel column of the replacement region [0, UINT16_MAX].
*/
uint16_t left;
/**
* right pixel column of the replacement region (inclusive)
* [0, UINT16_MAX].
*/
uint16_t right;
/** top pixel row of the replacement region [0, UINT16_MAX]. */
uint16_t top;
/**
* bottom pixel row of the replacement region (inclusive)
* [0, UINT16_MAX].
*/
uint16_t bottom;
} replace_roi; /**< Pixel replacement region. */
/**
* The test pattern used to replace pixels within the region
* [0, 0xFFFFF]. The value is defined in the nvcsi2vi pixel
* bus format. The actual value range depends on the
* @ref NvCsiDataType "CSI datatype".
*/
uint32_t replace_value;
/**
* Count of items in the @ref expected array
* [0, VI_NUM_VI_PFSD_SURFACES]. If zero, PFSD
* will not be performed for this frame
*/
uint32_t expected_count;
/**
* Array of area definitions for output surfaces that will be
* verified. For YUV422 semi-planar, [0] is the Y surface and
* [1] ist the UV surface.
*/
struct {
/**
* Byte offset for the roi from beginning of the surface
* [0, UINT32_MAX].
*/
uint32_t offset;
/**
* Number of bytes that need to be read from the output
* surface [0, 255].
*/
uint32_t len;
/**
* Sequence of expected values [0, UINT8_MAX]. The 4 byte
* pattern is repeated until @ref len bytes have been
* compared.
*/
uint8_t value[4];
} expected[VI_NUM_VI_PFSD_SURFACES]; /**< Expected PFSD values. */
} CAPTURE_IVC_ALIGN;
/**
* @defgroup CaptureRequestFlags Capture request flags
*/
/** @{ */
/** Enable capture status and error reporting for the channel. */
#define CAPTURE_FLAG_STATUS_REPORT_ENABLE MK_BIT32(0)
/**
* Enable error reporting only for the channel. No effect if
* @ref CAPTURE_FLAG_STATUS_REPORT_ENABLE is set.
*/
#define CAPTURE_FLAG_ERROR_REPORT_ENABLE MK_BIT32(1)
/** @} */
/**
* @brief Memory surface specs passed from KMD to RCE
*/
struct memoryinfo_surface {
/**
* Surface IOVA address. Must be a multiple of
* @ref NV_ENGINE_STATUS_SURFACE_SIZE for engine status
* buffers. Must be a multiple of 64 for image buffers.
* Must be non-zero if @ref size > 0.
*/
uint64_t base_address;
/**
* Surface size. Must be a multiple of
* @ref NV_ENGINE_STATUS_SURFACE_SIZE for engine status
* buffers. Must be multiple of 64 for image buffers.
*/
uint64_t size;
};
/**
* @brief VI capture descriptor memory information
*
* VI capture descriptor memory information shared between
* KMD and RCE only. This information cannot be part of
* capture descriptor since descriptor is shared with usermode
* application.
*/
struct capture_descriptor_memoryinfo {
/** VI output surfaces */
struct memoryinfo_surface surface[VI_NUM_ATOMP_SURFACES];
/**
* Base IOVA of @ref capture_vi_engine_status
* "VI engine status" surface. Must be a multiple of
* @ref NV_ENGINE_STATUS_SURFACE_SIZE. Must be non-zero if
* @ref engine_status_surface_size > 0.
*/
uint64_t engine_status_surface_base_address;
/**
* Size of engine status surface.
* Must be >= @ref NV_ENGINE_STATUS_SURFACE_SIZE.
*/
uint64_t engine_status_surface_size;
/** Memory surface for watermark ring buffer written by VI FW */
struct memoryinfo_surface watermark_surface;
/** Reserved */
uint32_t reserved32[8];
} CAPTURE_DESCRIPTOR_ALIGN;
/**
* @brief VI frame capture context.
*/
struct capture_descriptor {
/** Capture request sequence number [0, UINT32_MAX]. */
uint32_t sequence;
/** See @ref CaptureRequestFlags "capture request flags". */
uint32_t capture_flags;
/**
* Task descriptor frame start timeout in milliseconds
* [0, UINT16_MAX].
*/
uint16_t frame_start_timeout;
/**
* Task descriptor frame completion timeout in milliseconds
* [0, UINT16_MAX].
*/
uint16_t frame_completion_timeout;
#define CAPTURE_PREFENCE_ARRAY_SIZE 2
/**
* @deprecated
* Not supported.
*/
uint32_t prefence_count CAMRTC_DEPRECATED;
/**
* @deprecated
* Not supported.
*/
struct syncpoint_info prefence[CAPTURE_PREFENCE_ARRAY_SIZE] CAMRTC_DEPRECATED;
/** VI Channel configuration. */
struct vi_channel_config ch_cfg;
/**
* VI PFSD Configuration.
* The @ref CAPTURE_CHANNEL_FLAG_ENABLE_VI_PFSD is set in
* @ref channel_flags for this setting to take effect.
*/
struct vi_pfsd_config pfsd_cfg;
/**
* Memory buffer for @ref capture_vi_engine_status
* "VI engine status", written by VI when a frame
* is complete.
*
* This is only valid in the UMD-KMD interface.
* The content is undefined in the RCE FW interface.
*/
struct engine_status_surface engine_status;
/**
* Capture status record. Written by RCE when the capture
* request is completed.
*/
struct capture_status status;
/** Unique ID for the output buffer used for watermarking */
uint64_t output_buffer_id;
/** Offset for the next watermark within the watermark surface */
struct watermark_mem_offset watermark_offset;
/** Reserved */
uint32_t pad32__[10];
} CAPTURE_DESCRIPTOR_ALIGN;
/**
* @brief - Event data used for event injection
*/
struct event_inject_msg {
/** UMD populates with capture status events. RCE converts to reg offset */
uint32_t tag;
/** Timestamp of event */
uint32_t stamp;
/** Bits [0:31] of event data */
uint32_t data;
/** Bits [32:63] of event data */
uint32_t data_ext;
};
/**
* @defgroup ViChanselErrMask VI CHANSEL error numbers
* @{
*/
#define VI_HSM_CHANSEL_ERROR_MASK_BIT_NOMATCH MK_U32(1)
/** @} */
/**
* @brief VI EC/HSM global CHANSEL error masking
*/
struct vi_hsm_chansel_error_mask_config {
/**
* This error mask applies only to errors that are masked in @ref
* chansel_uncorrectable_mask. By default, all such errors are reported
* to System Error Handler as corrected. If a specific error is masked
* in both this mask and in @ref error_mask_uncorrectable, by setting
* the corresponding bit (1 << <em>error number</em>) in the error mask
* (see @ref ViChanselErrMask "VI CHANSEL error numbers"), the error
* will not be reported to System Error Handler at all.
*
* A corrected safety error will be interpreted by System Error Handler
* as an indication that a single frame has been corrupted or dropped.
*/
uint32_t chansel_correctable_mask;
/**
* Error mask for suppressing uncorrected safety errors (see @ref
* ViChanselErrMask "VI CHANSEL error numbers"). If the mask is set
* to zero, VI CHANSEL errors will be reported as uncorrected safety
* errors. If a specific error is masked by setting the corresponding
* bit (1 << <em>error number</em>) in the error mask, the error will
* not be reported as uncorrected. Note that the error may still be
* reported as a corrected error unless it is also masked in
* @ref chansel_correctable_mask.
*
* An uncorrected error will be interpreted by System Error Handler
* as an indication that a camera is off-line and cannot continue
* the capture.
*/
uint32_t chansel_uncorrectable_mask;
} CAPTURE_IVC_ALIGN;
/**
* NvPhy attributes
*/
/**
* @defgroup NvPhyType
* NvCSI Physical stream type
* @{
*/
/** Use MIPI CSI protocol. */
#define NVPHY_TYPE_CSI MK_U32(0)
/**
* @deprecated
* Sony SLVSEC protocol not supported from T234 onwards.
*/
#define NVPHY_TYPE_SLVSEC MK_U32(1)
/**@}*/
/**
* NVCSI attributes
*/
/**
* @defgroup NvCsiPort NvCSI Port
* @{
*/
/** Port A maps to @ref NVCSI_STREAM_0. */
#define NVCSI_PORT_A MK_U32(0x0)
/** Port B maps to @ref NVCSI_STREAM_1. */
#define NVCSI_PORT_B MK_U32(0x1)
/** Port C maps to @ref NVCSI_STREAM_2. */
#define NVCSI_PORT_C MK_U32(0x2)
/** Port D maps to @ref NVCSI_STREAM_3. */
#define NVCSI_PORT_D MK_U32(0x3)
/** Port E maps to @ref NVCSI_STREAM_4. */
#define NVCSI_PORT_E MK_U32(0x4)
/**
* Port F maps to @ref NVCSI_STREAM_4 with a custom
* lane swizzle configuration to swap lanes A0 and A1 with B0 and B1.
* Not compatible with @ref nvcsi_brick_config::lane_swizzle setting.
*/
#define NVCSI_PORT_F MK_U32(0x5)
/** Port G maps to @ref NVCSI_STREAM_5. */
#define NVCSI_PORT_G MK_U32(0x6)
/**
* Port H maps to @ref NVCSI_STREAM_5 with a custom
* lane swizzle configuration to swap lanes A0 and A1 with B0 and B1.
* Not compatible with @ref nvcsi_brick_config::lane_swizzle setting.
*/
#define NVCSI_PORT_H MK_U32(0x7)
/** Port not specified. */
#define NVCSI_PORT_UNSPECIFIED MK_U32(0xFFFFFFFF)
/**@}*/
/**
* @defgroup NvCsiStream NVCSI stream id
* @{
*/
/** NVCSI stream 0 (brick 0 partition A). Maps to @ref NVCSI_PORT_A. */
#define NVCSI_STREAM_0 MK_U32(0x0)
/** NVCSI stream 1 (brick 0 partition B). Maps to @ref NVCSI_PORT_B. */
#define NVCSI_STREAM_1 MK_U32(0x1)
/** NVCSI stream 2 (brick 1 partition A). Maps to @ref NVCSI_PORT_C. */
#define NVCSI_STREAM_2 MK_U32(0x2)
/** NVCSI stream 3 (brick 1 partition B). Maps to @ref NVCSI_PORT_D. */
#define NVCSI_STREAM_3 MK_U32(0x3)
/**
* NVCSI stream 4 (brick 2). Maps to @ref NVCSI_PORT_E and to
* @ref NVCSI_PORT_F with a custom lane swizzle configuration to
* swap lanes A0 and A1 with B0 and B1.
*/
#define NVCSI_STREAM_4 MK_U32(0x4)
/**
* NVCSI stream 5 (brick 3). Maps to @ref NVCSI_PORT_G and to
* @ref NVCSI_PORT_H with a custom lane swizzle configuration to
* swap lanes A0 and A1 with B0 and B1.
*/
#define NVCSI_STREAM_5 MK_U32(0x5)
/**@}*/
/**
* @defgroup NvCsiVirtualChannel NVCSI virtual channels
* @{
*/
/** CSI virtual channel 0 */
#define NVCSI_VIRTUAL_CHANNEL_0 MK_U32(0x0)
/** CSI virtual channel 1 */
#define NVCSI_VIRTUAL_CHANNEL_1 MK_U32(0x1)
/** CSI virtual channel 2 */
#define NVCSI_VIRTUAL_CHANNEL_2 MK_U32(0x2)
/** CSI virtual channel 3 */
#define NVCSI_VIRTUAL_CHANNEL_3 MK_U32(0x3)
/** CSI virtual channel 4 */
#define NVCSI_VIRTUAL_CHANNEL_4 MK_U32(0x4)
/** CSI virtual channel 5 */
#define NVCSI_VIRTUAL_CHANNEL_5 MK_U32(0x5)
/** CSI virtual channel 6 */
#define NVCSI_VIRTUAL_CHANNEL_6 MK_U32(0x6)
/** CSI virtual channel 7 */
#define NVCSI_VIRTUAL_CHANNEL_7 MK_U32(0x7)
/** CSI virtual channel 8 */
#define NVCSI_VIRTUAL_CHANNEL_8 MK_U32(0x8)
/** CSI virtual channel 9 */
#define NVCSI_VIRTUAL_CHANNEL_9 MK_U32(0x9)
/** CSI virtual channel 10 */
#define NVCSI_VIRTUAL_CHANNEL_10 MK_U32(0xA)
/** CSI virtual channel 11 */
#define NVCSI_VIRTUAL_CHANNEL_11 MK_U32(0xB)
/** CSI virtual channel 12 */
#define NVCSI_VIRTUAL_CHANNEL_12 MK_U32(0xC)
/** CSI virtual channel 13 */
#define NVCSI_VIRTUAL_CHANNEL_13 MK_U32(0xD)
/** CSI virtual channel 14 */
#define NVCSI_VIRTUAL_CHANNEL_14 MK_U32(0xE)
/** CSI virtual channel 15 */
#define NVCSI_VIRTUAL_CHANNEL_15 MK_U32(0xF)
/**@}*/
/**
* @defgroup NvCsiConfigFlags NvCSI Configuration Flags
* @{
*/
/**
* Brick configuration is present in
* @ref CAPTURE_CSI_STREAM_SET_CONFIG_REQ_MSG::brick_config.
*/
#define NVCSI_CONFIG_FLAG_BRICK MK_BIT32(0)
/**
* CIL configuration is present in
* @ref CAPTURE_CSI_STREAM_SET_CONFIG_REQ_MSG::cil_config.
*/
#define NVCSI_CONFIG_FLAG_CIL MK_BIT32(1)
/**
* Error configuration is present in
* @ref CAPTURE_CSI_STREAM_SET_CONFIG_REQ_MSG::error_config.
