- On older chips, PMU uses CMD-MSG queue method to
communicate with NvGPU.
- From Turing onwards, PMU uses RPC method for this.
- During poweroff, we release pmu_sequence and reset the
members of the structure.
- For chips that use RPC, we need to free the payload as well
and then reset the members.
- Add pmu_seq_cleanup hal for this.
Bug 4019694
Bug 4059157
Change-Id: Ieb474fe4ed81f54d78480214cde53b51d45652c6
Signed-off-by: Divya <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2882267
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch adds nvenc support for TU104
- Fetch engine/dev info for nvenc
- Falcon NS boot (fw loading) support
- Engine context creation for nvenc
- Skip golden image for multimedia engines
- Avoid subctx for nvenc as it is a non-VEID engine
- Job submission/flow changes for nvenc
- Code refactoring to scale up the support for other multimedia
engines in future.
Bug 3763551
Change-Id: I03d4e731ebcef456bcc5ce157f3aa39883270dc0
Signed-off-by: Santosh BS <santoshb@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2859416
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Currently KMD_SCHEDULING_WORKER_THREAD can be enabled/disabled using
compile time flag but this flag does give ability to control the
feature based on the chip.
GSP is enabled only on ga10b where KMD_SCHEDULING_WORKER_THREAD should
be disabled while should be enabled for other chips at the same time
to support GVS tests.
Change adds enabled flag to control KMD_SCHEDULING_WORKER_THREAD based
on the chip.
Bug 3935433
Change-Id: I9d2f34cf172d22472bdc4614073d1fb88ea204d7
Signed-off-by: prsethi <prsethi@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2867023
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Subcontext PDBs and valid mask in the instance blocks of the channels
in various subcontexts has to be updated when new subcontext is
created or a subcontext is removed.
Replayable fault state is cached in the channel structure. Replayable
fault state for subcontext is set based on first channel's bind
parameter. It was earlier programmed in function channel_setup_ramfc.
init_inst_block_core is updated to setup TSG level pdb map and mask.
Added new hal gv11b_channel_bind to enable the subcontext on channel
bind.
Bug 3677982
Change-Id: I58156c5b3ab6309b6a4b8e72b0e798d6a39c1bee
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2719994
Reviewed-by: Ankur Kishore <ankkishore@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
The wait_pending HAL is now modified to simply
check the pending status of a given runlist.
The while loop is removed from this HAL.
A new function nvgpu_runlist_wait_pending_legacy() is
added that emulates the older wait_pending() HAL.
nvgpu_runlist_tick() is modified to accept a 64 bit
"preempt_grace_ns" value.
These changes prepare for upcoming control-fifo parser
changes.
Jira NVGPU-8619
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: If3f288eb6f2181743c53b657219b3b30d56d26bc
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2766100
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This change is reading the live pes from the register
"gr_gpc0_gpm_pd_live_physical_pes_r" and set it to
"gr_gpc0_swdx_pes_mask_r".
Every PES needs at least a TPC to work. If any of the TPCs
are floorswept,the live PES mask is read from
"gr_gpc0_gpm_pd_live_physical_pes_r" and the corresponding
active PES mask is updated in "gr_gpc0_swdx_pes_mask_r".
Bug 3677421
Change-Id: I899ac41c4a82beb3ce75c84ad57dcad262a49ba1
Signed-off-by: Dinesh T <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2736560
(cherry picked from commit 85f2ceb3db6eeef925b49553f445d8cc31ec39da)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2759135
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
While creating a new channel, ioctls are called in the below sequence:
1. GPU_IOCTL_OPEN_CHANNEL
2. AS_IOCTL_BIND_CHANNEL
3. TSG_IOCTL_BIND_CHANNEL_EX
4. CHANNEL_ALLOC_GPFIFO_EX
5. CHANNEL_ALLOC_OBJ_CTX.
subctx pdbs and valid mask are programmed in the channel instance block
in the channel ioctls AS_IOCTL_BIND_CHANNEL & CHANNEL_ALLOC_GPFIFO_EX.
Programming them in the ioctl AS_IOCTL_BIND_CHANNEL is redundant.
Remove related hal g->ops.mm.init_inst_block_for_subctxs.
