DTB spec says:
"A DTSpec-compliant boot program shall supply #address-cells and
#size-cells on all nodes that have children"
This adds the required cells to the interrupt-controller node.
It also fixes up pcie interrupt-map values to
use the correct number of #address-cells. They
appeared to be using 0 before.
JIRA TEGRAUEFI-3252
Signed-off-by: Jeshua Smith <jeshuas@nvidia.com>
ChangeId: Iaa30ab7a1612aa8927a6de239fb201c66049ab0f
Change-Id: Iaa30ab7a1612aa8927a6de239fb201c66049ab0f
Reviewed-on: https://git-master.nvidia.com/r/c/device/hardware/nvidia/t23x-public-dts/+/3231095
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
GVS: buildbot_gerritrpt <buildbot_gerritrpt@nvidia.com>
Disable SCE fabric node to avoid overwrite of the actual CBB error and
to print info about the original error. Access to SCE fabric registers
was blocked by firewall after the introduction of FSI. After that any
illegal access by some SW to SCE registers is correctly resulting in
the CBB firewall error. But when CCPLEX tries accessing the SCE-fabric
registers to print error info, then another firewall error comes as
the fabric registers are also firewall protected. This causes second
error info to be printed which is misleading. Disable SCE fabric node
to avoid printing the misleading second error. The first error will
get printed on interrupt from the fabric causing the actual access.
Bug 4369009
Change-Id: I8f47516248bf239d9a5c7780d0f10456b1ebd9de
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/device/hardware/nvidia/t23x-public-dts/+/3179289
(cherry picked from commit 43c90b2f83)
Reviewed-on: https://git-master.nvidia.com/r/c/device/hardware/nvidia/t23x-public-dts/+/3229274
Reviewed-by: Bibek Basu <bbasu@nvidia.com>
GVS: buildbot_gerritrpt <buildbot_gerritrpt@nvidia.com>
Graph sound card driver is enabled by default now and legacy machine
driver is going to be removed. Hence cleanup the legacy bindings and
going forward only maintain the graph sound card bindings. The 'sound'
device for graph card and legacy machine driver were merged earlier,
so we don't require duplicate phandles for the 'sound' node. Hence
remove the 'tegra_sound_graph' phandle.
Bug 4596865
Change-Id: Ie5a0a325a3d8b72d102a789116f7ccafa0bc7726
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/device/hardware/nvidia/t23x-public-dts/+/3111444
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Clock and reset names are being removed from upstream device-tree for
devices that only have a single clock or reset. The QSPI driver does not
use the 'reset-names' property and so this can be removed for these
devices.
UART devices may use either the 8250 serial driver or the Tegra HS
serial driver. The default is the 8250 driver. When the Tegra HS serial
driver is used, the 'reset-names' property is required because the
driver specifically uses the reset name although there is only one. The
clock-names and reset-names for the 0x3100000 UART can be removed from
the base overlay file because the reset-names is correctly specified
in the files where the compatibility string for the Tegra HS serial
driver is set.
Bug 4037899
Change-Id: I501cd36609824e5703a6b756fc5f5389dd8d2368
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/device/hardware/nvidia/t23x-public-dts/+/3074829
(cherry picked from commit fb920bea54)
Reviewed-on: https://git-master.nvidia.com/r/c/device/hardware/nvidia/t23x-public-dts/+/3075748
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
When booting Linux with GRUB, the serial console does not show the
kernel boot messages as expected. By default GRUB does not add the
'console' kernel parameter and relies on device-tree to configure the
default serial port. Device-tree configures the default serial port by
setting the property 'stdout-path=serial0:115200n8' where 'serial0' is
an alises to one of the devices serial ports. The default serial port
for Tegra234 devices is the TCU0 and so 'serial0' should be mapped to
this interface. However, the 'serial0' is being updated to be mapped to
a different UART.
Fix this by removing the additional 'serialX' aliases in the base
overlay file and add any alises that are not already defined to the
appropriate board file. This does change the mapping of some aliases but
this aligns the boards with the aliases as they are defined upstream.
Bug 4264560
Change-Id: Icf6bdb1e7d5c9abf5bdbf5378b4ed8122910b507
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/device/hardware/nvidia/t23x-public-dts/+/3072368
(cherry picked from commit 6114a37466)
Reviewed-on: https://git-master.nvidia.com/r/c/device/hardware/nvidia/t23x-public-dts/+/3075606
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
These preprocessor conditionals were a temporary step to facilitate
step by step reviews. Remove them.
Delete display overlay includes from tegra234-jetson.dts since the
formatting no longer is correct for an overlay. This file
tegra234-jetson.dts is planned for removal in the near future.
Indentation will be fixed in a follow-on patch to make reviews easier.
Bug 4290389
Change-Id: Ia6a0e240a96823e989e994d5564a7f0ad94061cc
Signed-off-by: Brad Griffis <bgriffis@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/device/hardware/nvidia/t23x-public-dts/+/3005701
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
In this commit:
1. The large platform overlays are being directly built into
a new base "nv" dtb. The names of these new dtbs directly tracks the
name of the upstream dtb that it extends. For an upstream dtb named
<base>.dtb the new corresponding new file is named <base>-nv.dtb.
2. The source files for <base>-nv.dtb are located in the nv-soc/ and
nv-platform/ files. Those files originated in the overlay/
directory but are moved to reflect that they are no longer part of
an overlay.
This new layout seeks to simplify building and handling of dtb files
while retaining close compatibility with the upstream dts sources.
Bug 4290389
Change-Id: Ic812e8e16c5515bb3e17b99a23815a99f67c42a2
Signed-off-by: Brad Griffis <bgriffis@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/device/hardware/nvidia/t23x-public-dts/+/2996468
(cherry picked from commit ee6247a701)
Reviewed-on: https://git-master.nvidia.com/r/c/device/hardware/nvidia/t23x-public-dts/+/3002840
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
