Add a way to force idle and reset the GPU in case where GPU
rail gating is not supported
(i.e. platform->can_railgate = false)
In this case, we follow below sequence :
- once GPU is idle, get runtime reference which enables the clocks
- call prepare_poweroff() to save the state explicitly
- perform explicit reset assert/deassert
- call finalize_poweron() to restore the state
- drop the runtime reference taken earlier
Bug 1525284
Change-Id: Id5f3ec152093acd585631dfbf785d8e0561f9048
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/435620
GVS: Gerrit_Virtual_Submit
Reviewed-by: Arto Merilainen <amerilainen@nvidia.com>
Tested-by: Arto Merilainen <amerilainen@nvidia.com>
Increase the wait delays in do_idle() to 2000 mS and make use
of msleep instead of mdelays
Also, to check if GPU is rail gated or not, add a do-while()
loop which will keep checking the status and bail out as soon
as GPU is rail gated
This increase in delays is required to allow GPU sufficient
time to complete its work and get rail gated
These delays are specially needed during stress testing where
it is possible that a large amount of GPU work is blocked
during do_idle() and then it might take more time to complete
it while next do_idle() is waiting for it
Also, remove waiting on API gk20a_wait_channel_idle() for each
channels since it is sufficient to wait for refcount to be 1
bug 1529160
Change-Id: Ie541485fbdda76d79ae4a75dda928da240fc5d8f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/434192
(cherry picked from commit 5a621bf2aaf3355e1330a662dc98e943d68ef86d)
Reviewed-on: http://git-master/r/435133
Reviewed-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
While we are executing do_idle() API, it is possible that
unrailgate() gets invoked in midst of idling the GPU and
this can result in failure of do_idle()
To prevent simultaneous execution of these methods,
add a mutex railgate_lock and acquire it during
do_idle() and unrailgate() APIs
Also, keep this lock held if do_idle() is successful.
In success, lock will be released in do_unidle(),
otherwise release this lock before returning
Note that this lock should not be held in railgate() API
since we do not want it to be blocked during do_idle()
bug 1529160
Change-Id: I87114b5367eaa217376455a2699c0d21c451c889
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/434190
(cherry picked from commit 561dc8e0933ff2d72573292968b893a52f5f783a)
Reviewed-on: http://git-master/r/435131
Reviewed-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
This patch adds support to check if the host1x link exists and is
supported using the gpu characteristics ioctl.
Bug 1459653
Change-Id: I832eea217ed7f007e341dfde5769887e0882d6bb
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-on: http://git-master/r/433058
This is to weed out accesses to the GPU while it is gated. Otherwise
the accesses are silently dropped or cause a HW hang (on older chips).
Bug 1514949
Change-Id: Ice4cdb9f1f736978ebb3db847f39c7439bf98134
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/416339
Reviewed-by: Mitch Luban <mluban@nvidia.com>
Separate the code to load PMU firmware from the software init. This
allows folding ACR and non-ACR PMU software initialization sequences.
Bug 200006956
Change-Id: I74b289747852167e8ebf1be63036c790ae634da4
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/424768
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Do not abort GPU probe if secure page alloc fails.
We can just note that this allocation failed (using bool
secure_alloc_ready) and prevent further secure memory
allocation if this flag is not set.
Bug 1525465
Change-Id: Ie4eb6393951690174013d2de3db507876d7b657f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/427730
GVS: Gerrit_Virtual_Submit
Reviewed-by: Shridhar Rasal <srasal@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Make gpu power management feature configurations
as platform data. Keep existing sttaus for gk20a
and disable all power features for gm20b.
Bug 1523728
Change-Id: Ife7786863f18e21b882ac77085c7abc7c84d4cfc
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: http://git-master/r/426369
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Supriya Sharatkumar <ssharatkumar@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
During gk20a_pm_prepare_poweroff(), if call to gk20a_channel_suspend()
fails, we proceed to disable other components and then return error.
But when genpd sees the error, it will abort the suspend sequence and
keep the device state as active.
But since we have already disabled all the components, GPU lands in
invalid state.