*/
#define NVCSI_CONFIG_FLAG_ERROR MK_BIT32(2)
/**@}*/
/**
* @brief Number of lanes/trios per brick
*/
#define NVCSI_BRICK_NUM_LANES MK_U32(4)
/**
* @brief Number of override exception data types
*/
#define NVCSI_NUM_NOOVERRIDE_DT MK_U32(5)
/**
* @defgroup NvCsiPhyType NVCSI physical types
* @{
*/
/** NVCSI D-PHY physical layer */
#define NVCSI_PHY_TYPE_DPHY MK_U32(0)
/** NVCSI D-PHY physical layer */
#define NVCSI_PHY_TYPE_CPHY MK_U32(1)
/** @} */
/**
* @defgroup NvCsiLaneSwizzle NVCSI lane swizzles
* @{
*/
/** 00000 := A0 A1 B0 B1 --> A0 A1 B0 B1 */
#define NVCSI_LANE_SWIZZLE_A0A1B0B1 MK_U32(0x00)
/** 00001 := A0 A1 B0 B1 --> A0 A1 B1 B0 */
#define NVCSI_LANE_SWIZZLE_A0A1B1B0 MK_U32(0x01)
/** 00010 := A0 A1 B0 B1 --> A0 B0 B1 A1 */
#define NVCSI_LANE_SWIZZLE_A0B0B1A1 MK_U32(0x02)
/** 00011 := A0 A1 B0 B1 --> A0 B0 A1 B1 */
#define NVCSI_LANE_SWIZZLE_A0B0A1B1 MK_U32(0x03)
/** 00100 := A0 A1 B0 B1 --> A0 B1 A1 B0 */
#define NVCSI_LANE_SWIZZLE_A0B1A1B0 MK_U32(0x04)
/** 00101 := A0 A1 B0 B1 --> A0 B1 B0 A1 */
#define NVCSI_LANE_SWIZZLE_A0B1B0A1 MK_U32(0x05)
/** 00110 := A0 A1 B0 B1 --> A1 A0 B0 B1 */
#define NVCSI_LANE_SWIZZLE_A1A0B0B1 MK_U32(0x06)
/** 00111 := A0 A1 B0 B1 --> A1 A0 B1 B0 */
#define NVCSI_LANE_SWIZZLE_A1A0B1B0 MK_U32(0x07)
/** 01000 := A0 A1 B0 B1 --> A1 B0 B1 A0 */
#define NVCSI_LANE_SWIZZLE_A1B0B1A0 MK_U32(0x08)
/** 01001 := A0 A1 B0 B1 --> A1 B0 A0 B1 */
#define NVCSI_LANE_SWIZZLE_A1B0A0B1 MK_U32(0x09)
/** 01010 := A0 A1 B0 B1 --> A1 B1 A0 B0 */
#define NVCSI_LANE_SWIZZLE_A1B1A0B0 MK_U32(0x0A)
/** 01011 := A0 A1 B0 B1 --> A1 B1 B0 A0 */
#define NVCSI_LANE_SWIZZLE_A1B1B0A0 MK_U32(0x0B)
/** 01100 := A0 A1 B0 B1 --> B0 A1 A0 B1 */
#define NVCSI_LANE_SWIZZLE_B0A1A0B1 MK_U32(0x0C)
/** 01101 := A0 A1 B0 B1 --> B0 A1 B1 A0 */
#define NVCSI_LANE_SWIZZLE_B0A1B1A0 MK_U32(0x0D)
/** 01110 := A0 A1 B0 B1 --> B0 A0 B1 A1 */
#define NVCSI_LANE_SWIZZLE_B0A0B1A1 MK_U32(0x0E)
/** 01111 := A0 A1 B0 B1 --> B0 A0 A1 B1 */
#define NVCSI_LANE_SWIZZLE_B0A0A1B1 MK_U32(0x0F)
/** 10000 := A0 A1 B0 B1 --> B0 B1 A1 A0 */
#define NVCSI_LANE_SWIZZLE_B0B1A1A0 MK_U32(0x10)
/** 10001 := A0 A1 B0 B1 --> B0 B1 A0 A1 */
#define NVCSI_LANE_SWIZZLE_B0B1A0A1 MK_U32(0x11)
/** 10010 := A0 A1 B0 B1 --> B1 A1 B0 A0 */
#define NVCSI_LANE_SWIZZLE_B1A1B0A0 MK_U32(0x12)
/** 10011 := A0 A1 B0 B1 --> B1 A1 A0 B0 */
#define NVCSI_LANE_SWIZZLE_B1A1A0B0 MK_U32(0x13)
/** 10100 := A0 A1 B0 B1 --> B1 B0 A0 A1 */
#define NVCSI_LANE_SWIZZLE_B1B0A0A1 MK_U32(0x14)
/** 10101 := A0 A1 B0 B1 --> B1 B0 A1 A0 */
#define NVCSI_LANE_SWIZZLE_B1B0A1A0 MK_U32(0x15)
/** 10110 := A0 A1 B0 B1 --> B1 A0 A1 B0 */
#define NVCSI_LANE_SWIZZLE_B1A0A1B0 MK_U32(0x16)
/** 10111 := A0 A1 B0 B1 --> B1 A0 B0 A1 */
#define NVCSI_LANE_SWIZZLE_B1A0B0A1 MK_U32(0x17)
/** @} */
/**
* @defgroup NvCsiDPhyPolarity NVCSI DPHY lane polarity
* @{
*/
/** Do not swap lane polarity */
#define NVCSI_DPHY_POLARITY_NOSWAP MK_U32(0)
/** Swap lane polarity */
#define NVCSI_DPHY_POLARITY_SWAP MK_U32(1)
/** @} */
/**
* @defgroup NvCsiCPhyPolarity NVCSI CPHY lane polarity
* @{
*/
/** 000 := A B C --> A B C */
#define NVCSI_CPHY_POLARITY_ABC MK_U32(0x00)
/** 001 := A B C --> A C B */
#define NVCSI_CPHY_POLARITY_ACB MK_U32(0x01)
/** 010 := A B C --> B C A */
#define NVCSI_CPHY_POLARITY_BCA MK_U32(0x02)
/** 011 := A B C --> B A C */
#define NVCSI_CPHY_POLARITY_BAC MK_U32(0x03)
/** 100 := A B C --> C A B */
#define NVCSI_CPHY_POLARITY_CAB MK_U32(0x04)
/** 101 := A B C --> C B A */
#define NVCSI_CPHY_POLARITY_CBA MK_U32(0x05)
/** @} */
/**
* @brief NvCSI Brick configuration
*/
struct nvcsi_brick_config {
/** Set @ref NvCsiPhyType "PHY mode" for both partitions. */
uint32_t phy_mode;
/**
* @ref NvCsiLaneSwizzle "NVCSI Lane swizzle" control for
* rearranging lanes on bricks. Valid for C-PHY and D-PHY modes.
*
* @note This setting is not compatible with @ref NVCSI_PORT_F
* and @ref NVCSI_PORT_H. Must be zero for these ports.
*/
uint32_t lane_swizzle;
/**
* Lane polarity control for each lane. Value depends on @ref phy_mode.
* See @ref NvCsiDPhyPolarity "NVCSI DPHY lane polarity" or
* @ref NvCsiCPhyPolarity "NVCSI CPHY lane polarity".
*/
uint8_t lane_polarity[NVCSI_BRICK_NUM_LANES];
/** Reserved */
uint32_t pad32__;
} CAPTURE_IVC_ALIGN;
/**
* @defgroup NvCsi2dShmoo control
* @{
*/
/** 2D shmoo mode disabled */
#define NVCSI_2D_SHMOO_DISABLED MK_U32(0)
/** 2D shmoo mode enabled. */
#define NVCSI_2D_SHMOO_ENABLED MK_U32(1)
/** @} */
/**
* @brief NvCSI CIL configuration for a brick partition.
*/
struct nvcsi_cil_config {
/**
* Number of data lanes used [0,@ref NVCSI_BRICK_NUM_LANES].
* @a num_lanes > 2 implies that both brick partitions (A and B)
* are controlled by CIL A and CIL B is unused. @a num_lanes > 2
* is not valid for CIL B.
*/
uint8_t num_lanes;
/**
* Bypass LP control sequence and go directly to HS RX mode on
* detecting LP00. (boolean)
*/
uint8_t lp_bypass_mode;
/**
* Set MIPI THS-SETTLE timing (LP clock cycles with SoC default
* clock rate) [0,255]. 0 = use default value calculated based
* on @ref mipi_clock_rate.
*/
uint8_t t_hs_settle;
/**
* Set MIPI TCLK-SETTLE timing (LP clock cycles with SoC default
* clock rate) [0,127]. 0 = use default value calculated based
* on @ref mipi_clock_rate.
*/
uint8_t t_clk_settle;
/**
* @deprecated
* Not supported.
*/
uint32_t cil_clock_rate CAMRTC_DEPRECATED;
/**
* MIPI clock rate (= physical data rate / 2) for DPHY [0,1250] kHz.
* MIPI symbol rate for CPHY [0,2500] kSps.
*/
uint32_t mipi_clock_rate;
/** Non-safety build, 2D Shmoo tuning parameters. */
struct {
/**
* Control register @a control [0,255]
* See @ref NvCsi2dShmoo
*/
uint8_t control;
/** @a afe_hf_gain [0,16] */
uint8_t afe_hf_gain;
/** @a edge_delay [-10,9] */
int8_t edge_delay;
} tuning;
/** Reserved */
uint8_t pad8__;
} CAPTURE_IVC_ALIGN;
/**
* @defgroup ViHsmCsimuxErrors Bitmask for CSIMUX errors reported to HSM
*/
/** @{ */
/** Error bit indicating next packet after a frame end was not a frame start */
#define VI_HSM_CSIMUX_ERROR_MASK_BIT_SPURIOUS_EVENT MK_BIT32(0)
/** Error bit indicating FIFO for the stream has over flowed */
#define VI_HSM_CSIMUX_ERROR_MASK_BIT_OVERFLOW MK_BIT32(1)
/** Error bit indicating frame start packet lost due to FIFO overflow */
#define VI_HSM_CSIMUX_ERROR_MASK_BIT_LOF MK_BIT32(2)
/** Error bit indicating that an illegal packet has been sent from NVCSI */
#define VI_HSM_CSIMUX_ERROR_MASK_BIT_BADPKT MK_BIT32(3)
/** @} */
/**
* @defgroup ViHsmCsimuxDefaultMasks Default bitmask for
* CSIMUX errors reported to HSM
* @{
*/
/**
* Default value for
* @ref vi_hsm_csimux_error_mask_config::error_mask_correctable
*/
#define VI_HSM_CSIMUX_ERROR_CFG_DFLT_CORRECTABLE MK_U32(0)
/**
* Default value for
* @ref vi_hsm_csimux_error_mask_config::error_mask_uncorrectable
*/
#define VI_HSM_CSIMUX_ERROR_CFG_DFLT_UNCORRECTABLE (~( \
VI_HSM_CSIMUX_ERROR_MASK_BIT_OVERFLOW | \
VI_HSM_CSIMUX_ERROR_MASK_BIT_LOF))
/** @} */
/**
* @brief VI EC/HSM error masking configuration
*/
struct vi_hsm_csimux_error_mask_config {
/**
* Mask correctable CSIMUX. See @ref ViHsmCsimuxErrors "CSIMUX error bitmask".
*
* @note By default, this mask should be initialized to
* @ref VI_HSM_CSIMUX_ERROR_CFG_DFLT_CORRECTABLE.
*/
uint32_t error_mask_correctable;
/**
* Mask uncorrectable CSIMUX. See @ref ViHsmCsimuxErrors "CSIMUX error bitmask".
*
* @note By default, this mask should be initialized to
* @ref VI_HSM_CSIMUX_ERROR_CFG_DFLT_UNCORRECTABLE.
*/
uint32_t error_mask_uncorrectable;
} CAPTURE_IVC_ALIGN;
/**
* @defgroup NVCSI_HOST1X_INTR_FLAGS NVCSI Host1x client global interrupt flags
* @{
*/
/** Error bit indicating Host1x client timeout error */
#define NVCSI_INTR_FLAG_HOST1X_TIMEOUT_ERR MK_BIT32(0)
/** @} */
/**
* @defgroup NVCSI_STREAM_INTR_FLAGS NVCSI stream interrupt flags
* @{
*/
/** Multi bit error in the DPHY packet header */
#define NVCSI_INTR_FLAG_STREAM_NOVC_ERR_PH_ECC_MULTI_BIT MK_BIT32(0)
/** Error bit indicating both of the CPHY packet header CRC check fail */
#define NVCSI_INTR_FLAG_STREAM_NOVC_ERR_PH_BOTH_CRC MK_BIT32(1)
/** Error bit indicating VC Pixel Parser (PP) FSM timeout for a pixel line.*/
#define NVCSI_INTR_FLAG_STREAM_VC_ERR_PPFSM_TIMEOUT MK_BIT32(2)
/** Error bit indicating VC has packet with single bit ECC error in the packet header*/
#define NVCSI_INTR_FLAG_STREAM_VC_ERR_PH_ECC_SINGLE_BIT MK_BIT32(3)
/** Error bit indicating VC has packet payload crc check fail */
#define NVCSI_INTR_FLAG_STREAM_VC_ERR_PD_CRC MK_BIT32(4)
/** Error bit indicating VC has packet terminate before getting the expect word count data. */
#define NVCSI_INTR_FLAG_STREAM_VC_ERR_PD_WC_SHORT MK_BIT32(5)
/** Error bit indicating VC has one of the CPHY packet header CRC check fail. */
#define NVCSI_INTR_FLAG_STREAM_VC_ERR_PH_SINGLE_CRC MK_BIT32(6)
/** Error bit indicating VC has an embedded data CRC check fail. */
#define NVCSI_INTR_FLAG_EMBEDDED_LINE_CRC MK_BIT32(7)
/** @} */
/**
* @defgroup NVCSI_CIL_INTR_FLAGS NVCSI phy/cil interrupt flags
* @{
*/
/** LP sequence error detected on clock lane. */
#define NVCSI_INTR_FLAG_CIL_INTR_DPHY_ERR_CLK_LANE_CTRL MK_BIT32(0)
/** Single bit error detected in the lane 0 sync word. */
#define NVCSI_INTR_FLAG_CIL_INTR_DATA_LANE_ERR0_SOT_SB MK_BIT32(1)
/** Multiple bit errors detected in the data lane 0 sync word */
#define NVCSI_INTR_FLAG_CIL_INTR_DATA_LANE_ERR0_SOT_MB MK_BIT32(2)
/** LP sequence error detected on DATA lane 0. */
#define NVCSI_INTR_FLAG_CIL_INTR_DATA_LANE_ERR0_CTRL MK_BIT32(3)
/** Data lane 0 receive FIFO overflow. */
#define NVCSI_INTR_FLAG_CIL_INTR_DATA_LANE_ERR0_RXFIFO_FULL MK_BIT32(4)
/** Single bit error detected in the lane 1 sync word. */
#define NVCSI_INTR_FLAG_CIL_INTR_DATA_LANE_ERR1_SOT_SB MK_BIT32(5)
/** Multiple bit errors detected in the data lane 1 sync word. */
#define NVCSI_INTR_FLAG_CIL_INTR_DATA_LANE_ERR1_SOT_MB MK_BIT32(6)
/** LP sequence error detected on DATA lane 1. */
#define NVCSI_INTR_FLAG_CIL_INTR_DATA_LANE_ERR1_CTRL MK_BIT32(7)
/** Data lane 1 receive FIFO overflow. */
#define NVCSI_INTR_FLAG_CIL_INTR_DATA_LANE_ERR1_RXFIFO_FULL MK_BIT32(8)
/**
* DPHY skew calibration did not complete while sweeping the
* data lane 0 trimmer. This will happen if the calibration
* sequence is not long enough.
*/
#define NVCSI_INTR_FLAG_CIL_INTR_DPHY_DESKEW_CALIB_ERR_LANE0 MK_BIT32(9)
/**
* DPHY skew calibration did not complete while sweeping the
* data lane 1 trimmer. This will happen if the calibration
* sequence is not long enough.
*/
#define NVCSI_INTR_FLAG_CIL_INTR_DPHY_DESKEW_CALIB_ERR_LANE1 MK_BIT32(10)
/**
* DPHY skew calibration did not complete while sweeping the
* clock lane trimmer. This will happen if the calibration
* sequence is not long enough.
*/
#define NVCSI_INTR_FLAG_CIL_INTR_DPHY_DESKEW_CALIB_ERR_CTRL MK_BIT32(11)
/**
* Lane alignment error. Some lanes detected a sync word while
* other lanes did not.
*/
#define NVCSI_INTR_FLAG_CIL_INTR_DPHY_LANE_ALIGN_ERR MK_BIT32(12)
/** Escape mode sync error on lane 0. */
#define NVCSI_INTR_FLAG_CIL_INTR_DATA_LANE_ERR0_ESC_MODE_SYNC MK_BIT32(13)
/** Escape mode sync error on lane 1. */
#define NVCSI_INTR_FLAG_CIL_INTR_DATA_LANE_ERR1_ESC_MODE_SYNC MK_BIT32(14)
/** @} */
/**
* @defgroup NVCSI_CIL_INTR0_FLAGS NVCSI phy/cil intr0 flags
* @{
*/
/** LP sequence error detected on clock lane. */
#define NVCSI_INTR_FLAG_CIL_INTR0_DPHY_ERR_CLK_LANE_CTRL MK_BIT32(0)
/** Single bit error detected in the lane 0 sync word. */
#define NVCSI_INTR_FLAG_CIL_INTR0_DATA_LANE_ERR0_SOT_SB MK_BIT32(1)
/** Multiple bit errors detected in the data lane 0 sync word */
#define NVCSI_INTR_FLAG_CIL_INTR0_DATA_LANE_ERR0_SOT_MB MK_BIT32(2)
/** LP sequence error detected on DATA lane 0. */
#define NVCSI_INTR_FLAG_CIL_INTR0_DATA_LANE_ERR0_CTRL MK_BIT32(3)
/** Data lane 0 receive FIFO overflow. */
#define NVCSI_INTR_FLAG_CIL_INTR0_DATA_LANE_ERR0_RXFIFO_FULL MK_BIT32(4)
/** Single bit error detected in the lane 1 sync word. */
#define NVCSI_INTR_FLAG_CIL_INTR0_DATA_LANE_ERR1_SOT_SB MK_BIT32(5)
/** Multiple bit errors detected in the data lane 1 sync word. */
#define NVCSI_INTR_FLAG_CIL_INTR0_DATA_LANE_ERR1_SOT_MB MK_BIT32(6)
/** LP sequence error detected on DATA lane 1. */
#define NVCSI_INTR_FLAG_CIL_INTR0_DATA_LANE_ERR1_CTRL MK_BIT32(7)
/** Data lane 1 receive FIFO overflow. */
#define NVCSI_INTR_FLAG_CIL_INTR0_DATA_LANE_ERR1_RXFIFO_FULL MK_BIT32(8)
/** Escape mode sync error on lane 0. */
#define NVCSI_INTR_FLAG_CIL_INTR0_DATA_LANE_ERR0_ESC_MODE_SYNC MK_BIT32(19)
/** Escape mode sync error on lane 1. */
#define NVCSI_INTR_FLAG_CIL_INTR0_DATA_LANE_ERR1_ESC_MODE_SYNC MK_BIT32(20)
/** DPHY de-skew calibration done one lane 0 */
#define NVCSI_INTR_FLAG_CIL_INTR0_DPHY_DESKEW_CALIB_DONE_LANE0 MK_BIT32(22)
/** DPHY de-skew calibration done one lane 1 */
#define NVCSI_INTR_FLAG_CIL_INTR0_DPHY_DESKEW_CALIB_DONE_LANE1 MK_BIT32(23)
/** DPHY de-skew calibration done one clk lane */
#define NVCSI_INTR_FLAG_CIL_INTR0_DPHY_DESKEW_CALIB_DONE_CTRL MK_BIT32(24)
/**
* DPHY skew calibration did not complete while sweeping the
* data lane 0 trimmer. This will happen if the calibration
* sequence is not long enough.
