Use fixed address mapping for pma byte buffer so that the address of
this buffer always fits in 32 bits.
This also requires to move unmap sequence to OS specific function since
different unmap API is now needed for linux and QNX.
Also call nvgpu_prof_free_pma_stream_priv_data() before
nvgpu_profiler_free_pma_stream() since former uses mm->perfbuf which
is released in later.
Bug 2510974
Jira NVGPU-5360
Change-Id: I398b0ca4f96527d6e09c9aacacb4b43c90f5bfc9
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2424691
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Right now PMA byte buffer address is allocated in the range of
0x1ffc010000. The register that stores this address is only 32-bit and
there is no corresponding _hi() register, so the address must fit in
32 bits.
Update nvgpu_vm_init() parameters in nvgpu_perfbuf_init_vm() so that a
low_hole of only 4K is used. This allows the address to be allocated
in the range of 0x4000000.
Also map byte buffer before PMA stream buffer so that byte buffer always
gets lower address.
There is only one PMA stream buffer allowed to be mapped right now so
this works for now. But in future multiple buffers can be mapped and this
solution needs to be reworked.
Bug 2510974
Jira NVGPU-5360
Change-Id: Ief1a9ee54d554e3bc13c7a9567934dcbeaefbcc6
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2418520
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Support new IOCTL to manage PMA stream meta data by adding below API
nvgpu_prof_ioctl_pma_stream_update_get_put()
Add nvgpu_perfbuf_update_get_put() to handle all the updates coming
from userspace and to pass all required information.
Add gops.perf.update_get_put() to handle all HW accesses required in
perf HW unit.
Add gops.perf.bind_mem_bytes_buffer_addr() to bind the available bytes
buffer while binding HWPM streamout.
Bug 2510974
Jira NVGPU-5360
Change-Id: Ibacc2299b845e47776babc081759dfc4afde34fe
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2406484
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add two new IOCTL APIs to allocate/free pma stream. Add two new
functions to handle this :
nvgpu_prof_ioctl_alloc_pma_stream()
nvgpu_prof_ioctl_free_pma_stream()
Allocation of pma stream includes below steps :
- Initializing perfbuf VM
- Mapping PMA buffer into perfbuf VM
- Mapping PMA byte buffer into perfbuf VM
- Mapping PMA byte buffer to CPU virtual address space
Store all of above data in struct nvgpu_profiler_object for
reference. OS specific data is stored in struct
nvgpu_profiler_object_priv
Update HWPM streamout bind/unbind sequence to enable/disable perfbuf
respectively.
Also take care of releasing the pma stream resources in profiler object
close path if they are not explicitly released by user space by IOCTL
call.
Bug 2510974
Jira NVGPU-5360
Change-Id: I126633746cabc4e293c7ad7c49806866a897949d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2406483
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Implement new API nvgpu_prof_ioctl_exec_reg_ops() to support regops on
new profiler objects.
Add two new staging buffers to hold regops copied from userspace, and
to convert and execute regops in common code.
Buffers are allocated and released along with the profiler object.
New API will implements this :
- copy regops data in chunks of 4K from userspace
- store them in staging buffer
- convert the new regop struct into common regop struct and also
copy the content into second staging buffer
- trigger gops.regops.exec_regops() with second staging buffer as
operation pointer
- convert common regop struct back into new regop struct and copy
back to userspace
Export bunch of helper functions from ioctl_dbg.h. e.g.
nvgpu_get_regops_op_values_common()
Update regop execution code to skip regop execution if regop status
is not valid. This is only possible when userspace requests for
CONTINUE_ON_ERROR mode.
Add more documentation to some of the fields in UAPI header.
Note that maximum atomic operations reported by new API are same
as legacy API and are incorrect. This will be fixed up in upcoming
patches.
Bug 2510974
Jira NVGPU-5360
Change-Id: I9f82052b22143aec33f6e778c0784386744b699e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2394208
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new APIs to bind/unbind PM resources to/from profiler objects:
nvgpu_profiler_bind_pm_resources()
nvgpu_profiler_unbind_pm_resources()
Implement support to bind/unbind SMPC/HWPM/HWPM_STREAMOUT in various
functions in common/profiler/profiler.c.
Unbind all the PM resources explicitly in
nvgpu_profiler_unbind_context() while closing the profiler object.
If resources are bound during a resource reservation request,
unbind the resources explicitly before reserving new resource.
It is responsibility of application to bind the PM resources again.
Bug 2510974
Jira NVGPU-5360
Change-Id: Ib2a0e017eaa23d0d376438771e8bf4e340865f03
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2389655
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add two new functions to reserve/release PM resources :
nvgpu_prof_ioctl_reserve_pm_resource()
nvgpu_prof_ioctl_release_pm_resource()
Add ctxsw field to struct nvgpu_profiler_object to store per-resource
context switch enable flag.
Force resource reservation release while unbinding the context from
profiler object or while closing the profiler object. Add this code
in nvgpu_profiler_unbind_context() since both above paths will call
this function.
Bug 2510974
Jira NVGPU-5360
Change-Id: If334148e8df86360fba4162d1611187f3f04d01b
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2389654
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Create new dev nodes for device and context profilers. Example of dev
nodes on iGPU
/dev/nvhost-prof-dev-gpu - device scope profiler
/dev/nvhost-prof-ctx-gpu - context scope profiler
Add below APIs to open/close above dev nodes :
nvgpu_prof_dev_fops_open()
nvgpu_prof_ctx_fops_open()
nvgpu_prof_fops_release()
Add common API nvgpu_prof_fops_ioctl() to handle IOCTL call on these
dev nodes. Add IOCTL NVGPU_PROFILER_IOCTL_BIND_CONTEXT to bind the TSG
to profiler objects.
Add nvgpu_tsg_get_from_file() to retrieve TSG struct pointer from
file descriptor. Also store profiler object pointer into TSG struct.
Enable NVGPU_SUPPORT_PROFILER_V2_DEVICE capability on gv11b and tu104.
Note that this is not yet enabled for vGPU.
Keep NVGPU_SUPPORT_PROFILER_V2_CONTEXT capabiity disabled since this
will take longer to support.
Add new IOCTL NVGPU_PROFILER_IOCTL_UNBIND_CONTEXT so that userspace can
explicitly unbind the context and release the resources before closing
the profiler descriptor.
Add context_init flag to profiler object for book keeping.
Bug 2510974
Jira NVGPU-5360
Change-Id: Ie07e0cfd5a9da9d80008f79c955c7ef93b4bc60f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2384354
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
