drivers inside platform tegra and nvdisp
point to display repo.
changing that to nvidia/
Bug 200295104
Change-Id: I91e0356555c251df3eae98218a69f4bc7e3cd208
Signed-off-by: Ishan Mittal <imittal@nvidia.com>
To prevent too many bufferred message from flushing out to serial when
we turn on/off display and blocking other high priority task due to
disabled IRQ, we change some prints to debug level to workaround that
problem as a short-term solution. The long-term will be implemented
later.
bug 200205349
Change-Id: I6609844d5c2ee58b2df6a51e9537bb7dd1448995
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Reviewed-on: http://git-master/r/1326683
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Chun Xu <chunx@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>
use generic APIs tegra_unpowergate_partition() and
tegra_powergate_partition() to unpowergate DISP power
domain needed for CEC without enabling disp clocks so
that display pll clocks are disabled in idle state even
though DISP partition is awake.
Bug 1810989
Change-Id: I37428b9012729a4458724314732f80a571057fd6
Signed-off-by: Santosh Reddy Galma <galmar@nvidia.com>
Reviewed-on: http://git-master/r/1317241
(cherry picked from commit dffb3d3b5fb67cb6920fdbfc72cd3d6c37f0061c)
Provide error recovery from IOCTL to user space.
Bug 1866338
Change-Id: I705ada6c8d4cb13f1c882993468f467da2908fdf
Signed-off-by: Chun XU <chunx@nvidia.com>
Reviewed-on: http://git-master/r/1300499
(cherry picked from commit a646f4903c8794641432fa838a27ee5584944eb5)
Turn on the TV as soon as possible for better user experience
by sending <Text View On> and <ACTIVE SOURCE> CEC commands if
the previous reboot is not recovery. If the previous reboot
reason is recovery, don't send <Text View On> to avoid turning
on TV when there is an auto OTA on-going.
CEC driver uses RESERVED2 logical address as the source address.
Later, the upper layer will send OneTouchPlay command by using
its valid logical address.
Bug 200253563
Change-Id: Iecd759bb50c1f21549f55906e68e3faab905f86b
Signed-off-by: Chun XU <chunx@nvidia.com>
Reviewed-on: http://git-master/r/1277092
(cherry picked from commit 2beab2dcfc4e40712004500df99633d59ae0e70c)
Powergate identifiers are different on Tegra210 and Tegra186,
so add per-SoC match data to use the correct value on each
SoC.
bug 200257351
Change-Id: I81b938386ab9cbaec735baac44ee74fccf39731c
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/1297136
(cherry picked from commit 5438b348e036c31dcf9db0d1364fa6c6ac053428)
Create a symlink for tegra_cec if it is not under platform bus or
it has been created with different name.
Bug 200214224
Bug 200185815
Bug 1764073
Change-Id: Ib2f89db016982ca916894c37e47bbdf177fb617e
Signed-off-by: Chun XU <chunx@nvidia.com>
Reviewed-on: http://git-master/r/1175137
(cherry picked from commit 506e6370d234c4770afb22372ef1955faa7822cf)
Use tegra_nvdisp_unpowergate_partition/tegra_nvdisp_powergate_partition
in Tegra CEC driver to control DISA power domain.
Bug 200214236
Bug 200214232
Bug 200185815
Change-Id: Ib860570f901278e9211b5262fddf8c63a700c5f9
Signed-off-by: Chun XU <chunx@nvidia.com>
Reviewed-on: http://git-master/r/1176912
(cherry picked from commit 8e9f75ac1dadf04a8f89a74dac3e67cd1a06f886)
Unpowergate DISA power domain if it is powergated during CEC driver initialization.
Bug 200175747
Change-Id: I8b3d879fe0c33eaef74c1b4d3b549559c4977e4d
Signed-off-by: Chun XU <chunx@nvidia.com>
Reviewed-on: http://git-master/r/1142593
Reviewed-on: http://git-master/r/1164149
(cherry picked from commit c341176715597fe8268b20b291bcef07bb429500)
Bug 1591149
Initialization of cec engine is slow.
Short-circuit the init in event of suspend.