The hal init_inst_block will program context pdb and big page size.
The hal init_inst_block_core will program context pdb, big page size
and subctx 0 pdb. This is used by h/w units (fecs, pmu, hwpm, bar1,
bar2, sec2, gsp, perfbuf etc.).
For user channels, subctx pdbs are programmed as part of ramfc setup.
Bug 3677982
Change-Id: I6656b002d513404c1fd7c3d349933e80cca7e604
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2680907
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Patch defines a ZBC static table and configure it at sw layer. Later
existing API read this sw configuration and program it to hw.
This is applicable only for ga10b safety build and for other chips/
configuration it will be supported in the legacy way.
Bug 3585766
Change-Id: I00d79162c0b096616e3f555da965e82e47c014d1
Signed-off-by: prsethi <prsethi@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2713821
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
BVEC changes for nvgpu_rc_pbdma_fault and nvgpu_rc_mmu_fault
started reporting below MISRA issue.
kernel/nvgpu/drivers/gpu/nvgpu/common/fifo/tsg.c:321:
1. misra_c_2012_rule_5_1_violation: Declaration with identifier
"nvgpu_tsg_unbind_channel_check_hw_state", which is ambiguous.
kernel/nvgpu/drivers/gpu/nvgpu/common/fifo/tsg.c:349:
2. other_declaration: The first 31 characters of identifiers
"nvgpu_tsg_unbind_channel_check_ctx_reload" and
"nvgpu_tsg_unbind_channel_check_hw_state" are identical.
Do below renames to fix the issue. Doing both for consistency.
s/nvgpu_tsg_unbind_channel_check_hw_state/nvgpu_tsg_unbind_channel_hw_state_check
s/nvgpu_tsg_unbind_channel_check_ctx_reload/nvgpu_tsg_unbind_channel_ctx_reload_check
JIRA NVGPU-6772
Change-Id: Ib92cabe11c486621351bf15ddb86e20d16d514c4
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2584152
(cherry picked from commit a619f259c6a4ffccb05550767212989af60c2a90)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2706551
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit
Update PES, ROP exception handling for NVGPU_ERRATA_3524791. Enable the
errata for all Volta+ chips.
ROP, PES exceptions are being reported using the physical-id,
where logical-id should have been used. All ESR status registers are
reported using logical-id, so this matches with the SW expectation.
To address the (1), update ROP, PES exception handler translate from
physical to logical-id before reading the status registers.
Bug 3524791
Change-Id: Ieacbfb306bb0e69cf0113dc92f18e401573722e3
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2680029
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Volta+ chips supports PES floorsweeping and Ampere+(iGPU) chips supports
ROP floorsweeping. At present, the driver isn't aware of PES, ROP
floorsweeping, make the driver PES, ROP floorsweeping aware by introducing the
following fields in nvgpu_gr_config:
- gpc_(rop/pes)_mask: Contains the bit mask of non FSed ROP/PES units per GPC.
- gpc_(rop/pes)_logical_id_map: Translates per GPC ROP/PES physical id to
logical id.
Introduce the following HAL functions to read PES/ROP FS data:
- gops_fuse.fuse_status_opt_(pes/rop)_gpc: This fuction gets the FS
config from the fuse.
- gops_top.get_max_(pes/rop)_per_gpc: Gets the maximum number of PES/ROP
units that can be present in a GPC.
In addition, introduce the enabled flag NVGPU_SUPPORT_PES_FS to identify chips
which support PES floorsweeping, piggyback on NVGPU_SUPPORT_ROP_IN_GPC
enabled flag to identify ROP floorsweeping.
Bug 3524791
Change-Id: I065bab6c02618fe38892c8c890b069c340b85301
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2679570
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new profiler resource type NVGPU_PROFILER_PM_RESOURCE_TYPE_PC_SAMPLER.
Introduce regops HAL get_hwpm_pc_sampler_register_ranges to get
allowlist for PC_SAMPLER resources. Re-generate allowlist files to include
register ranges for PC_SAMPLER resources.
Update uapi header to advertise new resource type
NVGPU_PROFILER_PM_RESOURCE_ARG_PC_SAMPLER.