*/
#define NVCSI_INTR_FLAG_CIL_INTR0_DPHY_DESKEW_CALIB_ERR_LANE0 MK_BIT32(25)
/**
* DPHY skew calibration did not complete while sweeping the
* data lane 1 trimmer. This will happen if the calibration
* sequence is not long enough.
*/
#define NVCSI_INTR_FLAG_CIL_INTR0_DPHY_DESKEW_CALIB_ERR_LANE1 MK_BIT32(26)
/**
* DPHY skew calibration did not complete while sweeping the
* clock lane trimmer. This will happen if the calibration
* sequence is not long enough.
*/
#define NVCSI_INTR_FLAG_CIL_INTR0_DPHY_DESKEW_CALIB_ERR_CTRL MK_BIT32(27)
/**
* Lane alignment error. Some lanes detected a sync word while
* other lanes did not.
*/
#define NVCSI_INTR_FLAG_CIL_INTR0_DPHY_LANE_ALIGN_ERR MK_BIT32(28)
/** @} */
/**
* @defgroup NVCSI_CIL_INTR1_FLAGS NVCSI phy/cil intr1 flags
* @{
*/
/** DPHY: escape mode command received on lane 0 */
#define NVCSI_INTR_FLAG_CIL_INTR1_DATA_LANE_ESC_CMD_REC0 MK_BIT32(0)
/** DPHY: escape mode data received on lane 0 */
#define NVCSI_INTR_FLAG_CIL_INTR1_DATA_LANE_ESC_DATA_REC0 MK_BIT32(1)
/** DPHY: escape mode command received on lane 1 */
#define NVCSI_INTR_FLAG_CIL_INTR1_DATA_LANE_ESC_CMD_REC1 MK_BIT32(2)
/** DPHY: escape mode data received on lane 1 */
#define NVCSI_INTR_FLAG_CIL_INTR1_DATA_LANE_ESC_DATA_REC1 MK_BIT32(3)
/** DPHY: Remote reset trigger escape code detected on lane 0 */
#define NVCSI_INTR_FLAG_CIL_INTR1_REMOTERST_TRIGGER_INT0 MK_BIT32(4)
/** DPHY: Ultra Low Power State escape code detected on lane 0 */
#define NVCSI_INTR_FLAG_CIL_INTR1_ULPS_TRIGGER_INT0 MK_BIT32(5)
/** DPHY: Ultra Low Power Data Transmission escape code detected on lane 1 */
#define NVCSI_INTR_FLAG_CIL_INTR1_LPDT_INT0 MK_BIT32(6)
/** DPHY: Remote reset trigger escape code detected on lane 1 */
#define NVCSI_INTR_FLAG_CIL_INTR1_REMOTERST_TRIGGER_INT1 MK_BIT32(7)
/** DPHY: Ultra Low Power State escape code detected on lane 0 */
#define NVCSI_INTR_FLAG_CIL_INTR1_ULPS_TRIGGER_INT1 MK_BIT32(8)
/** DPHY: Ultra Low Power Data Transmission escape code detected on lane 1 */
#define NVCSI_INTR_FLAG_CIL_INTR1_LPDT_INT1 MK_BIT32(9)
/** DPHY: Remote reset trigger escape code detected on clock lane */
#define NVCSI_INTR_FLAG_CIL_INTR1_DPHY_CLK_LANE_ULPM_REQ MK_BIT32(10)
/** @} */
/* Deprecated. Definitions needed only by RCE FW. */
#define NVCSI_INTR_CONFIG_SHIFT_STREAM_NOVC MK_U32(0x0)
#define NVCSI_INTR_CONFIG_SHIFT_STREAM_VC MK_U32(0x2)
#define NVCSI_INTR_CONFIG_MASK_STREAM_NOVC MK_U32(0x3)
#define NVCSI_INTR_CONFIG_MASK_STREAM_VC MK_U32(0xfc)
/**
* @defgroup NVCSI_INTR_CONFIG_MASK NVCSI interrupt config bit masks
* @{
*/
/** Mask for the bits in @ref NVCSI_HOST1X_INTR_FLAGS */
#define NVCSI_INTR_CONFIG_MASK_HOST1X MK_U32(0x1)
/** Bit mask for @ref NvCsiVirtualChannel "NVCSI virtual channels" */
#define NVCSI_INTR_CONFIG_MASK_STATUS2VI MK_U32(0xffff)
/** Mask for the bits in @ref NVCSI_STREAM_INTR_FLAGS */
#define NVCSI_INTR_CONFIG_MASK_STREAM KM_U32(0xff)
/** Mask for the bits in @ref NVCSI_CIL_INTR_FLAGS */
#define NVCSI_INTR_CONFIG_MASK_CIL_INTR MK_U32(0x1ffff)
/** Mask for the bits in @ref NVCSI_CIL_INTR0_FLAGS */
#define NVCSI_INTR_CONFIG_MASK_CIL_INTR0 MK_U32(0x1fd801ff)
/** Mask for the bits in @ref NVCSI_CIL_INTR1_FLAGS */
#define NVCSI_INTR_CONFIG_MASK_CIL_INTR1 MK_U32(0x7ff)
/** @} */
/**
* @defgroup NVCSI_INTR_CONFIG_DEFAULTS NVCSI default error config
* @{
*/
/** Default value for @ref nvcsi_error_config::host1x_intr_mask_lic */
#define NVCSI_ERROR_CFG_DFLT_HOST1X_LIC MK_U32(0x0)
/** Default value for @ref nvcsi_error_config::host1x_intr_mask_hsm */
#define NVCSI_ERROR_CFG_DFLT_HOST1X_HSM MK_U32(0x0)
/** Default value for @ref nvcsi_error_config::host1x_intr_type_hsm */
#define NVCSI_ERROR_CFG_DFLT_HOST1X_TYPE_HSM NVCSI_INTR_CONFIG_MASK_HOST1X
/** Default value for @ref nvcsi_error_config::status2vi_notify_mask */
#define NVCSI_ERROR_CFG_DFLT_STATUS2VI MK_U32(0x0000)
/** Default value for @ref nvcsi_error_config::stream_intr_mask_lic */
#define NVCSI_ERROR_CFG_DFLT_STREAM_LIC MK_U32(0x00)
/** Default value for @ref nvcsi_error_config::stream_intr_mask_hsm */
#define NVCSI_ERROR_CFG_DFLT_STREAM_HSM NVCSI_INTR_CONFIG_MASK_STREAM
/** Default value for @ref nvcsi_error_config::stream_intr_type_hsm */
#define NVCSI_ERROR_CFG_DFLT_STREAM_TYPE_HSM MK_U32(0x00)
/** Default value for @ref nvcsi_error_config::cil_intr_type_hsm */
#define NVCSI_ERROR_CFG_DFLT_CIL_INTR_TYPE_HSM ( \
NVCSI_INTR_FLAG_CIL_INTR_DPHY_DESKEW_CALIB_ERR_LANE0 | \
NVCSI_INTR_FLAG_CIL_INTR_DPHY_DESKEW_CALIB_ERR_LANE1 | \
NVCSI_INTR_FLAG_CIL_INTR_DPHY_DESKEW_CALIB_ERR_CTRL)
/** Default value for @ref nvcsi_error_config::cil_intr_mask_hsm */
#define NVCSI_ERROR_CFG_DFLT_CIL_INTR_HSM \
(NVCSI_INTR_CONFIG_MASK_CIL_INTR & ~NVCSI_ERROR_CFG_DFLT_CIL_INTR_TYPE_HSM)
/** Default value for @ref nvcsi_error_config::cil_intr0_mask_lic */
#define NVCSI_ERROR_CFG_DFLT_CIL_INTR0_LIC MK_U32(0x00000000)
/** Default value for @ref nvcsi_error_config::cil_intr1_mask_lic */
#define NVCSI_ERROR_CFG_DFLT_CIL_INTR1_LIC MK_U32(0x000)
/** @} */
/**
* @brief User-defined error configuration.
*
* Flag NVCSI_CONFIG_FLAG_ERROR must be set to apply these settings,
* otherwise default settings will be used.
*
* The <em>name</em>_intr_mask_lic masks control error reporting
* inside RCE. The effect of these masks is primarily to suppress
* these errors from getting reported in RTCPU traces, for example
* in cases where the error interrupt occurs too frequently and is
* interfering with the readability of the traces. These masks
* have no practical effect on safety build, as tracing is not
* supported.
*
* The <em>name</em>_intr_mask_hsm masks control safety error
* reporting to SEH.
*
* The <em>name</em>_intr_type masks control the classification of
* safety errors reported to SEH (0 - corrected, 1 - uncorrected).
*/
struct nvcsi_error_config {
/**
* @brief Host1x client global interrupt mask.
* Bit field mapping: @ref NVCSI_HOST1X_INTR_FLAGS.
* Mask host1x errors reported locally in RCE.
*
* @note By default, this mask should be initialized to
* @ref NVCSI_ERROR_CFG_DFLT_HOST1X_LIC.
*
* @note RCE does not enable the host1x read access timeout,
* which is the only host1x error supported by the
* hardware, so this control has no effect in practise.
*
* @deprecated
* This control may be removed in the future.
*/
uint32_t host1x_intr_mask_lic;
/**
* @brief Host1x client global safety error mask.
* Bit field mapping: @ref NVCSI_HOST1X_INTR_FLAGS.
* Mask host1x errors reported to SEH.
*
* @note By default, this mask should be initialized to
* @ref NVCSI_ERROR_CFG_DFLT_HOST1X_HSM.
*
* @note RCE does not enable the host1x read access timeout,
* which is the only host1x error supported by the
* hardware, so this control has no effect in practise.
* This control may be removed in the future.
*
* @deprecated
* This control may be removed in the future.
*/
uint32_t host1x_intr_mask_hsm;
/**
* @brief Host1x client global safety error classification.
* Bit field mapping: @ref NVCSI_HOST1X_INTR_FLAGS
* (0 - corrected, 1 - uncorrected).
*
* @note By default, this mask should be initialized to
* @ref NVCSI_ERROR_CFG_DFLT_HOST1X_TYPE_HSM.
*
* @note RCE does not enable the host1x read access timeout,
* which is the only host1x error supported by the
* hardware, so this control has no effect in practise.
*
* @deprecated
* This control may be removed in the future.
*/
uint32_t host1x_intr_type_hsm;
/**
* @brief Setting BIT(@ref NvCsiVirtualChannel "NVCSI Virtual Channel")
* to 1 in this mask disables the reporting of
* @ref NvCsiVirtualChannelErrors "NVCSI virtual channel errors"
* to VI with frame-end for that channel.
*
* @note By default, this mask should be initialized to
* @ref NVCSI_ERROR_CFG_DFLT_STATUS2VI.
*/
uint32_t status2vi_notify_mask;
/**
* @brief NVCSI stream error interrupt mask.
* Mask NVCSI stream errors reported locally in RCE.
* Bit field mapping: @ref NVCSI_STREAM_INTR_FLAGS.
*
* @note By default, this mask should be initialized to
* @ref NVCSI_ERROR_CFG_DFLT_STREAM_LIC.
*
* @deprecated
* This control may be removed in the future.
*/
uint32_t stream_intr_mask_lic;
/**
* @brief NVCSI stream safety error mask.
* Mask NVCSI stream errors reported to SEH.
* Bit field mapping: @ref NVCSI_STREAM_INTR_FLAGS
*
* @note By default, this mask should be initialized to
* @ref NVCSI_ERROR_CFG_DFLT_STREAM_HSM.
*/
uint32_t stream_intr_mask_hsm;
/**
* @brief NVCSI stream safety error classification.
* Bit field mapping: @ref NVCSI_STREAM_INTR_FLAGS
* (0 - corrected, 1 - uncorrected)
*
* @note By default, this mask should be initialized to
* @ref NVCSI_ERROR_CFG_DFLT_STREAM_TYPE_HSM.
*/
uint32_t stream_intr_type_hsm;
/**
* @brief NVCSI CIL safety error mask.
* Mask NVCSI CIL errors reported to SEH.
* Bit field mapping: @ref NVCSI_CIL_INTR_FLAGS.
*
* @note By default, this mask should be initialized to
* @ref NVCSI_ERROR_CFG_DFLT_CIL_INTR_HSM.
*/
uint32_t cil_intr_mask_hsm;
/**
* @brief NVCSI CIL safety error classification.
* Bit field mapping: @ref NVCSI_CIL_INTR_FLAGS
* (0 - corrected, 1 - uncorrected)
*
* @note By default, this mask should be initialized to
* @ref NVCSI_ERROR_CFG_DFLT_CIL_INTR_TYPE_HSM.
*/
uint32_t cil_intr_type_hsm;
/**
* @brief NVCSI CIL interrupt mask 0.
* Mask NVCSI CIL errors reported locally in RCE.
* Bit field mapping: @ref NVCSI_CIL_INTR0_FLAGS.
*
* @note By default, this mask should be initialized to
* @ref NVCSI_ERROR_CFG_DFLT_CIL_INTR0_LIC.
*
* @deprecated
* This control may be removed in the future.
*/
uint32_t cil_intr0_mask_lic;
/**
* @brief NVCSI CIL interrupt mask 1.
* Mask NVCSI CIL events reported locally in RCE.
* Bit field mapping: @ref NVCSI_CIL_INTR1_FLAGS
*
* @note By default, this mask should be initialized to
* @ref NVCSI_ERROR_CFG_DFLT_CIL_INTR1_LIC.
*
* @deprecated
* This control may be removed in the future.