Hence, if channel_suspend() fails then do not proceed but return
the error immediately
Bug 200010416
Change-Id: I553a2a25832a1be4941bb6b6ce490c950cdbe7fa
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/422248
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
VPR resize is done by forcing GPU to idle and then updating
VPR size from TLK.
There is no need now to call vpr_resize funtion from kernel
and hence these functions can be removed.
Bug 1487804
Change-Id: I758a6e0a99a58757866f1138b0a89594e2a33908
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/421703
(cherry picked from commit 391d9bacf053fe0dacffc76c36768f82912ad1f4)
Reviewed-on: http://git-master/r/419612
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Allocate dummy secure buffer of size PAGE_SIZE during gk20a_probe().
This will also help to initiate first secure memory (VPR)
resize call while GPU is rail gated and in reset.
This dummy buffer is released after we allocate some more
secure memory buffers in alloc_global_ctx_buffers()
Bug 1487804
Change-Id: I61604d9e5ffb585801ee893435c98a0d3e69d666
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/421701
(cherry picked from commit 4236ab3323ee3c02fac562740d8b80d763589dea)
Reviewed-on: http://git-master/r/419610
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
This patch reorders scaling resume to happen always when
we power on the GPU, so as to balance the scaling suspend
when we power off GPU.
bug 200010911
Change-Id: I9fde817fbf9fed7d90c48ea06050db4b82e670a8
Signed-off-by: Allen Yu <alleny@nvidia.com>
Reviewed-on: http://git-master/r/421541
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Rewrite PMU boot sequence as a state machine. At PMU power-up send
initial messages, and reset state machine. At each reply from PMU,
do the next stage of PMU boot and set state.
As now PMU and FECS boot are independent, we need to ensure engine
idle before saving ZBC.
Change-Id: I1ea747ab794ef08f1784eeabfdae7655d585ff21
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/410205
Otherwise other trace event headers included may also be created, which
leads to duplicate definition issues in the 3.14 kernel.
Signed-off-by: Dan Willemsen <dwillemsen@nvidia.com>
Add below two new APIs for gk20a :
1) gk20a_do_idle()
this API will force GPU to idle and railgate
2) gk20a_do_unidle()
this API will unblock all the tasks blocked by do_idle()
Bug 1487804
Change-Id: Ic5e7f2d19fb8d35f43666d0e309dde3022349d92
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/412061
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
- add rw_semaphore busy_lock for gpu busy() path
- take read lock on busy_lock inside gk20a_busy()
so that all usual requests can execute simultaneously
- write lock can be taken when we need to block all
of the gk20a_busy() calls
Bug 1487804
Change-Id: I1b162b38bce9621723d3e45280c6076816cf771a
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/412060
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Add gk20a as a sub power domain of host1x. This enforces keeping
host1x on when using gk20a.
Bug 200003112
Change-Id: I08db595bc7b819d86d33fb98af0d8fb4de369463
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-on: http://git-master/r/407006
(cherry picked from commit 009812b3e510518740e9c7e89b8b8b80439fe26a)
Reviewed-on: http://git-master/r/408013
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
When rail gating, we cleared all PMU status. Clear only the relevant
fields.
Change-Id: I5b4e8d74339aae6f1c6b945f45b8378bb563e8be
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/406843
Remove the path for turning on only gk20a. Always when turning on
hardware, turn both host1x and GPU on.
Change-Id: I5f972a487d3348bf2254bdb0fadb42ca600a559e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/406405
Currently the generic platform is used only if the device tree
defines that we have a generic platform available, however, the
generic platform is fully compatible with the gk20a we have in tegra.
This patch modifies the definitions so that we use generic platform
also for tegra - even if if tegra configuration option is not enabled.
Bug 1434573
Change-Id: Ib35ce0ab935d27764e960bf4d74a5016ae047a1f
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-on: http://git-master/r/396867
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Call railgate and unrailgate ops only if they are defined.
Change-Id: I0a87ac0259af3719098d4372be7e25f0a54416fc
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/396375
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-by: Bo Yan <byan@nvidia.com>
Two calls to gk20a_init_gpu_characteristics() is not needed.
GPU sim aperture was defined twice.
