tegra234: sync DTS file tegra234-p3737-0000+p3701-0000 with mainline

Sync the base DTS file tegra234-p3737-0000+p3701-0000.dts to mainlne.
Following are changes:
- Add serial1 alias.
- Add reset-names on serial1.
- Add extra lines before node in i2c@c240000 to match
  with mainline.

Bug 4037899

Change-Id: I09cc3efef053dddd5334e7155010f93f09655847
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/device/hardware/nvidia/t23x-public-dts/+/2945465
(cherry picked from commit d8f331d2c7)
Reviewed-on: https://git-master.nvidia.com/r/c/device/hardware/nvidia/t23x-public-dts/+/2955805
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>

tegra234-p3737-0000+p3701-0000.dts

@@ -14,6 +14,7 @@
 	aliases {
 		mmc3 = "/bus@0/mmc@3460000";
 		serial0 = &tcu;
+		serial1 = &uarta;
 	};
 
 	chosen {
@@ -24,6 +25,7 @@
 	bus@0 {
 		serial@3100000 {
 			compatible = "nvidia,tegra194-hsuart";
+			reset-names = "serial";
 			status = "okay";
 		};
 
@@ -171,6 +173,7 @@
 
 		i2c@c240000 {
 			status = "okay";
+
 			typec@8 {
 				compatible = "cypress,cypd4226";
 				reg = <0x08>;
@@ -178,22 +181,27 @@
 				interrupts = <TEGRA234_MAIN_GPIO(Y, 4) IRQ_TYPE_LEVEL_LOW>;
 				firmware-name = "nvidia,jetson-agx-xavier";
 				status = "okay";
+
 				#address-cells = <1>;
 				#size-cells = <0>;
+
 				ccg_typec_con0: connector@0 {
 					compatible = "usb-c-connector";
 					reg = <0>;
 					label = "USB-C";
 					data-role = "host";
+
 					ports {
 						#address-cells = <1>;
 						#size-cells = <0>;
+
 						port@0 {
 							reg = <0>;
 							hs_ucsi_ccg_p0: endpoint {
 								remote-endpoint = <&hs_typec_p0>;
 							};
 						};
+
 						port@1 {
 							reg = <1>;
 							ss_ucsi_ccg_p0: endpoint {
@@ -202,20 +210,24 @@
 						};
 					};
 				};
+
 				ccg_typec_con1: connector@1 {
 					compatible = "usb-c-connector";
 					reg = <1>;
 					label = "USB-C";
 					data-role = "dual";
+
 					ports {
 						#address-cells = <1>;
 						#size-cells = <0>;
+
 						port@0 {
 							reg = <0>;
 							hs_ucsi_ccg_p1: endpoint {
 								remote-endpoint = <&hs_typec_p1>;
 							};
 						};
+
 						port@1 {
 							reg = <1>;
 							ss_ucsi_ccg_p1: endpoint {