V4l2 ctrl values are 0 during init time s_ctrl call
from v4l2. Since framerate val parameter is 0, when
set_framerate_ex is called from set_ctrl_ex during
initialization for probing of imx318 sensor, this
results in invalid error and probe failure for imx318.
Assign framerate 'val' to a value from imx318 sensor
device-tree properties within the given range to avoid
probe failure due to this.
Bug 3692128
Change-Id: Ib5f50e64f99c8443bf604066eda315dc96fbde03
Signed-off-by: Shubham Chandra <shubhamc@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3089350
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Praveen AC <pac@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Fix imx477 partial frame issue and wrong frame-length
/exposure time calculations.
Uses hardcoded sensor internal clock frequency
instead of clock values from sensor device tree.
Adding clock frequency to device tree also require
deskew_initial_enable = "true". Setting deskew in
device tree is causing kernel panic in function
nvcsi_deskew_setup(). For unblocking the IMX477
use case, set hardcoded clock in driver for now.
Bug 4384649
Change-Id: Iedb02673c6f4da140aee22adc991805b6aa1eb7e
Signed-off-by: Ankur Pawar <ankurp@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3086503
Reviewed-by: Praveen AC <pac@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
When ar1335_common.c was ported to K5.15 it was refactored
based on the review comments. During that process index
in mcu_send_ctrl_cmd() was set to 0xFFFF which was causing
issue in setting sensor format. Pass the index from the
caller of mcu_send_ctrl_cmd().
Bug 4389285
Change-Id: Ic84a8de58051fe947f0f4d6597d1a55bc29ef9e6
Signed-off-by: Ankur Pawar <ankurp@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3024535
Reviewed-by: Praveen AC <pac@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
- Integrate calibration data structure from
Leopard Imaging hawk driver into NVIDIA
hawk driver
- Rearrange EEPROM calibration data structure to
maintain backward compatibility with HAWK, OWL
modules with EEPROMs programmed using earlier
calibration data structure
- Use separate structures for tracking imu noise
parameters and place it after the module
serial number.
- Change module serial number length used for
reading the serial number from EEPROM data
L4T-4649
Change-Id: I17613905e63fef3fc690dca42a0a10bd1f4fc24d
Signed-off-by: Praveen AC <pac@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3072846
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following changes are done to reduce 400ms to 200ms:
1> I2c address trans during every power_on is moved to probe time.
Since with virtual-i2c mux IMUs are handled and hence we don't need to
do i2c address trans every time. So once during probe time is enough,
that reduces ~120ms.
2> Reduced sleeping time during start stream call to 20ms, Which reduced
~100ms.
Bug 4180672
Change-Id: I027148f64b892d95e5432394f90bf171156ef9c0
Signed-off-by: Praveen AC <pac@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3072821
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
Reviewed-by: Ankur Pawar <ankurp@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
- Fixes the frame corruption issue encountered
when simultaneously streaming from two
hawks via E3653 GMSL2 board
- Route each serializer output to a different
deserializer output CSI port instead of
routing video data from both serializers
to the same deserializer output port
- Route data through two virtual channels for
each of the two output ports instead of four
virtual channels all through a single output
port
- Fix serdes programming comments
Bug 4032165
Bug 3753423
JEC-286
Change-Id: I7b4e929e9f5330cc6eb0aa72646ce429a713df7a
Signed-off-by: Praveen AC <pac@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3072829
Reviewed-by: Ankur Pawar <ankurp@nvidia.com>
Reviewed-by: Anubhav Rai <arai@nvidia.com>
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Building nv_ar0234 and nv_hawk_owl sensor drivers with GCC 6/7 fails
with the following errors ...
drivers/media/i2c/nv_ar0234.c:797:66: error: initialiser element is not
constant
.compound_ctrl_size = {sizeof(struct NvCamSyncSensorCalibData),
alternating_exposure_cfg_size},
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/i2c/nv_hawk_owl.c:883:59: error: initialiser element is
not constant
.compound_ctrl_size = {sizeof(NvCamSyncSensorCalibData),
alternating_exposure_cfg_size},
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
These older versions of GCC are not able to reconcile the size from the
variable 'alternating_exposure_cfg_size' even though it is defined as
const. Given that the variable 'alternating_exposure_cfg_size' is only
used here, fix this by removing this variable and directly defining the
size in the declaration of the 'compound_ctrl_size' parameter.
Note that the minimum GCC compiler currently supported by the Linux
kernel is v5.1.
