Introduce nvgpu_gmmu_map_partial() to map a specific size of a buffer
represented by nvgpu_mem, or what nvgpu_gmmu_map() used to do. Delete
the size parameter from nvgpu_gmmu_map() such that it now maps the
entire buffer. The separate size parameter is a historical artifact from
when nvgpu_mem did not exist yet; the typical use is to map the entire
buffer.
Mapping at a certain address with nvgpu_gmmu_map_fixed() still takes the
size parameter.
The returned address still has to be stored somewhere, typically to
mem.gpu_va by the caller so that the matching unmap variant finds the
right address.
Change-Id: I7d67a0b15d741c6bcee1aecff1678e3216cc28d2
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2601788
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Introduce nvgpu_gmmu_unmap_addr() to unmap a nvgpu_mem that was mapped
at some other address than mem.gpu_va, which can be the case for buffers
that are shared across different address spaces. Delete the address
parameter from nvgpu_gmmu_unmap(), as the common case is to store the
address to mem.gpu_va when mapping the buffer.
Modify some instances of consecutive unmap + free calls to call just
nvgpu_dma_unmap_free().
Change-Id: Iecd7c9aa41d04e9f48e055f6bc0c9227cd759c69
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2601787
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The function gk20a_mm_l2_flush incorrectly returns an error value
when it skips l2_flush when hardware is powered off.
This causes the following prints to occur even when the behavior is expected.
gv11b_mm_l2_flush:43 [ERR] gk20a_mm_l2_flush failed
nvgpu_gmmu_unmap_locked:1043 [ERR] gk20a_mm_l2_flush[1] failed
The above errors occur from the following paths
1) gk20a_remove -> gk20a_free_cb -> gk20a_remove_support ->
nvgpu_pmu_remove_support -> nvgpu_pmu_pg_deinit ->
nvgpu_dma_unmap_free
2) gk20a_remove -> gk20a_free_cb -> gk20a_remove_support ->
nvgpu_remove_mm_support -> gv11b_mm_mmu_fault_info_mem_destroy ->
nvgpu_dma_unmap_free
Since, these do not belong in the Poweron/Poweroff path, its okay to
skip flushing them when the hardware has powered off.
Fixed the userspace tests by allocating g->mm.bar1.vm to prevent NULL access
in gv11b_mm_l2_flush->tlb_invalidate.
Jira LS-77
Change-Id: I3ca71f5118daf4b2eeacfe5bf83d94317f29d446
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2523751
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Mapping of large buffers to GMMU end up needing many
pages for the PTE tables. Allocating these one by one
can end up being a performance bottleneck, particularly
in the virtualized case.
This is adding the following changes:
- As the TLB invalidation doesn't have access to mem_off,
allow top-level allocation by alloc_cache_direct().
- Define NVGPU_PD_CACHE_SIZE, the allocation size for a new slab
for the PD cache, effectively set to 64K bytes
- Use the PD cache for any allocation < NVGPU_PD_CACHE_SIZE
When freeing up cached entries, avoid prefetch errors by
invalidating the entry (memset to 0).
- Try to fall back to direct allocation of smaller chunk for
contiguous allocation failures.
- Unit test changes.
Bug 200649243
Change-Id: I0a667af0ba01d9147c703e64fc970880e52a8fbc
Signed-off-by: dt <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2404371
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Many tests used various incarnations of the mock register framework.
This was based on a dump of gv11b registers. Tests that greatly
benefitted from having generally sane register values all rely
heavily on this framework.
However, every test essentially did their own thing. This was not
efficient and has caused a some issues in cleaning up the device and
host code.
Therefore introduce a much leaner and simplified register framework.
All unit tests now automatically get a good subset of the gv11b
registers auto-populated. As part of this also populate the HAL with
a nvgpu_detect_chip() call. Many tests can now _probably_ have all
their HAL init (except dummy HAL stuff) deleted. But this does
require a few fixups here and there to set HALs to NULL where tests
expect HALs to be NULL by default.
Where necessary HALs are cleared with a memset to prevent unwanted
code from executing.
Overall, this imposes a far smaller burden on tests to initialize
their environments.
Something to consider for the future, though, is how to handle
supporting multiple chips in the unit test world.
JIRA NVGPU-5422
Change-Id: Icf1a63f728e9c5671ee0fdb726c235ffbd2843e2
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2335334
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Refactor user managed syncpoints out of the channel sync infrastructure
that deals with jobs submitted via the kernel api. The user syncpt only
needs to expose the id and gpu address of the reserved syncpoint. None
of the rest (fences, priv cmdbufs) is needed for that, so it hasn't been
ideal to couple with the user-allocated syncpts.
With user syncpts now provided by channel_user_syncpt, remove the
user_managed flag from the kernel sync api.
This allows moving all the kernel submit sync code to be conditionally
compiled in only when needed, and separates the user sync functionality
in a more clear way from the rest with a minimal API.
[this is squashed with commit 5111caea601a (gpu: nvgpu: guard user
syncpt with nvhost config) from
https://git-master.nvidia.com/r/c/linux-nvgpu/+/2325009]
Jira NVGPU-4548
Change-Id: I99259fc9cbd30bbd478ed86acffcce12768502d3
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2321768
(cherry picked from commit 1095ad353f5f1cf7ca180d0701bc02a607404f5e)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2319629
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_has_syncpoints is more general than a channel synchronization
related, so move it to nvhost.c from channel_sync.c. Move the
declaration from gk20a.h to nvhost.h.
As the debugfs knob is Linux related, move it from struct gk20a to
struct nvgpu_os_linux.
Jira NVGPU-4548
Change-Id: I4236086744993c3daac042f164de30939c01ee77
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2318814
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch adds the following code coverage
1) Add a test to fail the allocation of syncpt_name correctly.
2) Add a test that covers all three branches of get_sync_ro_map
3) Add entry into the SWUTS.h and SWUTS.sources
4) Add test entries in the required_tests.json file
5) add nvgpu_safe_add_u64 to fix cert-C INT30 violation
Jira NVGPU-913
Change-Id: If0ccc9a9314494af1a663eb8ef37a68644c18453
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2267389
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add coverage for the following APIs in the common.sync.syncpt unit.
nvgpu_channel_sync_to_syncpt
nvgpu_channel_sync_get_syncpt_id
nvgpu_channel_sync_get_syncpt_address
In the test "test_sync_create_fail" the branch syncpt_ro_map_gpu_va_fail
wasn't working correctly. This patch adds a change that makes it
execute correctly.
Jira NVGPU-913
Change-Id: I5551e49ebd9567d0b4866fada494eec300893f6a
Signed-off-by: ddutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2259898
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch constructs the initial setup for sync unit.
There are three simple tests currently. The first test inits the
environment necessary such as regspace init, hal init. The second
step simply fails the creation of the sync and the last test is meant
as a deinit step.
JIRA NVGPU-913
Change-Id: I1db72d9833c3c4bc3c3903a7d81cce06e9983509
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2248493
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
