mirror of
git://nv-tegra.nvidia.com/device/hardware/nvidia/t23x-public-dts.git
synced 2025-12-22 09:12:02 +03:00
853dd1a3d1
svcacv is giving -1 as SPDX-FileCopyrightText tag was missing in
the license header. Fix them.
Bug 4327489
Change-Id: Ie71faf9d60550318d4722bdc0559af4cd2d3b441
Signed-off-by: Gautham Srinivasan <gauthams@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/device/hardware/nvidia/t23x-public-dts/+/2995601
(cherry picked from commit 27a9472777)
Reviewed-on: https://git-master.nvidia.com/r/c/device/hardware/nvidia/t23x-public-dts/+/2997051
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
298 lines
9.8 KiB
Devicetree
298 lines
9.8 KiB
Devicetree
// SPDX-License-Identifier: GPL-2.0-only
|
|
// SPDX-FileCopyrightText: Copyright (c) 2023, NVIDIA CORPORATION & AFFILIATES. All rights reserved.
|
|
|
|
/dts-v1/;
|
|
/plugin/;
|
|
|
|
#include "tegra234-camera-p3783-a00.dtsi"
|
|
#include "dt-bindings/gpio/tegra234-gpio.h"
|
|
#include "dt-bindings/clock/tegra234-clock.h"
|
|
|
|
#define CAM0_RST_L TEGRA234_MAIN_GPIO(H, 3)
|
|
#define CAM0_PWDN TEGRA234_MAIN_GPIO(H, 6)
|
|
#define CAM1_RST_L TEGRA234_MAIN_GPIO(AC, 1)
|
|
#define CAM1_PWDN TEGRA234_MAIN_GPIO(AC, 0)
|
|
#define PWR_EN TEGRA234_MAIN_GPIO(AC, 7)
|
|
#define GYRO1_IRQ_GPIO TEGRA234_AON_GPIO(CC, 1)
|
|
#define ACCE1_IRQ_GPIO TEGRA234_AON_GPIO(CC, 0)
|
|
|
|
/* camera control gpio definitions */
|
|
/ {
|
|
overlay-name = "Jetson Camera Hawk-Owl p3783 module";
|
|
jetson-header-name = "Jetson 122pin CSI Connector";
|
|
compatible = "nvidia,p3740-0000+p3701-0000", "nvidia,p3740-0002-b01+p3701-0002","nvidia,p3740-0002+p3701-0008";
|
|
|
|
fragment-camera-hawk-owl@0 {
|
|
target-path = "/";
|
|
__overlay__ {
|
|
bus@0 {
|
|
/* set camera gpio direction to output */
|
|
gpio@2200000 {
|
|
camera-control-output-low {
|
|
gpio-hog;
|
|
output-low;
|
|
gpios = <CAM0_RST_L 0 CAM0_PWDN 0
|
|
CAM1_RST_L 0 CAM1_PWDN 0>;
|
|
label = "cam0-rst", "cam0-pwdn",
|
|
"cam1-rst", "cam1-pwdn";
|
|
};
|
|
};
|
|
i2c@3180000 {
|
|
max96712_b@62 {
|
|
compatible = "nvidia,max96712";
|
|
reg = <0x62>;
|
|
channel = "b";
|
|
pwdn-gpios = <&gpio CAM1_PWDN GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
ar0234_i@30 {
|
|
status = "okay";
|
|
def-addr = <0x18>;
|
|
/* Define any required hw resources needed by driver */
|
|
/* ie. clocks, io pins, power sources */
|
|
clocks = <&bpmp TEGRA234_CLK_EXTPERIPH1>,
|
|
<&bpmp TEGRA234_CLK_EXTPERIPH1>;
|
|
clock-names = "extperiph1", "pllp_grtba";
|
|
