mirror of
git://nv-tegra.nvidia.com/device/hardware/nvidia/t23x-public-dts.git
synced 2025-12-22 09:12:02 +03:00
27a9472777
svcacv is giving -1 as SPDX-FileCopyrightText tag was missing in the license header. Fix them. Bug 4327489 Change-Id: Ie71faf9d60550318d4722bdc0559af4cd2d3b441 Signed-off-by: Gautham Srinivasan <gauthams@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/c/device/hardware/nvidia/t23x-public-dts/+/2995601 Reviewed-by: svcacv <svcacv@nvidia.com> Reviewed-by: Brad Griffis <bgriffis@nvidia.com> Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com> GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
155 lines
3.4 KiB
Devicetree
155 lines
3.4 KiB
Devicetree
// SPDX-License-Identifier: GPL-2.0-only
|
|
// SPDX-FileCopyrightText: Copyright (c) 2017-2023, NVIDIA CORPORATION & AFFILIATES. All rights reserved.
|
|
|
|
/dts-v1/;
|
|
/plugin/;
|
|
|
|
#include <dt-bindings/clock/tegra234-clock.h>
|
|
#include <dt-bindings/gpio/tegra234-gpio.h>
|
|
#include <dt-bindings/tegra234-p3737-0000+p3701-0000.h>
|
|
|
|
/* camera control gpio definitions */
|
|
#define CAM0_RST_L TEGRA234_MAIN_GPIO(H, 3)
|
|
|
|
/* TODO: Re-enable cam1 and cam2*/
|
|
/ {
|
|
overlay-name = "Jetson Camera E3331 module";
|
|
jetson-header-name = "Jetson AGX CSI Connector";
|
|
compatible = JETSON_COMPATIBLE;
|
|
|
|
fragment@0 {
|
|
target-path = "/";
|
|
|
|
board_config {
|
|
ids = "3331-*";
|
|
sw-modules = "kernel";
|
|
};
|
|
|
|
__overlay__ {
|
|
tegra-capture-vi {
|
|
num-channels = <1>;
|
|
ports {
|
|
status = "okay";
|
|
port@0 {
|
|
status = "okay";
|
|
endpoint {
|
|
status = "okay";
|
|
remote-endpoint = <&e3331_csi_out0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
tegra-camera-platform {
|
|
compatible = "nvidia, tegra-camera-platform";
|
|
num_csi_lanes = <3>;
|
|
max_lane_speed = <1500000>;
|
|
min_bits_per_pixel = <10>;
|
|
vi_peak_byte_per_pixel = <2>;
|
|
vi_bw_margin_pct = <25>;
|
|
max_pixel_rate = <800000>;
|
|
isp_peak_byte_per_pixel = <5>;
|
|
isp_bw_margin_pct = <25>;
|
|
|
|
modules {
|
|
status = "okay";
|
|
module0 {
|
|
status = "okay";
|
|
badge = "e3331_rear_22N02A";
|
|
position = "rear";
|
|
orientation = "1";
|
|
drivernode0 {
|
|
status = "okay";
|
|
pcl_id = "v4l2_sensor";
|
|
sysfs-device-tree = "/sys/firmware/devicetree/base/bus@0/i2c@3180000/tca9546@70/i2c@0/imx318_a@10";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
bus@0 {
|
|
gpio@2200000 {
|
|
camera-control-output-low {
|
|
gpio-hog;
|
|
output-low;
|
|
gpios = <CAM0_RST_L 0>;
|
|
label = "cam0-rst";
|
|
};
|
|
};
|
|
host1x@13e00000 {
|
|
nvcsi@15a00000 {
|
|
num-channels = <1>;
|
|
channel@0 {
|
|
status = "okay";
|
|
ports {
|
|
status = "okay";
|
|
port@0 {
|
|
status = "okay";
|
|
endpoint@0 {
|
|
status = "okay";
|
|
remote-endpoint = <&e3331_imx318_out0>;
|
|
};
|
|
};
|
|
port@1 {
|
|
status = "okay";
|
|
endpoint@1 {
|
|
status = "okay";
|
|
remote-endpoint = <&e3331_vi_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
i2c@3180000 {
|
|
tca9546@70 {
|
|
compatible = "nxp,pca9546";
|
|
reg = <0x70>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
skip_mux_detect;
|
|
status = "okay";
|
|
i2c@0 {
|
|
reg = <0>;
|
|
i2c-mux,deselect-on-exit;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
imx318_a@10 {
|
|
status = "okay";
|
|
clocks = <&bpmp TEGRA234_CLK_EXTPERIPH1>,
|
|
<&bpmp TEGRA234_CLK_PLLP_OUT0>;
|
|
clock-names = "extperiph1", "pllp_grtba";
|
|
mclk = "extperiph1";
|
|
clock-frequency = <24000000>;
|
|
reset-gpios = <&gpio CAM0_RST_L GPIO_ACTIVE_HIGH>;
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
port@0 {
|
|
status = "okay";
|
|
reg = <0>;
|
|
endpoint {
|
|
status = "okay";
|
|
remote-endpoint = <&e3331_csi_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
fragment@16 {
|
|
target-path = "/bus@0/i2c@3180000/tca9546@70";
|
|
board_config {
|
|
ids = "3331-*";
|
|
sw-modules = "kernel";
|
|
};
|
|
__overlay__ {
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|