Change-Id: Ibfbd6f36883a7bf45fdb5137120b041a52f42086
Signed-off-by: Xia Yang <xiay@nvidia.com>
Reviewed-on: http://git-master/r/714423
(cherry picked from commit d5f4a6602678c87e8caa5032e43f2415c314d800)
Reviewed-on: http://git-master/r/716496
Reviewed-on: http://git-master/r/1164147
(cherry picked from commit 82a640a1ea11e850f769b78b5d0c531731b1ffd8)
Auxdata still have to be provided in of_platform_populate()
during early boot device detection to get the device correctly
named as "tegra_cec". Failing to do so will result in device
probe failure as of_device_make_bus_id() will name the device
as "[phys_base].tegra_cec" and cause clock assignment failure.
Bug 200013561
Change-Id: Ib0f898f89146cba7f02cffb768c6a2eb558400ce
Signed-off-by: Xia Yang <xiay@nvidia.com>
Reviewed-on: http://git-master/r/433871
Reviewed-on: http://git-master/r/1164144
(cherry picked from commit 43402b18ee6def21d7d55420f5acd22403e86f1d)
Change write() to work per frame.
Change write() to return -1 on error and set up errno
write() API:
-Userspace is responsible for re-transmission.
-Read from user-space byte by byte, each byte representing
a block, up to 16 bytes as specified by HDMI standard.
-Return 0 on success transmission, -1 otherwise, with errno
setup as follows:
EIO - TX_REGISTER_UNDERRUN, should not happen, otherwise
driver is have serious timing issue.
ECOMM - BUS arbitration failure or anomaly BUS activity.
Transmission is abandoned.
ECONNRESET - For broadcast message only, someone on the BUS
asserted NAK during transmission.
EHOSTUNREACH - For direct message only, message was not ACK'd.
(Required by logical address allocation)
EMSGSIZE - Message size > 16 bit.
EFAULT - Page fault accessing message buffer.
EINTR - call interrupted by singal.
read() API is unchanged, works per packet with no error report.
Change-Id: Iabdd92b5658dd63c7b500a7ec88d79a64c8c0a43
Signed-off-by: Xia Yang <xiay@nvidia.com>
Reviewed-on: http://git-master/r/304664
(cherry picked from commit 6ab7a446c4a3e8e4970ceec5a3c715453a24e4a5)
Signed-off-by: Xia Yang <xiay@nvidia.com>
Reviewed-on: http://git-master/r/347779
Reviewed-on: http://git-master/r/1164143
(cherry picked from commit 67a6c2d3cfbeeca5cb5ed57aae53f34d07decd4f)
Remove wait_event_interruptible() from interrupt context
Change init_done to be atomic_t and reset as early as possible
Bug 1395893
Change-Id: Ib0cf423a3405293000b0c0d9aa105da5bba22e53
Signed-off-by: Xia Yang <xiay@nvidia.com>
Reviewed-on: http://git-master/r/304631
(cherry picked from commit ef034436a3c8aaf7a9ce5dd9ebaf8dc90dbcce4b)
Signed-off-by: Xia Yang <xiay@nvidia.com>
Reviewed-on: http://git-master/r/346042
Reviewed-on: http://git-master/r/1164141
(cherry picked from commit 76e681f957b27323227c9990679631636084b6ae)
cancel the workqueue in suspend method before turning
off the clock
Bug 1360341
Change-Id: I126da686a6ba0c5eec55b67df1e9f962ce16fc48
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/280159
(cherry picked from commit 7cc6da6e41c7889f7ed8da7833d293b3b884bc0e)
Signed-off-by: Xia Yang <xiay@nvidia.com>
Reviewed-on: http://git-master/r/346041
Reviewed-on: http://git-master/r/1164140
(cherry picked from commit e57647e7daacd5a3c22016cbe3f01ddb800d702c)
Add wait_event to make sure that CEC functions
do not execute until CEC init completes
Bug 1283088
Change-Id: I1d26360326338f549a14cbf109a24c2935ebe472
Signed-off-by: Shridhar Rasal <srasal@nvidia.com>
Reviewed-on: http://git-master/r/232566
(cherry picked from commit 6e94e976c1e2121d81d19018b79a97d353b11d70)
Signed-off-by: Xia Yang <xiay@nvidia.com>
Reviewed-on: http://git-master/r/346039
Reviewed-on: http://git-master/r/1164139
(cherry picked from commit 794145e9f8c16c7e36119f3652dd185cf12eb5dc)
In T124, the RX_REGISTER_FULL interrupt is cleared
by reading the RX_REGISTER instead of writing to the
INT_STAT register as before.
