Renamed
- gk20a_tsg_set_runlist_interleave -> nvgpu_tsg_set_interleave
Moved set_interleave from runlist to tsg
- runlist.set_interleave -> tsg.set_interleave
Existing HAL was only setting tsg->interleave, and was not
accessing any register. This is now done in nvgpu_tsg_set_interleave
and tsg.set_interleave is only used in vgpu case.
Jira NVGPU-3156
Change-Id: I5dac1305afcbd950214316289cf704ee8b43fc89
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100610
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved the following HALs from fifo to tsg
- set_timeslice
- default_timeslice_us
Renamed
- gk20a_tsg_set_timeslice -> nvgpu_tsg_set_timeslice
- min_timeslice_us -> tsg_timeslice_min_us
- max_timeslice_us -> tsg_timeslice_max_us
Scale timeslice to take into account PTIMER clock in
nvgpu_runlist_append_tsg.
Removed gk20a_channel_get_timescale_from_timeslice, and
instead moved timeout and scale computation into runlist HAL,
when building TSG entry:
- runlist.get_tsg_entry
Use ram_rl_entry_* accessors instead of hard coded values
for default and max timeslices.
Added #defines for min, max and default timeslices.
Jira NVGPU-3156
Change-Id: I447266c087c47c89cb6a4a7e4f30acf834b758f0
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100052
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved the following HALs from fifo to tsg:
- tsg.bind_channel
- tsg.unbind_channel
- tsg.unbind_channel_check_hw_state
- tsg.unbind_channel_check_ctx_reload
- tsg.unbind_channel_check_eng_faulted
bind_channel and unbind_channel HALs are optional,
and only implemented for vgpu:
- vgpu_tsg_bind_channel
- vgpu_tsg_unbind_channel
Moved the following code from fifo to tsg:
- nvgpu_tsg_bind_channel
- nvgpu_tsg_unbind_channel
- nvgpu_tsg_unbind_channel_check_hw_state
- nvgpu_tsg_unbind_channel_check_ctx_reload
- gv11b_tsg_unbind_channel_check_eng_faulted
tsg is now explictly passed to bind/unbind operations,
along with ch
Jira NVGPU-2979
Change-Id: I337a3d73ceef5ff320b036b14739ef0e831a28ee
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084029
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
force_reset_ch obtains a tsg from a channel first before proceeding
with other work. Thus, force_reset_ch is moved as part of tsg unit to
avoid circular dependency between channel and tsg. TSGs can depend on
channels but channel cannot depend on TSGs.
Jira NVGPU-2978
Change-Id: Ib1879681287971d2a4dbeb26ca852d6b59b50f6a
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084927
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved enable/disable HALs from fifo to tsg:
- tsg.enable
- tsg.disable
gk20a_tsg_enable and gv11b_tsg_enable are moved to HAL,
since they are chip specific, even though they do not
directly access chip registers.
Removed vgpu_gv11b_tsg_enable as it was identical to
gv11b_tsg_enable.
Changed gv11b_fifo_locked_abort_runlist_active_tsgs and
gv11b_fifo_teardown_ch_tsg to use tsg.enable HAL instead
of calling directly gk20a_disable_tsg HAL implementation.
Jira NVGPU-2979
Change-Id: I721650c64dcf8cd158652e362292af45df43819f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2083156
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new unit vgpu subctx under common/vgpu/gr to manage
GR subcontext. This unit provides interfaces to allocate
and free subctx header.
Rename vgpu_subctx_gv11b* files to subctx_vgpu* files
renaming functions vgpu_gv11b_alloc_subctx_header to
vgpu_alloc_subctx_header and vgpu_gv11b_free_subctx_header
to vgpu_free_subctx_header which are called only if
NVGPU_SUPPORT_TSG_SUBCONTEXTS is enabled or free_channel_ctx_header
HAL op is set which is set only for gv11b for virtualization.
Also assign fifo HAL op free_channel_ctx_header to
vgpu_channel_free_ctx_header for vgpu gv11b which in turn
calls vgpu_free_subctx_header.
Jira GVSCI-334
Change-Id: Ib46e7be911632eba01cd21881077683b795f8bad
Signed-off-by: Aparna Das <aparnad@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2075872
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Native and vgpu were using different paths for fifo
init/deinit code.
Use same nvgpu_fifo_init_support for init code:
nvgpu_fifo_init_support
g->ops.fifo.setup_sw
vgpu_fifo_setup_sw (NEW)
Use same nvgpu_fifo_remove_support for deinit code:
nvgpu_fifo_remove_support (NEW)
g->ops.fifo.cleanup_sw (NEW)
vgpu_fifo_cleanup_sw (NEW)
Also implemented gk20a_fifo_cleanup_sw for native case.
Jira NVGPU-1306
Jira NVGPU-2855
Change-Id: Iefe303cc224f804a206422e2efffda9da1616d89
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2029649
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add fifo sub-unit to common.fifo to handle init/deinit code
and global support functions.
Split init into:
- nvgpu_channel_setup_sw
- nvgpu_tsg_setup_sw
- nvgpu_fifo_setup_sw
- nvgpu_runlist_setup_sw
- nvgpu_engine_setup_sw
- nvgpu_userd_setup_sw
- nvgpu_pbdma_setup_sw
Split de-init into
- nvgpu_channel_cleanup_sw
- nvgpu_tsg_cleanup_sw
- nvgpu_fifo_cleanup_sw
- nvgpu_runlist_cleanup_sw
- nvgpu_engine_cleanup_sw
- nvgpu_userd_cleanup_sw
- nvgpu_pbdma_cleanup_sw
Added the following HALs
- runlist.length_max
- fifo.init_pbdma_info
- fifo.userd_entry_size
Last 2 HALs should be moved resp. to pbdma and userd sub-units,
when available.
Added vgpu implementation of above hals
- vgpu_runlist_length_max
- vgpu_userd_entry_size
- vgpu_channel_count
Use hals in vgpu_fifo_setup_sw.
Jira NVGPU-1306
Change-Id: I954f56be724eee280d7b5f171b1790d33c810470
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2029620
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The corresponding HAL pointer for gk20a_fifo_wait_engine_idle is not
being invoked anywhere and hence they are removed from the code.
The function gk20a_fifo_wait_engine_idle belongs to engine unit and is
only called in a non-safe build, hence its moved to engine unit and is
restricted by a non-safe build flag NVGPU_ENGINE
Also, gk20a_fifo_wait_engine_idle is renamed to nvgpu_engine_wait_for_idle
Jira NVGPU-1315
Change-Id: Ie550c7e46a4284dfe368859d828b1994df34185f
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2033631
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create a new directory fifo under common vgpu path moving all
vgp common fifo files under that directory.
Move vgpu runlist implementations to a new file runlist_vgpu.c
and create corresponding header file.
Also fix lines over 80 chars in fifo_vgpu.c
Jira GVSCI-334
Change-Id: Ic00535b22a6066a0d27435b9a987de7fa701ea05
Signed-off-by: Aparna Das <aparnad@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2011762
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
