// SPDX-License-Identifier: GPL-2.0-only // SPDX-FileCopyrightText: Copyright (c) 2023-2024, NVIDIA CORPORATION & AFFILIATES. All rights reserved. /dts-v1/; /plugin/; #define CAM0_PWDN TEGRA234_MAIN_GPIO(H, 6) #define CAM1_PWDN TEGRA234_MAIN_GPIO(AC, 0) #define CAM_I2C_MUX TEGRA234_AON_GPIO(CC, 3) #include / { overlay-name = "Camera IMX477-C"; jetson-header-name = "Jetson 22pin CSI Connector"; compatible = JETSON_COMPATIBLE_P3768; /*IMX477 connected on cam0 port */ fragment@0 { target-path = "/"; __overlay__ { tegra-capture-vi { num-channels = <1>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; rbpcv3_imx477_vi_in1: endpoint { port-index = <2>; bus-width = <2>; remote-endpoint = <&rbpcv3_imx477_csi_out1>; }; }; }; }; tegra-camera-platform { compatible = "nvidia, tegra-camera-platform"; /** * The general guideline for naming badge_info contains 3 parts, and is as follows, * The first part is the camera_board_id for the module; if the module is in a FFD * platform, then use the platform name for this part. * The second part contains the position of the module, ex. "rear" or "front". * The third part contains the last 6 characters of a part number which is found * in the module's specsheet from the vendor. */ modules { module1 { badge = "jakku_rear_RBPCV3"; position = "rear"; orientation = "1"; drivernode0 { pcl_id = "v4l2_sensor"; sysfs-device-tree = "/sys/firmware/devicetree/base/bus@0/cam_i2cmux/i2c@1/rbpcv3_imx477_c@1a"; }; }; }; }; bus@0 { host1x@13e00000 { nvcsi@15a00000 { num-channels = <1>; #address-cells = <1>; #size-cells = <0>; channel@0 { reg = <0>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; rbpcv3_imx477_csi_in1: endpoint@0 { port-index = <2>; bus-width = <2>; remote-endpoint = <&rbpcv3_imx477_out1>; }; }; port@1 { reg = <1>; rbpcv3_imx477_csi_out1: endpoint@1 { remote-endpoint = <&rbpcv3_imx477_vi_in1>; }; }; }; }; }; }; cam_i2cmux { status = "okay"; compatible = "i2c-mux-gpio"; #address-cells = <1>; #size-cells = <0>; mux-gpios = <&gpio_aon CAM_I2C_MUX GPIO_ACTIVE_HIGH>; i2c-parent = <&cam_i2c>; i2c@0 { rbpcv2_imx219_a@10 { status = "disabled"; }; }; i2c@1 { status = "okay"; reg = <1>; #address-cells = <1>; #size-cells = <0>; rbpcv2_imx219_c@10 { status = "disabled"; }; rbpcv3_imx477_c@1a { reset-gpios = <&gpio CAM1_PWDN GPIO_ACTIVE_HIGH>; compatible = "ridgerun,imx477"; /* I2C device address */ reg = <0x1a>; /* V4L2 device node location */ devnode = "video0"; /* Physical dimensions of sensor */ physical_w = "3.680"; physical_h = "2.760"; sensor_model = "imx477"; use_sensor_mode_id = "true"; mode0 { /* IMX477_MODE_3840x2160 */ mclk_khz = "24000"; num_lanes = "2"; tegra_sinterface = "serial_c"; phy_mode = "DPHY"; discontinuous_clk = "no"; dpcm_enable = "false"; cil_settletime = "0"; lane_polarity = "0"; active_w = "3840"; active_h = "2160"; mode_type = "bayer"; pixel_phase = "rggb"; csi_pixel_bit_depth = "10"; readout_orientation = "90"; line_length = "11200"; inherent_gain = "1"; mclk_multiplier = "80"; pix_clk_hz = "300000000"; gain_factor = "16"; framerate_factor = "1000000"; exposure_factor = "1000000"; min_gain_val = "16"; /* 1.00x */ max_gain_val = "356"; /* 22x */ step_gain_val = "1"; default_gain = "16"; /* 1.00x */ min_hdr_ratio = "1"; max_hdr_ratio = "1"; min_framerate = "2000000"; /* 2.0 fps */ max_framerate = "30000000"; /* 30.0 fps */ step_framerate = "1"; default_framerate = "30000000"; /* 30.0 fps */ min_exp_time = "13"; /* us */ max_exp_time = "683709"; /* us */ step_exp_time = "1"; default_exp_time = "2495"; /* us */ embedded_metadata_height = "2"; }; mode1 { /* IMX477_MODE_1920X1080 */ mclk_khz = "24000"; num_lanes = "2"; tegra_sinterface = "serial_c"; phy_mode = "DPHY"; discontinuous_clk = "no"; dpcm_enable = "false"; cil_settletime = "0"; lane_polarity = "0"; active_w = "1920"; active_h = "1080"; mode_type = "bayer"; pixel_phase = "rggb"; csi_pixel_bit_depth = "10"; readout_orientation = "90"; line_length = "7000"; inherent_gain = "1"; mclk_multiplier = "80"; pix_clk_hz = "300000000"; gain_factor = "16"; framerate_factor = "1000000"; exposure_factor = "1000000"; min_gain_val = "16"; /* 1.00x */ max_gain_val = "356"; /* 22x */ step_gain_val = "1"; default_gain = "16"; /* 1.00x */ min_hdr_ratio = "1"; max_hdr_ratio = "1"; min_framerate = "2000000"; /* 2.0 fps */ max_framerate = "60000000"; /* 60.0 fps */ step_framerate = "1"; default_framerate = "60000000"; /* 60.0 fps */ min_exp_time = "13"; /* us */ max_exp_time = "683709"; /* us */ step_exp_time = "1"; default_exp_time = "2495"; /* us */ embedded_metadata_height = "2"; }; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; rbpcv3_imx477_out1: endpoint { port-index = <2>; bus-width = <2>; remote-endpoint = <&rbpcv3_imx477_csi_in1>; }; }; }; }; }; }; gpio@6000d000 { camera-control-output-low { gpio-hog; output-low; gpios = ; label = "cam1-pwdn", "cam0-pwdn"; }; }; }; }; }; };