*/
uint32_t cil_intr1_mask_lic;
/** Reserved */
uint32_t pad32__;
/** VI EC/HSM error masking configuration */
struct vi_hsm_csimux_error_mask_config csimux_config;
} CAPTURE_IVC_ALIGN;
/**
* @defgroup NvCsiDataType NVCSI datatypes
* @{
*/
/** Datatype not specified */
#define NVCSI_DATATYPE_UNSPECIFIED MK_U32(0)
/** UYV420 8-bit */
#define NVCSI_DATATYPE_YUV420_8 MK_U32(24)
/** YUV420 10-bit */
#define NVCSI_DATATYPE_YUV420_10 MK_U32(25)
/** YUV420 8-bit (Legacy */
#define NVCSI_DATATYPE_LEG_YUV420_8 MK_U32(26)
/** YUV420 8-bit (CSPS) */
#define NVCSI_DATATYPE_YUV420CSPS_8 MK_U32(28)
/** YUV420 10-bit (CSPS) */
#define NVCSI_DATATYPE_YUV420CSPS_10 MK_U32(29)
/** UYV422 8-bit */
#define NVCSI_DATATYPE_YUV422_8 MK_U32(30)
/** YUV422 10-bit */
#define NVCSI_DATATYPE_YUV422_10 MK_U32(31)
/** 12-bit RGB (RGB444) */
#define NVCSI_DATATYPE_RGB444 MK_U32(32)
/** 15-bit RGB (RGB555) */
#define NVCSI_DATATYPE_RGB555 MK_U32(33)
/** 16-bit RGB (RGB565) */
#define NVCSI_DATATYPE_RGB565 MK_U32(34)
/** 18-bit RGB (RGB666) */
#define NVCSI_DATATYPE_RGB666 MK_U32(35)
/** 24-bit RGB (RGB888) */
#define NVCSI_DATATYPE_RGB888 MK_U32(36)
/** 6-bit raw */
#define NVCSI_DATATYPE_RAW6 MK_U32(40)
/** 7-bit raw */
#define NVCSI_DATATYPE_RAW7 MK_U32(41)
/** 8-bit raw */
#define NVCSI_DATATYPE_RAW8 MK_U32(42)
/** 10-bit raw */
#define NVCSI_DATATYPE_RAW10 MK_U32(43)
/** 12-bit raw */
#define NVCSI_DATATYPE_RAW12 MK_U32(44)
/** 14-bit raw */
#define NVCSI_DATATYPE_RAW14 MK_U32(45)
/** 16-bit raw */
#define NVCSI_DATATYPE_RAW16 MK_U32(46)
/** 20-bit raw */
#define NVCSI_DATATYPE_RAW20 MK_U32(47)
/** 32-bit raw */
#define NVCSI_DATATYPE_RAW32 MK_U32(63)
/** User defined datatype UED U1 */
#define NVCSI_DATATYPE_USER_1 MK_U32(48)
/** User defined datatype UED U2 */
#define NVCSI_DATATYPE_USER_2 MK_U32(49)
/** User defined datatype UED U3 */
#define NVCSI_DATATYPE_USER_3 MK_U32(50)
/** User defined datatype UED U4 */
#define NVCSI_DATATYPE_USER_4 MK_U32(51)
/** User defined datatype UED R1 (reserved) */
#define NVCSI_DATATYPE_USER_5 MK_U32(52)
/** User defined datatype UED R2 (reserved) */
#define NVCSI_DATATYPE_USER_6 MK_U32(53)
/** User defined datatype UED R3 (reserved) */
#define NVCSI_DATATYPE_USER_7 MK_U32(54)
/** User defined datatype UED R4 (reserved) */
#define NVCSI_DATATYPE_USER_8 MK_U32(55)
/** Unknown datatype */
#define NVCSI_DATATYPE_UNKNOWN MK_U32(64)
/** @} */
/* DEPRECATED - to be removed */
/** T210 (also exists in T186) */
#define NVCSI_PATTERN_GENERATOR_T210 MK_U32(1)
/** T186 only */
#define NVCSI_PATTERN_GENERATOR_T186 MK_U32(2)
/** T194 only */
#define NVCSI_PATTERN_GENERATOR_T194 MK_U32(3)
/* DEPRECATED - to be removed */
#define NVCSI_DATA_TYPE_Unspecified MK_U32(0)
#define NVCSI_DATA_TYPE_YUV420_8 MK_U32(24)
#define NVCSI_DATA_TYPE_YUV420_10 MK_U32(25)
#define NVCSI_DATA_TYPE_LEG_YUV420_8 MK_U32(26)
#define NVCSI_DATA_TYPE_YUV420CSPS_8 MK_U32(28)
#define NVCSI_DATA_TYPE_YUV420CSPS_10 MK_U32(29)
#define NVCSI_DATA_TYPE_YUV422_8 MK_U32(30)
#define NVCSI_DATA_TYPE_YUV422_10 MK_U32(31)
#define NVCSI_DATA_TYPE_RGB444 MK_U32(32)
#define NVCSI_DATA_TYPE_RGB555 MK_U32(33)
#define NVCSI_DATA_TYPE_RGB565 MK_U32(34)
#define NVCSI_DATA_TYPE_RGB666 MK_U32(35)
#define NVCSI_DATA_TYPE_RGB888 MK_U32(36)
#define NVCSI_DATA_TYPE_RAW6 MK_U32(40)
#define NVCSI_DATA_TYPE_RAW7 MK_U32(41)
#define NVCSI_DATA_TYPE_RAW8 MK_U32(42)
#define NVCSI_DATA_TYPE_RAW10 MK_U32(43)
#define NVCSI_DATA_TYPE_RAW12 MK_U32(44)
#define NVCSI_DATA_TYPE_RAW14 MK_U32(45)
#define NVCSI_DATA_TYPE_RAW16 MK_U32(46)
#define NVCSI_DATA_TYPE_RAW20 MK_U32(47)
#define NVCSI_DATA_TYPE_Unknown MK_U32(64)
/**
* @defgroup NvCsiDpcmRatio NVCSI DPCM ratio
* @{
*/
/** Bypass DPCM decompression */
#define NVCSI_DPCM_RATIO_BYPASS MK_U32(0)
/** DPCM ratio 10-8-10 */
#define NVCSI_DPCM_RATIO_10_8_10 MK_U32(1)
/** DPCM ratio 10-7-10 */
#define NVCSI_DPCM_RATIO_10_7_10 MK_U32(2)
/** DPCM ratio 10-7-10 */
#define NVCSI_DPCM_RATIO_10_6_10 MK_U32(3)
/** DPCM ratio 12-8-12 */
#define NVCSI_DPCM_RATIO_12_8_12 MK_U32(4)
/** DPCM ratio 12-7-12 */
#define NVCSI_DPCM_RATIO_12_7_12 MK_U32(5)
/** DPCM ratio 12-6-12 */
#define NVCSI_DPCM_RATIO_12_6_12 MK_U32(6)
/** DPCM ratio 14-10-14 */
#define NVCSI_DPCM_RATIO_14_10_14 MK_U32(7)
/** DPCM ratio 14-8-14 */
#define NVCSI_DPCM_RATIO_14_8_14 MK_U32(8)
/** DPCM ratio 12-10-12 */
#define NVCSI_DPCM_RATIO_12_10_12 MK_U32(9)
/**@}*/
/**
* @defgroup NvCsiParamType NvCSI Parameter Type
* @{
*/
/** Unspecified parameter set */
#define NVCSI_PARAM_TYPE_UNSPECIFIED MK_U32(0)
/**
* DPCM parameter set is present in
* @ref CAPTURE_CSI_STREAM_SET_PARAM_REQ_MSG::dpcm_config.
* (non-safety).
*/
#define NVCSI_PARAM_TYPE_DPCM MK_U32(1)
/**
* Watchdog timeout parameter set is present in
* @ref CAPTURE_CSI_STREAM_SET_PARAM_REQ_MSG::watchdog_config.
*/
#define NVCSI_PARAM_TYPE_WATCHDOG MK_U32(2)
/**@}*/
struct nvcsi_dpcm_config {
/** @ref NvCsiDpcmRatio "NVCSI DPCM ratio" */
uint32_t dpcm_ratio;
/** Reserved */
uint32_t pad32__;
} CAPTURE_IVC_ALIGN;
/**
* @brief NvCSI watchdog configuration
*/
struct nvcsi_watchdog_config {
/** Enable/disable the pixel parser watchdog */
uint8_t enable;
/** Reserved */
uint8_t pad8__[3];
/** Pixel line timeout period in LP clock cycles [0, 0x7FFFFFFF]. */
uint32_t period;
} CAPTURE_IVC_ALIGN;
/**
* NVCSI - TPG attributes
*/
/**
* @brief Number of vertical color bars in TPG (t186)
*/
#define NVCSI_TPG_NUM_COLOR_BARS MK_U32(8)
/**
* @brief NvCSI test pattern generator (TPG) configuration for T186
*/
struct nvcsi_tpg_config_t186 {
/** NvCSI stream number */
uint8_t stream_id;
/** DEPRECATED - to be removed */
uint8_t stream;
/** NvCSI virtual channel ID */
uint8_t virtual_channel_id;
/** DEPRECATED - to be removed */
uint8_t virtual_channel;
/** Initial frame number */
uint16_t initial_frame_number;
/** Reserved */
uint16_t pad16__;
/** Enable frame number generation */
uint32_t enable_frame_counter;
/** NvCSI datatype */
uint32_t datatype;
/** DEPRECATED - to be removed */
uint32_t data_type;
/** Width of the generated test image */
uint16_t image_width;
/** Height of the generated test image */
uint16_t image_height;
/** Pixel value for each horizontal color bar (format according to DT) */
uint32_t pixel_values[NVCSI_TPG_NUM_COLOR_BARS];
} CAPTURE_IVC_ALIGN;
/**
* @brief NvCsiTpgFlag Test pattern generator (TPG) flags for t194, tpg-ng
* (Non-Safety)
* @{
*/
#define NVCSI_TPG_FLAG_PATCH_MODE MK_U16(1)
/** Next gen TPG sine LUT mode */
#define NVCSI_TPG_FLAG_SINE_MODE MK_U16(2)
#define NVCSI_TPG_FLAG_PHASE_INCREMENT MK_U16(4)
#define NVCSI_TPG_FLAG_AUTO_STOP MK_U16(8)
/** TPG next gen feature to generate embedded data with config settings */
#define NVCSI_TPG_FLAG_EMBEDDED_PATTERN_CONFIG_INFO MK_U16(16)
/** Next gen TPG LS/LE packet generation enable flag */
#define NVCSI_TPG_FLAG_ENABLE_LS_LE MK_U16(32)
/** TPG next gen feature to transmit CPHY packets. DPHY is default option */
#define NVCSI_TPG_FLAG_PHY_MODE_CPHY MK_U16(64)
/* Enable CRC check.
* If this flag is set, NVCSI will do CRC check for CPHY packet
* headers and ECC check for DPHY packet headers.
* TPG doesn't support ECC generation for DPHY, so enabling this
* flag together with DPHY can be used to trigger NVCSI errors.
*/
#define NVCSI_TPG_FLAG_ENABLE_HEADER_CRC_ECC_CHECK MK_U16(128)
/* Enable CRC/ECC override.
* If this flag is set, NVCSI will use override registers instead of
* of packet headers/payload CRC fields.
*/
#define NVCSI_TPG_FLAG_ENABLE_CRC_ECC_OVERRIDE MK_U16(256)
/* Force VI error forwarding.
* VI error forwarding is disabled by default for DPHY mode,
* because CRC are not generated in this mode.
* Forcing VI error forwarding allow to trigger PD CRC error for
* tests.
*/
#define NVCSI_TPG_FLAG_FORCE_NVCSI2VI_ERROR_FORWARDING MK_U16(512)
/** @} */
/**
* @brief NvCSI test pattern generator (TPG) configuration for T194
*/
struct nvcsi_tpg_config_t194 {
/** NvCSI Virtual channel ID */
uint8_t virtual_channel_id;
/** NvCSI datatype */
uint8_t datatype;
/** @ref NvCsiTpgFlag "NvCSI TPG flag" */
uint16_t flags;
/** Starting framen number for TPG */
uint16_t initial_frame_number;
/** Maximum number for frames to be generated by TPG */
uint16_t maximum_frame_number;
/** Width of the generated frame in pixels */
uint16_t image_width;
/** Height of the generated frame in pixels */
uint16_t image_height;
/** Embedded data line width in bytes */
uint32_t embedded_line_width;
/** Line count of the embedded data before the pixel frame. */
uint32_t embedded_lines_top;
/** Line count of the embedded data after the pixel frame. */
uint32_t embedded_lines_bottom;
/* The lane count for the VC. */
uint32_t lane_count;
/** Initial phase */
uint32_t initial_phase;
/** Initial horizontal frequency for red channel */
uint32_t red_horizontal_init_freq;
/** Initial vertical frequency for red channel */
uint32_t red_vertical_init_freq;
/** Rate of change of the horizontal frequency for red channel */
uint32_t red_horizontal_freq_rate;
/** Rate of change of the vertical frequency for red channel */
uint32_t red_vertical_freq_rate;
/** Initial horizontal frequency for green channel */
uint32_t green_horizontal_init_freq;
/** Initial vertical frequency for green channel */
uint32_t green_vertical_init_freq;
/** Rate of change of the horizontal frequency for green channel */
uint32_t green_horizontal_freq_rate;
/** Rate of change of the vertical frequency for green channel */
uint32_t green_vertical_freq_rate;
/** Initial horizontal frequency for blue channel */
uint32_t blue_horizontal_init_freq;
/** Initial vertical frequency for blue channel */
uint32_t blue_vertical_init_freq;
/** Rate of change of the horizontal frequency for blue channel */
uint32_t blue_horizontal_freq_rate;
/** Rate of change of the vertical frequency for blue channel */
uint32_t blue_vertical_freq_rate;
} CAPTURE_IVC_ALIGN;
/**
* @brief next gen NvCSI test pattern generator (TPG) configuration.
*/
struct nvcsi_tpg_config_tpg_ng {
/** NvCSI Virtual channel ID */
uint8_t virtual_channel_id;
/** NvCSI datatype */
uint8_t datatype;
/** @ref NvCsiTpgFlag "NvCSI TPG flag" */
uint16_t flags;
/** Starting framen number for TPG */
uint16_t initial_frame_number;
/** Maximum number for frames to be generated by TPG */
uint16_t maximum_frame_number;
/** Width of the generated frame in pixels */
uint16_t image_width;
/** Height of the generated frame in pixels */
uint16_t image_height;
/** Embedded data line width in bytes */
uint32_t embedded_line_width;
/** Line count of the embedded data before the pixel frame. */
uint32_t embedded_lines_top;
/** Line count of the embedded data after the pixel frame. */
uint32_t embedded_lines_bottom;
/** Initial phase */
uint32_t initial_phase_red;
/** Initial phase */
uint32_t initial_phase_green;
/** Initial phase */
uint32_t initial_phase_blue;
/** Initial horizontal frequency for red channel */
uint32_t red_horizontal_init_freq;
/** Initial vertical frequency for red channel */
uint32_t red_vertical_init_freq;
/** Rate of change of the horizontal frequency for red channel */
uint32_t red_horizontal_freq_rate;
/** Rate of change of the vertical frequency for red channel */
uint32_t red_vertical_freq_rate;
/** Initial horizontal frequency for green channel */
uint32_t green_horizontal_init_freq;
/** Initial vertical frequency for green channel */
uint32_t green_vertical_init_freq;
/** Rate of change of the horizontal frequency for green channel */
uint32_t green_horizontal_freq_rate;
/** Rate of change of the vertical frequency for green channel */
uint32_t green_vertical_freq_rate;
/** Initial horizontal frequency for blue channel */
uint32_t blue_horizontal_init_freq;
/** Initial vertical frequency for blue channel */
uint32_t blue_vertical_init_freq;
/** Rate of change of the horizontal frequency for blue channel */
uint32_t blue_horizontal_freq_rate;
/** Rate of change of the vertical frequency for blue channel */
uint32_t blue_vertical_freq_rate;
/** NvCSI stream number */
uint8_t stream_id;
/** NvCSI tpg embedded data spare0 reg settings */
uint8_t emb_data_spare_0;
/** NvCSI tpg embedded data spare1 reg settings */
uint8_t emb_data_spare_1;
/** NvCSI TPG output brightness gain */
uint8_t brightness_gain_ratio;
/** Fields below are used if NVCSI_TPG_FLAG_ENABLE_CRC_ECC_OVERRIDE flag is set.
* Format of packet header fields override_crc_ph_*:
* bits 0..15 - first header
* bits 31..16 - second header */
/** This field is for the CPHY SOF packet first and second packet header CRC override */
uint32_t override_crc_ph_sof;
/** This field is for the CPHY EOF packet first and second packet header CRC override */
uint32_t override_crc_ph_eof;
/** This field is for the CPHY SOL packet first and second packet header CRC override */
uint32_t override_crc_ph_sol;
/** This field is for the CPHY EOL packet first and second packet header CRC override */
uint32_t override_crc_ph_eol;
/** This field is for the CPHY long packet packet first and second packet header CRC override */
uint32_t override_crc_ph_long_packet;
/** This field is for the long packet payload CRC override (both CPHY and DPHY) */
uint32_t override_crc_payload;
/** The TPG will not generate ECC for a packet. When using the TPG,
* SW should set the PP to skip the ecc check. To verify the ecc logic for safety BIST,
* SW can write a pre-calculated ECC for the TPG, when use with this mode,
* the TPG should generate a grescale pattern.
* 5:0 SOF_ECC This field is for the SOF short packet ECC.
* 11:6 EOF_ECC This field is for the EOF short packet ECC.
* 17:12 SOL_ECC This field is for the SOL short packet ECC.
* 23:18 EOL_ECC This field is for the EOL short packet ECC.
* 29:24 LINE_ECC This field is for the long packet header ECC.
*/
uint32_t override_ecc_ph;
/** Reserved size */
uint32_t reserved;
} CAPTURE_IVC_ALIGN;
/**
* @brief Commong NvCSI test pattern generator (TPG) configuration
*/
union nvcsi_tpg_config {
/** TPG configuration for T186 */
struct nvcsi_tpg_config_t186 t186;
/** TPG configuration for T194 */
struct nvcsi_tpg_config_t194 t194;
/** Next gen TPG configuration*/
struct nvcsi_tpg_config_tpg_ng tpg_ng;
/** Reserved size */
uint32_t reserved[32];
};
/**
* @brief TPG rate configuration, low level parameters
*/
struct nvcsi_tpg_rate_config {
/** Horizontal blanking (clocks) */
uint32_t hblank;
/** Vertical blanking (clocks) */
uint32_t vblank;
/** T194 only: Interval between pixels (clocks) */
uint32_t pixel_interval;
/** next gen TPG only: data speed */
uint32_t lane_speed;
} CAPTURE_IVC_ALIGN;
/**
* ISP capture settings
*/
/**
* @defgroup IspErrorMask ISP extended error status
*/
/** @{ */
#define CAPTURE_ISP_CHANNEL_ERROR_DMA_PBUF_ERR MK_BIT32(0)
#define CAPTURE_ISP_CHANNEL_ERROR_DMA_SBUF_ERR MK_BIT32(1)
#define CAPTURE_ISP_CHANNEL_ERROR_DMA_SEQ_ERR MK_BIT32(2)
#define CAPTURE_ISP_CHANNEL_ERROR_FRAMEID_ERR MK_BIT32(3)
#define CAPTURE_ISP_CHANNEL_ERROR_TIMEOUT MK_BIT32(4)
#define CAPTURE_ISP_CHANNEL_ERROR_TASK_TIMEOUT MK_BIT32(5)
#define CAPTURE_ISP_CHANNEL_ERROR_ALL MK_U32(0x003F)
/** @} */
/**
* @defgroup ISPProcessChannelFlags ISP process channel specific flags
*/
/**@{*/
/** Channel reset on error. Not implemented. */
#define CAPTURE_ISP_CHANNEL_FLAG_RESET_ON_ERROR MK_U32(0x0001)
/**@}*/
/**
* @brief Describes RTCPU side resources for a ISP capture pipe-line.
