Remove the mm.get_iova_addr() HAL and replace it with a new HAL
called mm.gpu_phys_addr(). This new HAL provides the real phys
address that should be passed to the GPU from a physical address
obtained from a scatter list. It also provides a mechanism by
which the HAL code can add extra bits to a GPU physical address
based on the attributes passed in. This is necessary during GMMU
page table programming.
Also remove the flags argument from the various address functions.
This flag was used for adding an IO coherence bit to the GPU
physical address which is not supported.
JIRA NVGPU-30
Change-Id: I69af5b1c6bd905c4077c26c098fac101c6b41a33
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1530864
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update the high level mapping logic. Instead of iterating over the
GPU VA iterate over the scatter-gather table chunks. As a result
each GMMU page table update call is simplified dramatically.
This also modifies the chip level code to no longer require an SGL
as an argument. Each call to the chip level code will be guaranteed
to be contiguous so it only has to worry about making a mapping from
virt -> phys.
This removes the dependency on Linux that the chip code currently
has. With this patch the core GMMU code still uses the Linux SGL but
the logic is highly transferable to a different, nvgpu specific,
scatter gather list format in the near future.
The last major update is to push most of the page table attribute
arguments to a struct. That struct is passed on through the various
mapping levels. This makes the funtions calls more simple and
easier to follow.
JIRA NVGPU-30
Change-Id: Ibb6b11755f99818fe642622ca0bd4cbed054f602
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master/r/1484104
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Remove gk20a support. Leave only gk20a code which is reused by other
GPUs.
JIRA NVGPU-38
Change-Id: I3d5f2bc9f71cd9f161e64436561a5eadd5786a3b
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master/r/1507927
GVS: Gerrit_Virtual_Submit
Fixed below static sparse warnings by making either
function as static or including right header.
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/common/linux/module.c:816:5: warning: symbol 'gk20a_pm_init' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gk20a/bus_gk20a.c:28:6: warning: symbol 'gk20a_bus_init_hw' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gk20a/bus_gk20a.c:54:6: warning: symbol 'gk20a_bus_isr' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gk20a/bus_gk20a.c:90:5: warning: symbol 'gk20a_read_ptimer' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gk20a/bus_gk20a.c:147:6: warning: symbol 'gk20a_init_bus' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gk20a/ltc_gk20a.c:232:6: warning: symbol 'gk20a_init_ltc' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gk20a/fb_gk20a.c:75:6: warning: symbol 'gk20a_fb_debug_mode_enabled' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gm20b/hal_gm20b.c:184:5: warning: symbol 'gm20b_init_hal' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gm20b/fb_gm20b.c:165:5: warning: symbol 'gm20b_fb_vpr_info_fetch' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gm20b/ltc_gm20b.c:103:5: warning: symbol 'gm20b_ltc_cbc_ctrl' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gm20b/ltc_gm20b.c:168:6: warning: symbol 'gm20b_ltc_init_fs_state' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gm20b/ltc_gm20b.c:195:6: warning: symbol 'gm20b_ltc_isr' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gm20b/ltc_gm20b.c:221:5: warning: symbol 'gm20b_ltc_cbc_fix_config' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gm20b/ltc_gm20b.c:236:6: warning: symbol 'gm20b_flush_ltc' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gm20b/ltc_gm20b.c:350:6: warning: symbol 'gm20b_init_ltc' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/tegra/linux/clk.c:72:6: warning: symbol 'nvgpu_linux_init_clk_support' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gp10b/ltc_gp10b.c:206:6: warning: symbol 'gp10b_init_ltc' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gp10b/fb_gp10b.c:98:6: warning: symbol 'gp10b_init_fb' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gp10b/hal_gp10b.c:190:5: warning: symbol 'gp10b_init_hal' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gp10b/priv_ring_gp10b.c:79:6: warning: symbol 'gp10b_init_priv_ring' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gp106/hal_gp106.c:222:5: warning: symbol 'gp106_init_hal' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gp106/fb_gp106.c:42:6: warning: symbol 'gp106_init_fb' was not declared. Should it be static?
Bug 200299572
Change-Id: I32f9a3cb65314bd1eb1a6d93cda5796cfa64d738
Signed-off-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-on: http://git-master/r/1481804
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Hide the Linux specific nvgpu_mem fields so that in subsequent patches
core code can instead of using struct sg_table it can use mem_desc.
Routines for accessing system specific fields will be added as needed.
This is the first step in a fairly major overhaul of the GMMU mapping
routines. There are numerous issues with the current design (or lack
there of): massively coupled code, system dependencies, disorganization,
etc.
