Compression carveout is not correct carveout name as it will be used
by gpu even for non-compression usecases. Hence rename it to gpu
carveout.
Bug 3956637
Change-Id: I802b91d58d9ca120e34655c21f56c0da8c8cf677
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2955536
Reviewed-by: Pritesh Raithatha <praithatha@nvidia.com>
Implemented the bridge driver
for MAX96751 HDMI serializer.
In initial version following
features were added.
1) Bring serializer into functional state
2) Drive the RCLKOUT
3) Power management operations
Bug 4069908
Change-Id: Ifbfe5fed3eba5b35303a5072d7eb5935884f1a0f
Signed-off-by: Sagar Tyagi <satyagi@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2905398
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Reviewed-by: Shu Zhong <shuz@nvidia.com>
In new kernel, need to update vm_flags via kernel
provided function. Otherwise below error is met:
./include/linux/mm_types.h:476:20: note: non-static data member
'vm_flags' declared const here
const vm_flags_t vm_flags;
~~~~~~~~~~~~~~~~~^~~~~~~~
1 error generated.
Bug 4196760
Change-Id: I03455af7ce3623d0d8a0f0cd56d569ef3c7af9ea
Signed-off-by: Bruce Xu <brucex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2938942
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
It is nice to have downstream DTB working well with upstream kernel
drivers. This gives a flexibile option for users to choose between
out-of-tree and upstream audio drivers by selectively adding either
of these to deny list.
For clock PLLA_OUT0, upstream DT uses 'plla_out0' clock name where
as downstream uses 'pll_a_out0'. So aligning with upstream DT makes
probe to fail. Thus update the clock name in driver to match upstream
DT bindings.
The sound DT supports compatibles to either work with upstream or
downstream machine drivers. Earlier the source 'tegra_codecs.c' was
modified to make it potentially usable for upstream machine driver
as well and thus it has upstream compatible checks. This check is
now replaced with a flag which is known to be set only during
upstream machine driver probe.
Bug 4119612
Change-Id: Icd5d97343029e35a5702ff4dc527881fb9277346
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2948525
Reviewed-by: Mohan Kumar D <mkumard@nvidia.com>
Reviewed-by: Dara Ramesh <dramesh@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Method invocation for updating count weight for nvdec may conflict
with a job being submitted through host1x.
Change the implementation to set count weight values for both actmon and
the engine once in runtime resume cycle to prevent possible conflicts.
Bug 3962196
Signed-off-by: Johnny Liu <johnliu@nvidia.com>
Change-Id: I19d160abd90373721df78cdb107ca396a206a6e8
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2952692
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
__ioremap function called during cache maint takes more time in case of
multiple processes compared to single process. This is impacting camera
tests when multiple cameras are used. For carveouts, nvmap performs page
by page ioremap and then cache maint on it. Optimize this with following
steps:
- During first cache_maint of the buffer, perform ioremap on entire
buffer and save the kernel V.A.
- Next time, when cache_maint is called on the same buffer, we will
reuse the saved kernel V.A.
Bug 3922175
Change-Id: Iecb372365409de1951bcc8e6f3d8e8e867bb2a80
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2948759
Reviewed-by: Barton Xu (SW-TEGRA) <bartonx@nvidia.com>
Reviewed-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Issue:
L4T platforms on boot comes up with MTU as 1500.
However on changing the MTU to jumbo, the final
MTU which gets set accounts the MACSEC ICV tag
len and reduces the MTU by 34 bytes even though
the platform does not support MACSEC.
Fix:
Assign macsec allocated private data to NULL and
use the NULL check in ndo mtu change ioctl call
to reject MTU reduction if macsec is not supported.
Bug 4137597
Change-Id: Ica3003b54762dd5d240c9b0c5c012049b4e503b2
Signed-off-by: Sushil Kumar Singh <sushilkumars@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2928569
Reviewed-by: Revanth Kumar Uppala <ruppala@nvidia.com>
Reviewed-by: Bibek Basu <bbasu@nvidia.com>
Tested-by: Revanth Kumar Uppala <ruppala@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Block height has valid values > 0 and < 6. Add checks to validate
values to be legal.
Additionally, a value of 0xff indicates channel has no block linear
transfer descriptors. 0xff to be converted to 0.
Bug 4185281
Change-Id: I8a2ff03a4098a27eb0ad6a773abbb50a2cbc50a7
Signed-off-by: omar <onemri@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2944683
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Upstream Linux kernel commit b48b89f9c189 ("net: drop the weight
argument from netif_napi_add") removes the weight argument from the
netif_napi_add() function and this is breaking the build of a few
drivers that use this function. Fix this by updating these drivers
to use the netif_napi_add_weight() function instead for Linux v6.1.
Finally, allow building the realtek wireless driver for kernels other
than v5.15 so that we can ensure it will build against other kernel
versions.
Bug 3750163
Change-Id: If179d044c00bfa83c9902973c642717263d9e3de
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2942057
Reviewed-by: Revanth Kumar Uppala <ruppala@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Below race condition can happen during boot
1) Server calls sivc_reset()
2) Storage client driver has IVC event handler registered, so it gets the event
and it calls ivc_notified()
3) Server gets ivc event, it calls ivc_notified()
( this makes server local state to established )
4) Storage cliend driver also goes to established state
5) After this, storage client driver continued with probe() and
calls ivc_reset() which results in disconnecting the
already established connection.
To fix this race condition, perform ivc_reset in storage client
driver right after tegra_hv_ivc_reserve() before registering
the IVC IRQ handler.
