[1] The DLA firmware configures the DEST and MASK registers during
the initialization.
[2] In OOT, the DLA KMD is accidentally setting the interrupts. This
will result in enabling additional interrupts that the firmware
does not handle (like NVDLA_GENERIC_INTR_FAULT_CRITICAL).
[3] This commit fixes the issue by avoiding the interrupt settings
at the DLA KMD.
Bug 3960841
Change-Id: Ied77ac7564ae3b3202b9cceaf08ad3c7da9f947c
Signed-off-by: Arvind M <am@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2861253
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Amit Sharma (SW-TEGRA) <amisharma@nvidia.com>
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
The syncpt interface APIs in the host1x-nvhost driver slightly differ
from those in the legacy nvhost driver because instead of passing the
platform device structure for the host1x device, the platform device
structure for the host1x client device is passed.
By aligning the APIs so that we pass the platform device structure for
the host1x in all implementations, we can simplify the PVA driver and
directly use the APIs in the NVIDIA display driver.
The NVIDIA display driver requires some additional syncpt interface APIs
and so implement these as well.
Bug 3713048
Change-Id: I507e6fd066e6e22c0c47c20ba0dd3be5fa033c59
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2813827
Reviewed-by: Bibek Basu <bbasu@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
With Linux v6.1, if CONFIG_PCI_P2PDMA is enabled, then mapping the
syncpt shim causes a kernel paging request fault. The fault occurs when
dma_map_sg_attrs() is called in by nvhost_syncpt_unit_interface_init(),
which is attempting to map the syncpt shim MMIO space.
The function dma_map_sg_attrs() calls iomm_dma_map_sg() and since
upstream Linux commit 30280eee2db1 ("iommu/dma: support PCI P2PDMA pages
in dma-iommu map_sg") was added this now calls is_pci_p2pdma_page(). The
function is_pci_p2pdma_page() requires that there is a 'struct page'
associated with the sg, but this is not the case and so deferencing the
'struct page' pointer returned by sg_page() results in a paging fault.
Using dma_map_sg_attrs() to map MMIO that is not associated with valid
page structures is not guaranteed to work. Therefore, fix this by using
dma_map_resource() to map the syncpt shim instead.
Bug 3871422
Change-Id: I2b08a3b78be0850bff44e62bfc93c8d095eb82a2
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2818417
(cherry picked from commit 97f1282f2959c208effebf93cc5061d6e7fa6c55)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2819086
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Drivers, such as the PVA and DLA driver, that call
nvhost_syncpt_unit_interface_init() during probe are missing a call to
clean-up the DMA mappings this function may create if the driver probe
fails or if the driver is removed. The function
nvhost_syncpt_unit_interface_init() may make a call to
dma_map_sg_attrs() and we need to ensure that dma_unmap_sg_attrs() is
called if the probe of the driver fails or if the driver is unloaded.
Add a new function, nvhost_syncpt_unit_interface_deinit(), that calls
dma_unmap_sg_attrs() if needed for drivers to call.
Bug 3800349
Change-Id: I62a4e19cd42878dac54fa623509440596ffdf17f
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2801280
(cherry picked from commit cee12fb989186611aa9deb5ada45831ab5f783aa)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2801934
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
When building the host1x-nvhost driver as an external module, the driver
source is now copied into a common location with all the other external
modules. Therefore, we can now use the 'srctree.nvidia' path for finding
the necessary header files for Host1x. Update the include search paths
to use 'srctree.nvidia' when building the driver.
Bug 3817518
Change-Id: I443dd4cb6d01c4e9be8f3c02550b1050d0bcfd28
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2785956
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
1. Replace nvhost print functions with PVA driver's private
implementation with similar functionalities.
2. Change syncpoint from host managed to client managed so that
syncpoint max value is tracked inside PVA driver. This change is needed
because upstream host1x driver doesn't allow decrement of max value.
