mirror of
git://nv-tegra.nvidia.com/linux-nvgpu.git
synced 2025-12-24 10:34:43 +03:00
3d9c67a0e7
Most of the Orin chip specific code is compiled out of safety build with CONFIG_NVGPU_NON_FUSA and CONFIG_NVGPU_HAL_NON_FUSA. Remove the config protection from Orin/GA10B specific code. Currently all code is enabled. Code not required in safety will be compiled out later in separate activity. Other noteworthy changes in this patch related to safety build: - In ga10b_ce_request_idle(), add a log print to dump num_pce so that compiler does not complain about unused variable num_pce. - In ga10b_fifo_ctxsw_timeout_isr(), protect variables active_eng_id and recover under CONFIG_NVGPU_KERNEL_MODE_SUBMIT to fix compilation errors of unused variables. - Compile out HAL gops.pbdma.force_ce_split() from safety since this HAL is GA100 specific and not required for GA10B. - Compile out gr_ga100_process_context_buffer_priv_segment() with CONFIG_NVGPU_DEBUGGER. - Compile out VAB support with CONFIG_NVGPU_HAL_NON_FUSA. - In ga10b_gr_intr_handle_sw_method(), protect left_shift_by_2 variable with appropriate configs to fix unused variable compilation error. - In ga10b_intr_isr_stall_host2soc_3(), compile ELPG function calls with CONFIG_NVGPU_POWER_PG. - In ga10b_pmu_handle_swgen1_irq(), move whole function body under CONFIG_NVGPU_FALCON_DEBUG to fix unused variable compilation errors. - Add below TU104 specific files in safety build since some of the code in those files is required for GA10B. Unnecessary code will be compiled out later on. hal/gr/init/gr_init_tu104.c hal/class/class_tu104.c hal/mc/mc_tu104.c hal/fifo/usermode_tu104.c hal/gr/falcon/gr_falcon_tu104.c - Compile out GA10B specific debugger/profiler related files from safety build. - Disable CONFIG_NVGPU_FALCON_DEBUG from safety debug build temporarily to work around compilation errors seen with keeping this config enabled. Config will be re-enabled in safety debug build later. Jira NVGPU-7276 Change-Id: I35f2489830ac083d52504ca411c3f1d96e72fc48 Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2627048 Tested-by: mobile promotions <svcmobile_promotions@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