Bug 3408536
Change-Id: I7009ef822665771eed727da48ef1e89dcc6b9c4b
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2689057
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
a. LAUNCH_ERR
- Userspace error.
- Triggered due to faulty launch.
- Handle using recovery to reset CE engine and teardown the
faulty channel.
b. An INVALID_CONFIG -
- Triggered when LCE is mapped to floorswept PCE.
- On iGPU, we use the default PCE 2 LCE HW mapping.
The default mapping can be read from NV_CE_PCE2LCE_CONFIG
INIT value in CE refmanual.
- NvGPU driver configures the mapping on dGPUs (currently only on
Turing).
- So, this interrupt can only be triggered if there is
kernel or HW error
- Recovery ( which is killing the context + engine reset) will
not help resolve this error.
- Trigger Quiesce as part of handling.
c. A MTHD_BUFFER_FAULT -
- NvGPU driver allocates fault buffers for all TSGs or contexts,
maps them in BAR2 VA space and writes the VA into channel
instance block.
- Can be triggered only due to kernel bug
- Recovery will not help, need quiesce
d. FBUF_CRC_FAIL
- Triggered when the CRC entry read from the method fault buffer
does not match the computed CRC from the methods contained in
the buffer.
- This indicates memory corruption and is a fatal interrupt which
at least requires the LCE to be reset before operations can
start again, if not the entire GPU.
- Better to quiesce on memory corruption
CE Engine reset (via recovery) will not help.
e. FBUF_MAGIC_CHK_FAIL
- Triggered when the MAGIC_NUM entry read from the method fault
buf does not match NV_CE_MTHD_BUFFER_GLOBAL_HDR_MAGIC_NUM_VAL
- This indicates memory corruption and is a fatal interrupt
- Better to quiesce on memory corruption
f. STALLING_DEBUG
- Only triggered with SW write for debug purposes
- Debug interrupt, currently ignored
Move launch error handling from GP10b to GV11b HAL as -
1. LAUNCHERR_REPORT errcode METHOD_BUFFER_ACCESS_FAULT is not
defined on Pascal
2. We do not support GP10b on dev-main ToT
JIRA NVGPU-8102
Change-Id: Idc84119bc23b5e85f3479fe62cc8720e98b627a5
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2678893
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below CE interrupts do not have any users(usecases) on safety build;
disable them only on safety build.
1. BLOCKPIPE stall intr: Not used by GFX(VKSC) and CUDA on safety.
2. NONBLOCK_PIPE nonstall intr: Non-stall intrs are not supported
on safety build. Also, this one is not used by GFX(VKSC)
and CUDA.
3. STALLING_DEBUG intr: Added in Orin tree. It is only needed for
debugging. Disable on safety build as there is no current
usage in driver.
4. POISON_ERROR intr: Poison is a fault containment and not
supported on GA10b.
5. INVALID_CONFIG intr: Floor sweeping not supported on functional
safety SKU.
Bug 3548082
Change-Id: I8d97ccb38f138b2c04a780e1c255a64d28723405
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2671927
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
At present, for each resume cycle the driver sends the
"nvgpu_cbc_op_clear" command to L2 cache controller, this causes the
contents of the compression bit backing store to be cleared, and results
in corrupting the metadata for all the compressible surfaces already allocated.
Fix this by updating cbc.init function to be aware of resume state and
not clear the compression bit backing store, instead issue
"nvgpu_cbc_op_invalide" command, this should leave the backing store in a
consistent state across suspend/resume cycles.
The updated cbc.init HAL for gv11b is reusable acrosss multiple chips, hence
remove unnecessary chip specific cbc.init HALs.
Bug 3483688
Change-Id: I2de848a083436bc085ee98e438874214cb61261f
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2660075
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Earlier, buffer metadata support was made dependent on compression.
However that is not required.
Update the enabled flag NVGPU_SUPPORT_BUFFER_METADATA setup for
various hals. Enable it for all from linux characteristics init.
Update REGISTER_BUFFER and GET_BUFFER_INFO ioctls to seggregate
the compile/runtime compression functionality.
If compression is disabled, return error in case comptags are
required else don't fail the REGISTER_BUFFER ioctl.
