Remove NVGPU_GPU_IOCTL_ALLOC_AS_FLAGS_USERSPACE_MANAGED and
NVGPU_AS_ALLOC_USERSPACE_MANAGED flags which are used for supporting
userspace managed address-space. This functionality is not implemented
fully in kernel neither going to be implemented in near future.
Jira NVGPU-9832
Bug 4034184
Change-Id: I3787d92c44682b02d440e52c7a0c8c0553742dcc
Signed-off-by: Shashank Singh <shashsingh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2882168
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Subcontext PDBs and valid mask in the instance blocks of the channels
in various subcontexts has to be updated when new subcontext is
created or a subcontext is removed.
Replayable fault state is cached in the channel structure. Replayable
fault state for subcontext is set based on first channel's bind
parameter. It was earlier programmed in function channel_setup_ramfc.
init_inst_block_core is updated to setup TSG level pdb map and mask.
Added new hal gv11b_channel_bind to enable the subcontext on channel
bind.
Bug 3677982
Change-Id: I58156c5b3ab6309b6a4b8e72b0e798d6a39c1bee
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2719994
Reviewed-by: Ankur Kishore <ankkishore@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
While creating a new channel, ioctls are called in the below sequence:
1. GPU_IOCTL_OPEN_CHANNEL
2. AS_IOCTL_BIND_CHANNEL
3. TSG_IOCTL_BIND_CHANNEL_EX
4. CHANNEL_ALLOC_GPFIFO_EX
5. CHANNEL_ALLOC_OBJ_CTX.
subctx pdbs and valid mask are programmed in the channel instance block
in the channel ioctls AS_IOCTL_BIND_CHANNEL & CHANNEL_ALLOC_GPFIFO_EX.
Programming them in the ioctl AS_IOCTL_BIND_CHANNEL is redundant.
Remove related hal g->ops.mm.init_inst_block_for_subctxs.
The hal init_inst_block will program context pdb and big page size.
The hal init_inst_block_core will program context pdb, big page size
and subctx 0 pdb. This is used by h/w units (fecs, pmu, hwpm, bar1,
bar2, sec2, gsp, perfbuf etc.).
For user channels, subctx pdbs are programmed as part of ramfc setup.
Bug 3677982
Change-Id: I6656b002d513404c1fd7c3d349933e80cca7e604
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2680907
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The PMA unit can only access GPU VAs within a 4GB window, hence both
the user allocated PMA buffer and the kernel allocated bytes available
buffer should lie in the same 4GB window. This is accomplished by
carving out and reserving a 4GB VA space in perbuf.vm and using fixed
GPU VAs to ensure that both buffers are bound within the same 4GB window.
In addition, update ALLOC_PMA_STREAM to use pma_buffer_offset,
pma_buffer_map_size fields correctly.
Bug 3503708
Change-Id: Ic5297a22c2db42b18ff5e676d565d3be3c1cd780
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2671637
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit
nvgpu_timeout_init() returns an error code only when the flags parameter
is invalid. There are very few possible values for flags, so extract the
two most common cases - cpu clock based and a retry based timeout - to
functions that cannot fail and thus return nothing. Adjust all callers
to use those, simplfying error handling quite a bit.
Change-Id: I985fe7fa988ebbae25601d15cf57fd48eda0c677
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2613833
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Use fixed address mapping for pma byte buffer so that the address of
this buffer always fits in 32 bits.
This also requires to move unmap sequence to OS specific function since
different unmap API is now needed for linux and QNX.
Also call nvgpu_prof_free_pma_stream_priv_data() before
nvgpu_profiler_free_pma_stream() since former uses mm->perfbuf which
is released in later.
Bug 2510974
Jira NVGPU-5360
Change-Id: I398b0ca4f96527d6e09c9aacacb4b43c90f5bfc9
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2424691
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Right now PMA byte buffer address is allocated in the range of
0x1ffc010000. The register that stores this address is only 32-bit and
there is no corresponding _hi() register, so the address must fit in
32 bits.
Update nvgpu_vm_init() parameters in nvgpu_perfbuf_init_vm() so that a
low_hole of only 4K is used. This allows the address to be allocated
in the range of 0x4000000.