329 lines
11 KiB
Makefile
329 lines
11 KiB
Makefile
#
|
|
# Copyright (c) 2019-2021, NVIDIA CORPORATION. All rights reserved.
|
|
#
|
|
# Permission is hereby granted, free of charge, to any person obtaining a
|
|
# copy of this software and associated documentation files (the "Software"),
|
|
# to deal in the Software without restriction, including without limitation
|
|
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
# and/or sell copies of the Software, and to permit persons to whom the
|
|
# Software is furnished to do so, subject to the following conditions:
|
|
#
|
|
# The above copyright notice and this permission notice shall be included in
|
|
# all copies or substantial portions of the Software.
|
|
#
|
|
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
|
|
# DEALINGS IN THE SOFTWARE.
|
|
#
|
|
|
|
# This file defines the make variables and cflags applicable to nvgpu common
|
|
# shared by qnx, nvgpu userspace, test builds. Note that cflags are added to
|
|
# variable NVGPU_COMMON_CFLAGS that needs to be used by the parent Makefile
|
|
# to update corresponding cflags variable.
|
|
|
|
# Default is the regular profile. That can be overridden if necessary. by
|
|
# setting the NVGPU_FORCE_SAFETY_PROFILE. This is a useful hack while we
|
|
# wait for the userspace tmake build to make its way into a proper safety
|
|
# profile build.
|
|
profile := default
|
|
|
|
# Decide whether to use the safety release, safety debug or the regular profile.
|
|
ifeq ($(NV_BUILD_CONFIGURATION_IS_SAFETY),1)
|
|
profile := safety_release
|
|
ifeq ($(NV_BUILD_CONFIGURATION_IS_DEBUG),1)
|
|
profile := safety_debug
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(NVGPU_FORCE_SAFETY_PROFILE),1)
|
|
profile := safety_release
|
|
ifeq ($(NVGPU_FORCE_DEBUG_PROFILE),1)
|
|
profile := safety_debug
|
|
endif
|
|
endif
|
|
|
|
NVGPU_COMMON_CFLAGS :=
|
|
|
|
#
|
|
# Flags always enabled regardless of build profile.
|
|
#
|
|
|
|
NVGPU_COMMON_CFLAGS += \
|
|
-DCONFIG_TEGRA_GK20A_PMU=1 \
|
|
-DCONFIG_TEGRA_ACR=1 \
|
|
-DCONFIG_NVGPU_GR_VIRTUALIZATION \
|
|
-DCONFIG_PCI_MSI
|
|
|
|
CONFIG_NVGPU_LOGGING := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_LOGGING
|
|
|
|
# Syncpoint support provided by nvhost is expected to exist.
|
|
CONFIG_TEGRA_GK20A_NVHOST := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_TEGRA_GK20A_NVHOST
|
|
|
|
# Syncfds are a Linux feature.
|
|
CONFIG_NVGPU_SYNCFD_NONE := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_SYNCFD_NONE
|
|
|
|
CONFIG_NVGPU_GRAPHICS := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_GRAPHICS
|
|
|
|
ifeq ($(profile),$(filter $(profile),safety_debug safety_release))
|
|
|
|
# Enable golden context verification only for safety debug/release build
|
|
NVGPU_COMMON_CFLAGS += \
|
|
-DCONFIG_NVGPU_GR_GOLDEN_CTX_VERIFICATION \
|
|
-DCONFIG_NVGPU_BUILD_CONFIGURATION_IS_SAFETY
|
|
|
|
## For tesing of CTXSW FW error codes manually, enable below configs in safety build.
|
|
## Enable only one config at a time, because only one error can be tested at a time.
|
|
# NVGPU_COMMON_CFLAGS += \
|
|
# -DCONFIG_NVGPU_CTXSW_FW_ERROR_WDT_TESTING
|
|
#
|
|
# NVGPU_COMMON_CFLAGS += \
|
|
# -DCONFIG_NVGPU_CTXSW_FW_ERROR_CODE_TESTING
|
|
#
|
|
# NVGPU_COMMON_CFLAGS += \
|
|
# -DCONFIG_NVGPU_CTXSW_FW_ERROR_HEADER_TESTING
|
|
|
|
ifeq ($(CONFIG_NVGPU_DGPU),1)
|
|
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_DGPU
|
|
|
|
CONFIG_NVGPU_NVLINK := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_NVLINK
|
|
|
|
# used by sec2 code
|
|
CONFIG_NVGPU_ENGINE_QUEUE := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_ENGINE_QUEUE
|
|
|
|
# used in ce_app
|
|
CONFIG_NVGPU_FENCE := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_FENCE
|
|
|
|
# ce_app uses syncpt (nvgpu_nvhost_syncpt_wait_timeout_ext)
|
|
CONFIG_NVGPU_KERNEL_MODE_SUBMIT := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_KERNEL_MODE_SUBMIT
|
|
|
|
CONFIG_NVGPU_FALCON_NON_FUSA := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_FALCON_NON_FUSA
|
|
|
|
CONFIG_NVGPU_FALCON_DEBUG := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_FALCON_DEBUG
|
|
|
|
CONFIG_NVGPU_GR_FALCON_NON_SECURE_BOOT := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_GR_FALCON_NON_SECURE_BOOT
|
|
|
|
CONFIG_NVGPU_SM_DIVERSITY := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_SM_DIVERSITY
|
|
|
|
CONFIG_NVGPU_USE_3LSS_ERR_INJECTION := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_USE_3LSS_ERR_INJECTION
|
|
|
|
CONFIG_NVGPU_LS_PMU := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_LS_PMU
|
|
|
|
CONFIG_NVGPU_CLK_ARB := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_CLK_ARB
|
|
endif
|
|
|
|
endif
|
|
|
|
CONFIG_NVGPU_TEGRA_FUSE := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_TEGRA_FUSE
