Remove MCLK and GPCCLK domain aliases, now that userspace
has swithed to new enumerations.
Jira DNVGPU-211
Change-Id: I2af2fd67dbed47088d7161ba0605e13dd7c674a5
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: http://git-master/r/1292609
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Instead of using Linux APIs for mutex and spinlocks
directly, use new APIs defined in <nvgpu/lock.h>
Replace Linux specific mutex/spinlock declaration,
init, lock, unlock APIs with new APIs
e.g
struct mutex is replaced by struct nvgpu_mutex and
mutex_lock() is replaced by nvgpu_mutex_acquire()
And also include <nvgpu/lock.h> instead of including
<linux/mutex.h> and <linux/spinlock.h>
Add explicit nvgpu/lock.h includes to below
files to fix complilation failures.
gk20a/platform_gk20a.h
include/nvgpu/allocator.h
Jira NVGPU-13
Change-Id: I81a05d21ecdbd90c2076a9f0aefd0e40b215bd33
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1293187
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GPC2CLK has been replaced with GPCCLK on user API.
Remove related definition from kernel API.
GPCLCK and MCLK are currently assigned EQU values in kernel API.
We want to move to a simple enumeration as used in nvrm_gpu.
During the transition, an alias value will be defined for each
clock, and kernel will accept both.
Jira DNVGPU-210
Jira DNVGPU-211
Change-Id: I944fe78be9f810279f7a69964be7cda9b9c8d40d
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: http://git-master/r/1292593
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
If nvgpu_clk_arb_install_fd() gets an error from
nvgpu_clk_notification_queue_alloc(), it fails to free the
nvgpu_clk_dev that it allocated earlier.
Direct the error case to call an appropriate fail label.
Coverity ID 1862040
Change-Id: I1d804d4f5261ec64831938f997f9efc3f2700b60
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1291683
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
The variable indicating the size of the buffer for GPC vf points
was not reset before the query, thus sporadic failures could
happen if the number of available VF points changed on an update
Maximum number of points increased to 256. This is the maximum
that can fit in the boardobj table
bug 200269804
Change-Id: Icb4ae386135a9bb40d4345eb73c5584fecd79147
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1286028
Reviewed-on: http://git-master/r/1287589
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Thomas Fleury <tfleury@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Internally we use GPC2CLK in the arbiter, but we should expose
GPCCLK on kernel API and in user space. Added GPCCLK on the ioctl
API. Arbiter uses GPC2CLK to make queries, then converts to GPCCLK.
Jira DNVGPU-210
Change-Id: Id0b8134d0505c1f9bfd655a08e902bdcd03ebd96
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: http://git-master/r/1280316
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
nvgpu_clk_arb_init_arbiter() allocates master structure arb, and
sub-structures which is assigns as members of arb. At failure,
there's a single error label, and it tries to free the members of
arb without checking that arb was allocated.
Change-Id: Ifac7552b05dad17036835eb3ee624eae351ccb7d
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1279226
GVS: Gerrit_Virtual_Submit
Reviewed-by: Thomas Fleury <tfleury@nvidia.com>
nvgpu_clk_arb_install_fd() leaks dev if it cannot create an fd,
and it leaks both dev and fd if it fails to create a file.
Change-Id: I65c03401dba44d88be543d3aec2fa3fcd2fb0dcc
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1279225
GVS: Gerrit_Virtual_Submit
Reviewed-by: Thomas Fleury <tfleury@nvidia.com>
- update gp106 pg engine init/list/features HALs
to support MS engine
- Added defines & interface for lpwr tables read from vbios.
- lpwr module which reads idx/gr/ms table from vbios to
map rppg/mscg support with respective p-state
- lpwr module public functions to control lpwr
features enable/disable mscg/rppg & mclk-change
request whenever change in mclk-change parameters
- lpwr public functions to know rppg/mscg support for
requested pstate,
- added mutex t prevent PG transition while arbiter
executes pstate transition
- nvgpu_clk_arb_get_current_pstate() of clk arbiter to
get current pstate
JIRA DNVGPU-71
Change-Id: Ifcd640cc19ef630be1e2a9ba07ec84023d8202a0
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: http://git-master/r/1247553
(cherry picked from commit 8a441dea2410e1b5196ef24e56a7768b6980e46b)
Reviewed-on: http://git-master/r/1270989
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
(1) Adding additional debug in case of VF update failure
(2) The length of the tables must be re-initialized
prior to requesting the vf table update
JIRA: DNVGPU-193
Change-Id: Id5a369359bc5f52ee58da539bfc3ec1ec7887de1
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1252061
(cherry picked from commit dfb6fec02f8e3ff6a22bbea000347923b0306018)
Reviewed-on: http://git-master/r/1274547
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
bug 1845211
clfc is reset during vf switch. it resets delta values stored in
pmu structure. if voltage has not changed, delta calculation happens
on top of corrected voltage causing volt to keep on increasing in cases
where voltage does not change during a vf switch.