*/
struct capture_channel_isp_config {
/** @deprecated Not supported. */
uint8_t channel_id;
/** Reserved */
uint8_t pad_chan__[3];
/** See ISP process channel specific @ref ISPProcessChannelFlags "flags". */
uint32_t channel_flags;
/**
* Base address of the @ref isp_capture_descriptor ring buffer.
* The size of the buffer is @ref request_queue_depth *
* @ref request_size. The value must be non-zero and a multiple
* of @ref CAPTURE_DESCRIPTOR_ALIGN_BYTES.
*/
iova_t requests;
/**
* Maximum number of ISP requests in the queue [1, 240]. Determines the
* size of the @ref isp_capture_descriptor ring buffer (@ref requests).
*/
uint32_t request_queue_depth;
/**
* Size of the buffer reserved for each ISP capture descriptor.
* Each @ref isp_capture_descriptor is followed by some empty
* space for an associated ISP push buffer2 (PB2) which will be
* filled in by RCE FW. Thus the request size must be >=
* (sizeof(@ref isp_capture_descriptor) + @ref ISP_PB2_MAX_SIZE)
* and a multiple of @ref CAPTURE_DESCRIPTOR_ALIGN_BYTES. The
* start of the PB2 part inside the buffer will be aligned at
* @ref CAPTURE_DESCRIPTOR_ALIGN_BYTES.
*/
uint32_t request_size;
/**
* Base address of ISP program descriptor ring buffer.
* The size of the buffer is @ref program_queue_depth *
* @ref program_size. The value must be non-zero and a multiple
* of @ref CAPTURE_DESCRIPTOR_ALIGN_BYTES.
*/
iova_t programs;
/**
* Maximum number of ISP program requests in the program queue [1, 32].
* Determines the size of the ISP program ring buffer (@ref programs).
*/
uint32_t program_queue_depth;
/**
* Size of the buffer reserved for each ISP program descriptor.
* Thus the ISP program size must be >= sizeof(@ref isp5_program_entry)
* and a multiple of @ref CAPTURE_DESCRIPTOR_ALIGN_BYTES.
*/
uint32_t program_size;
/**
* ISP progress syncpoint information. The progress syncpoint
* is incremented whenever a slice of pixel data has been written
* to memory and once more when the status of the ISP task has
* been written to memory. The same progress syncpoint will keep
* incrementing for every consecutive capture request.
*
* @ref syncpoint_info::threshold must be set to the initial
* value of the hardware syncpoint on channel setup.
**/
struct syncpoint_info progress_sp;
/**
* ISP statistics syncpoint information. The statistics syncpoint
* is incremented once for every set of statistics specifed in
* @ref isp_progam::stats_aidx_flag. The same stats syncpoint will
* keep incrementing for every consecutive ISP request.
*
* @ref syncpoint_info::threshold must be set to the initial
* value of the hardware syncpoint on channel setup.
**/
struct syncpoint_info stats_progress_sp;
/**
* Base address of a memory mapped ring buffer containing ISP request
* buffer memory information. The size of the buffer is @ref
* request_queue_depth * @ref request_memoryinfo_size. The value must
* be non-zero and a multiple of @ref CAPTURE_DESCRIPTOR_ALIGN_BYTES.
*/
iova_t requests_memoryinfo;
/**
* Base address of a memory mapped ring buffer containing ISP program
* push buffer memory surfaces. The size of the ring buffer is @ref
* program_queue_depth * @ref program_memoryinfo_size. The value must
* be non-zero and a multiple of @ref CAPTURE_DESCRIPTOR_ALIGN_BYTES.
*/
iova_t programs_memoryinfo;
/**
* Size of the memoryinfo buffer reserved for each ISP request.
* Must be >= sizeof(@ref isp_capture_descriptor_memoryinfo) and
* a multiple of @ref CAPTURE_DESCRIPTOR_ALIGN_BYTES.
*/
uint32_t request_memoryinfo_size;
/**
* Size of the memoryinfo buffer reserved for each ISP program push
* buffer surface. Must be >= sizeof(@ref memoryinfo_surface) and
* a multiple of @ref CAPTURE_DESCRIPTOR_ALIGN_BYTES.
*/
uint32_t program_memoryinfo_size;
/** ISP unit ID. See @ref ISPUnitIds "ISP Unit Identifiers". */
uint32_t isp_unit_id;
#define HAVE_ISP_GOS_TABLES
/**
* Number of elements in @ref isp_gos_tables array
* [0, @ref ISP_NUM_GOS_TABLES]. (non-safety)
*
* @deprecated This field may be removed in the future.
*/
uint32_t num_isp_gos_tables;
/**
* Array of IOVA pointers to ISP Grid-of-Semaphores (GoS) tables.
* (non-safety)
*
* GoS table configuration, if present, must be the same on all
* active channels. The IOVA addresses must be a multiple of 256.
*
* @deprecated This field may be removed in the future.
*/
iova_t isp_gos_tables[ISP_NUM_GOS_TABLES];
} CAPTURE_IVC_ALIGN;
/**
* @defgroup CapIspEngineStatus ISP engine status bits
* @{
*/
/**
* This is asserted whenever the ISP MSR engine encounters an opcode that it
* does not recognize. This will essentially mean that the pushbuffer content
* could be corrupted.
*/
#define CAPTURE_ISP_ENGINE_STATUS_ORB_OPCODE_ERR MK_BIT32(0)
/**
* This error is triggered during the state restore operation, when the
* ISP MSR DMA detects that the incoming word-count is greater than what
* is programmed as DMA size for that client or the incoming word-count
* value is zero.
*/
#define CAPTURE_ISP_ENGINE_STATUS_SPB_WORDCOUNT_ERR MK_BIT32(1)
/**
* An illegal state transition occurred on one of the client-MSW interfaces.
*/
#define CAPTURE_ISP_ENGINE_STATUS_MSW_SEQUENCING_ERR MK_BIT32(2)
/**
* Frame ID or stream ID mismatch in the the client-MSW interface
* (see @ref isp_capture_descriptor::mr_image_def1).
*/
#define CAPTURE_ISP_ENGINE_STATUS_MSW_INCORRECT_MSW_ID MK_BIT32(3)
/**
* ISP task timeout. ISP task has failed to finish in time, indicating
* that the engine may have ended up in a bad state. The task has been
* aborted and the engine has been reset.
*/
#define CAPTURE_ISP_ENGINE_STATUS_TASK_TIMEOUT MK_BIT32(20)
/** @} */
/** @brief Engine status record written by ISP */
struct capture_isp_engine_status {
/**
* TSC based timestamp in nanoseconds, representing the time at which
* the engine status was written.
*/
uint64_t timestamp;
/** @ref CapIspEngineStatus "ISP engine status bits". */
uint32_t status_engine;
/** The subframe that this status notifier was written with respect to */
/** Number of subframes processed. */
uint16_t subframe;
/**
* Task status (0 = success, 1 = failure).
*/
uint16_t status_task;
};
/**
* @defgroup IspRequestStatus ISP request status codes
*/
/** @{ */
/** ISP request status unknown */
#define CAPTURE_ISP_STATUS_UNKNOWN MK_U32(0)
/** ISP request succeeded */
#define CAPTURE_ISP_STATUS_SUCCESS MK_U32(1)
/** ISP request encountered an error */
#define CAPTURE_ISP_STATUS_ERROR MK_U32(2)
/** @} */
/**
* @brief ISP process request status
*/
struct capture_isp_status {
/**
* ISP physical channel id.
*
* @deprecated This field may be removed in the future.
*/
uint8_t chan_id;
/** Reserved */
uint8_t pad__;
/**
* Frame sequence number. Contains the low 16 bits from
* @ref isp_capture_descriptor::sequence.
*
* @deprecated This field may be removed in the future.
*/
uint16_t frame_id;
/** @ref IspRequestStatus "ISP request status code" */
uint32_t status;
/** @ref IspErrorMask "ISP extended error status". */
uint32_t error_mask;
/** Reserved */
uint32_t pad2__;
} CAPTURE_IVC_ALIGN;
/**
* @defgroup IspProgramStatus ISP program status codes
*/
/** @{ */
/** ISP program status unknown */
#define CAPTURE_ISP_PROGRAM_STATUS_UNKNOWN MK_U32(0)
/** ISP program was used successfully for frame processing */
#define CAPTURE_ISP_PROGRAM_STATUS_SUCCESS MK_U32(1)
/** ISP program encountered an error */
#define CAPTURE_ISP_PROGRAM_STATUS_ERROR MK_U32(2)
/** ISP program has expired and is not referenced by any active ISP requests */
#define CAPTURE_ISP_PROGRAM_STATUS_STALE MK_U32(3)
/** @} */
/**
* @brief ISP program request status
*/
struct capture_isp_program_status {
/**
* ISP physical channel id.
*
* @deprecated This field may be removed in the future.
*/
uint8_t chan_id;
/**
* The @a settings_id uniquely identifies the ISP program.
* The ID is assigned by application and copied here from
* the @ref isp_program_descriptor structure.
*/
uint8_t settings_id;
/** Reserved */
uint16_t pad_id__;
/** @ref IspProgramStatus "Program status" */
uint32_t status;
/**
* @ref IspErrorMask "ISP extended error status" from the last
* ISP request to use this ISP program.
*/
uint32_t error_mask;
/** Reserved */
uint32_t pad2__;
} CAPTURE_IVC_ALIGN;
/**
* @defgroup IspActivateFlag ISP program activation flag
*/
/** @{ */
/**
* ISP program will be activated when the
* @ref isp_capture_descriptor::sequence "sequence number"
* of a submitted ISP request meets the
* @ref isp_program_descriptor::sequence "sequence threshold"
* of the ISP program.
*/
#define CAPTURE_ACTIVATE_FLAG_ON_SEQUENCE_ID MK_U32(0x1)
/**
* Program request will be activate when the frame settings id reaches
* a certain threshold.
*/
#define CAPTURE_ACTIVATE_FLAG_ON_SETTINGS_ID MK_U32(0x2)
/** Each ISP request is coupled with an ISP program request. */
#define CAPTURE_ACTIVATE_FLAG_COUPLED MK_U32(0x4)
/** @} */
/**
* @brief ISP program descriptor
*/
struct isp_program_descriptor {
/**
* ISP settings_id which uniquely identifies isp_program [0,255].
* Assigned by application. The settings_id is reflected back
* in @ref capture_isp_program_status::settings_id.
*
* @deprecated This field may be removed in the future.
*/
uint8_t settings_id;
/**
* VI channel ID associated with this ISP program. Frames produced
* by the VI channel will be processed using this ISP program when
* the ISP program is active.
*
* In case of memory-to-memory processing, this should be set to
* the value @ref CAPTURE_NO_VI_ISP_BINDING.
*
* @note Valid VI channel IDs are currently guaranteed to be
* in the range [0,254] even though the capture channel ID
* is defined as a 32-bit value elsewhere.
*/
uint8_t vi_channel_id;
/** Indicates that ISP program is not bound to a specific VI channel. */
#define CAPTURE_NO_VI_ISP_BINDING MK_U8(0xFF)
/** Reserved */
uint8_t pad_sid__[2];
/**
* Sequence number trigger for the ISP program. The ISP program is
* activated when the first @ref CAPTURE_ISP_REQUEST_REQ "ISP request"
* with an equal or higher @ref isp_capture_descriptor "sequence number"
* is submitted to ISP for processing. A previously active ISP program
* with a lower sequence number will automatically expire when all
* active ISP requests using it have finished.
*
* @note sequence number comparisons are done with 2^32 modulo
* arithmetics, allowing the sequence number to wrap.
*/
uint32_t sequence;
/**
* Offset to the base of an @ref isp5_program "ISP program" buffer.
* The IOVA address of the ISP program is calculated by adding the
* @a isp_program_offset to the base IOVA address of this
* @ref isp_capture_descriptor. The resulting address must be a multiple
* of @ref CAPTURE_DESCRIPTOR_ALIGN.
*/
uint32_t isp_program_offset;
/**
* Size of isp program structure. Must be >= sizeof(@ref isp5_program)
* and a multiple of @ref CAPTURE_DESCRIPTOR_ALIGN.
*/
uint32_t isp_program_size;
/**
* Base address of memory mapped ISP PB1 containing isp HW settings.
* This has to be 64 bytes aligned
*/
iova_t isp_pb1_mem;
/** ISP program request status written by RCE */
struct capture_isp_program_status isp_program_status;
/** Unique ID for ISP stats buffer */
uint64_t isp_stats_buffer_id;
/** Unique ID for ISP program buffer */
uint64_t isp_program_buffer_id;
/** Activation condition for given ISP program. See @ref IspActivateFlag "Activation flags" */
uint32_t activate_flags;
/** Pad to aligned size */
uint8_t pad__[4];
} CAPTURE_DESCRIPTOR_ALIGN;
/**
* @brief ISP program size (ATOM aligned).
*
* NvCapture UMD makes sure to place isp_program just after above program
* descriptor buffer for each request, so that KMD and RCE can co-locate
* isp_program and it's corresponding program descriptor in memory.
