Files
linux-nvgpu/drivers/gpu/nvgpu/Makefile.linux.configs
Tejal Kudav 31b2738f6a gpu: nvgpu: Add Epl Init
EPL lib constructor is replaced by NvEplInit() by safety services.
NvGPU, being an EPL user, needs to call NvEplInit before using EPL
API to report errors.
NvEplInit() usage is limited to user space in Linux, so NvGPU is not
expected to call NvEplInit on Linux.

Bug 3863536

Change-Id: I7fc9b33d3443bd39a6367a0c691bddb80b9edb68
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2817245
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
2022-12-15 20:55:54 -08:00

333 lines
8.5 KiB
Makefile

# Turn off all other configs, if CONFIG_GK20A is not set
CONFIG_GK20A := m
# Enable the nv_sched build.
CONFIG_NVS_PRESENT := y
CONFIG_KMD_SCHEDULING_WORKER_THREAD := y
# Enable GK20A PMU features.
CONFIG_GK20A_PMU := y
# Enable support for the GK20A graphics engine on Tegra
# by adding a Tegra platfrom interface to the GK20A driver.
CONFIG_TEGRA_GK20A := y
# Enable Support for Loading High Secure binary, and using
# Write Protected Regions (WPR) for storing ucodes, and bootstrap
# PMU, FECS and GPCCS in Low Secure mode.
CONFIG_TEGRA_ACR := y
# Support for debugger APIs
CONFIG_NVGPU_DEBUGGER := y
# Support for Falcon debugger APIs
CONFIG_NVGPU_FALCON_DEBUG := y
# Support for iGPU LS PMU enable/disable
CONFIG_NVGPU_LS_PMU := y
# Enable/Disable NVGPU logging
CONFIG_NVGPU_LOGGING := y
# Enable/Disable the support of HALs from chips that do not have functional
# safety certification
CONFIG_NVGPU_HAL_NON_FUSA := y
# Support recovery on failure (which may involve engine reset)
CONFIG_NVGPU_RECOVERY := y
# Support for compression
CONFIG_NVGPU_COMPRESSION := y
# Enable MIG Support
CONFIG_NVGPU_MIG := y
# Enable gv11b support
CONFIG_NVGPU_SUPPORT_GV11B := y
# Set config for OOT module build
ifeq ($(CONFIG_TEGRA_OOT_MODULE),m)
CONFIG_TEGRA_HOST1X_NEXT := m
CONFIG_TEGRA_NVMAP_NEXT := m
endif
# Enable support for extraction of comptags for CDE.
ifeq ($(CONFIG_NVGPU_COMPRESSION),y)
CONFIG_NVGPU_SUPPORT_CDE := y
endif
# Support for remap
CONFIG_NVGPU_REMAP := y
# Enable gsp scheduler support
CONFIG_NVGPU_GSP_SCHEDULER := y
#Enable stress test for GSP
ifeq ($(CONFIG_NVGPU_GSP_SCHEDULER),y)
CONFIG_NVGPU_GSP_STRESS_TEST := y
endif
ifeq ($(CONFIG_COMMON_CLK),y)
ifeq ($(CONFIG_PM_DEVFREQ),y)
# Select this entry to enable gk20a scaling
CONFIG_GK20A_DEVFREQ := y
# Enable support to pass PM_QOS constraints to devfreq based scaling.
CONFIG_GK20A_PM_QOS := y
endif
endif
# Say Y here to allow nvgpu to track and keep statistics on
# the system memory used by the driver. This does recreate
# some of the kmem_leak tracking but this is also applicable
# to other OSes which do not have Linux' kmem_leak.
#CONFIG_NVGPU_TRACK_MEM_USAGE := n
# Enable the cycle stats debugging features.
CONFIG_NVGPU_CYCLESTATS := y
# Enable support for the NVGPU Context Switch Tracing. In this mode,
# FECS collects timestamps for contexts loaded on GR engine. This
# allows tracking context switches on GR engine, as well as
# identifying processes that submitted work.
CONFIG_NVGPU_FECS_TRACE := y
# Enable support in GK20A for the nvhost (host1x) dma engine hardware
# that includes things like hardware syncpts. This requires
# TEGRA_GRHOST
ifdef CONFIG_TEGRA_GRHOST
CONFIG_TEGRA_GK20A_NVHOST := y
endif
ifdef CONFIG_TEGRA_HOST1X_NEXT
CONFIG_TEGRA_GK20A_NVHOST := y
CONFIG_TEGRA_GK20A_NVHOST_HOST1X := y
endif
ifdef CONFIG_TEGRA_NVMAP_NEXT
CONFIG_NVGPU_NVMAP_NEXT := y
endif
CONFIG_NVGPU_ENABLE_MISC_EC := n
ifdef CONFIG_TEGRA_EPL
CONFIG_NVGPU_ENABLE_MISC_EC := y
endif
CONFIG_NVGPU_NVMEM_FUSE := n
ifneq ($(findstring 5.10,$(NV_BUILD_KERNEL_OPTIONS)),)
CONFIG_NVGPU_NVMAP_NEXT := y
CONFIG_NVGPU_NVMEM_FUSE := y
endif
CONFIG_NVGPU_IVM_BUILD := y
# Set config for OOT module build
ifeq ($(CONFIG_TEGRA_OOT_MODULE),m)
