Use nvgpu list APIs instead of linux list APIs
to store pending semaphore waits
Jira NVGPU-13
Change-Id: I42fc6c6233e39f475a939ddd6a81c0cda851b6bf
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1454693
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Renaming was done with the following command:
$ find -type f | \
xargs sed -i 's/struct mem_desc/struct nvgpu_mem/g'
Also rename mem_desc.[ch] to nvgpu_mem.[ch].
JIRA NVGPU-12
Change-Id: I69395758c22a56aa01e3dffbcded70a729bf559a
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1325547
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update the debugging APIs in nvgpu to be more coherent and less dependent
on Linux kernel APIs and data structures. The old API is maintained for
backwards compatibility but the prints themselves are changed.
The old API now prints stuff like this:
[ 46.376077] nvgpu: gk20a_channel_suspend:3430 [DBG] suspend channel 508
[ 46.376242] nvgpu: gk20a_channel_suspend:3430 [DBG] suspend channel 509
[ 46.376359] nvgpu: gk20a_channel_suspend:3430 [DBG] suspend channel 510
[ 46.376466] nvgpu: gk20a_channel_suspend:3430 [DBG] suspend channel 511
[ 46.376604] nvgpu: gk20a_fifo_update_runlist_locked:3090 [DBG] runlist_id : 0, switch to new buffer 0x 4003a0000
[ 46.378348] nvgpu: gk20a_mm_l2_flush:5259 [DBG] l2_flush_dirty 0x2
[ 46.378562] nvgpu: clk_config_pll:170 [DBG] low_PL 1(div1), high_PL 2(div2)
[ 46.378684] nvgpu: clk_config_pll:170 [DBG] low_PL 8(div8), high_PL 17(div17)
Each line starts with 'nvgpu:' since this is the nvgpu driver. Then there's
the function name which is is right justified and post-fixed with a line
number. This keeps all statements lined up so long as the function name does
not exceed the length of characters alloted for function names (33 currently).
Lines are also left justified with 4 available spaces since there are currently
no source files with over 9999 lines. The type of message (DBG, WRN, ERR) is
then printed in brackets. Finally there's whatever message is to be printed.
The new API will be largely the same except there will be an additional
print of the GPU that the message has originated from in order to help debug
cases where both an iGPU and dGPU are active. Also the implicit newline
added in the legacy API has been removed. This is inline with essentially
every other print function in the C world. There are numerous places where
'\n' is added despite it not being needed which results in log files being
littered with blank lines. This makes the logs much harder to read.
Bug ...
Change-Id: I7bc87f2dbbaebf6eb6c9de1a629a0e2963e1804c
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1329487
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split as_gk20a.c into two parts:
common/linux/ioctl_as.c deals with as related devnodes and ioctls.
This file contains all the Linux specific parts of as_gk20a.c.
common/as.c deals with general as_gk20a maintenance and is Linux
independent.
JIRA NVGPU-16
Change-Id: I2d8541e0bd6ce159dc6e4de8e819dfcff0fa8f80
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1330803
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
- check return value of nvgpu_mutex_init in clk_mclk.c
- declare new callback g->ops.pmu.mclk_deinit() to
deinitialize mclk mutexes
- and define this callback for gp106
- add corresponding nvgpu_mutex_destroy calls in
deinitialization
Jira NVGPU-13
Change-Id: I1491c084d330ac9756c9520477e6fe494560e651
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1321294
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
ctrl_gk20a.c had some direct accesses to hardware. These violate the
HAL rules, because we don't have per-GPU ctrl, and thus the code
cannot be made GPU independent.
Move all GR accesses to new GR HALs and use existing bus HAL for
accessing timer. Remove #includes of all hardware headers.
JIRA NVGPU-28
Change-Id: I57e67519f62e9bd6c3e725e1bef6e366190f5834
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1327001
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move code that touches host registers and instance block to fifo HAL.
This involves adding HAL ops for the fifo HAL functions that get
called from outside fifo. This clears responsibility of channel by
leaving it only managing channels in software and push buffers.
channel had member ramfc defined, but it was not used, to remove it.
pbdma_acquire_val consisted both of channel logic and hardware
programming. The channel logic was moved to the caller and only
hardware programming was moved.