*/
#define ISP_PROGRAM_MAX_SIZE 16512
/**
* @defgroup IspPixFmt ISP Pixel Formats
*/
/**@{*/
/** NvColorFormat_L8 */
#define ISP_MW_FORMAT_T_L8 MK_U8(4)
/** NvColorFormat_A8B8G8R8 */
#define ISP_MW_FORMAT_T_A8B8G8R8 MK_U8(8)
/** NvColorFormat_A8R8G8B8 */
#define ISP_MW_FORMAT_T_A8R8G8B8 MK_U8(9)
/** NvColorFormat_B8G8R8A8 */
#define ISP_MW_FORMAT_T_B8G8R8A8 MK_U8(10)
/** NvColorFormat_R8G8B8A8 */
#define ISP_MW_FORMAT_T_R8G8B8A8 MK_U8(11)
/** NvColorFormat_A8Y8U8V8 */
#define ISP_MW_FORMAT_T_A8Y8U8V8 MK_U8(13)
/** NvColorFormat_V8U8Y8A8 */
#define ISP_MW_FORMAT_T_V8U8Y8A8 MK_U8(14)
/** NvColorFormat_Y8_U8__Y8_V8 or NvColorFormat_YUYV */
#define ISP_MW_FORMAT_T_Y8_U8__Y8_V8 MK_U8(16)
/** NvColorFormat_Y8_V8__Y8_U8 or NvColorFormat_YVYU */
#define ISP_MW_FORMAT_T_Y8_V8__Y8_U8 MK_U8(17)
/** NvColorFormat_V8_Y8__U8_Y8 or NvColorFormat_VYUY */
#define ISP_MW_FORMAT_T_V8_Y8__U8_Y8 MK_U8(18)
/** NvColorFormat_U8_Y8__V8_Y8 or NvColorFormat_UYVY */
#define ISP_MW_FORMAT_T_U8_Y8__V8_Y8 MK_U8(19)
/** YUV444 semi-planar: Y8,U8V8 */
#define ISP_MW_FORMAT_T_Y8___U8V8_N444 MK_U8(32)
/** YUV444 semi-planar: Y8,V8U8 */
#define ISP_MW_FORMAT_T_Y8___V8U8_N444 MK_U8(33)
/** NV21 format (YUV420 semi-planar: Y8,U8V8) */
#define ISP_MW_FORMAT_T_Y8___U8V8_N420 MK_U8(34)
/** NV12 format (YUV420 semi-planar: Y8,V8U8) */
#define ISP_MW_FORMAT_T_Y8___V8U8_N420 MK_U8(35)
/** YUV420 semi-planar: Y16,U8V8 */
#define ISP_MW_FORMAT_T_Y16I___U8V8_N420 MK_U8(38)
/** YUV420 semi-planar: Y16,V8U8 */
#define ISP_MW_FORMAT_T_Y16I___V8U8_N420 MK_U8(39)
/** YUV420 semi-planar: Y16,U8V8 */
#define ISP_MW_FORMAT_T_Y16F___U8V8_N420 MK_U8(40)
/** YUV420 semi-planar: Y16,V8U8 */
#define ISP_MW_FORMAT_T_Y16F___V8U8_N420 MK_U8(41)
/** NvColorFormat_A2B10G10R10 */
#define ISP_MW_FORMAT_T_A2B10G10R10 MK_U8(68)
/** NvColorFormat_A2R10G10B10 */
#define ISP_MW_FORMAT_T_A2R10G10B10 MK_U8(69)
/** NvColorFormat_B10G10R10A2 */
#define ISP_MW_FORMAT_T_B10G10R10A2 MK_U8(70)
/** NvColorFormat_R10G10B10A2 */
#define ISP_MW_FORMAT_T_R10G10B10A2 MK_U8(71)
/** NvColorFormat_A2Y10U10V10 */
#define ISP_MW_FORMAT_T_A2Y10U10V10 MK_U8(73)
/** NvColorFormat_V10U10Y10A2 */
#define ISP_MW_FORMAT_T_V10U10Y10A2 MK_U8(74)
/** NvColorFormat_L16 */
#define ISP_MW_FORMAT_T_L16 MK_U8(186)
/** NvColorFormat_Float_L16 */
#define ISP_MW_FORMAT_T_L16_F MK_U8(188)
/** NvColorFormat_Int_L16 */
#define ISP_MW_FORMAT_T_L16_I MK_U8(190)
/** NvColorFormat_R16 */
#define ISP_MW_FORMAT_T_R16 MK_U8(192)
/** RAW ISP encoded float, 20-bit fixed */
#define ISP_MW_FORMAT_T_R16_X_ISP20 MK_U8(194)
/** NvColorFormat_Float_R16 */
#define ISP_MW_FORMAT_T_R16_F MK_U8(195)
/** NvColorFormat_Int_R16 */
#define ISP_MW_FORMAT_T_R16_I MK_U8(197)
/** NvColorFormat_R32 */
#define ISP_MW_FORMAT_T_R32 MK_U8(230)
/** NvColorFormat_Float_R32 */
#define ISP_MW_FORMAT_T_R32_F MK_U8(232)
/** NvColorFormat_Int_R32 */
#define ISP_MW_FORMAT_T_R32_I MK_U8(233)
/** NvColorFormat_L32 */
#define ISP_MW_FORMAT_T_L32 MK_U8(236)
/** NvColorFormat_Float_L32 */
#define ISP_MW_FORMAT_T_L32_F MK_U8(238)
/** NvColorFormat_Int_L32 */
#define ISP_MW_FORMAT_T_L32_I MK_U8(239)
/** NvColorFormat_R24 */
#define ISP_MW_FORMAT_T_R24 MK_U8(240)
/** NvColorFormat_R16_X_ISP24 (RAW ISP encoded float, 24-bit fixed) */
#define ISP_MW_FORMAT_T_R16_X_ISP24 MK_U8(241)
/** NvColorFormat_X16B16G16R16 */
#define ISP_MW_FORMAT_T_X16B16G16R16 MK_U8(203)
/** NvColorFormat_Int_X16B16G16R16 */
#define ISP_MW_FORMAT_T_X16B16G16R16_I MK_U8(198)
/** NvColorFormat_Float_X16B16G16R16 */
#define ISP_MW_FORMAT_T_X16B16G16R16_F MK_U8(212)
/** A16Y16U16V16 (ISP encoded float, 20-bit fixed) */
#define ISP_MW_FORMAT_T_A16Y16U16V16_X_ISP20 MK_U8(200)
/** NvColorFormat_Int_A16Y16U16V16 */
#define ISP_MW_FORMAT_T_A16Y16U16V16_I MK_U8(201)
/** NvColorFormat_Int_V16U16Y16A16 */
#define ISP_MW_FORMAT_T_V16U16Y16A16_I MK_U8(202)
/** NvColorFormat_Uint_A16Y16U16V16 */
#define ISP_MW_FORMAT_T_A16Y16U16V16 MK_U8(204)
/** NvColorFormat_Uint_V16U16Y16A16 */
#define ISP_MW_FORMAT_T_V16U16Y16A16 MK_U8(205)
/** A16B16G16R16 (ISP encoded float, 20-bit fixed) */
#define ISP_MW_FORMAT_T_A16B16G16R16_X_ISP20 MK_U8(210)
/** NvColorFormat_Float_A16B16G16R16 */
#define ISP_MW_FORMAT_T_A16B16G16R16_F MK_U8(211)
/** NvColorFormat_Float_A16Y16U16V16 */
#define ISP_MW_FORMAT_T_A16Y16U16V16_F MK_U8(216)
/** YUV444 semi-planar: Y16,V16U16 */
#define ISP_MW_FORMAT_T_Y16___V16U16_N444 MK_U8(224)
/** YUV444 semi-planar: Y16,U16V16 */
#define ISP_MW_FORMAT_T_Y16___U16V16_N444 MK_U8(225)
/** NV12 format (YUV420 semi-planar: Y16,V16U16) */
#define ISP_MW_FORMAT_T_Y16___V16U16_N420 MK_U8(226)
/** NV21 format (YUV420 semi-planar: Y16,U16V16) */
#define ISP_MW_FORMAT_T_Y16___U16V16_N420 MK_U8(227)
/** NvColorFormat_Float_A32B32G32R32 */
#define ISP_MW_FORMAT_T_A32B32G32R32_F MK_U8(248)
/** NvColorFormat_Float_A32Y32U32V32 */
#define ISP_MW_FORMAT_T_A32Y32U32V32_F MK_U8(250)
/**@}*/
/**
* @brief ISP image surface info
*/
struct image_surface {
/**
* Undefined in RCE-FW interface.
*
* In the UMD-KMD shared memory interface this carries
* an offset into the memory buffer identified by
* a memory handle stored in @ref offset_hi. Must be
* a multiple of 64.
*/
uint32_t offset;
/**
* Undefined in RCE-FW interface.
*
* In the UMD-KMD interface this carries a memory
* handle for the output buffer. See KMD documentation
* for the constraints.
*/
uint32_t offset_hi;
/**
* The surface stride in bytes [0, 0x3FFFF].
* Must be a multiple of 64.
*/
uint32_t surface_stride;
/** Reserved */
uint32_t pad_surf__;
} CAPTURE_IVC_ALIGN;
/**
* @brief Output image surface info
*/
struct stats_surface {
/**
* Undefined in RCE-FW interface.
*
* In the UMD-KMD shared memory interface this carries
* an offset into the memory buffer identified by
* a memory handle stored in @ref offset_hi. Must be
* a multiple of 64.
*/
uint32_t offset;
/**
* Undefined in RCE-FW interface.
*
* In the UMD-KMD interface this carries a memory
* handle for the output buffer. See KMD documentation
* for the constraints.
*/
uint32_t offset_hi;
} CAPTURE_IVC_ALIGN;
/**
* @brief Memory write crop region info
*/
struct isp_crop_rect {
/** Topmost line stored in memory (inclusive) relative to the MW input image */
uint16_t top;
/** Bottommost line stored in memory (inclusive) relative to the MW input image */
uint16_t bottom;
/** Leftmost pixel stored in memory (inclusive) relative to the MW input image */
uint16_t left;
/** Rightmost pixel stored in memory (inclusive) relative to the MW input image */
uint16_t right;
};
/**
* @defgroup IspProcessFlag ISP request flags.
*/
/** @{ */
/** Enable process status reporting for the channel */
#define CAPTURE_ISP_FLAG_STATUS_REPORT_ENABLE MK_BIT32(0)
/** Enable error reporting for the channel */
#define CAPTURE_ISP_FLAG_ERROR_REPORT_ENABLE MK_BIT32(1)
/** Enable process and program request binding for the channel */
#define CAPTURE_ISP_FLAG_ISP_PROGRAM_BINDING MK_BIT32(2)
/** @} */
/**
* @brief ISP capture descriptor
*/
struct isp_capture_descriptor {
/** ISP request sequence number [0, UINT32_MAX]. */
uint32_t sequence;
/**@ref IspProcessFlag "ISP request flags". */
uint32_t capture_flags;
/** 1 MR port, max 3 input surfaces. */
#define ISP_MAX_INPUT_SURFACES MK_U32(3)
/** Input image surfaces. */
struct image_surface input_mr_surfaces[ISP_MAX_INPUT_SURFACES];
/** 3 memory write ports. */
#define ISP_MAX_OUTPUTS MK_U32(3)
/** Maximum of 2 surfaces (multiplanar) per memory write port. */
#define ISP_MAX_OUTPUT_SURFACES MK_U32(2)
struct {
/** Memory write port output surfaces. */
struct image_surface surfaces[ISP_MAX_OUTPUT_SURFACES];
/**
* Image format definition for output surface.
*
* @rststar
* +-------+---------------------------------------------------+
* | Bits | Description |
* +=======+===================================================+
* | 26:24 | Height of block linear blocks as log2(GOBs) |
* | | [0, 5]. |
* +-------+---------------------------------------------------+
* | 23:16 | 0 = pich linear |
* | | 254 = block linear 16BX2 |
* +-------+---------------------------------------------------+
* | 12 | 0 = Write RED values to RED channel |
* | | 1 = Write ALPHA values to RED channel |
* +-------+---------------------------------------------------+
* | 11:10 | Initial dither value at the start of a tile [0,3] |
* +-------+---------------------------------------------------+
* | 9 | Dither mode (0=fixed, 1= diffuse) |
* +-------+---------------------------------------------------+
* | 8 | Dither enable (0=disable, 1=enable) |
* +-------+---------------------------------------------------+
* | 7:0 | ISP output pixel format. See 1) |
* +-------+---------------------------------------------------+
* @endrst
*
* 1) @ref IspPixFmt "ISP Pixel Formats". Note: the 8-bit
* YUV444 semi-planar formats are not supported on output.
*/
uint32_t image_def;
/**
* Width of the output image in pixels
* [@ref ISP5_MIN_TILE_WIDTH,
* @ref ISP5_MAX_NUM_TILES * @ref ISP5_MAX_TILE_WIDTH].
* Must be an even number.
*/
uint16_t width;
/**
* Height of the output image in pixels
* [@ref ISP5_MIN_SLICE_HEIGHT,
* @ref ISP5_MAX_NUM_SLICES * @ref ISP5_MAX_SLICE_HEIGHT].
*/
uint16_t height;
/** Unique ID for the output buffer used for watermarking */
uint64_t output_buffer_id;
} outputs_mw[ISP_MAX_OUTPUTS];
/**< Configurations for output surfaces for each memory write port. */
/** Flicker band (FB) statistics buffer. */
struct stats_surface fb_surface;
/** Focus metrics (FM) statistics buffer. */
struct stats_surface fm_surface;
/** Auto Focus Metrics (AFM) statistics buffer. */
struct stats_surface afm_surface;
/** Local Average Clipping (LAC0) unit 0 statistics buffer. */
struct stats_surface lac0_surface;
/** Local Average Clipping (LAC1) unit 1 statistics buffer. */
struct stats_surface lac1_surface;
/** Histogram (H0) unit 0 statistics buffer. */
struct stats_surface h0_surface;
/** Histogram (H1) unit 1 statistics buffer. */
struct stats_surface h1_surface;
/** Histogram (H2) unit 2 statistics buffer, for ISP7 only */
struct stats_surface h2_surface;
/** Pixel Replacement Unit (PRU) statistics buffer */
struct stats_surface pru_bad_surface;
/** RAW24 Histogram Unit statistics buffer. */
struct stats_surface hist_raw24_surface;
/** Local Tone Mapping statistics buffer. */
struct stats_surface ltm_surface;
struct {
/**
* Width of the input image in pixels
* [@ref ISP5_MIN_TILE_WIDTH,
* @ref ISP5_MAX_NUM_TILES * @ref ISP5_MAX_TILE_WIDTH].
* Must be an even number.
*/
uint16_t mr_width;
/**
* Height of the input image in pixels
* [@ref ISP5_MIN_SLICE_HEIGHT,
* @ref ISP5_MAX_NUM_SLICES * @ref ISP5_MAX_SLICE_HEIGHT].
*/
uint16_t mr_height;
/**
* Height of slices used for processing the image
* [@ref ISP5_MIN_SLICE_HEIGHT, @ref ISP5_MAX_SLICE_HEIGHT].
*/
uint16_t slice_height;
/** @deprecated Not supported. */
uint16_t chunk_width_first;
/**
* Width of the ISP tiles in the middle of a slice
* [@ref ISP5_MIN_TILE_WIDTH, @ref ISP5_MAX_TILE_WIDTH].
*/
uint16_t chunk_width_middle;
/** @deprecated Not supported. */
uint16_t chunk_overfetch_width;
/**
* Width of the leftmost ISP tile in a slice
* [@ref ISP5_MIN_TILE_WIDTH, @ref ISP5_MAX_TILE_WIDTH].
* Must be an even number.
*/
uint16_t tile_width_first;
/** @deprecated Not supported. */
uint8_t mr_image_cfa;
/** Reserved */
uint8_t pad__;
/**
* Image format definition for input surface.
*
* @rststar
* +-------+---------------------------------------------------+
* | Bits | Description |
* +=======+===================================================+
* | 29:28 | Set how pixels are formtted in internal pipeline. |
* | | Color space must match pipeline data format. |
* | | 0 = QUAD24 |
* | | 1 = QUAD |
* | | 2 = RGB |
* | | 3 = YUV |
* +-------+---------------------------------------------------+
* | 27:24 | Height of block linear blocks as log2(GOBs) |
* | | [0, 5]. |
* +-------+---------------------------------------------------+
* | 23:16 | 0 = pich linear |
* | | 254 = block linear 16BX2 (not supported) |
* +-------+---------------------------------------------------+
* | 14:12 | Sensor RAW format. |
* | | 0 = RAW8 |
* | | 1 = RAW10 |
* | | 2 = RAW12 |
* | | 3 = RAW14 |
* | | 4 = RAW16 |
* | | 5 = RAW20 |
* | | 6 = RAW24 |
* +-------+---------------------------------------------------+
* | 9:8 | Enable padding on T_R16 or T_R32 format. |
* | | 0 = Legacy mode (no padding) |
* | | 1 = Right aligned, pad MSB with 0 |
* | | 2 = Left aligned, pad LSB with 0 |
* +-------+---------------------------------------------------+
* | 7:0 | ISP input pixel format. See 1) |
* +-------+---------------------------------------------------+
* @endrst
*
* 1) @ref IspPixFmt "ISP Pixel Formats"
*/
uint32_t mr_image_def;
/**
* Frame identification. Used internally by ISP.
*
* @rststar
* +-------+---------------------------------------------------+
* | Bits | Description |
* +=======+===================================================+
* | 23:16 | Camera stream ID [0,255]. Should be set to a |
* | | unique value for each stream source. |
* +-------+---------------------------------------------------+
* | 15:0 | Frame ID [0,UINT16_MAX]. Should be set to a |
* | | unique value for each frame. |
* +-------+---------------------------------------------------+
* @endrst
*/
uint32_t mr_image_def1;
/**
* Program identification. Used internally by ISP 7.
*
* @rststar
* +-------+---------------------------------------------------+
* | Bits | Description |
* +=======+===================================================+
* | 15:0 | Program ID [0,UINT16_MAX]. Should be set to a |
* | | unique value for each push buffer. |
* +-------+---------------------------------------------------+
* @endrst
*/
uint32_t mr_image_def2;
/**
* Surface control settings for multi-exposure.
*
* @rststar
* +-------+---------------------------------------------------+
* | Bits | Description |
* +=======+===================================================+
* | 17 | Arrangement of dual-exposure components on RV/GY: |
* | | 0 = 1st exposure on RV, 2nd exposure on GY |
* | | 1 = 1st exposure on GY, 2nd exposure on RV |
* +-------+---------------------------------------------------+
* | 16 | Exposure interleave enable (0=disable, 1=enable) |
* | | Separate the pixels for PRU processing. |
* +-------+---------------------------------------------------+
* | 11:8 | Must be programmed to 1. |
* +-------+---------------------------------------------------+
* | 2:1 | Number of surfaces when reading multi-exposure |
* | | [0,3]. Not for semi-planar formats. Must be set |
* | | when exposure interleave is enabled. |
* +-------+---------------------------------------------------+
* | 0 | Enable large requests on AXI bus |
* | | (0=disable,1=enable). |
* +-------+---------------------------------------------------+
* @endrst
*/
uint32_t surf_ctrl;
/**
* Byte stride between start of lines [0,0x3FFFF]. Must be a
* multiple of 64.