Change-Id: Iaf78611717c55b1cae456358fcae2641ad552d9f
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/383855
Reviewed-by: Automatic_Commit_Validation_User
This patch adds an interface for the gk20a driver to have
generic ops which are implemented by a chip specific HAL
layer. The HAL layer is provided by the gpu_ops struct which
defines function pointers for chip specific oeprations. This
is necessary for supporting multiple chips with the same
code base and minimal per chip hacking.
Also, since much code is common except in the HW headers
that are needed, the LTC common code is compiled by first
including the necessary chip specific header(s) and then
including the ltc common code file.
This allows for easy updating of functions that are only
different between chips as a result of register offset and
field changes whereas the HAL provides the mechanism for
functions that have actual semantic changes.
Change-Id: I96f9a8350d34e7e101beb141d4521fab69dcfbae
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/360627
(cherry picked from commit fe90cad939cf979fc2516a96e5911bd8ab6fc457)
Reviewed-on: http://git-master/r/362228
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
This adds new IOCTL that provides information for the userspace for
GPU characterization. Specifically, the following items are provided:
GPU arch/impl/rev, number of GPCs, L2 cache size, on-board video
memory size, num of tpc:s per gpc, and bus type. The primary user of
the new IOCTL will be rmapi_tegra.
Bug 1392902
Change-Id: Ia7c25c83c8a07821ec60be3edd018c6e0894df0f
Reviewed-on: http://git-master/r/346379
(cherry picked from commit 0b9ceca5a06d07cc8d281a92b76ebef8d4da0c92)
Reviewed-on: http://git-master/r/350658
Reviewed-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Signed-off-by: Sami Kiminki <skiminki@nvidia.com>
This far the scaling has been disabled only when we suspend the
system and therefore we unnecessarily keep gpu workers running even
if the gpu itself would be railgated. This is not proper behaviour
and it causes a race in suspend sequence.
This patch reorders scaling disable to happen always when we turn off
the GPU.
Bug 200004860
Change-Id: Ief0bfd89378d5a7ced26c3ef29094dd5c378b01a
Signed-off-by: Santosh Katvate <skatvate@nvidia.com>
Reviewed-on: http://git-master/r/410443
(cherry picked from commit bcae65bea24be2a1e0abe42522d99ba70c94cbe2)
Reviewed-on: http://git-master/r/413249
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
In some cases the gpu has still work pending while the device is
being suspended. This patch forces pm runtime to be disabled for
the device to avoid powering up the gpu unnecessarily.
Bug 1515437
Change-Id: I4b57d72eb34e794f0457d7a074d26c9d096a13b3
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-on: http://git-master/r/411968
Reviewed-by: Riham Haidar <rhaidar@nvidia.com>
Tested-by: Riham Haidar <rhaidar@nvidia.com>
Add gk20a as a sub power domain of host1x. This enforces keeping
host1x on when using gk20a.
Bug 200003112
Change-Id: I08db595bc7b819d86d33fb98af0d8fb4de369463
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-on: http://git-master/r/407543
Reviewed-by: Riham Haidar <rhaidar@nvidia.com>
Tested-by: Riham Haidar <rhaidar@nvidia.com>
Request irq at probe instead of at poweron. This allows investigating
interrupt numbers across rail gating cycles.
Change-Id: I6db4b3f1d865c6fbbd9d6a96c3df89617e169891
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-on: http://git-master/r/374859
Interrupts may be needed before we have actually silenced all
channels. Few possible scenarios include channel recovery during
teardown and sw method before the channels have been suspended.
This patch modifies the teardown path so that we disable interrupts
after the channels have been suspended.
Change-Id: Ifc36dbb74b1d36bd88d1220fa50a53c4072df4d8
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-on: http://git-master/r/394599
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Result of top_fs_status_r() is always constant. Do not dump it
anymore.
Change-Id: Ie1cfe872d70b2c3c8a7cef4df3870dacae8f8793
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/395208
Ensure devfreq is disabled before shutting down gk20a, to prevent
possible races with reading of gpu load, and the shutdown of gpu itself.
Bug 1492913
Change-Id: I016fdba9515120fc6cf3e771f60c61b9bf2027cb
Signed-off-by: Prashant Malani <pmalani@nvidia.com>
Reviewed-on: http://git-master/r/394296
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