Bug 1364229
Change-Id: Ib080a48910304553b0752a3ede55ab0d7653dd77
Signed-off-by: Ankita Garg <ankitag@nvidia.com>
Reviewed-on: http://git-master/r/275982
Reviewed-on: http://git-master/r/1164137
(cherry picked from commit b890e7f50d3d032fc3ede4c4935fdf2c4501f063)
tegra_cec.c: fix warnings as compilation fails after enabling warning as
errors flag
Bug 1258710
Change-Id: Iecd3051d482f5a7488c9f95f6124ad39371f0bd9
Signed-off-by: Benjamin Lu <benjaminl@nvidia.com>
Reviewed-on: http://git-master/r/1164136
(cherry picked from commit 8112e3cd46d11eca51e95cc2fed66d2f7946553a)
READ API:
read API ignores count and will always return 16 bit data.
read API expects user to supply it with min of 16 bits data
it returns CEC packet in following format
bit 0-7: data
bit 8: EOM
bit 9: ACK
WRITE API:
write API ignores count and will always accept 32 bit data.
write API expects user to supply it with min of 32 bits data
it accepts CEC packet supllied in following format
bit 0-7: data
bit 8: EOM
bit 12: Address mode, 0 = Direct, 1 = Broadcast
bit 16: Generate Start bit, 0 = Disable, 1 = Enable
bit 17: Retry frame, 0 = Disable, 1 = Enable
Logical address is set to 4, as of now there is no mechanism to change this
address from userspace.
Driver is disabled by default in Kconfig
Bug 200198493
Change-Id: Ia3835cec0bb717e63dabca5c5fcb1236847bf492
Reviewed-on: http://git-master/r/1164135
(cherry picked from commit 955ec819872e66c4732b38cd74c7ff3a302d95f2)
Signed-off-by: Chun XU <chunx@nvidia.com>
The `cfg_list_item` struct previously defined the `data` array with a zero-length,
which can lead to buffer overflow issues detected by the `fortify_memcpy_chk` function.
So change the zero-length array to a flexible array length.
Bug 4915378
Change-Id: I3420406e73a9eec892665380bb15d680df12e751
Signed-off-by: Shobek Attupurath <sattupurath@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3237079
GVS: buildbot_gerritrpt <buildbot_gerritrpt@nvidia.com>
Reviewed-by: Revanth Kumar Uppala <ruppala@nvidia.com>
Reviewed-by: Ashutosh Jha <ajha@nvidia.com>
Currently, each process holding an open TegraDRM channel reserves
for itself one of the limited number of hardware memory contexts.
Attempting to allocate a channel when all contexts are in use
results in failure.
While we cannot have more contexts than the hardware supports in
active use, idle channels don't necessarily need to have a backing
memory context. As such, in this patch, we add another layer
to allow hardware memory contexts to be "stolen away" by channels
that are in active use, from idle processes.
The way this is implemented, is by keeping track of memory
mappings on each abstracted memory context. If we need to
steal that memory context's backing hardware context, we unmap
everything from it and give it away. When that abstracted
memory context is needed again (re-activated), we attempt
to allocate or steal another hardware context and re-map
the previously unmapped buffers.
Unfortunately, this means additional overhead and unpredictability
at submit time. Submit can fail if we cannot re-allocate a
backing memory context. Future work includes a provision for
un-stealable backing hardware memory contexts for processes
requiring more determinism, as well as optimization and cosmetic
improvements.
Bug 4403250
Bug 4399310
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Change-Id: I3d13e3476f1bff3c4757152254496cddaaafd76a
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3058905
Reviewed-by: Santosh BS <santoshb@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3227749
GVS: buildbot_gerritrpt <buildbot_gerritrpt@nvidia.com>
Tested-by: Dane Liu <danel@nvidia.com>
Reviewed-by: Bibek Basu <bbasu@nvidia.com>
Reduce free memory reported by QueryHeapParams by 0.1% to avoid
OOM issues for Iovmm_heap. For the overall free memory reported
by the query heap params api, page align it to the previous page
to avoid any failures in allocattr due to page align of requested
size, when requested size is equal to reported free size. Update
allocattr api as well so that it checks the available free memory
before allocating.