*
* @deprecated Not supported from T234 onwards.
*/
uint32_t surf_stride_line;
/**
* Byte stride between start of DPCM chunks [0,UINT32_MAX].
* Must be a multiple of 64. (non-safety)
*
* @deprecated Not supported from T234 onwards.
*/
uint32_t surf_stride_chunk;
} surface_configs;
/**< Configuration for input surfaces. */
/**
* Undefined in RCE-FW interface.
*
* In the UMD-KMD shared memory interface this specifies
* the memory handle and offset for the ISP program.
*
* @rststar
* +-------+---------------------------------------------------+
* | Bits | Description |
* +=======+===================================================+
* | 63:32 | Memory handle [0,UINT32_MAX]. |
* +-------+---------------------------------------------------+
* | 31:0 | ISP program offset in the buffer [0,UINT32_MAX]. |
* +-------+---------------------------------------------------+
* @endrst
*/
iova_t isp_pb2_mem;
/** Reserved */
uint32_t pad_pb__[2];
/** Reserved. Not supported. */
uint32_t frame_timeout;
/**
* Number of inputfences for given capture request
* [0, @ref ISP_MAX_INPUT_SURFACES]. These fences are exclusively
* associated with ISP input ports and they support subframe
* sychronization with upstream. Input fences are not required
* for input ports where the data is already present in memory.
*/
uint32_t num_inputfences;
/**
* Array of input fences. Each input fence specifies a fence value for
* an upstream progress syncpoint, indicating the completion of the
* first subframe of the associated input surface. Each subsequent
* progress syncpoint increment beyond the input fence value indicates
* the completion of an additional subframe.
*/
struct syncpoint_info inputfences[ISP_MAX_INPUT_SURFACES];
/* GID-STKHLDREQPLCL123-3812735 */
/** Maximum number of prefences supported */
#define ISP_MAX_PREFENCES MK_U32(14)
/**
* Number of traditional prefences for a given capture request
* [0, @ref ISP_MAX_PREFENCES]. Prefences are generic and can
* be used for to gate the ISP processing on any pre-condition.
*/
uint32_t num_prefences;
/** Reserved */
uint32_t pad_prefences__;
/** Array of prefences. */
struct syncpoint_info prefences[ISP_MAX_PREFENCES];
/**
* Memory buffer for @ref capture_isp_engine_status
* "ISP engine status surface", written by ISP when a
* frame is complete.
*
* This is only valid in the UMD-KMD interface.
* The content is undefined in the RCE FW interface.
*/
struct engine_status_surface engine_status;
/**
* ISP request status record. Written by RCE when the ISP
* request is completed.
*/
struct capture_isp_status status;
/** Offset for the next watermark within the watermark surface */
struct watermark_mem_offset watermark_offset;
/** Unique ID for ISP input buffer */
uint64_t input_buffer_id;
/**
* Buffer index identifying an ISP program bound to this ISP request.
* Valid if flag @ref CAPTURE_ISP_FLAG_ISP_PROGRAM_BINDING is set in
* @ref capture_flags.
*/
uint32_t program_buffer_index;
/** Reserved */
uint32_t pad__[5];
} CAPTURE_DESCRIPTOR_ALIGN;
/**
* @brief ISP capture descriptor memory information
*
* ISP capture descriptor memory information shared between
* KMD and RCE only. This information cannot be part of
* capture descriptor since it is shared with usermode
* application.
*/
struct isp_capture_descriptor_memoryinfo {
/** ISP input surfaces */
struct memoryinfo_surface input_mr_surfaces[ISP_MAX_INPUT_SURFACES];
struct {
/** ISP output surfaces for memory port */
struct memoryinfo_surface surfaces[ISP_MAX_OUTPUT_SURFACES];
} outputs_mw[ISP_MAX_OUTPUTS];
/**< ISP output surfaces for each write port */
/** Flicker band (FB) statistics buffer */
struct memoryinfo_surface fb_surface;
/** Focus metrics (FM) statistics buffer */
struct memoryinfo_surface fm_surface;
/** Auto Focus Metrics (AFM) statistics buffer */
struct memoryinfo_surface afm_surface;
/** Local Average Clipping (LAC0) unit 0 statistics buffer */
struct memoryinfo_surface lac0_surface;
/** Local Average Clipping (LAC1) unit 1 statistics buffer */
struct memoryinfo_surface lac1_surface;
/** Histogram (H0) unit 0 statistics buffer */
struct memoryinfo_surface h0_surface;
/** Histogram (H1) unit 1 statistics buffer */
struct memoryinfo_surface h1_surface;
/** Histogram (H2) unit 2 statistics buffer for ISP7 only*/
struct memoryinfo_surface h2_surface;
/** Pixel Replacement Unit (PRU) statistics buffer */
struct memoryinfo_surface pru_bad_surface;
/** Local Tone Mapping statistics buffer */
struct memoryinfo_surface ltm_surface;
/** RAW24 Histogram Unit statistics buffer */
struct memoryinfo_surface hist_raw24_surface;
/** Base address of ISP PB2 memory */
struct memoryinfo_surface isp_pb2_mem;
/**
* Memory surface for @ref capture_isp_engine_status
* "ISP engine status ".
*/
struct memoryinfo_surface engine_status;
/** Memory surface for watermark ring buffer written by ISP FW */
struct memoryinfo_surface watermark_surface;
/* Reserved */
uint64_t reserved[2];
} CAPTURE_DESCRIPTOR_ALIGN;
/**
* @brief PB2 size (ATOM aligned).
*
* NvCapture UMD makes sure to place PB2 just after above capture
* descriptor buffer for each request, so that KMD and RCE can co-locate
* PB2 and it's corresponding capture descriptor in memory.
*/
#define ISP_PB2_MAX_SIZE MK_SIZE(512)
/**
* @brief Size allocated for the ISP program push buffer
*/
#define NVISP5_ISP_PROGRAM_PB_SIZE MK_SIZE(16384)
/**
* @brief Size allocated for the push buffer containing output & stats
* surface definitions. Final value TBD
*/
#define NVISP5_SURFACE_PB_SIZE MK_SIZE(512)
/**
* @Size of engine status surface used in both VI and ISP
*/
#define NV_ENGINE_STATUS_SURFACE_SIZE MK_SIZE(16)
/**
* @defgroup IspSubUnitEnables ISP sub-unit enable bits.
* @{
*/
/** Enable PRU outlier rejection */
#define ISP5BLOCK_ENABLED_PRU_OUTLIER_REJECTION MK_BIT32(0)
/** Enable PRU statistics */
#define ISP5BLOCK_ENABLED_PRU_STATS MK_BIT32(1)
/** Enable PRU HDR mode */
#define ISP5BLOCK_ENABLED_PRU_HDR MK_BIT32(2)
/** Enable IPS6 PRU RAW24 histogram */
#define ISP6BLOCK_ENABLED_PRU_RAW24_HIST MK_BIT32(3)
/** Enable AP demosaic */
#define ISP5BLOCK_ENABLED_AP_DEMOSAIC MK_BIT32(4)
/** Enable AP color artifact reduction */
#define ISP5BLOCK_ENABLED_AP_CAR MK_BIT32(5)
/** Enable AP LTM modify */
#define ISP5BLOCK_ENABLED_AP_LTM_MODIFY MK_BIT32(6)
/** Enable AP LTM stats */
#define ISP5BLOCK_ENABLED_AP_LTM_STATS MK_BIT32(7)
/** Enable AP focus metric */
#define ISP5BLOCK_ENABLED_AP_FOCUS_METRIC MK_BIT32(8)
/** Enable flickerband */
#define ISP5BLOCK_ENABLED_FLICKERBAND MK_BIT32(9)
/** Enable histogram (H0) */
#define ISP5BLOCK_ENABLED_HISTOGRAM0 MK_BIT32(10)
/** Enable histogram (H1) */
#define ISP5BLOCK_ENABLED_HISTOGRAM1 MK_BIT32(11)
/* Enable horizontal downscaling on DS0 */
#define ISP5BLOCK_ENABLED_DOWNSCALER0_HOR MK_BIT32(12)
/* Enable vertical downscaling on DS0 */
#define ISP5BLOCK_ENABLED_DOWNSCALER0_VERT MK_BIT32(13)
/* Enable horizontal downscaling on DS1 */
#define ISP5BLOCK_ENABLED_DOWNSCALER1_HOR MK_BIT32(14)
/* Enable vertical downscaling on DS1 */
#define ISP5BLOCK_ENABLED_DOWNSCALER1_VERT MK_BIT32(15)
/* Enable horizontal downscaling on DS2 */
#define ISP5BLOCK_ENABLED_DOWNSCALER2_HOR MK_BIT32(16)
/* Enable vertical downscaling on DS2 */
#define ISP5BLOCK_ENABLED_DOWNSCALER2_VERT MK_BIT32(17)
/** Enable sharpen (SHARP0) */
#define ISP5BLOCK_ENABLED_SHARPEN0 MK_BIT32(18)
/** Enable sharpen (SHARP1) */
#define ISP5BLOCK_ENABLED_SHARPEN1 MK_BIT32(19)
/** Enable LAC0 region 0 */
#define ISP5BLOCK_ENABLED_LAC0_REGION0 MK_BIT32(20)
/** Enable LAC0 region 1 */
#define ISP5BLOCK_ENABLED_LAC0_REGION1 MK_BIT32(21)
/** Enable LAC0 region 2 */
#define ISP5BLOCK_ENABLED_LAC0_REGION2 MK_BIT32(22)
/** Enable LAC0 region 3 */
#define ISP5BLOCK_ENABLED_LAC0_REGION3 MK_BIT32(23)
/** Enable LAC1 region 0 */
#define ISP5BLOCK_ENABLED_LAC1_REGION0 MK_BIT32(24)
/** Enable LAC1 region 1 */
#define ISP5BLOCK_ENABLED_LAC1_REGION1 MK_BIT32(25)
/** Enable LAC1 region 2 */
#define ISP5BLOCK_ENABLED_LAC1_REGION2 MK_BIT32(26)
/** Enable LAC1 region 3 */
#define ISP5BLOCK_ENABLED_LAC1_REGION3 MK_BIT32(27)
/** Enable ISP6 LTM Softkey automatic update feature */
#define ISP6BLOCK_ENABLED_AP_LTM_SK_UPDATE MK_BIT32(28)
/** Enable ISP7 HIST2 */
#define ISP7BLOCK_ENABLED_HISTOGRAM2 MK_BIT32(29)
/** @} */
/**
* @brief ISP overfetch requirements.
*
* ISP kernel needs access to pixels outside the active area of a tile
* to ensure continuous processing across tile borders. The amount of data
* needed depends on features enabled and some ISP parameters so this
* is program dependent.
*
* ISP extrapolates values outside image borders, so overfetch is needed only
* for borders between tiles.
*/
struct isp_overfetch {
/**
* Number of pixels needed from the left side of tile [0,UINT8_MAX].
* The functional range is [0,18].
*/
uint8_t left;
/**
* Number of pixels needed from the right side of tile [0,UINT8_MAX].
* The functional range is [0,30].
*/
uint8_t right;
/**
* Number of pixels needed from above the tile [0,UINT8_MAX].
* The functional range is [0,18].
*/
uint8_t top;
/**
* Number of pixels needed from below the tile [0,UINT8_MAX]
* The functional range is [0,18].
*/
uint8_t bottom;
/**
* Number of pixels needed by PRU unit from left and right sides of
* the tile. This is needed to adjust tile border locations so that
* they align correctly at demosaic input [0,UINT8_MAX].
* The functional range is [0,4].
*/
uint8_t pru_ovf_h;
/**
* Alignment requirement for tile width. Minimum alignment is 2 pixels,
* but if CAR is used (@ref ISP5BLOCK_ENABLED_AP_CAR is set in
* @ref isp5_program::enables_config) this must be set to half of the
* LPF kernel width.
*/
uint8_t alignment;
/** Reserved */
uint8_t pad1__[2];
};
/**
* @defgroup IspTypeId ISP Type
* @{
*/
/**
* Identifier for ISP5
*/
#define ISP_TYPE_ID_ISP5 MK_U16(3)
/**
* Identifier for ISP6
*/
#define ISP_TYPE_ID_ISP6 MK_U16(4)
/**
* Identifier for ISP7
*/
#define ISP_TYPE_ID_ISP7 MK_U16(5)
/** @} */
/**
* Magic bytes to detect ISP program struct with version information
*/
#define ISP5_PROGRAM_STRUCT_ID MK_U32(0x50505349)
/**
* Version of ISP program struct layout. The value of this constant must
* be increased every time when the memory layout of isp5_program struct
* changes.
*/
#define ISP5_PROGRAM_STRUCT_VERSION MK_U16(3)
/**
* @brief ISP program buffer
*
* Settings needed by RCE ISP driver to generate a config buffer for ISP.
* Content and format of these fields is the same as corresponding ISP
* config buffer fields. See ISP_Microcode.docx for detailed description.
*/
struct isp5_program {
/**
* Magic bytes to identify memory area as an ISP program.
* Initialize with @ref ISP5_PROGRAM_STRUCT_ID.
*/
uint32_t isp_program_struct_id;
/**
* ISP program structure version. Current version is defined by
* @ref ISP5_PROGRAM_STRUCT_VERSION.
*/
uint16_t isp_program_struct_version;
/**
* @ref IspTypeId "Target ISP version" for the ISP program.
*/
uint16_t isp_type;
/**
* Sources for LS, AP and PRU blocks.
* Format is same as in ISP's XB_SRC_0 register
* For ISP7, this is the stats crossbar used for
* HIST1 and LAC1, with ISP_STATS_XB_SRC register format.
*
* @rststar
* +-------+---------------------------------------------------+
* | Bits | Description |
* +=======+===================================================+
* | 14:10 | Source for LS unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 7 = H0 |
* | | 8 = H1 |
* | | 3 = DMCV |
* | | 4 = APEX |
* | | 5 = APEXCV |
* | | 9 = LAC0 |
* | | 10 = LAC1 |
* | | 6 = FB |
* | | 17 = TF0 |
* | | 18 = TF1 |
* | | 14 = AT0 |
* | | 15 = AT1 |
* | | 16 = AT2 |
* | | 2 = PRU |
* | | 19 = SHARP0 |
* | | 20 = SHARP1 |
* | | 21 = AFM |
* +-------+---------------------------------------------------+
* | 9:5 | Source for AP unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 22 = LS |
* | | 7 = H0 |
* | | 8 = H1 |
* | | 9 = LAC0 |
* | | 10 = LAC1 |
* | | 6 = FB |
* | | 17 = TF0 |
* | | 18 = TF1 |
* | | 14 = AT0 |
* | | 15 = AT1 |
* | | 16 = AT2 |
* | | 2 = PRU |
* +-------+---------------------------------------------------+
* | 4:0 | Source for PRU unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 22 = LS |
* | | 7 = H0 |
* | | 8 = H1 |
* | | 3 = DMCV |
* | | 4 = APEX |
* | | 5 = APEXCV |
* | | 9 = LAC0 |
* | | 10 = LAC1 |
* | | 6 = FB |
* | | 17 = TF0 |
* | | 18 = TF1 |
* | | 14 = AT0 |
* | | 15 = AT1 |
* | | 16 = AT2 |
* +-------+---------------------------------------------------+
* @endrst
*/
uint32_t xbsrc0;
/**
* Sources for AT[0-2] and TF[0-1] blocks
* Format is same as in ISP's XB_SRC_1 register
* For ISP7, this is the output crossbar used for
* TF0, DS[0-2], with ISP_OUT_XB_SRC register format.