mclk = "extperiph1";
|
|
channel = "b";
|
|
has-eeprom;
|
|
eeprom-addr = <0x38>;
|
|
reset-gpios = <&gpio CAM1_RST_L GPIO_ACTIVE_HIGH>;
|
|
pwdn-gpios = <&gpio CAM1_PWDN GPIO_ACTIVE_HIGH>;
|
|
pwr-gpios = <&gpio PWR_EN GPIO_ACTIVE_HIGH>;
|
|
};
|
|
ar0234_j@32 {
|
|
status = "okay";
|
|
def-addr = <0x18>;
|
|
/* Define any required hw resources needed by driver */
|
|
/* ie. clocks, io pins, power sources */
|
|
clocks = <&bpmp TEGRA234_CLK_EXTPERIPH1>,
|
|
<&bpmp TEGRA234_CLK_EXTPERIPH1>;
|
|
clock-names = "extperiph1", "pllp_grtba";
|
|
mclk = "extperiph1";
|
|
channel = "b";
|
|
has-eeprom;
|
|
eeprom-addr = <0x3a>;
|
|
reset-gpios = <&gpio CAM1_RST_L GPIO_ACTIVE_HIGH>;
|
|
pwdn-gpios = <&gpio CAM1_PWDN GPIO_ACTIVE_HIGH>;
|
|
pwr-gpios = <&gpio PWR_EN GPIO_ACTIVE_HIGH>;
|
|
};
|
|
ar0234_k@34 {
|
|
status = "okay";
|
|
def-addr = <0x18>;
|
|
/* Define any required hw resources needed by driver */
|
|
/* ie. clocks, io pins, power sources */
|
|
clocks = <&bpmp TEGRA234_CLK_EXTPERIPH1>,
|
|
<&bpmp TEGRA234_CLK_EXTPERIPH1>;
|
|
clock-names = "extperiph1", "pllp_grtba";
|
|
mclk = "extperiph1";
|
|
channel = "b";
|
|
has-eeprom;
|
|
eeprom-addr = <0x3c>;
|
|
reset-gpios = <&gpio CAM1_RST_L GPIO_ACTIVE_HIGH>;
|
|
pwdn-gpios = <&gpio CAM1_PWDN GPIO_ACTIVE_HIGH>;
|
|
pwr-gpios = <&gpio PWR_EN GPIO_ACTIVE_HIGH>;
|
|
};
|
|
ar0234_l@36 {
|
|
status = "okay";
|
|
def-addr = <0x18>;
|
|
/* Define any required hw resources needed by driver */
|
|
/* ie. clocks, io pins, power sources */
|
|
clocks = <&bpmp TEGRA234_CLK_EXTPERIPH1>,
|
|
<&bpmp TEGRA234_CLK_EXTPERIPH1>;
|
|
clock-names = "extperiph1", "pllp_grtba";
|
|
mclk = "extperiph1";
|
|
channel = "b";
|
|
has-eeprom;
|
|
eeprom-addr = <0x3e>;
|
|
reset-gpios = <&gpio CAM1_RST_L GPIO_ACTIVE_HIGH>;
|
|
pwdn-gpios = <&gpio CAM1_PWDN GPIO_ACTIVE_HIGH>;
|
|
pwr-gpios = <&gpio PWR_EN GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
i2c@31e0000 {
|
|
max96712_a@62 {
|
|
compatible = "nvidia,max96712";
|
|
reg = <0x62>;
|
|
channel = "a";
|
|
pwdn-gpios = <&gpio CAM0_PWDN GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
virtual_i2c_mux@50 {
|
|
reg = <0x50>;
|
|
compatible = "nvidia,virtual-i2c-mux";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
i2c-parent = <&dp_aux_ch3_i2c>;
|
|
status = "okay";
|
|
|
|
i2c@0 {
|
|
reg = <0>;
|
|
i2c-mux,deselect-on-exit;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
bmi088_a@69 {
|
|
compatible = "bmi,bmi088";
|
|
reg = <0x69>;
|
|
accel_i2c_addr = <0x19>;