Change-Id: I9d1a58b6b7652f22c3a7304162bb8ca6f7d1da6f
Signed-off-by: Vijayakumar <vsubbu@nvidia.com>
Reviewed-on: http://git-master/r/1266632
(cherry picked from commit 74e2e97d4d149d3eac65b5f65b358b977fba463e)
Reviewed-on: http://git-master/r/1273911
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
JIRA DNVGPU-175
1)Add functions to be called before and after vf change
2)Capture noise unaware vmin value and pass it as param
to vf change functions
3)Before VF change disable CLFC and update noise unware vmin
4)After VF change is done enable CLFC
Change-Id: I4bb59fbe96ec5a792e8930db3ab4a39ec74c9a71
Signed-off-by: Vijayakumar <vsubbu@nvidia.com>
Reviewed-on: http://git-master/r/1248211
(cherry picked from commit cf07892204d7ce11a0d27ecbc1f5826fbabbde61)
Reviewed-on: http://git-master/r/1270950
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
bug 200254784
If XBAR and SYS clocks for a given GPC clock point is lower
than minimum value mentioned in P state set the floor to
minimum value mentioned in p state. it was set to value
based ratio of a GPC clk value in VF table which can give
value higher than one mentioned in p state. Ignore ratio
and just set to p state value
Change-Id: I9f7cd1d5842d057aff6d8243a31ab503ce35a8ca
Signed-off-by: Vijayakumar <vsubbu@nvidia.com>
Reviewed-on: http://git-master/r/1257251
Reviewed-by: Automatic_Commit_Validation_User
(cherry picked from commit 5798680286967ff999f674bedd4fc0411615f914)
Reviewed-on: http://git-master/r/1270949
GVS: Gerrit_Virtual_Submit
Modification of the ARBITER clocks to be P-State aware
Up to now the arbiter just considered the whole range
of the GPC and MCLK domains, which could end up on
illegal combinations of MCLK, GPC2CLK, and set the
SYSCLK and XBARCLK domains below their minimum VCO
The following has been implemented:
(1) Modified VF tables to add which PState are
supported on each point.
(2) Return and store the current PState on the
arbiter state.
(3) Modified logic to prevent illegal combinations of
MCLK and GPC2CLK.
(4) Modified logic to prevent setting VF points for
XBAR and SYS domains below VCO limits.
(5) Modified voltage calculation to account for increased
values of XBAR and SYS on some VF points.
(6) Modified arbiter clock target logic to prevent an
application that has not requested a particular VF point
to set target to default targets.
(7) Remove unnecesary mutexes from critical path
JIRA DNVGPU-182
JIRA DNVGPU-183
Change-Id: I3d1c30903278f848681b8da833a867835acc99bb
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1247937
(cherry picked from commit b8bcc07eb3b5b70ec1ee19ace237df99d6170138)
Reviewed-on: http://git-master/r/1268063
Tested-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
The current code can lead to application hang when
opening device on first time if the arbiter fails
to set the clocks
Also it solves a buffer overrun condition in case
the requested frequency is above the maximum range
of the VF curve
bug 1835042
Change-Id: I385401ea27d5cc4bfa41b7ca2eb3a1db53138418
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1245911
Reviewed-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1268061
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Modification of the arbiter to remove all locking
from the arbiter callback and move the callbacks
out of the global queue
Adding modification to call for updated values of
vf table from arbiter init function and on
vf table update
JIRA: DNVGPU-170
Change-Id: I7a7d34c0590522901e06356c06fd8114ebf10f37
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1243212
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-on: http://git-master/r/1268009
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
(1) modified counters debug code to export to the driver
(2) modified arbiter to read from those functions
(3) modified counter for higher accuracy on MHz range
JIRA DNVGPU-164
Change-Id: I2bbf7c9be4dc59718d1d91c53028a39020b5aea5
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1239467
GVS: Gerrit_Virtual_Submit
Reviewed-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1268008
JIRA DNVGPU-143
The arbiter is charged with selecting the proper
frequencies when multiple applications submit
simultaneously clock change requests
On the current implementation, the arbiter guarantees
that the selected frequency will be always higher
or equal to the request, as long as the request is
in range.
The current code is not yet realtime friendly, as
requests are not pre-allocated.
Summary of changes:
(1) pstate/vf switch no longer selects boot frequency
(2) changed mclk code change to accept input freq
(3) added arbiter
(4) now a single session can submit concurrent requests
the last request is the one that applies for that
session
(5) modified locking mechanism to reduce lock contention
(6) Added callback to notify the arbiter that the VF
table has changed and is no longer valid (PMU/Thermals
must call this when VF table is invalid)
(7) changed internal API to work with MHz
(8) added debugfs for stats
Change-Id: I6a7b05c9447761e8536f84ef86b5ab0793164d63
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1239461
Reviewed-by: Thomas Fleury <tfleury@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1267120
Reviewed-by: Automatic_Commit_Validation_User
Install one completion fd per SET request.
Notifications on dedicated event fd.
Changed frequencies unit to Hz from MHz.
Remove sequence numbers from dummy arbiter.
Added effective clock type (query frequency from counters).
Jira DNVGPU-125
Change-Id: Id5445c6ae1d6bf06f7f59c82ff6c5d3b34e26483
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: http://git-master/r/1230239
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
(cherry picked from commit d17083f4ceb69725c661678607a3e43148d38560)
Reviewed-on: http://git-master/r/1243106
Add clock arbiter skeleton with support of clock sessions,
notifications on clock changes, request numbering, and asynchronous
handling of clock requests. Provides minimum behaviour to allow
unit tests implementation. Actual arbitration and clock settings
will be done separately. For now, dummy arbiter keeps last
requested target mhz. Actual arbiter may move to a lockless
implementation.
Jira DNVGPU-125
Change-Id: I6a8e443fb0d15dc5f1993e7260256d71acddd106
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: http://git-master/r/1223476
(cherry picked from commit cb130825d84e4124d273bd443e2b62d493377461)
Reviewed-on: http://git-master/r/1243105
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
