Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a.h will include gops_mc.h to contain the mc ops definitions. Add
doxygen comments for the HAL functions that are called directly.
Also move mc_gp10b_intr_pmu_unit_config to non-fusa HAL file.
JIRA NVGPU-2524
Change-Id: I4f326332d7842211b004b372d79fac9fe6ed40e7
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226017
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Changes added to support "rmmod nvgpu" in dgpu simulation after gpu
poweron.
nvgpu_engine-wait_for_idle got stuck in busy mode for nvdec and nvec
engines in simulation as simulation doesnt support timeout.
These engines are not valid engines in nvgpu engine list.
Add nvgpu_engine_check_valid_id before checking engine status.
Simulation crash on accessing 0xb81604 top interrupt register.
Add func_priv_cpu_intr_top__size_1_v() function to get the supported
size than using default MAX_INTR_TOP_REGS.
nvlink is not supprted in dgpu simulation. Avoid warning for
-ENODEV return.
Avoid register read following gpu power off completion.
Bug 2498574
Change-Id: I9f9f1cf1ac4620242bda1d2cc0f29f51f81a6711
Signed-off-by: vinodg <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2179930
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved
-mmu_fault_pending mm ops to is_mmu_fault_pending mc ops
-mmu_fault_pending fb ops to is_mmu_fault_pending fb.intr ops. This
is needed to check if mmu fault intr is pending for volta onwards.
Added
is_mmu_fault_pending fifo ops. This is needed to check if mmu fault
interrupt is pending for chips prior to volta
JIRA NVGPU-1313
Change-Id: Ie8e778387cd486cb19b18c4aee734c581dcd9229
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094895
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved fb interrupt handling related code to fb intr sub-unit.
Moved following hals from fb hal to fb intr hal and renamed to:
void (*enable)(struct gk20a *g);
void (*disable)(struct gk20a *g);
void (*isr)(struct gk20a *g);
gk20a_readl/writel are replaced with nvgpu_read/writel.
Hals are populated with new function names and code is modified
to call new hals.
Moved ecc interrupt to gv11b_fb_intr_handle_ecc in a separate file:
fb_intr_ecc_gv11b.c/h
JIRA NVGPU-2034
Change-Id: I80c7110c902c4e082561cf7cbe65c20eb9acb661
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2090070
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move chip specific mc code from common/mc to hal/mc.
Replace gk20a_readl/writel with nvgpu_readl/writel
Replace 0xFFFFFFFFU with U32_MAX hash define
Change local variable names to fix checkpatch errors/warnings
Change BUG to WARN
Move defines to header files
Create new defines for hard coded delays
JIRA NVGPU-2041
Change-Id: I3594121a81da37ef58c47e87c45e96441e4cf8c7
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2085268
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