Bug 200767700
Change-Id: I3850ccc879f180c97b830fb3d652c094b9d28a5b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2614378
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GPU HW expects physically contiguous addresses when clearing
the compression bit store in memory. Currently on hypervisor setup,
the DMA_ATTR_FORCE_CONTIGUOUS flag ensures contiguous IPA, but it
is not possible to ensure contiguous physical memory.Disable
compression on virtualized environments until physically contiguous
memory is feasible.
Buffer Metadata support is dependent on compression support.
Move the initialization of NVGPU_SUPPORT_BUFFER_METADATA flag to
common code where NVGPU_SUPPORT_COMPRESSION is initialized.
Bug 200780546
Change-Id: Id94bffc878e275a80948880f0475162d0bb4ddae
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2607830
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.fbp has two interfaces to initialize FBP:
1. Public API nvgpu_fbp_init_support
2. HAL fbp.fbp_init_support
nvgpu_fbp_init_support() is only used to initialize HAL
fbp.fbp_init_support. Remove the HAL and use the API directly.
JIRA NVGPU-6644
Change-Id: I2c455e09dbcf5e4fb1dc370b284e4f0d5c678b40
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2592047
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch fixes a bug in the cbc initialization code for ga10b,
where it was erroneously assumed that a fixed ltc count of only one
should be used for historical reasons. For volta and later, the full
ltc count should be used in cbc-related computation.
Ensure
- CBC base address is 64K aligned
- CBC start address lies within CBC allocated memory
Check CBC is marked safe only for silicon platform.
Bug 3353418
Change-Id: I5edee2a78dc9e8c149e111a9f088a57e0154f5c2
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2585778
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
After CONFIG_UBSAN kernel compilation flag to know any shifting
cause overflow or not enablement ,this is identified.
The register "gr_fe_tpc_fs_r(gpc_index)" is read only after
Volta. The gops where we are computing the index is not needed.
Bug 200727116
Change-Id: Ib2306103389ba9df77fd59d012ec70e775104989
Signed-off-by: dt <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2573296
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently reading temperature value depeads on therm pstate
board objects. In absence of pstate reading temperature
from therm get status will be failed which will cause GVS
failure in NvRmGpuTest_Device_GetTemperature test.
This change will add support to read temperature from
therm sensor_00 register but this will have following
limitation:
- NV_THERM_I2CS_SENSOR_00 doesn't support fractional
precision.
- It doesn't support negative temperatures.
BUG-200736830
Signed-off-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Change-Id: I25e577dac9029fcd787a6f71957dbeefd6fe43dd
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2584269
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
There is HW specific limit on number of channel entries that can be
added for each TSG entry in runlist. Right now there is no checking
to enforce this from SW and hence if User binds more than supported
channels to same TSG, invalid TSG formation error interrupts are
generated.
Fix this by adding appropriate checks in below steps :
- Add new field ch_count to struct nvgpu_tsg to keep track of
channels bound to TSG.
- Define new hal gops.runlist.get_max_channels_per_tsg() to retrieve
HW specific maximum channel count per TSG.
- Implement the HAL for gk20a and gv11b chips, and assign new HALs for
all chips appropriately.
- Increment ch_count while binding the channel to TSG and decrement it
while unbinding.
- While binding channel to TSG, Check if current channel count is
already equal to max channel count. If yes, print an error and bail
out.
Bug 200763991
Change-Id: Ic5f17a52e0fb171d1c020bf4f085f57cdb95f923
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2582095
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
ECC counter structures are freed without removing the node from the
stats_list. This can lead to invalid access due to dangling pointers.
Update the ecc counter free logic to set them to NULL upon free, to
remove them from stats_list and free them by validation.
Also updated some of the ecc init paths where error was not propa-
gated to callers and full ecc counters deallocation was not done.