3. Various minor changes for adapting to upstream kernel APIs.
Bug 3662478
Change-Id: I16eff6c06c51afe0f274598e1273404924d18684
Signed-off-by: Nan Wang <nanwa@nvidia.com>
Signed-off-by: Abhinaya Agrawal <abhinayaa@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2710684
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Both host1x and nvhost expose APIs that deinitialize the debugfs
and remove debugfs files/directories that were created. At present,
debugfs_remove() is inovked to do this. However,
debugfs_remove_recursive() should instead be used to ensure that
all files within a debugfs are recursively removed before the
directory is removed.
Bug 3662478
Change-Id: Idb7d1458c02f57f6d656a7bfe1df3adf5e0497aa
Signed-off-by: Abhinaya Agrawal <abhinayaa@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2714042
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Omar Nemri <onemri@nvidia.com>
GVS: Gerrit_Virtual_Submit
Some host1x clients, such as PVA, do not have a falcon microprocessor
and currently the host1x-nvhost shim driver assumes that all clients do.
Fix this by moving the falcon initialisation code from the
nvhost_module_init() function and into the
nvhost_flcn_finalize_poweron() function. This aligns with the
implementation in the downstream nvhost driver.
JIRA LS-493
Change-Id: Ic94c3489cefa6fd256f111d8e6c7afb539b5bc8a
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2710548
Reviewed-by: Nan Wang <nanwa@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
GVS: Gerrit_Virtual_Submit
After unloading the NVDLA driver and then reloading the NVDLA, the
kernel is crashing. The host1x-nvhost driver is missing a call to
class_destroy() in nvhost_client_device_release() which gets called when
removing the DLA driver and this is preventing the DLA driver from
creating the class again when reloading. The crash then occurs because
when the driver is reloaded, creating the class for the DLA driver
fails and then the host1x-nvhost driver incorrectly calls
device_destroy() even though the device has not been created yet. Fix
this by ensuring the class_destroy() is called by
nvhost_client_device_release() and in the necessary error paths and then
remove the call to device_destroy().
Finally, replace request_irq() with devm_request_irq() to ensure that
the interrupts are also released as necessary on removal.
Bug 3641820
Change-Id: Ia328bf63d528e8c31bff1d7b3ac0d5dddc22f1f5
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2710546
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
GVS: Gerrit_Virtual_Submit
Sparse reports the following warnings for the host1x-nvhost driver ...
drivers/gpu/host1x-nvhost/falcon.c:65:27: warning: cast to restricted __le32
drivers/gpu/host1x-nvhost/nvhost.c:205:22: warning: symbol
'nvhost_syncpt_get_by_id' was not declared. Should it be static?
drivers/gpu/host1x-nvhost/nvhost.c:768:5: warning: symbol
'nvhost_module_runtime_resume' was not declared. Should it be static?
drivers/gpu/host1x-nvhost/nvhost.c:796:5: warning: symbol
'nvhost_module_runtime_suspend' was not declared. Should it be static?
Fix the above by correcting the cast in falcon_copy_firmware_image(), remove
the function nvhost_syncpt_get_by_id() because it is not used, and make the
nvhost_module_runtime_resume/suspend functions static.
JIRA LS-410
Change-Id: I2c923fccd0b6e53d17198617b90905c6cd06eb5c
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2670180
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
GVS: Gerrit_Virtual_Submit
When compiling the host1x-nvhost driver for Linux v5.10 it is currently
failing and the following errors are seen ...
host1x-nvhost/nvhost.c: In function ‘nvhost_intr_do_work’:
nvhost.c:554:2: error: implicit declaration of function ‘kfree’
[-Werror=implicit-function-declaration]
kfree(host1x_cb);
^~~~~
host1x-nvhost/nvhost.c: In function ‘nvhost_intr_register_notifier’:
nvhost.c:579:7: error: implicit declaration of function ‘kzalloc’
[-Werror=implicit-function-declaration]
cb = kzalloc(sizeof(*cb), GFP_KERNEL);
^~~~~~~
Fix this by including slab.h.