CONFIG_NVGPU_NVMEM_FUSE := y
endif
# Enable support for GPUs on PCIe bus.
ifeq ($(CONFIG_PCI),y)
# Support for NVGPU DGPU
CONFIG_NVGPU_DGPU := y
endif
# Enable nvgpu debug facility to redirect debug spew to ftrace. This
# affects kernel memory use, so should not be enabled by default.
ifeq ($(CONFIG_TRACING),y)
#CONFIG_GK20A_TRACE_PRINTK := y
endif
# Use __alloc_fd() to allocate the fds above 1024 for vidmem dmabufs
# This exempts from counting against process fd limit.
ifeq ($(CONFIG_NVGPU_DGPU),y)
ifneq ($(findstring 5.10,$(NV_BUILD_KERNEL_OPTIONS)),)
CONFIG_NVGPU_IGNORE_PROCESS_FD_LIMIT := y
endif
endif
# Support Nvlink
ifeq ($(CONFIG_TEGRA_NVLINK),y)
CONFIG_NVGPU_NVLINK := y
endif
# Support NVGPU Virtualization
ifeq ($(CONFIG_TEGRA_GR_VIRTUALIZATION),y)
CONFIG_NVGPU_GR_VIRTUALIZATION := y
endif
CONFIG_NVGPU_VPR := y
# Support Tegra fuse
ifeq ($(CONFIG_TEGRA_KFUSE),y)
CONFIG_NVGPU_TEGRA_FUSE := y
endif
# GPU job synchronization (fences before and after submits) can use raw
# syncpoints if available and sync fds if chosen. Without syncpoints,
# nvgpu also provides semaphore-backed sync fds to userspace.
#
# Select which kernel-provided API is used for sync fds. Matching
# support is required for the userspace drivers too.
ifeq ($(CONFIG_SYNC),y)
CONFIG_NVGPU_SYNCFD_ANDROID := y
else ifeq ($(CONFIG_SYNC_FILE), y)
CONFIG_NVGPU_SYNCFD_STABLE := y
else
CONFIG_NVGPU_SYNCFD_NONE := y
endif
# Below check indicates the build is invoked from Nvidia's
# internal build system.
ifneq ($(NV_BUILD_KERNEL_OPTIONS),)
ifeq ($(NV_BUILD_CONFIGURATION_VARIANT_IS_EMBEDDED),1)
CONFIG_NVS_ROUND_ROBIN_SCHEDULER_DISABLE := y
ccflags-y += -DCONFIG_NVS_ROUND_ROBIN_SCHEDULER_DISABLE
endif
endif
# Set config for OOT module build
ifeq ($(CONFIG_TEGRA_OOT_MODULE),m)
CONFIG_GK20A_DEVFREQ := y
endif
# Set config FUSE_UPSTREAM for OOT for enabling some soc related APIs.
ifeq ($(CONFIG_TEGRA_OOT_MODULE),m)
CONFIG_TEGRA_FUSE_UPSTREAM := y
ccflags-y += -DCONFIG_TEGRA_FUSE_UPSTREAM
endif
ifeq ($(CONFIG_TEGRA_HSIERRRPTINJ),y)
ifeq ($(CONFIG_NVGPU_ENABLE_MISC_EC),y)
CONFIG_NVGPU_FSI_ERR_INJECTION := y
endif
endif
CONFIG_NVGPU_TSG_SHARING := y
CONFIG_NVGPU_EPL_INIT := n
ifeq ($(CONFIG_GK20A_PMU),y)
ccflags-y += -DCONFIG_GK20A_PMU
endif
ifeq ($(CONFIG_TEGRA_GK20A),y)
ccflags-y += -DCONFIG_TEGRA_GK20A
endif
ifeq ($(CONFIG_TEGRA_ACR),y)
ccflags-y += -DCONFIG_TEGRA_ACR
endif
ifeq ($(CONFIG_NVGPU_DEBUGGER),y)
ccflags-y += -DCONFIG_NVGPU_DEBUGGER
endif
ifeq ($(CONFIG_NVGPU_FALCON_DEBUG),y)
ccflags-y += -DCONFIG_NVGPU_FALCON_DEBUG
endif
ifeq ($(CONFIG_NVGPU_LS_PMU),y)
ccflags-y += -DCONFIG_NVGPU_LS_PMU
endif
ifeq ($(CONFIG_NVGPU_LOGGING),y)
ccflags-y += -DCONFIG_NVGPU_LOGGING
endif
ifeq ($(CONFIG_NVGPU_HAL_NON_FUSA),y)