JIRA NVGPU-12
JIRA NVGPU-30
Change-Id: I2e7d3ae3a07468cfc17c1c642d28ed1b0952474d
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1464076
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Use platform agnostic delay functions instead of Linux kernel APIs.
This allows removing dependency to Linux header linux/delay.h. At the
same time remove #include lines for other unused Linux headers.
JIRA NVGPU-16
Change-Id: I46b9ccb80e0b67efb86ec85676e5a55ff835c0ec
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1460113
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Renaming was done with the following command:
$ find -type f | \
xargs sed -i 's/struct mem_desc/struct nvgpu_mem/g'
Also rename mem_desc.[ch] to nvgpu_mem.[ch].
JIRA NVGPU-12
Change-Id: I69395758c22a56aa01e3dffbcded70a729bf559a
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1325547
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add wrapper header nvgpu/types.h. It checks if build is for Linux
kernel and pulls in linux/types.h.
Delete also all #includes for linux/types.h which are not strictly
necessary, and change the remaining ones to use the new wrapper.
JIRA NVGPU-13
Change-Id: I1ddfef0b0b9d840e3e41a62f69c7cb9148d2d5fa
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1453371
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the name field from struct gpu_ops up to struct gk20a. The field
is not a function op, so it doesn't belong in gpu_ops.
Replace all uses of dev_name() with use of g->name when possible.
JIRA NVGPU-16
Change-Id: Ic6e99e39258cbf3bb7c806962cbbd7de5126688f
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1328534
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Clean up gk20a.c by removing direct accesses to MC and moving the
accesses to happen via MC HAL.
The chip detection logic has to violate the HAL and call gk20a
version directly, because HAL ops cannot be set up before chip has
been identified.
Change-Id: I4cdd0ef3fcf7d3b561a3fca4247a8356fe8d18e1
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1321576
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move all programming of FB to fb_*.c files, and remove the inclusion
of FB hardware headers from other files.
TLB invalidate function took previously a pointer to VM, but the new
API takes only a PDB mem_desc, because FB does not need to know about
higher level VM.
GPC MMU is programmed from the same function as FB MMU, so added
dependency to GR hardware header to FB.
GP106 ACR was also triggering a VPR fetch, but that's not applicable
to dGPU, so removed that call.
Change-Id: I4eb69377ac3745da205907626cf60948b7c5392a
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1321516
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reorganize the HW headers of gk20a. The headers are moved to a
new directory:
include/nvgpu/hw/gk20a
And from the code are included like so:
#include <nvgpu/hw/gk20a/hw_pwr_gk20a.h>
This is the first step in reorganizing all of the HW headers for
gm20b, gm206, etc. This is part of a larger effort to re-structure
and make the driver more readable and scalable.
Bug 1799159
Change-Id: Ic151155cbc2e6f75009f2d9d597b364a1bed2c4c
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1244790
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fix small problems related to signed versus unsigned comparisons
throughout the driver. Bump up the warning level to prevent such
problems from occuring in future.
Change-Id: I8ff5efb419f664e8a2aedadd6515ae4d18502ae0
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1252068
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fixed the following sparse warning by including the "fb_gk20a.h" header file:
- fb_gk20a.c: warning: symbol 'fb_gk20a_reset' was not declared.
Should it be static?
Bug 200088648
Change-Id: I1ba6051455a22e81da6598eebdccfa8b45b78c3e
Signed-off-by: Amit Sharma (SW-TEGRA) <amisharma@nvidia.com>
Reviewed-on: http://git-master/r/768203
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-on: http://git-master/r/770654
FB reset was added for gk20a. It should be invoked also on gm20b.
Change-Id: I0b074bc50a889108edae93d62b3194e54bfda881
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/765366
Define smallest compressible page size per SoC, and use that for
determining if a compressible kind should be downgraded to
uncompressed.
Bug 1605769
Change-Id: I7c9991ba0ae82fe533641f045e506c0b01a10d8b
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/724492
Compression page size varies depending on architecture. Make it
129kB on gk20a and gm20b.
Also export some common functions from gm20b.
Bug 1592495
Change-Id: Ifb1c5b15d25fa961dab097021080055fc385fecd
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/673790
Implement support for 64kB large page size. Add an API to create an
address space via IOCTL so that we can accept flags, and assign one
flag for enabling 64kB large page size.
Also adds APIs to set per-context large page size. This is possible
only on Maxwell, so return error if caller tries to set large page
size on Kepler.
Default large page size is still 128kB.
Change-Id: I20b51c8f6d4a984acae8411ace3de9000c78e82f
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