Change-Id: Id005787f6cc91276b767e8e86325caf966913de9
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1322423
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the name field from struct gpu_ops up to struct gk20a. The field
is not a function op, so it doesn't belong in gpu_ops.
Replace all uses of dev_name() with use of g->name when possible.
JIRA NVGPU-16
Change-Id: Ic6e99e39258cbf3bb7c806962cbbd7de5126688f
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1328534
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
fifo reset_enable_hw is reorged to clear and enable pbdma/fifo interrupts
after all the required configuration such as configuring timeouts,
enabling timeout detections are taken care of.
JIRA GPUT19X-74
JIRA GPUT19X-47
Change-Id: Id780cc11d858db18f8d748c037954ede73298506
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/1325351
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Clean up gk20a.c by removing direct accesses to MC and moving the
accesses to happen via MC HAL.
The chip detection logic has to violate the HAL and call gk20a
version directly, because HAL ops cannot be set up before chip has
been identified.
Change-Id: I4cdd0ef3fcf7d3b561a3fca4247a8356fe8d18e1
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1321576
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This change refactors the teardown in remove to ensure that it is
possible to unload the driver while leaving fds open. This is achieved
by making sure that the SW state is kept alive till all fds are closed
and by checking that subsequent calls to ioctls after the teardown fail.
Normally, this would be achieved ny calls into gk20a_busy(), but in
kickoff we dont call into that to reduce latency, so we need to check
the driver status directly, and also in some of the functions
as we need to make sure the ioctl does not dereference the device or
platform struct
bug 200277762
JIRA: EVLR-1023
Change-Id: I163e47a08c29d4d5b3ab79f0eb531ef234f40bde
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1320219
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Shreshtha Sahu <ssahu@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Support for hwpm reservations in the virtual case:
- Add session ops for checking and setting global and context reservations, and
releasing reservations
- in the native case, these just update reservation counts and flags
- in the vgpu case, when the reservation count is 0, check with the RM server
that a reservation is possible: for global reservations, no other guest
can have a reservation; for context reservations, no other guest can have
a global reservation
- in the vgpu case, when the reservation count is decremented to 0, notify
the RM server that the guest no longer has any reservations
Bug 1775465
JIRA VFND-3428
Change-Id: Idf115b730e465e35d0745c96a8f8ab6b645c7cae
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: http://git-master/r/1323375
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
After driver remove, the device structure passed in gk20a_busy can be
invalid. To solve this the prototype of the function is modified to pass
the gk20a struct instead of the device pointer.
bug 200277762
JIRA: EVLR-1023
Change-Id: I08eb74bd3578834d45115098ed9936ebbb436fdf
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1320194
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Init device_fatal, channel_fatal and restartable fifo intr pbdma s/w
variables for pbdma_intr_0 interrupt masks for each GPU version separately
pbdma_intr_0 field differences for each GPU version:-
-gk20a : bit 28 does not exists in hw
-gm20b : bit 8(lbreq), 20(xbarconnect) and 28 do not exist in hw
-gp10b : bit 8(lbreq), 20(xbarconnect) do not exist in hw. bit 28,
(syncpoint_illegal) added in hw but is not being handled.
-gk20a/gm20b/gp10b
bit 24 eng_reset and bit 25 semaphore always existed in hw but never
handled
JIRA GPUT19X-47
Change-Id: I209191f57c5ea5b15081b7dc2411801d3537017c
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/1325402
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Simulator support is intermixed with the rest of code in gk20a.c.
Move that code away from gk20a.c to an own file.
Change-Id: Idd3c8795cec5eadc6e49811b5b8ff0592c49a7d2
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1323230
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Tested-by: Bharat Nihalani <bnihalani@nvidia.com>
The main driver structure is not refcounted properly,
so when the driver unload, file desciptors associated to the
driver are kept open with dangling references to the main object.
This change adds referencing to the gk20a structure.
bug 200277762
JIRA: EVLR-1023
Change-Id: Id892e9e1677a344789e99bf649088c076f0bf8de
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1317420
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move all programming of FB to fb_*.c files, and remove the inclusion
of FB hardware headers from other files.
TLB invalidate function took previously a pointer to VM, but the new
API takes only a PDB mem_desc, because FB does not need to know about
higher level VM.