JIRA LS-410
Change-Id: I8a56d33933d3e57c04b011e2c6da03d5f2bbc707
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2667882
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
GVS: Gerrit_Virtual_Submit
The host1x-nvhost driver by default configures the clock rates for
the host1x client devices to the maximum supported rate because
there is runtime clock scaling support yet. However, currently the
host1x-nvhost driver is only setting the rate for the client's first
clock and not the others. Fix this by correcting the index used when
iterating through the list of clocks.
JIRA LS-410
Change-Id: If410ee25548c0dddecc5b0de9d8b6f4f687fd73c
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2657897
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add a new host1x-nvhost driver that provides an nvhost interface for
the upstream Linux host1x driver so that downstream drivers that use
this interface can be supported on upstream.
Note that some of the nvhost function prototypes are moved from their
default header file to the include/linux/nvhost.h header file so
simplify building with upstream and downstream kernels.
JIRA LS-410
Change-Id: Icdbb34e879dcd91f6e3dd093b7fb400d1be4d561
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2653097
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
The host1x-nvhost drivers are available in kernel/nvidia
and to integrate the drivers to the kernel/nvidia-oot,
remove the dummy Makefile.
Bug 4038415
Change-Id: I2179a9e4cc096bf9b8534b3415b595d185785e06
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Upstream Linux commit ("1369459b2e21 iommu: Add a gfp parameter to
iommu_map()") adds a new parameter to the iommu_map function and this
breaks building the host1x driver with Linux v6.3.
Upstream Linux commit 2a81ada32f0e ("driver core: make struct
bus_type.uevent() take a const *") updates the uevent function pointer
type to make the device structure const which also breaks building the
host1x driver with Linux v6.3.
Address both of these issues to fix building the host1x driver with
Linux v6.3.
Bug 4014315
Change-Id: Ibd27f5e8442cc6970bcaac0dcfb9fc262860aee9
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2867136
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Add API for reading the activity monitor average count for VIC,
NVENC, and NVDEC. There is currently no support for initializing
actmon, so this relies on someone else on a virtualized system
having initialized it (and mapped the actmon region read-only).
Bug 3973633
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Change-Id: Ia1bfec6a090d4effb288b17cbac4d42bf5d0b4e5
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2864719
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
dma_fence_wait_timeout (along with a host of other jiffies-based
timeouting functions) returns zero both in case of timeout and when
the wait completes during the last jiffy before timeout. As such,
we can't rely on it to distinguish between success and timeout.
To prevent confusing callers by returning -EAGAIN before the timeout
period has elapsed, check if the fence got signaled again after
the wait.
Bug 3955201
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Change-Id: Ib90cbd3d78bac773a724a523925ae5d1b70107c8
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2857405
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
The error handling for platform_get_irq() failing no longer works after
a recent change, clang now points this out with a warning:
drivers/gpu/host1x/dev.c:520:6: error: variable 'syncpt_irq' is uninitialized when used here [-Werror,-Wuninitialized]
if (syncpt_irq < 0)
^~~~~~~~~~
Fix this by removing the variable and checking the correct error status.
Fixes: 625d4ffb438c ("gpu: host1x: Rewrite syncpoint interrupt handling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Change-Id: I780c935101b8c65070eeba3552f96a1bfb109592
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2853776
Reviewed-by: Santosh BS <santoshb@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Add support for syncpoint pools. These are configuration-dependent
subsets of syncpoints that can only be allocated by specifying
an allocation specifically from that pool.
In this patch, we add support for the GPU pool. On certain systems,
the GPU is for safety purposes limited to accessing a specific set
of syncpoints. Therefore, syncpoints allocated for GPU use need to
come from this pool.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Change-Id: I385b8bdfdac8573b26f0b1a0feaf05de071148a1
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2826198
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-by: Sanif Veeras <sveeras@nvidia.com>
Reviewed-by: Raghavendra Vishnu Kumar <rvk@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Tested-by: Sanif Veeras <sveeras@nvidia.com>
Add support for running as a guest system under a hypervisor, using
Host1x HW's virtualization capabilities.