|
|
|
|
#
|
|
# Flags enabled only for safety debug and regular build profile.
|
|
#
|
|
ifneq ($(profile),safety_release)
|
|
|
|
CONFIG_NVGPU_TRACE := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_TRACE
|
|
|
|
#
|
|
# Flags enabled only for regular build profile.
|
|
#
|
|
ifneq ($(profile),safety_debug)
|
|
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_FALCON_DEBUG
|
|
|
|
CONFIG_NVGPU_SYSFS := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_SYSFS
|
|
|
|
# ACR feature to enable old tegra ACR profile support
|
|
CONFIG_NVGPU_ACR_LEGACY := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_ACR_LEGACY
|
|
|
|
CONFIG_NVGPU_ENGINE_QUEUE := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_ENGINE_QUEUE
|
|
|
|
CONFIG_NVGPU_DEBUGGER := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_DEBUGGER
|
|
|
|
CONFIG_NVGPU_PROFILER := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_PROFILER
|
|
|
|
CONFIG_NVGPU_RECOVERY := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_RECOVERY
|
|
|
|
CONFIG_NVGPU_CILP := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_CILP
|
|
|
|
CONFIG_NVGPU_GFXP := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_GFXP
|
|
|
|
CONFIG_NVGPU_CYCLESTATS := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_CYCLESTATS
|
|
|
|
CONFIG_NVGPU_FECS_TRACE := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_FECS_TRACE
|
|
|
|
ifneq ($(CONFIG_NVGPU_DGPU),1)
|
|
CONFIG_NVGPU_IGPU_VIRT := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_IGPU_VIRT
|
|
endif
|
|
|
|
# Enable the usage of 3LSS error injection features.
|
|
CONFIG_NVGPU_USE_3LSS_ERR_INJECTION := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_USE_3LSS_ERR_INJECTION
|
|
|
|
# Enable nvlink support for normal build.
|
|
CONFIG_NVGPU_NVLINK := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_NVLINK