Also map byte buffer before PMA stream buffer so that byte buffer always
gets lower address.
There is only one PMA stream buffer allowed to be mapped right now so
this works for now. But in future multiple buffers can be mapped and this
solution needs to be reworked.
Bug 2510974
Jira NVGPU-5360
Change-Id: Ief1a9ee54d554e3bc13c7a9567934dcbeaefbcc6
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2418520
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Support new IOCTL to manage PMA stream meta data by adding below API
nvgpu_prof_ioctl_pma_stream_update_get_put()
Add nvgpu_perfbuf_update_get_put() to handle all the updates coming
from userspace and to pass all required information.
Add gops.perf.update_get_put() to handle all HW accesses required in
perf HW unit.
Add gops.perf.bind_mem_bytes_buffer_addr() to bind the available bytes
buffer while binding HWPM streamout.
Bug 2510974
Jira NVGPU-5360
Change-Id: Ibacc2299b845e47776babc081759dfc4afde34fe
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2406484
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a_perfbuf_map() allocates perfbuf VM, maps the user buffer into new
VM, and then triggers gops.perfbuf.perfbuf_enable(). This HAL then does
following :
- Allocate perfbuf instance block
- Initialize perfbuf instance block
- Reset stream buffer
- Program instance block address in PMA registers
- Program user buffer address into PMA registers
New profiler interface will have it's own API to setup PMA strem, and
it requires above setup to be done in two phases of perfbuf
initialization and then user buffer setup.
Split above functionalities into below functions
- nvgpu_perfbuf_init_vm()
- Allocate perfbuf VM
- Call gops.perfbuf.init_inst_block() to initialize perfbuf instance
block
- gops.perfbuf.init_inst_block()
- Allocate perfbuf instance block
- Initialize perfbuf instance block
- Program instance block address in PMA registers using
gops.perf.init_inst_block()
- In case of vGPU, trigger TEGRA_VGPU_CMD_PERFBUF_INST_BLOCK_MGT
command to gpu server
- gops.perf.init_inst_block()
- Reset stream buffer
- Program user buffer address into PMA registers
Also add corresponding cleanup functions as below :
gops.perf.deinit_inst_block()
gops.perfbuf.deinit_inst_block()
nvgpu_perfbuf_deinit_vm()
Bug 2510974
Jira NVGPU-5360
Change-Id: I486370f21012cbb7fea84fe46fb16db95bc16790
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2372984
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The alloc_insty_block() function in the MM HAL is not a HAL. It does
not abstract any HW accesses; instead it just wraps a dma allocation.
As such remove it from the HAL and move the single gk20a implementation
to common/mm/mm.c as nvgpu_alloc_inst_block().
JIRA NVGPU-2042
Change-Id: I0a586800a11cd230ca43b85f94a35de107f5d1e1
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109049
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 14.4 doesn't allow the usage of integer types as booleans
in the controlling expression of an if statement or an iteration
statement.
Fix violations where the integer variables err, ret, status are used
as booleans in the controlling expression of if and loop statements.
JIRA NVGPU-1019
Change-Id: Ia2ec5f1db3c7a1884efe5ba7b8b4d9ebbd021734
Signed-off-by: Amurthyreddy <amurthyreddy@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1921373
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add separate unit for perfbuf in common/perf/perfbuf.c which does not need to
include any h/w file. This unit will utilize HALs exported by
perf_*.c units for h/w accesses.
Add corresponding header file at include/nvgpu/perfbuf.h
Add new HAL gops.perfbuf with below operations :
gops.perfbuf.perfbuf_enable()
gops.perfbuf.perfbuf_disable()
Remove below debug session specific HALs
gops.dbg_session_ops.perfbuffer_enable()
gops.dbg_session_ops.perfbuffer_disable()
Delete file gv11b/dbg_gpu_gv11b.c since it is no longer needed now as it was
only including perfbuf sequence
Also remove perfbuf sequences from gk20a/dbg_gpu_gk20a.c
Jira NVGPU-1102
Change-Id: I57b87c9f0dcd85784f8002bc92728b6d78a68d98
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1819303
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