Now, calling unit ecc_free from any context (with counters alloc-
ated or not) is harmless as requisite checks are in place.
bug 3326612
bug 3345977
Change-Id: I05eb6ed226cff9197ad37776912da9dcb7e0716d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2565264
Tested-by: Ashish Mhetre <amhetre@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
- Add gops_fbp_fs and gops_gpc_pg struct
- Add HALs to write to NV_FUSE_CTRL_OPT_FBP and
NV_FUSE_CTRL_OPT_GPC fuses needed for floorsweeping
- Add set_fbp_mask and set_gpc_mask to probe FBP and GPC mask
respectively during gpu probe
- Add sysfs node: fbp_fs_mask and gpc_fs_mask to store
FBP and GPC floorsweeping mask sent from userspace
- Move the floorsweeping programming early in NVGPU’s GPU init
function and then issue a PRI init.
JIRA NVGPU-6433
Change-Id: I84764d625c69914c107e1e8c7f29c476c2f64f78
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2499571
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Enable nvriscv debug buffer feature in NVGPU.
Debug buffer is a feature to print the debug log from ucode onto console
in real time.
Debug buffer feature uses the DMEM, queue and SWGEN1 interrupt to share
ucode debug data with NVGPU.
Ucode writes debug message to DMEM and updates offset in queue to trigger
interrupt to NVGPU.
NVGPU copies the debug message from DMEM to local buffer to process and
print onto console.
Debug buffer feature is added under falcon unit and required engine
can utilize the feature by providing required param through public
functions.
Currently GA10B NVRISCV NS/LS PMU ucode has support for this feature
and enabled support on NVGPU side by adding required changes, with this
feature enabled, it is now possible to see prints in real time.
JIRA NVGPU-6959
Change-Id: I9d46020470285b490b6bc876204f62698055b1ec
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2548951
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Issue observed:
- In GA10B, it was observed that after recovery happens
ELPG does not engage.
- It was because, after CE reset, when nvgpu_submit_twod test
was run to engage ELPG, IDLE_FLIPPED_PWR_OFF signal was asserted.
- This means that when ELPG was engaged (engine is in PWR_OFF),
some idle signal flips (becomes non-idle) and this causes
IDLE_SNAP. After IDLE_SNAP is hit, ELPG will not engage further.
- After debugging from WAVES, it was observed that:
LCE0/LCE1 are not done with the reset sequence.
- The state of these LCE is RESET0. A pri request (pri read
to NV_CE_PCE_MAP register in CE) is seen that kicks it out of
RESET0. After this state, it goes through few states to update
some internal states (states RESET1/RESET2/PCE_MAP etc) and then
eventually settles down to IDLE state.
Solution:
- Read ce_pce_map_r register in recovery sequence (after ce reset).
- It is observed that when this read is added recovery is complete
and post that when nvgpu_submit_two test is executed, ELPG is engaging.
- This means that a pri read is needed after CE reset so that it settles
to idle state properly and post that ELPG can engage properly.
Bug 200734258
Change-Id: I5bb84921ca62a740fde81ffe6c29ccde4ebb341b
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2554493
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
On all chips except ga10b, the number of ROP, L2 units per FBP
were in sync, hence, their FS masks could be represented by a single
fuse register NV_FUSE_STATUS_OPT_ROP_L2_FBP. However, on ga10b, the ROP
unit was moved out from FBP to GPC and it no longer matches the number
of L2 units, so the previous fuse register was broken into two -
NV_FUSE_CTRL_OPT_LTC_FBP, NV_FUSE_CTRL_OPT_ROP_GPC.
At present, the driver reads the NV_FUSE_CTRL_OPT_ROP_GPC register
and reports incorrect L2 mask. Introduce HAL function
ga10b_fuse_status_opt_l2_fbp to fix this.
In addition, rename fields and functions to exclusively fetch L2 masks,
this should help accommadate ga10b and future chips in which L2 and ROP units
are not in same. As part of this, the following functions and
fields have been renamed.
- nvgpu_fbp_get_rop_l2_en_mask => nvgpu_fbp_get_l2_en_mask
- fuse.fuse_status_opt_rop_l2_fbp => fuse.fuse_status_opt_l2_fbp
- nvgpu_fbp.fbp_rop_l2_en_mask => nvgpu_fbp.fbp_l2_en_mask
The HAL ga10b_fuse_status_opt_rop_gpc is removed as rop mask is not
used anywhere in the driver nor exposed to userspace.
Bug 200737717
Bug 200747149
Change-Id: If40fe7ecd1f47c23f7683369a60d8dd686590ca4
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551998
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