|
|
accel_irq_gpio = <&gpio_aon ACCE1_IRQ_GPIO GPIO_ACTIVE_HIGH>;
|
|
gyro_irq_gpio = <&gpio_aon GYRO1_IRQ_GPIO GPIO_ACTIVE_HIGH>;
|
|
accel_matrix = [01 00 00 00 01 00 00 00 01];
|
|
gyro_matrix = [01 00 00 00 01 00 00 00 01];
|
|
gyro_reg_0x18 = <0x81>;
|
|
status = "okay";
|
|
};
|
|
ar0234_a@30 {
|
|
status = "okay";
|
|
def-addr = <0x10>;
|
|
/* Define any required hw resources needed by driver */
|
|
/* ie. clocks, io pins, power sources */
|
|
clocks = <&bpmp TEGRA234_CLK_EXTPERIPH1>,
|
|
<&bpmp TEGRA234_CLK_EXTPERIPH1>;
|
|
clock-names = "extperiph1", "pllp_grtba";
|
|
mclk = "extperiph1";
|
|
channel = "a";
|
|
has-eeprom;
|
|
eeprom-addr = <0x40>;
|
|
reset-gpios = <&gpio CAM0_RST_L GPIO_ACTIVE_HIGH>;
|
|
pwdn-gpios = <&gpio CAM0_PWDN GPIO_ACTIVE_HIGH>;
|
|
pwr-gpios = <&gpio PWR_EN GPIO_ACTIVE_HIGH>;
|
|
};
|
|
ar0234_b@31 {
|
|
status = "okay";
|
|
def-addr = <0x18>;
|
|
/* Define any required hw resources needed by driver */
|
|
/* ie. clocks, io pins, power sources */
|
|
clocks = <&bpmp TEGRA234_CLK_EXTPERIPH1>,
|
|
<&bpmp TEGRA234_CLK_EXTPERIPH1>;
|
|
clock-names = "extperiph1", "pllp_grtba";
|
|
mclk = "extperiph1";
|
|
channel = "c";
|
|
has-eeprom;
|
|
eeprom-addr = <0x40>;
|
|
reset-gpios = <&gpio CAM0_RST_L GPIO_ACTIVE_HIGH>;
|
|
pwdn-gpios = <&gpio CAM0_PWDN GPIO_ACTIVE_HIGH>;
|
|
pwr-gpios = <&gpio PWR_EN GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
i2c@1 {
|
|
reg = <1>;
|
|
i2c-mux,deselect-on-exit;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ar0234_c@32 {
|
|
status = "okay";
|
|
def-addr = <0x10>;
|
|
/* Define any required hw resources needed by driver */
|
|
/* ie. clocks, io pins, power sources */
|
|
clocks = <&bpmp TEGRA234_CLK_EXTPERIPH1>,
|
|
<&bpmp TEGRA234_CLK_EXTPERIPH1>;
|
|
clock-names = "extperiph1", "pllp_grtba";
|
|
mclk = "extperiph1";
|
|
channel = "a";
|
|
has-eeprom;
|
|
eeprom-addr = <0x42>;
|
|
reset-gpios = <&gpio CAM0_RST_L GPIO_ACTIVE_HIGH>;
|
|
pwdn-gpios = <&gpio CAM0_PWDN GPIO_ACTIVE_HIGH>;
|
|
pwr-gpios = <&gpio PWR_EN GPIO_ACTIVE_HIGH>;
|
|
};
|
|
ar0234_d@33 {
|
|
status = "okay";
|
|
def-addr = <0x18>;
|
|
/* Define any required hw resources needed by driver */
|
|
/* ie. clocks, io pins, power sources */
|
|
clocks = <&bpmp TEGRA234_CLK_EXTPERIPH1>,
|
|
<&bpmp TEGRA234_CLK_EXTPERIPH1>;
|
|
clock-names = "extperiph1", "pllp_grtba";
|
|
mclk = "extperiph1";
|
|
channel = "c";
|
|
has-eeprom;
|
|
eeprom-addr = <0x42>;
|
|
reset-gpios = <&gpio CAM0_RST_L GPIO_ACTIVE_HIGH>;
|
|