Bug 4719292
Change-Id: I7ecd69216d58c36ee5d0750107546601400e722d
Signed-off-by: N V S Abhishek <nabhishek@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3165599
(cherry picked from commit 3fdb84d2c8)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3230712
Reviewed-by: Pritesh Raithatha <praithatha@nvidia.com>
Reviewed-by: Ketan Patil <ketanp@nvidia.com>
GVS: buildbot_gerritrpt <buildbot_gerritrpt@nvidia.com>
Allocate the buffer based on the request instead of a fixed buffer
length. In operations which may require larger buffer size, a fixed
buffer may fail. Similar patch was added for AES algorithms. Fix the
same for HASH algorithms as well.
Bug 4908156
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Change-Id: Idd2c1ceae1a85434a5a51154a17dce8c927bb66c
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3234055
GVS: buildbot_gerritrpt <buildbot_gerritrpt@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
In Linux v6.8, the 'g_frame_interval' and 's_frame_interval' function
pointers were removed from the 'v4l2_subdev_video_ops' structure and
replaced by 'get_frame_interval' and 'set_frame_interval' that were
added to the 'v4l2_subdev_pad_ops' structure.
This change was previously fixed for the Tegra CSI driver by adding the
necessary conftest changes. A new update to the Tegra Cam V4L2 causes
the build to fail for Linux v6.8+ kernels because of the same issue. Fix
up the Tegra Cam V4L2 driver in the same way as the Tegra CSI driver,
but update the name of the conftest test to indicate that this is
applicable for both the 'get_frame_interval' and 'set_frame_interval'
function pointers.
Bug 4448428
Bug 4807063
Change-Id: Ica47f3aaece0bf81e2adc3c431056ea51b64a893
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3231775
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
GVS: buildbot_gerritrpt <buildbot_gerritrpt@nvidia.com>
The RealTek drivers do not build against all Linux distributions because
some Linux distributions have back-ported upstream changes and so the
KERNEL_VERSION checks in the driver do not work for these distributions.
Add a compilation flag for the rtl8852ce driver so that we can skip
building of this driver for certain Linux distributions.
Bug 4667769
Change-Id: Ie4ec2308b458e4d5e6a3fa29d5e247c5a709172d
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3231107
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
GVS: buildbot_gerritrpt <buildbot_gerritrpt@nvidia.com>
In Linux v6.12, commit 88a2f6468d01 ("struct fd: representation change")
removed the 'struct file' pointer from 'struct fd'. This breaks building
the NVSCIIPC driver that tries to directly access the 'file' pointer
from the 'fd' structure. Fix this by using the helper macros 'fd_empty'
and 'fd_file' as necessary to fix the build.
Bug 4593750
Change-Id: I0f84736b408f533a732476175a8745091bc8542f
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3217429
(cherry picked from commit 0f21c4134eb08dfcafad832d97308f2d98601f1d)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3226681
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
GVS: buildbot_gerritrpt <buildbot_gerritrpt@nvidia.com>
In Linux v6.12, commit 8c045ca534d0 ("gpiolib: legacy: Kill GPIOF_DIR_*
definitions") removed the GPIOF_DIR_* definitions and updated drivers to
use the equivalent GPIOF_* definitions instead. The GPIOF_* definitions
were added in Linux v3.0 and so update the appropriate drivers to use
these definitions.
Note that when calling devm_gpio_request_one() with GPIOF_DIR_OUT for
the flags, then because no explicit output level is specified, the GPIO
driver core defaults to low. Hence, in this case we replace
GPIOF_DIR_OUT with GPIOF_OUT_INIT_LOW.
Bug 4593750
Change-Id: I05664fd4e0abf5755c9514dffe64b239266c92fa
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3217397
(cherry picked from commit 0c4fc214d92f2a3c91e9c3b9d1245b4c1ee968f4)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3226680
GVS: buildbot_gerritrpt <buildbot_gerritrpt@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
In Linux v6.12, commit f9ecc2febf6f ("pwm: Don't export pwm_capture()")
made pwm_capture an internal function and this broke the build for the
Tegra Tachometer driver. The pwm_capture() function simply calls the
drivers '.capture' callback and so fix this by directly calling the
function pwm_tegra_tacho_capture() instead. Note that the rpm_show()
function is also moved to after the declaration of the
pwm_tegra_tacho_capture() function.
Bug 4876974
Change-Id: Idf7fbc16382a9077c651755d9907ded7652610cc
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3217391
(cherry picked from commit 1f752196cab197f708d75bf7a319e23716a685e0)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/3226679
GVS: buildbot_gerritrpt <buildbot_gerritrpt@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
