gr_gk20a_update_hwpm_ctxsw_mode() right now validates the incoming
hwpm mode, checks if it is already set, and if not, it will go ahead
and set the new hwpm mode by calling g->ops.gr.ctxsw_prog HALs
Instead of programming hwpm mode in gr_gk20a.c, move the programming
to gr/ctx and gr/subctx units by adding below APIs
nvgpu_gr_ctx_prepare_hwpm_mode() - validate the incoming mode and
check if it is already set
nvgpu_gr_ctx_set_hwpm_mode() - set pm mode in graphics context
nvgpu_gr_subctx_set_hwpm_mode() - set pm mode in subcontext
Add gpu_va field to struct pm_ctx_desc to store the gpu_va to be
programmed into context
Rename NVGPU_DBG_HWPM_CTXSW_MODE_* to NVGPU_GR_CTX_HWPM_CTXSW_MODE_*
and move them to gr/ctx.h
Remove below HALs since they are no longer used
g->ops.gr.ctxsw_prog.set_pm_mode_no_ctxsw()
g->ops.gr.ctxsw_prog.set_pm_mode_ctxsw()
g->ops.gr.ctxsw_prog.set_pm_mode_stream_out_ctxsw()
Jira NVGPU-1527
Jira NVGPU-1613
Change-Id: Id2a4d498182ec0e3586dc7265f73a25870ca2ef7
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2011093
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gr_gk20a_ctx_zcull_setup(), we configure context/subcontext with
zcull details
This API now does it directly by calling g->ops.gr.ctxsw_prog HAL
Move all context/subcontext setup to gr/ctx and gr/subctx units
respectively
Define and use below new APIs for same
gr/ctx : nvgpu_gr_ctx_zcull_setup()
gr/subctx : nvgpu_gr_subctx_zcull_setup()
Jira NVGPU-1527
Jira NVGPU-1613
Change-Id: I1b7b16baea60ea45535c623b5b41351610ca433e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2011090
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We use below APIs to update patch context
gr_gk20a_ctx_patch_write_begin()
gr_gk20a_ctx_patch_write_end()
gr_gk20a_ctx_patch_write()
Since patch context is owned by gr/ctx unit, move these APIs
to this unit and rename them to
nvgpu_gr_ctx_patch_write_begin()
nvgpu_gr_ctx_patch_write_end()
nvgpu_gr_ctx_patch_write()
Jira NVGPU-1527
Change-Id: Iee19c7a71d074763d3dcb9b1997cb2a3159d5299
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1989214
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We currently load and create new graphics context image in
gr_gk20a_load_golden_ctx_image()
This API will first load local golden image in new context
image and then initialize context appropriately by calling
g->ops.gr.ctxsw_prog() HALs
Move this sequence to gr/ctx unit and rename the API as
nvgpu_gr_ctx_load_golden_ctx_image()
Note that call to g->ops.gr.update_ctxsw_preemption_mode()
is moved out of this API and called directly from
gk20a_alloc_obj_ctx()
Jira NVGPU-1527
Change-Id: Id5a5b2cd2c0704fbefe536d581a37a60ec185ea9
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1989157
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently all the global contex buffers are mapped into each graphics
context. Move all the mapping/unmapping support to gr/ctx unit since
all the mappings are owned by context itself
Add nvgpu_gr_ctx_map_global_ctx_buffers() that maps all the global
context buffers into given gr_ctx
Add nvgpu_gr_ctx_get_global_ctx_va() that returns VA of the mapping
for requested index
Remove g->ops.gr.map_global_ctx_buffers() since it is no longer
required. Also remove below APIs
gr_gk20a_map_global_ctx_buffers()
gr_gk20a_unmap_global_ctx_buffers()
gr_tu104_map_global_ctx_buffers()
Remove global_ctx_buffer_size from nvgpu_gr_ctx since it is no
longer used
Jira NVGPU-1527
Change-Id: Ic185c03757706171db0f5a925e13a118ebbdeb48
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1987739
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new unit common/gr/ctx.c to manage GR context
This unit provides interfaces to allocate/free/map/unmap GR context,
patch context, pm context, ctxsw {preempt/spill/betacb/pagepool/rtvcb}
buffers.
It also provides APIs to set size of above buffers
Add new header file include/nvgpu/gr/ctx.h to declare all the interfaces.
Move nvgpu_gr_ctx, patch_desc, pm_ctx_desc, zcull_ctx_desc structures
to this unit
Add new structure nvgpu_gr_ctx_desc to hold context description
parameters. For now we add sizes of all the buffers here.
Add this structure to gr_gk20a for global reference
Remove gr_gp10b_alloc_buffer() since it is no longer used
Rename g->ops.gr.alloc_gfxp_rtv_cb() to g->ops.gr.init_gfxp_rtv_cb()
since this HAL now only sets the size of rtvcb ctxsw buffer
Remove gr->ctx_vars.buffer_size and gr->ctx_vars.buffer_total_size
since they were redundant. We already have gr->ctx_vars.golden_image_size
to denote golden image size
Jira NVGPU-1527
Change-Id: I8847b347f80235209dd5e28d979e79984ab85408
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1987702
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