*
* @rststar
* +-------+---------------------------------------------------+
* | Bits | Description |
* +=======+===================================================+
* | 24:20 | Source for AT2 unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 22 = LS |
* | | 7 = H0 |
* | | 8 = H1 |
* | | 3 = DMCV |
* | | 4 = APEX |
* | | 5 = APEXCV |
* | | 9 = LAC0 |
* | | 10 = LAC1 |
* | | 6 = FB |
* | | 17 = TF0 |
* | | 18 = TF1 |
* | | 14 = AT0 |
* | | 15 = AT1 |
* | | 19 = SHARP0 |
* | | 20 = SHARP1 |
* | | 21 = AFM |
* | | 2 = PRU |
* +-------+---------------------------------------------------+
* | 19:15 | Source for AT1 unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 22 = LS |
* | | 7 = H0 |
* | | 8 = H1 |
* | | 3 = DMCV |
* | | 4 = APEX |
* | | 5 = APEXCV |
* | | 9 = LAC0 |
* | | 10 = LAC1 |
* | | 6 = FB |
* | | 17 = TF0 |
* | | 18 = TF1 |
* | | 14 = AT0 |
* | | 16 = AT2 |
* | | 19 = SHARP0 |
* | | 20 = SHARP1 |
* | | 21 = AFM |
* | | 2 = PRU |
* +-------+---------------------------------------------------+
* | 14:10 | Source for AT0 unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 22 = LS |
* | | 7 = H0 |
* | | 8 = H1 |
* | | 3 = DMCV |
* | | 4 = APEX |
* | | 5 = APEXCV |
* | | 9 = LAC0 |
* | | 10 = LAC1 |
* | | 6 = FB |
* | | 17 = TF0 |
* | | 18 = TF1 |
* | | 15 = AT1 |
* | | 16 = AT2 |
* | | 19 = SHARP0 |
* | | 20 = SHARP1 |
* | | 21 = AFM |
* | | 2 = PRU |
* +-------+---------------------------------------------------+
* | 9:5 | Source for TF1 unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 22 = LS |
* | | 7 = H0 |
* | | 8 = H1 |
* | | 3 = DMCV |
* | | 4 = APEX |
* | | 5 = APEXCV |
* | | 9 = LAC0 |
* | | 10 = LAC1 |
* | | 6 = FB |
* | | 17 = TF0 |
* | | 14 = AT0 |
* | | 15 = AT1 |
* | | 16 = AT2 |
* | | 19 = SHARP0 |
* | | 20 = SHARP1 |
* | | 21 = AFM |
* | | 2 = PRU |
* +-------+---------------------------------------------------+
* | 4:0 | Source for TF0 unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 22 = LS |
* | | 7 = H0 |
* | | 8 = H1 |
* | | 3 = DMCV |
* | | 4 = APEX |
* | | 5 = APEXCV |
* | | 9 = LAC0 |
* | | 10 = LAC1 |
* | | 6 = FB |
* | | 18 = TF1 |
* | | 14 = AT0 |
* | | 15 = AT1 |
* | | 16 = AT2 |
* | | 19 = SHARP0 |
* | | 20 = SHARP1 |
* | | 21 = AFM |
* | | 2 = PRU |
* +-------+---------------------------------------------------+
* @endrst
*/
uint32_t xbsrc1;
/**
* Sources for DS[0-2] and MW[0-2] blocks
* Format is same as in ISP's XB_SRC_2 register
* For ISP7, this is the AT1 MuxSelect used for
* AT1, with ISP_AT1_XB_SRC register format.
*
* @rststar
* +-------+---------------------------------------------------+
* | Bits | Description |
* +=======+===================================================+
* | 29:25 | Source for DS2 unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 22 = LS |
* | | 7 = H0 |
* | | 8 = H1 |
* | | 3 = DMCV |
* | | 4 = APEX |
* | | 5 = APEXCV |
* | | 9 = LAC0 |
* | | 10 = LAC1 |
* | | 6 = FB |
* | | 17 = TF0 |
* | | 18 = TF1 |
* | | 14 = AT0 |
* | | 15 = AT1 |
* | | 15 = AT2 |
* | | 19 = SHARP0 |
* | | 20 = SHARP1 |
* | | 2 = PRU |
* +-------+---------------------------------------------------+
* | 24:20 | Source for DS1 unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 22 = LS |
* | | 7 = H0 |
* | | 8 = H1 |
* | | 3 = DMCV |
* | | 4 = APEX |
* | | 5 = APEXCV |
* | | 9 = LAC0 |
* | | 10 = LAC1 |
* | | 6 = FB |
* | | 17 = TF0 |
* | | 18 = TF1 |
* | | 14 = AT0 |
* | | 15 = AT1 |
* | | 15 = AT2 |
* | | 19 = SHARP0 |
* | | 21 = AFM |
* | | 2 = PRU |
* +-------+---------------------------------------------------+
* | 19:15 | Source for DS0 unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 22 = LS |
* | | 7 = H0 |
* | | 8 = H1 |
* | | 3 = DMCV |
* | | 4 = APEX |
* | | 5 = APEXCV |
* | | 9 = LAC0 |
* | | 10 = LAC1 |
* | | 6 = FB |
* | | 17 = TF0 |
* | | 18 = TF1 |
* | | 14 = AT0 |
* | | 15 = AT1 |
* | | 16 = AT2 |
* | | 20 = SHARP1 |
* | | 21 = AFM |
* | | 2 = PRU |
* +-------+---------------------------------------------------+
* | 14:10 | Source for MW2 unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 22 = LS |
* | | 7 = H0 |
* | | 8 = H1 |
* | | 3 = DMCV |
* | | 4 = APEX |
* | | 5 = APEXCV |
* | | 9 = LAC0 |
* | | 10 = LAC1 |
* | | 6 = FB |
* | | 17 = TF0 |
* | | 18 = TF1 |
* | | 14 = AT0 |
* | | 15 = AT1 |
* | | 16 = AT2 |
* | | 19 = SHARP0 |
* | | 20 = SHARP1 |
* | | 21 = AFM |
* | | 2 = PRU |
* +-------+---------------------------------------------------+
* | 9:5 | Source for MW1 unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 22 = LS |
* | | 7 = H0 |
* | | 8 = H1 |
* | | 3 = DMCV |
* | | 4 = APEX |
* | | 5 = APEXCV |
* | | 9 = LAC0 |
* | | 10 = LAC1 |
* | | 6 = FB |
* | | 17 = TF0 |
* | | 18 = TF1 |
* | | 14 = AT0 |
* | | 15 = AT1 |
* | | 16 = AT2 |
* | | 19 = SHARP0 |
* | | 20 = SHARP1 |
* | | 21 = AFM |
* | | 2 = PRU |
* +-------+---------------------------------------------------+
* | 4:0 | Source for MW0 unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 22 = LS |
* | | 7 = H0 |
* | | 8 = H1 |
* | | 3 = DMCV |
* | | 4 = APEX |
* | | 5 = APEXCV |
* | | 9 = LAC0 |
* | | 10 = LAC1 |
* | | 6 = FB |
* | | 17 = TF0 |
* | | 18 = TF1 |
* | | 14 = AT0 |
* | | 15 = AT1 |
* | | 16 = AT2 |
* | | 19 = SHARP0 |
* | | 20 = SHARP1 |
* | | 21 = AFM |
* | | 2 = PRU |
* +-------+---------------------------------------------------+
* @endrst
*/
uint32_t xbsrc2;
/**
* Sources for FB, LAC[0-1] and HIST[0-1] blocks
* Format is same as in ISP's XB_SRC_3 register
* For ISP7, this is not used.
*
* @rststar
* +-------+---------------------------------------------------+
* | Bits | Description |
* +=======+===================================================+
* | 29:25 | Source for FB unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 22 = LS |
* | | 7 = H0 |
* | | 8 = H1 |
* | | 3 = DMCV |
* | | 4 = APEX |
* | | 5 = APEXCV |
* | | 9 = LAC0 |
* | | 10 = LAC1 |
* | | 17 = TF0 |
* | | 18 = TF1 |
* | | 14 = AT0 |
* | | 15 = AT1 |
* | | 15 = AT2 |
* | | 2 = PRU |
* +-------+---------------------------------------------------+
* | 19:15 | Source for LAC1 unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 22 = LS |
* | | 7 = H0 |
* | | 8 = H1 |
* | | 3 = DMCV |
* | | 4 = APEX |
* | | 5 = APEXCV |
* | | 9 = LAC0 |
* | | 6 = FB |
* | | 17 = TF0 |
* | | 18 = TF1 |
* | | 14 = AT0 |
* | | 15 = AT1 |
* | | 15 = AT2 |
* | | 19 = SHARP0 |
* | | 21 = AFM |
* | | 2 = PRU |
* +-------+---------------------------------------------------+
* | 14:10 | Source for LAC0 unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 22 = LS |
* | | 7 = H0 |
* | | 8 = H1 |
* | | 3 = DMCV |
* | | 4 = APEX |
* | | 5 = APEXCV |
* | | 10 = LAC1 |
* | | 6 = FB |
* | | 17 = TF0 |
* | | 18 = TF1 |
* | | 14 = AT0 |
* | | 15 = AT1 |
* | | 16 = AT2 |
* | | 20 = SHARP1 |
* | | 21 = AFM |
* | | 2 = PRU |
* +-------+---------------------------------------------------+
* | 9:5 | Source for H1 unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 22 = LS |
* | | 7 = H0 |
* | | 3 = DMCV |
* | | 4 = APEX |
* | | 5 = APEXCV |
* | | 9 = LAC0 |
* | | 10 = LAC1 |
* | | 6 = FB |
* | | 17 = TF0 |
* | | 18 = TF1 |
* | | 14 = AT0 |
* | | 15 = AT1 |
* | | 16 = AT2 |
* | | 2 = PRU |
* +-------+---------------------------------------------------+
* | 4:0 | Source for H0 unit: |
* | | 0 = NONE |
* | | 1 = MR0 |
* | | 22 = LS |
* | | 8 = H1 |
* | | 3 = DMCV |
* | | 4 = APEX |
* | | 5 = APEXCV |
* | | 9 = LAC0 |
* | | 10 = LAC1 |
* | | 6 = FB |
* | | 17 = TF0 |
* | | 18 = TF1 |
* | | 14 = AT0 |
* | | 15 = AT1 |
* | | 16 = AT2 |
* | | 2 = PRU |
* +-------+---------------------------------------------------+
* @endrst
*/
uint32_t xbsrc3;
/**
* @ref IspSubUnitEnables "ISP sub-unit enable bits"
* specify which of the ISP blocks are enabled for this
* ISP program.
*/
uint32_t enables_config;
/**
* AFM configuration. See microcode documentation for details.
*
* @rststar
* +-------+---------------------------------------------------+
* | Bits | Description |
* +=======+===================================================+
* | 31 | AFM output mode on pixel bus: |
* | | 0 = original pixel data (bypass mode) |
* | | 1 = metric data output, no original pixel data |
* +-------+---------------------------------------------------+
* | 23 | AFM metric mode for ROI7: |
* | | 0 = accumulate using signed metric |
* | | 1 = accumulate using ABS(metric) |
* +-------+---------------------------------------------------+
* | 22 | AFM metric mode for ROI6: |
* | | 0 = accumulate using signed metric |
* | | 1 = accumulate using ABS(metric) |
* +-------+---------------------------------------------------+
* | 21 | AFM metric mode for ROI5: |
* | | 0 = accumulate using signed metric |
* | | 1 = accumulate using ABS(metric) |
* +-------+---------------------------------------------------+
* | 20 | AFM metric mode for ROI4: |
* | | 0 = accumulate using signed metric |
* | | 1 = accumulate using ABS(metric) |
* +-------+---------------------------------------------------+
* | 19 | AFM metric mode for ROI3: |
* | | 0 = accumulate using signed metric |
* | | 1 = accumulate using ABS(metric) |
* +-------+---------------------------------------------------+
* | 18 | AFM metric mode for ROI2: |
* | | 0 = accumulate using signed metric |
* | | 1 = accumulate using ABS(metric) |
* +-------+---------------------------------------------------+
* | 17 | AFM metric mode for ROI1: |
* | | 0 = accumulate using signed metric |
* | | 1 = accumulate using ABS(metric) |
* +-------+---------------------------------------------------+
* | 16 | AFM metric mode for ROI0: |
* | | 0 = accumulate using signed metric |
* | | 1 = accumulate using ABS(metric) |
* +-------+---------------------------------------------------+
* | 7 | AFM ROI7 enable (0 = disable, 1 = enable) |
* +-------+---------------------------------------------------+
* | 6 | AFM ROI6 enable (0 = disable, 1 = enable) |
* +-------+---------------------------------------------------+
* | 5 | AFM ROI5 enable (0 = disable, 1 = enable) |
* +-------+---------------------------------------------------+
* | 4 | AFM ROI3 enable (0 = disable, 1 = enable) |
* +-------+---------------------------------------------------+
* | 3 | AFM ROI3 enable (0 = disable, 1 = enable) |
* +-------+---------------------------------------------------+
* | 2 | AFM ROI2 enable (0 = disable, 1 = enable) |
* +-------+---------------------------------------------------+
* | 1 | AFM ROI1 enable (0 = disable, 1 = enable) |
* +-------+---------------------------------------------------+
* | 0 | AFM ROI0 enable (0 = disable, 1 = enable) |
* +-------+---------------------------------------------------+
* @endrst
*/
uint32_t afm_ctrl;
/**
* Bit mask for stats blocks enabled (1 = enabled, 0 = disable).
* Must be consistent with other configuration and pushbuffer.
*
* +-------+---------------------------------------------------+
* | Bits | Description |
* +=======+===================================================+
* | 0 | HIST0 |
* +-------+---------------------------------------------------+
* | 1 | HIST1 |
* +-------+---------------------------------------------------+
* | 2 | PRU OR |
* +-------+---------------------------------------------------+
* | 3 | LAC0 ROI0 |
* +-------+---------------------------------------------------+
* | 4 | LAC0 ROI1 |
* +-------+---------------------------------------------------+
* | 5 | LAC0 ROI2 |
* +-------+---------------------------------------------------+
* | 6 | LAC0 ROI3 |
* +-------+---------------------------------------------------+
* | 7 | LAC1 ROI0 |
* +-------+---------------------------------------------------+
* | 8 | LAC1 ROI1 |
* +-------+---------------------------------------------------+
* | 9 | LAC1 ROI2 |
* +-------+---------------------------------------------------+
* | 10 | LAC1 ROI3 |
* +-------+---------------------------------------------------+
* | 11 | FB |
* +-------+---------------------------------------------------+
* | 12 | FM |
* +-------+---------------------------------------------------+
* | 13 | AFM ROI0 |
* +-------+---------------------------------------------------+
* | 14 | AFM ROI1 |
* +-------+---------------------------------------------------+
* | 15 | AFM ROI2 |
* +-------+---------------------------------------------------+
* | 16 | AFM ROI3 |
* +-------+---------------------------------------------------+
* | 17 | AFM ROI4 |
* +-------+---------------------------------------------------+
* | 18 | AFM ROI5 |
* +-------+---------------------------------------------------+
* | 19 | AFM ROI6 |
* +-------+---------------------------------------------------+
* | 20 | AFM ROI7 |
* +-------+---------------------------------------------------+
* | 21 | LTM |
* +-------+---------------------------------------------------+
* | 22 | PRU hist |
* +-------+---------------------------------------------------+
* | 23 | LTM auto sk |
* +-------+---------------------------------------------------+
*/
uint32_t stats_aidx_flag;
/**
* Number of slots filled in @ref pushbuffer array.
*/
uint32_t pushbuffer_size;
/**
* Horizontal pixel increment for DS0 downscaler in U5.20 format.
* I.e. 2.5 implies downscaling by a factor of 2.5 [0,0x1FFFFFF].
* Must be >= 1.0: either down-scaling or non-scaling.
*/
uint32_t ds0_pixel_incr_h;
/**
* Horizontal pixel increment for DS1 downscaler in U5.20 format.
* I.e. 2.5 implies downscaling by a factor of 2.5 [0,0x1FFFFFF].
* Must be >= 1.0: either down-scaling or non-scaling.
*/
uint32_t ds1_pixel_incr_h;
/**
* Horizontal pixel increment for DS2 downscaler in U5.20 format.
* I.e. 2.5 implies downscaling by a factor of 2.5 [0,0x1FFFFFF].
* Must be >= 1.0: either down-scaling or non-scaling.
*/
uint32_t ds2_pixel_incr_h;
/** ISP overfetch requirements */
struct isp_overfetch overfetch;
struct {
struct isp_crop_rect mw_crop;
} outputs_mw[ISP_MAX_OUTPUTS];
/**< Memory write crop region for each write port. */
/** Reserved */
uint32_t pad1__[11];
/**
* Push buffer containing ISP settings related to this program.
* No relocations will be done for this push buffer; all registers
* that contain memory addresses that require relocation must be
* specified in the capture descriptor ISP payload.
*/
uint32_t pushbuffer[NVISP5_ISP_PROGRAM_PB_SIZE / sizeof(uint32_t)]
CAPTURE_DESCRIPTOR_ALIGN;
} CAPTURE_DESCRIPTOR_ALIGN;
/**
* @brief ISP Program ringbuffer element
*
* Each element in the ISP program ringbuffer contains a program descriptor
* immediately followed by the @ref isp5_program "ISP program".
*/
struct isp5_program_entry {
/** ISP program descriptor */
struct isp_program_descriptor prog_desc;
/** ISP program buffer */
struct isp5_program isp_prog;
} CAPTURE_DESCRIPTOR_ALIGN;
#pragma GCC diagnostic ignored "-Wpadded"
#endif /* INCLUDE_CAMRTC_CAPTURE_H */
Reference in New Issue View Git Blame Copy Permalink