Bug 4125055
Change-Id: I36e6db3479f34fb649bdb8d890f24b1783d10cb9
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2943766
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Reviewed-by: Manish Bhardwaj <mbhardwaj@nvidia.com>
Reviewed-by: Sanjith T D <std@nvidia.com>
Reviewed-by: Vipin Kumar <vipink@nvidia.com>
Tested-by: Manish Bhardwaj <mbhardwaj@nvidia.com>
Issue:
Ethernet mplan stability tests at -20C for 10Mbps fails with rate 15%
Basically the GPHY 10M power saving includes the below parameters,
clock speed down, pll off and reference voltage off.
During debugging it was found that enable/disable pll circuit
frequently when in 10M low data traffic (such as idle mode) may have
a corner case and plays a part in this issue repro.
Fix:
So plloff saving function should be disable (do not have to open it) for nvidia -20C mplan test case.
Bug 3946623
Change-Id: I87ab9b487fe5924ee9ee16bbb14d7f8c19f3a4e7
Signed-off-by: Sushil Kumar Singh <sushilkumars@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2939046
Tested-by: Revanth Kumar Uppala <ruppala@nvidia.com>
Reviewed-by: Revanth Kumar Uppala <ruppala@nvidia.com>
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Signed-off-by: Revanth Kumar Uppala <ruppala@nvidia.com>
(cherry picked from commit 80f6470d40821bfbad8f8166d22442e949b47173)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2942039
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
ether_get_tx_ts, pdata->tx_ts_ref_cnt is an atomic variable
that is used as a mutex in this function and should not return 0
if the function fails to acquire the mutex.
The workqueue is scheduled when the return value of the
judgment function is <0. If one CPU core execution softirq
is running in ether_get_tx_ts function and another CPU core
softirq also calls ether_get_tx_ts function to get hardware
timestamp, then the acquisition of mutex fails and return 0.
After returning 0, the workqueue is not scheduled.
The timestamp cannot be obtained in time. So ether_get_tx_ts
should returns -1 on failure to acquire the mutex.
Bug 4150416
Change-Id: Icffd409b349d8bb8dbf5a483124b3bd3d7ef6cc8
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2934350
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Use '-Werror' and '-Wframe-larger-than' to replace
'-Werror=frame-larger-than' since clang compiler can't
ecognize the combination.
Build failure:
error: unknown warning option '-Werror=frame-larger-than=2560'; did you
mean '-Werror=frame-larger-than='? [-Werror,-Wunknown-warning-option]
Bug 4187941
Change-Id: I4d05a8dc96820517e1047b982a24ed97bb21327f
Signed-off-by: Jian-Min Liu <jianminl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2938229
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Interconnect support for multimedia engines is disable for Linux v6.2
kernels. Rather than always disabling interconnect support for these
kernels, we just need to ensure the necessary upstream kernel patches
are in place for Linux v6.2 kernels. Therefore, enable interconnect
support for all kernels.
Bug 4097374
Change-Id: Ibceb866ba239454a131543cdff90e68007b28942
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2937758
Reviewed-by: Johnny Liu <johnliu@nvidia.com>
Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Add a callback function host1x_syncpt_fence_signaled() to
.signaled op under host1x_syncpt_fence_ops.
.signaled is a optional operation. The change here is a performance
improvement and acts as temporary workaround for sync_file code not
calling enable_signaling.
Bug 4085239
Change-Id: Ief19c2d9af3f504bb1a067bfc9a31b9ef2ecd8fc
Signed-off-by: Santosh BS <santoshb@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2935867
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
If DEBUGFS is not enabled, then the following warning is observed ...
drivers/net/ethernet/nvidia/nvethernet/sysfs.c:3321:6:
error: unused variable [-Werror=unused-variable]
3321 | int ret = 0;
| ^~~
Fix this by ensuring that 'ret' is only defined if the DEBUGFS is
enabled.
Bug 4190165
Change-Id: I0182874592f20abe8d53b7bfdcfd099518b23f9c
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2938450
Reviewed-by: Revanth Kumar Uppala <ruppala@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Building the Tegra RTCPU driver generates the following warning ...
drivers/platform/tegra/rtcpu/tegra-rtcpu-trace.c:
In function ‘rtcpu_trace_exceptions’:
drivers/platform/tegra/rtcpu/tegra-rtcpu-trace.c:331:1:
error: the frame size of 1424 bytes is larger than 1024 bytes
[-Werror=frame-larger-than=]
331 | }
| ^
Allow the frame size to be 2048 bytes to resolve the warning while a
proper fix is implemented.
Bug 4190165
Change-Id: Id684711f036fce759d7a328ad7d63f754a9b46e0
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2938377
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Frank Chen <frankc@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Linux v6.3 updated the GPIO APIs to use GPIO descriptors instead of
indices. This broke the Tegra SPI slave driver and when compiling the
driver for Linux v6.3 various warnings are observed. Update the Tegra
SPI slave driver as necessary to fix support for Linux v6.3.
Bug 4014315
Bug 4190165
Change-Id: Idfa29f729351d2971a649ddbcf1c3e9bf658d160
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2938376
Reviewed-by: Vishwaroop A <va@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Compiling the nvethernet driver without the ccflag CONFIG_TEGRA_NVPPS
defined generates the following warning ...
drivers/net/ethernet/nvidia/nvethernet/ether_linux.c:2936:5:
warning: "CONFIG_TEGRA_NVPPS" is not defined, evaluates to 0 [-Wundef]
2936 | #if CONFIG_TEGRA_NVPPS
| ^~~~~~~~~~~~~~~~~~
Fix this by using '#ifdef' to determine if CONFIG_TEGRA_NVPPS is
defined instead of '#if'.
Bug 4190030
Change-Id: Id1523de6f9ef9f4c72669584efb77ffd9ddf20f3
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2938375
Reviewed-by: Revanth Kumar Uppala <ruppala@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