GPC MMU is programmed from the same function as FB MMU, so added
dependency to GR hardware header to FB.
GP106 ACR was also triggering a VPR fetch, but that's not applicable
to dGPU, so removed that call.
Change-Id: I4eb69377ac3745da205907626cf60948b7c5392a
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1321516
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move clock APIs from gk20a_platform to gpu_ops. At the same time
allow use of internal get_rate/set_rate for querying both GPCCLK
and PWRCLK on iGPU.
At the same time we can replace calls to clk framework with the
new HAL and drop direct dependency to clk framework.
gp10b ops were replaced as a whole at HAL initialization. That
replaces anything set in platform probe stage, so reduce that to
touch only clock gating regs.
Change-Id: Iaf219b1f000d362dbf397d45832f52d25463b31c
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1300113
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
get_rate is already used for call-back that queries the last set
clock rate. This instance of get_rate actually measures the frequency
so renaming it to measure_freq.
At the same time modify to use hertz instead of megahertz. We use
fractional megahertz already in GPU.
Change-Id: I387473d6a6cbf3bb9b9e5a909677a1a725403c32
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1300111
Reviewed-by: Alex Waterman <alexw@nvidia.com>
JIRA: EVLR-1004
(*) Refactor the non-stalling interrupt path to execute clear on the
top half, so on dGPU case processing of stalling interrupts does not
block non-stalling one.
(*) Use a worker thread to do semaphore wakeups and allow batching of
the non-stalling operations.
(*) Fix a bug where some gpus will not properly track the completion
of interrupts, preventing safe driver unloads
Change-Id: Icc90a3acba544c97ec6a9285ab235d337ab9eefa
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1312796
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Navneet Kumar <navneetk@nvidia.com>
Add ability to suspend/resume contexts for a debug session
(NVGPU_DBG_GPU_IOCTL_SUSPEND_RESUME_CONTEXTS), in virtualized
case:
- added hal function to resume contexts.
- added vgpu support for suspend contexts, i.e. build a list
of channel ids, and send TEGRA_VGPU_CMD_SUSPEND_CONTEXTS
- added vgpu support for resume contexts, i.e. build a list
of channel ids, and send TEGRA_VGPU_CMD_RESUME_CONTEXTS
Bug 1791111
Change-Id: Icc1c00d94a94dab6384ac263fb811c00fa4b07bf
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: http://git-master/r/1294761
(cherry picked from commit d17a38eda312ffa92ce92e5bafc30727a8b76c4e)
Reviewed-on: http://git-master/r/1299059
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Cory Perry <cperry@nvidia.com>
Tested-by: Cory Perry <cperry@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
trace_printk() does an extra stringify operation before calling
do_trace_printk(). The string ends up unused. This has an impact
to kernel even if we never end up using trace_printk().
Disable use of trace_printk() and introduce a Kconfig option for
re-enabling it.
Change-Id: I2e1014f5231f2089d7dc3cb2539e3eb5f4d58361
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1295298
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Implement kmem abstraction and tracking in nvgpu. The abstraction
helps move nvgpu's core code away from being Linux dependent and
allows kmem allocation tracking to be done for Linux and any other
OS supported by nvgpu.
Bug 1799159
Bug 1823380
Change-Id: Ieaae4ca1bbd1d4db4a1546616ab8b9fc53a4079d
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1283828
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove nvgpu_gpuid_t18x.h since this file is now visible. Migrate
the relevant definitions and defines into their expected places and
make the code use the real defines. No longer is hiding t18x specific
stuff necessary.
Bug 1799159
Change-Id: I47fa2392e46fdb7aacc70aeb0cc8c3f5ca0dc22f
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1300976
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Implement a worker thread to replace the delayed works in channel
watchdog and job cleanups. Watchdog runs by polling the channel states
periodically, and job cleanup is performed on channels that are appended
on a work queue consumed by the worker thread. Handling both of these
two in the same thread makes it impossible for them to cause a deadlock,
as has previously happened.
The watchdog takes references to channels during checking and possibly
recovering channels. Jobs in the cleanup queue have an additional
reference taken which is released after the channel is processed. The
worker is woken up from periodic sleep when channels are added to the
queue.