pwdn-gpios = <&gpio CAM0_PWDN GPIO_ACTIVE_HIGH>;
|
|
pwr-gpios = <&gpio PWR_EN GPIO_ACTIVE_HIGH>;
|
|
};
|
|
ar0234_e@34 {
|
|
status = "okay";
|
|
def-addr = <0x10>;
|
|
/* Define any required hw resources needed by driver */
|
|
/* ie. clocks, io pins, power sources */
|
|
clocks = <&bpmp TEGRA234_CLK_EXTPERIPH1>,
|
|
<&bpmp TEGRA234_CLK_EXTPERIPH1>;
|
|
clock-names = "extperiph1", "pllp_grtba";
|
|
mclk = "extperiph1";
|
|
channel = "a";
|
|
has-eeprom;
|
|
eeprom-addr = <0x44>;
|
|
reset-gpios = <&gpio CAM0_RST_L GPIO_ACTIVE_HIGH>;
|
|
pwdn-gpios = <&gpio CAM0_PWDN GPIO_ACTIVE_HIGH>;
|
|
pwr-gpios = <&gpio PWR_EN GPIO_ACTIVE_HIGH>;
|
|
};
|
|
ar0234_f@35 {
|
|
status = "okay";
|
|
def-addr = <0x18>;
|
|
/* Define any required hw resources needed by driver */
|
|
/* ie. clocks, io pins, power sources */
|
|
clocks = <&bpmp TEGRA234_CLK_EXTPERIPH1>,
|
|
<&bpmp TEGRA234_CLK_EXTPERIPH1>;
|
|
clock-names = "extperiph1", "pllp_grtba";
|
|
mclk = "extperiph1";
|
|
channel = "c";
|
|
has-eeprom;
|
|
eeprom-addr = <0x44>;
|
|
reset-gpios = <&gpio CAM0_RST_L GPIO_ACTIVE_HIGH>;
|
|
pwdn-gpios = <&gpio CAM0_PWDN GPIO_ACTIVE_HIGH>;
|
|
pwr-gpios = <&gpio PWR_EN GPIO_ACTIVE_HIGH>;
|
|
};
|
|
ar0234_g@36 {
|
|
status = "okay";
|
|
def-addr = <0x10>;
|
|
/* Define any required hw resources needed by driver */
|
|
/* ie. clocks, io pins, power sources */
|
|
clocks = <&bpmp TEGRA234_CLK_EXTPERIPH1>,
|
|
<&bpmp TEGRA234_CLK_EXTPERIPH1>;
|
|
clock-names = "extperiph1", "pllp_grtba";
|
|
mclk = "extperiph1";
|
|
channel = "a";
|
|
has-eeprom;
|
|
eeprom-addr = <0x46>;
|
|
reset-gpios = <&gpio CAM0_RST_L GPIO_ACTIVE_HIGH>;
|
|
pwdn-gpios = <&gpio CAM0_PWDN GPIO_ACTIVE_HIGH>;
|
|
pwr-gpios = <&gpio PWR_EN GPIO_ACTIVE_HIGH>;
|
|
};
|
|
ar0234_h@37 {
|
|
status = "okay";
|
|
def-addr = <0x18>;
|
|
/* Define any required hw resources needed by driver */
|
|
/* ie. clocks, io pins, power sources */
|
|
clocks = <&bpmp TEGRA234_CLK_EXTPERIPH1>,
|
|
<&bpmp TEGRA234_CLK_EXTPERIPH1>;
|
|
clock-names = "extperiph1", "pllp_grtba";
|
|
mclk = "extperiph1";
|
|
channel = "c";
|
|
has-eeprom;
|
|
eeprom-addr = <0x46>;
|
|
reset-gpios = <&gpio CAM0_RST_L GPIO_ACTIVE_HIGH>;
|
|
pwdn-gpios = <&gpio CAM0_PWDN GPIO_ACTIVE_HIGH>;
|
|
pwr-gpios = <&gpio PWR_EN GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
fragment-cam-cdi-tsc@0 {
|
|
target-path = "/";
|
|
__overlay__ {
|
|
tsc_sig_gen@c6a0000 {
|
|
status = "okay";
|
|
generator@380 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|