ccflags-y += -DCONFIG_NVGPU_HAL_NON_FUSA
endif
ifeq ($(CONFIG_NVGPU_RECOVERY),y)
ccflags-y += -DCONFIG_NVGPU_RECOVERY
endif
ifeq ($(CONFIG_NVGPU_COMPRESSION),y)
ccflags-y += -DCONFIG_NVGPU_COMPRESSION
endif
ifeq ($(CONFIG_NVGPU_SUPPORT_GV11B),y)
ccflags-y += -DCONFIG_NVGPU_SUPPORT_GV11B
endif
ifeq ($(CONFIG_NVGPU_REMAP),y)
ccflags-y += -DCONFIG_NVGPU_REMAP
endif
ifeq ($(CONFIG_NVGPU_SUPPORT_CDE),y)
ccflags-y += -DCONFIG_NVGPU_SUPPORT_CDE
endif
ifeq ($(CONFIG_GK20A_DEVFREQ),y)
ccflags-y += -DCONFIG_GK20A_DEVFREQ
endif
ifeq ($(CONFIG_GK20A_PM_QOS),y)
ccflags-y += -DCONFIG_GK20A_PM_QOS
endif
ifeq ($(CONFIG_NVGPU_TRACK_MEM_USAGE),y)
ccflags-y += -DCONFIG_NVGPU_TRACK_MEM_USAGE
endif
ifeq ($(CONFIG_NVGPU_CYCLESTATS),y)
ccflags-y += -DCONFIG_NVGPU_CYCLESTATS
endif
ifeq ($(CONFIG_NVGPU_FECS_TRACE),y)
ccflags-y += -DCONFIG_NVGPU_FECS_TRACE
endif
ifeq ($(CONFIG_TEGRA_GK20A_NVHOST),y)
ccflags-y += -DCONFIG_TEGRA_GK20A_NVHOST
endif
ifeq ($(CONFIG_TEGRA_GK20A_NVHOST_HOST1X),y)
ccflags-y += -DCONFIG_TEGRA_GK20A_NVHOST_HOST1X
endif
ifeq ($(CONFIG_NVGPU_NVMEM_FUSE),y)
ccflags-y += -DCONFIG_NVGPU_NVMEM_FUSE
endif
ifeq ($(CONFIG_NVGPU_NVMAP_NEXT),y)
ccflags-y += -DCONFIG_NVGPU_NVMAP_NEXT
endif
ifeq ($(CONFIG_NVGPU_DGPU),y)
ccflags-y += -DCONFIG_NVGPU_DGPU
endif
ifeq ($(CONFIG_GK20A_TRACE_PRINTK),y)
ccflags-y += -DCONFIG_GK20A_TRACE_PRINTK
endif
ifeq ($(CONFIG_NVGPU_USE_TEGRA_ALLOC_FD),y)
ccflags-y += -DCONFIG_NVGPU_USE_TEGRA_ALLOC_FD
endif
ifeq ($(CONFIG_NVGPU_NVLINK),y)
ccflags-y += -DCONFIG_NVGPU_NVLINK
endif
ifeq ($(CONFIG_NVGPU_GR_VIRTUALIZATION),y)
ccflags-y += -DCONFIG_NVGPU_GR_VIRTUALIZATION
endif
ifeq ($(CONFIG_NVGPU_VPR),y)
ccflags-y += -DCONFIG_NVGPU_VPR
endif
ifeq ($(CONFIG_NVGPU_TEGRA_FUSE),y)
ccflags-y += -DCONFIG_NVGPU_TEGRA_FUSE
endif
ifeq ($(CONFIG_NVGPU_SYNCFD_ANDROID),y)
ccflags-y += -DCONFIG_NVGPU_SYNCFD_ANDROID
endif
ifeq ($(CONFIG_NVGPU_SYNCFD_STABLE),y)
ccflags-y += -DCONFIG_NVGPU_SYNCFD_STABLE
endif
ifeq ($(CONFIG_NVGPU_SYNCFD_NONE),y)
ccflags-y += -DCONFIG_NVGPU_SYNCFD_NONE
endif
ifeq ($(CONFIG_NVGPU_GSP_SCHEDULER),y)
ccflags-y += -DCONFIG_NVGPU_GSP_SCHEDULER
endif
ifeq ($(CONFIG_NVGPU_GSP_STRESS_TEST),y)
ccflags-y += -DCONFIG_NVGPU_GSP_STRESS_TEST
endif
ifeq ($(CONFIG_NVS_PRESENT),y)
ccflags-y += -DCONFIG_NVS_PRESENT
endif
ifeq ($(CONFIG_KMD_SCHEDULING_WORKER_THREAD),y)
ccflags-y += -DCONFIG_KMD_SCHEDULING_WORKER_THREAD
endif
ifeq ($(CONFIG_NVGPU_IVM_BUILD),y)
ccflags-y += -DCONFIG_NVGPU_IVM_BUILD
endif
ifeq ($(CONFIG_NVGPU_ENABLE_MISC_EC),y)
ccflags-y += -DCONFIG_NVGPU_ENABLE_MISC_EC
endif
ifeq ($(CONFIG_NVGPU_FSI_ERR_INJECTION),y)
ccflags-y += -DCONFIG_NVGPU_FSI_ERR_INJECTION
endif
ifeq ($(CONFIG_NVGPU_TSG_SHARING),y)
ccflags-y += -DCONFIG_NVGPU_TSG_SHARING
endif