|
|
|
|
# Enable static_powergate support for normal build.
|
|
CONFIG_NVGPU_STATIC_POWERGATE := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_STATIC_POWERGATE
|
|
|
|
# Enable mssnvlink0 reset control for normal build
|
|
CONFIG_MSSNVLINK0_RST_CONTROL := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_MSSNVLINK0_RST_CONTROL
|
|
|
|
# Enable dgpu support for normal build.
|
|
CONFIG_NVGPU_DGPU := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_DGPU
|
|
|
|
CONFIG_NVGPU_VPR := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_VPR
|
|
|
|
CONFIG_NVGPU_REPLAYABLE_FAULT := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_REPLAYABLE_FAULT
|
|
|
|
CONFIG_NVGPU_FALCON_DEBUG := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_FALCON_DEBUG
|
|
|
|
# Enable LS PMU support for normal build
|
|
CONFIG_NVGPU_LS_PMU := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_LS_PMU
|
|
|
|
# Enable elpg support for normal build
|
|
CONFIG_NVGPU_POWER_PG := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_POWER_PG
|
|
|
|
# Enable sim support for normal build
|
|
CONFIG_NVGPU_SIM := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_SIM
|
|
|
|
CONFIG_NVGPU_COMPRESSION := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_COMPRESSION
|
|
|
|
# Enable non FUSA HALs for normal build
|
|
CONFIG_NVGPU_HAL_NON_FUSA := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_HAL_NON_FUSA
|
|
|
|
# Enable non FUSA common code for normal build
|
|
CONFIG_NVGPU_NON_FUSA := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_NON_FUSA
|
|
|
|
CONFIG_NVGPU_CLK_ARB := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_CLK_ARB
|
|
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_FALCON_NON_FUSA
|
|
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_IOCTL_NON_FUSA
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_DETERMINISTIC_CHANNELS
|
|
|
|
CONFIG_NVGPU_GR_FALCON_NON_SECURE_BOOT := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_GR_FALCON_NON_SECURE_BOOT
|
|
|
|
CONFIG_NVGPU_SET_FALCON_ACCESS_MAP := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_SET_FALCON_ACCESS_MAP
|
|
|
|
# Enable SW Semaphore for normal build
|
|
CONFIG_NVGPU_SW_SEMAPHORE := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_SW_SEMAPHORE
|
|
|
|
# Enable Channel WDT for safety build until we switch to user mode submits only
|
|
CONFIG_NVGPU_CHANNEL_WDT := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_CHANNEL_WDT
|
|
|
|
# Enable Kernel Mode submit for safety build until we switch to user mode
|
|
# submits only
|
|
CONFIG_NVGPU_KERNEL_MODE_SUBMIT := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_KERNEL_MODE_SUBMIT
|
|
|
|
# Enable fences for safety build till until we switch to user mode submits only
|
|
CONFIG_NVGPU_FENCE := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_FENCE
|
|
|
|
# Enable powergate lib for normal build
|
|
CONFIG_NVGPU_USE_POWERGATE_LIB := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_USE_POWERGATE_LIB
|
|
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_FIFO_ENGINE_ACTIVITY
|
|
# Enable dynamic busy/idle support
|
|
CONFIG_NVGPU_DYNAMIC_BUSY_IDLE_SUPPORT := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_DYNAMIC_BUSY_IDLE_SUPPORT
|
|
|
|
# Enable HW based error injection support
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_INJECT_HWERR
|
|
|
|
# Enable Channel/TSG Scheduling
|
|
CONFIG_NVGPU_CHANNEL_TSG_SCHEDULING := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_CHANNEL_TSG_SCHEDULING
|
|
|
|
# Enable Channel/TSG Control
|
|
CONFIG_NVGPU_CHANNEL_TSG_CONTROL := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_CHANNEL_TSG_CONTROL
|
|
|
|
# Enable Virtualization server for normal build
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_TEGRA_GR_VIRTUALIZATION_SERVER
|
|
|
|
# Enable SM diversity support for normal build
|
|
CONFIG_NVGPU_SM_DIVERSITY := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_SM_DIVERSITY
|
|
|
|
# Enable Multi Instance GPU support for normal build
|
|
CONFIG_NVGPU_MIG := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_MIG
|
|
|
|
# Enable gsp scheduler for normal build
|
|
CONFIG_NVGPU_GSP_SCHEDULER......:= 1
|
|
NVGPU_COMMON_CFLAGS.............+= -DCONFIG_NVGPU_GSP_SCHEDULER
|
|
|
|
# Enable GSP stress test
|
|
ifeq ($(CONFIG_NVGPU_GSP_SCHEDULER),1)
|
|
CONFIG_NVGPU_GSP_STRESS_TEST := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_GSP_STRESS_TEST
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
# Enable USERD only if kernel mode submit is supported
|
|
ifeq ($(CONFIG_NVGPU_KERNEL_MODE_SUBMIT),1)
|
|
CONFIG_NVGPU_USERD := 1
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_USERD
|
|
endif
|
|
|
|
ifeq ($(CONFIG_NVGPU_DEBUGGER),1)
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_ENGINE_RESET
|
|
endif
|
|
|
|
ifeq ($(CONFIG_NVGPU_RECOVERY),1)
|
|
NVGPU_COMMON_CFLAGS += -DCONFIG_NVGPU_ENGINE_RESET
|
|
endif
|