Currently, the queue is only used for job cleanups, but it is extendable
for other per-channel works too. The worker can also process other
periodic actions dependent on channels.
Neither the semantics of timeout handling or of job cleanups are yet
significantly changed - this patch only serializes them into one
background thread.
Each job that needs cleanup is tracked and holds a reference to its
channel and a power reference, and timeouts can only be processed on
channels that are tracked, so the thread will always be idle if the
system is going to be suspended, so there is currently no need to
explicitly suspend or stop it.
Bug 1848834
Bug 1851689
Bug 1814773
Bug 200270332
Jira NVGPU-21
Change-Id: I355101802f50841ea9bd8042a017f91c931d2dc7
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: http://git-master/r/1297183
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Moved ACR interface headers from acr_gm20b.h/acr_gp106.h to
Its specific header files under drivers/gpu/nvgpu/include/nvgpu/acr/
Folder.
- nvgpu_acr.h - Top-level header-file which include ACR interfaces
headers & defines required to communicate with ACR, including this
header file is good to get access into ACR interface & made changes
accordingly,
-Deleted acr.h & acr_t18x.h as not required anymore
& removed its include from dependent files.
Jira NVGPU-19
Change-Id: Ie404043cfe1ab32404eb63a43831f470d8436324
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: http://git-master/r/1304748
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Instead of using Linux APIs for mutex and spinlocks
directly, use new APIs defined in <nvgpu/lock.h>
Replace Linux specific mutex/spinlock declaration,
init, lock, unlock APIs with new APIs
e.g
struct mutex is replaced by struct nvgpu_mutex and
mutex_lock() is replaced by nvgpu_mutex_acquire()
And also include <nvgpu/lock.h> instead of including
<linux/mutex.h> and <linux/spinlock.h>
Add explicit nvgpu/lock.h includes to below
files to fix complilation failures.
gk20a/platform_gk20a.h
include/nvgpu/allocator.h
Jira NVGPU-13
Change-Id: I81a05d21ecdbd90c2076a9f0aefd0e40b215bd33
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1293187
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In the PCI init/de-init code only disable IRQs if they were enabled.
The enable happens in the common power_on code. The PCI routines could
both be called without the common power_on code being called which
causes an extra disable to happen.
Bug 200275531
Change-Id: I43a8a9881f1e9ae254bf36230f29849df074657f
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1301701
(cherry picked from commit cca70e9adccee1ef65a0a6d95a4494fc87500c17)
Reviewed-on: http://git-master/r/1298954
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove gm204/gm206 support. It was used only in the interim until
Pascal cards were available, and we don't maintain that code anymore.
This patch leaves only BIOS code.
Change-Id: I215988603d4588ef710bdda6e47449e9235e78ac
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1302224
GVS: Gerrit_Virtual_Submit
Most of BIOS parsing code is not specific to any particular GPU. Move
most of the code to generic files, and leave only chip specific parts
dealing with microcontroller boot into chip specific files.
As most of the parsing is generic, they do not need to be called via
HALs so remove the HALs and change the calls into direct function
calls.
All definitions meant to be used outside BIOS code itself are now in
<nvgpu/bios.h>
Change-Id: Id48e94c74511d6e95645e90e5bba5c12ef8da45d
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1302222
GVS: Gerrit_Virtual_Submit
This ioctl can be used on gp10b to set a flag in the context header
indicating this context should be run at elevated clock
frequency. FECS ctxsw ucode will read this flag as part of the context
switch and will request higher GPU clock frequencies from BPMP for the
duration of the context execution.
Bug 1819874
Change-Id: I84bf580923d95585095716d49cea24e58c9440ed
Signed-off-by: Peter Boonstoppel <pboonstoppel@nvidia.com>
Reviewed-on: http://git-master/r/1292746
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Change the prefix in the semaphore code to 'nvgpu_' since this code
is global to all chips.
Bug 1799159
Change-Id: Ic1f3e13428882019e5d1f547acfe95271cc10da5
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1284628
Reviewed-by: Varun Colbert <vcolbert@nvidia.com>
Tested-by: Varun Colbert <vcolbert@nvidia.com>
Add HAL for enabling and disabling shadow ROM. This removes XVE dependency
from bios code.
Change-Id: Icafec72dae71669376bbfb97077661b7165badb8
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1302223