Bug 4448563
Change-Id: I4d3ac6eeb961a944901e73a1d92e753cae44220c
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3050272
(cherry picked from commit 8b3ebff940)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3051959
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
The compiler option -Wmissing-prototypes is being enabled globally in
the upstream Linux kernel and this causes build failures for various
drivers. The build failures occur because either the driver is missing
an include file which has the prototype or because the function is not
declared statically when it should be (ie. there are no external users).
Fix the various build failures and enable -Wmissing-prototypes to
prevent any new instances from occurring. Note that the only driver that
is not fixed at the moment is rtl8822ce due to large number of failures
and so build this with '-Wno-missing-prototypes' for now, which is not
different to how it was being compiled prior to this change.
Bug 4404965
Change-Id: Ie5572d23659e0346fa035d645d9043b0a6da5fdc
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3027488
(cherry picked from commit d5391a25ab)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3034644
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
- update ar0234 driver to support ar0234 sensor
hardware provided support for capturing frames
using alternating exposure time and analog gain
settings through automatic context switching
- added new v4l2 control having control id
TEGRA_CAMERA_CID_ALTERNATING_EXPOSURE for
configuring alternating exposure settings
- other changes to support aforementioned changes
Bug 4064517
Jira L4T-4501
Change-Id: Id1d3d745345836436b16da1fd00cc97f2e3b5553
Signed-off-by: Shashank Kumar <shaskumar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2881141
(cherry picked from commit e973475525c9a7a99552282316e06126b8fff625)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2987067
Reviewed-by: Anubhav Rai <arai@nvidia.com>
Reviewed-by: Bibek Basu <bbasu@nvidia.com>
Tested-by: Anubhav Rai <arai@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Upstream commit "7d0b80647f73"
[gpiolib: remove unused gpio_cansleep()]
Removed gpio_cansleep() API as there are no upstream users.
Replace the usage of gpio_cansleep() with gpiod_cansleep(). This is also
backwards compatible with older Kernels.
Bug 4276500
Change-Id: I37230d4371298d724e2311c803409108e93a4fed
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2978834
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
When building the NVIDIA out-of-tree drivers against 3rd party Linux
kernels where V4L2 support is not be enabled by default, the camera
drivers fail to build. Although this is expected, it is preferred that
the driver can still be built but then fail when loaded. Update the
camera drivers to guard around the V4L2 functions so that the drivers
can still be built but will return an error where needed.
Bug 4119327
Change-Id: I3a1115e5f0451153831c396244c01d7525cb51a1
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2979254
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Upstream Linux commit 03c835f498b5 ("i2c: Switch .probe() to not
take an id parameter") removes the 'id' argument from the I2C probe
callback. Update the ov5693 driver, which defines an I2C probe callback
function, to fix building the driver for Linux v6.3.
Bug 4014315
Change-Id: I8c8954b7c1e1e322fb3f560f6348caac54e5e43d
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2919423
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Upstream Linux commit 03c835f498b5 ("i2c: Switch .probe() to not take an
id parameter") removes the 'id' argument from the I2C probe callback.
Update the various sensor drivers, which define an I2C probe callback
function, to fix building the drivers for Linux v6.3.
Bug 4014315
Bug 4075345
Change-Id: I2dc06188d1d19e086f108013c63439d9381d6c58
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2889877
Reviewed-by: Rohit Khanna <rokhanna@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Add ar0234 camera sensor driver code,
max96712 GMSL serializer code, mode tables
and makefile changes. These drivers are copied
from K5.10 camera driver repo. Changes include
svcacv warning fix and eeprom read status is
ignored due to bug 4064490.
Bug 3583587
Bug 4064490
Change-Id: I7ea0ecf959caccafd283c8db5fb7c3be912cf8bb
Signed-off-by: Ankur Pawar <ankurp@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2868422
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Upstream Linux commit 03c835f498b5 ("i2c: Switch .probe() to not take an
id parameter") removes the 'id' argument from the I2C probe callback.
Update the ov5693 driver, which defines an I2C probe callback function,
to fix building the driver for Linux v6.3.
Bug 4014315
Change-Id: Ic037da06b1999801fb62e6ccd39b92fe86b5402a
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2875027
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Upstream Linux commit 03c835f498b5 ("i2c: Switch .probe() to not take an
id parameter") removes the 'id' argument from the I2C probe callback.
Update the drivers which define an I2C probe callback function to fix
building them for Linux v6.3.
Bug 4014315
Change-Id: I1c9924e3b1b6413d385f7d0daa9ef181dadfabe4
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2870268
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
