- Remove non-safe TPC powergate feature from the safety
build by introducing a new flag:
CONFIG_NVGPU_TPC_POWERGATE
- Move nvgpu_init_power_gate_gr() under same compile time flag.
and move HAL function gr_gv11b_powergate_tpc() to tpc_gv11b.c
- Also, remove the negative test scenario and
usage of tpc_powergate from unit tests
JIRA NVGPU-4149
Change-Id: If489482401e94de499e472b16b1bc091b00992e6
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2242323
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To enable ecc interrupts early during nvgpu_finalize_poweron, ecc
support has to be enabled early. ecc support was being initialized
together for GR, LTC, PMU, FB units late in the poweron sequence.
Move the ecc init for each unit to respective unit's init functions.
And separate out the hal ecc functions from GR ecc unit to
respective hal units.
JIRA NVGPU-4336
Change-Id: I2c42fb6ba3192dece00be61411c64a56ce16740a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2239153
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This function gets the GPU chip architecture, implementation and
revision information by reading the MC boot register, hence it
is more suited to be located in HAL files.
test_check_gpu_state is now being run after test_hal_init as the
gops.mc needs to be initialized for test_check_gpu_state subtest.
JIRA NVGPU-2524
Change-Id: I85355af11d3505a9eb4f10a3fe4e6d9b56285047
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226018
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a.h will include gops_mc.h to contain the mc ops definitions. Add
doxygen comments for the HAL functions that are called directly.
Also move mc_gp10b_intr_pmu_unit_config to non-fusa HAL file.
JIRA NVGPU-2524
Change-Id: I4f326332d7842211b004b372d79fac9fe6ed40e7
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226017
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The init unit test starts the quiesce feature during testing. This
includes starting the quiesce thread. The thread should be stopped when
the init unit tests complete, so call nvgpu_sw_quiesce_remove_support()
when complete.
Bug 2732985
Change-Id: I701e1dd1ce753781fa81327e3cdc7e2881a33d00
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2224307
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
IRQs can get triggered during nvgpu power-on due to MMU fault, invalid
PRIV ring or bus access etc. Handlers for those IRQs can't access the
full state related to the IRQ unless nvgpu is fully powered on.
In order to let the IRQ handlers know about the nvgpu power-on state
gk20a.power_on_state variable has to be protected through spinlock
to avoid the deadlock due to usage of earlier power_lock mutex.
Further the IRQs need to be disabled on local CPU while updating the
power state variable hence use spin_lock_irqsave and spin_unlock_-
irqrestore APIs for protecting the access.
JIRA NVGPU-1592
Change-Id: If5d1b5e2617ad90a68faa56ff47f62bb3f0b232b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2203860
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