In effect this involves not touching apertures other than the 'vm'
aperture, and channels and syncpoints other than those that are
assigned to the VM.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Change-Id: Ideec5b0b9a692aa3ee6b4a0240c5755c983cb7bd
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2811837
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
On Tegra234, engines that are programmed through Host1x channels can
be attached to either the NISO0 or NISO1 SMMU. Because of that, when
selecting a context device to use with an engine, we need to select
one that is also attached to the same SMMU.
Add a parameter to host1x_memory_context_alloc to specify which device
we are allocating a context for, and use it to pick an appropriate
context device.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Change-Id: I32af312c85164b72c14409d816d3b50ad5c7bfe5
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2811836
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently all fences have a 30 second timeout to ensure they are
cleaned up if the fence never completes otherwise. However, this
one size fits all solution doesn't actually fit in every case,
such as syncpoint waiting where we want to be able to have timeouts
longer than 30 seconds. As such, we want to be able to give control
over fence cancellation to the caller (and maybe eventually get rid
of the internal timeout altogether).
Here we add this cancellation mechanism by essentially adding a
function for entering the timeout path by function call, and changing
the syncpoint wait function to use it.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Change-Id: I4600544afe21efdd3f7d06362bd124130ddec3db
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2786637
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Move from the old, complex intr handling code to a new implementation
based on dma_fences. While there is a fair bit of churn to get there,
the new implementation is much simpler and likely faster as well due
to allowing signaling directly from interrupt context.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Change-Id: I81c47fa1946679813f90e3fd8e1d1e9d6342143e
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2786635
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
In anticipation of removal of the intr API, implement job tracking
using DMA fences instead. The main two things about this are
making cdma_update schedule the work since fence completion can
now be called from interrupt context, and some complication in
ensuring the callback is not running when we free the fence.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Change-Id: I25f7f5a6cad24a00563eed79e0e17b1df1eadcdc
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2786636
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
In anticipation of removal of the intr API, move host1x_syncpt_wait
to use DMA fences instead. As of this patch, this means that waits
have a 30 second maximum timeout because of the implicit timeout
we have with fences, but that will be lifted in a follow-up patch.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Change-Id: I82a262b73861b35c4031983f4134d4b4006e3b16
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2786634
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Add support for the optical flow accelerator. Implementation is the
same as for other Falcons except that we omit some legacy things
since the engine only exists from T234 onwards, and the addition
of having to initialize the OFA's safety RAM before boot.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Change-Id: I9612e82a116cc76be492a0c533afce67c42f6a2c
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2784964
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
host1x_cdma_push_wide had the assumptions that the last parameter word
was a NOP opcode, and that NOP opcodes could be used in all situations.
Neither are true with the new job opcode sequence, so adjust the
function to not have these assumptions, and instead place an early
RESTART opcode when necessary to jump back to the beginning of the
pushbuffer.
Bug 3724727
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Change-Id: I88074e838e4f1471471f0848aca9d8d73c7b5f8c
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2745959
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
Reviewed-by: Bibek Basu <bbasu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: Brad Griffis <bgriffis@nvidia.com>
When MLOCK enforcement is enabled, the 0-word write currently done
is rejected by the hardware outside of an MLOCK region. As such,
on these chips, which also have the newer, more convenient RESTART_W
opcode, use that instead to skip over the timed out job.
Bug 3724727
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Change-Id: I9e22eb7ccd17127ca517a034f5dbd32326412f9d
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2745957
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
Reviewed-by: Bibek Basu <bbasu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: Brad Griffis <bgriffis@nvidia.com>
With the full-featured opcode sequence using MLOCKs, we need to also
unlock those MLOCKs in the event of a timeout. However, it turns out
that on Tegra186/Tegra194, by default, we don't need to do this;
furthermore, on Tegra234 it is much simpler to do; so only implement
this on Tegra234 for the time being.
Bug 3724727
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Change-Id: Icc15ae705844cd26ae3f1d1146ff20f1d9b7a14d
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2745956
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
Reviewed-by: Bibek Basu <bbasu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: Brad Griffis <bgriffis@nvidia.com>
