Add characteristic flag NVGPU_GPU_FLAGS_SUPPORT_SYNCPOINT_ADDRESS to indicate if
platform supports semaphore GPU_VA address for a syncpoint
Define NVGPU_SUPPORT_SYNCPOINT_ADDRESS for core driver book keeping
Set this flag for both GV100 and GV11B since Xavier SoC supports a semaphore
GPU_VA address for a syncpoint through syncpoint SHIM
Bug 200327559
Change-Id: I1f31673c9fd59f493d0b35a80d23151fc063ae06
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1649364
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Lots of code paths were split to T19x specific code paths and structs
due to split repository. Now that repositories are merged, fold all of
them back to main code paths and structs and remove the T19x specific
Kconfig flag.
Change-Id: Id0d17a5f0610fc0b49f51ab6664e716dc8b222b6
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1640606
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fix a race condition where we'd still be booting up the gpu and/or
initializing the driver but elsewhere assume that all is done already.
Some userspace APIs to make sure that we're ready by testing
g->gr.sw_ready, but this flag is set in the middle of bootup; there are
other things after gr initialization. Add a new flag that is enabled
after bootup is fully complete at the end of finalize_poweron, and
change the checks in user API paths to test the new flag only.
These checks are only in the ioctl paths for ctrl, dbg and tsg, and in
the ctrl device's opening path.
The gr.sw_ready flag is still left there to signify whether just gr has
had its bookkeeping initialized.
Bug 200370011
Change-Id: I2995500e06de46430d9b835de1e9d60b3f01744e
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1640124
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We use linux specific graphics/compute preemption modes defined in uapi header
(and of below form) in all over common code
NVGPU_GRAPHICS_PREEMPTION_MODE_*
NVGPU_COMPUTE_PREEMPTION_MODE_*
Since common code should be independent of linux specific code, define new modes
of the form in common code and used them everywhere
NVGPU_PREEMPTION_MODE_GRAPHICS_*
NVGPU_PREEMPTION_MODE_COMPUTE_*
Add required parser functions to convert both the modes into each other
For linux IOCTL NVGPU_IOCTL_CHANNEL_SET_PREEMPTION_MODE, we need to convert
linux specific modes into common modes first before passing them to common code
And to pass gpu characteristics to user space we need to first convert common
modes into linux specific modes and then pass them to user space
Jira NVGPU-392
Change-Id: I8c62c6859bdc1baa5b44eb31c7020e42d2462c8c
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1596930
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a hard coded #define for map_buffer_batch_limit and use that
insted of querying from GPU characteristics. Also add an
nvgpu_is_enabled() flag for disabling batch mapping, and set
map_buffer_batch_limit to zero if batch mapping is disabled.
JIRA NVGPU-388
Change-Id: Ic91feea638d0f47c5c22321886cfc75e97259dc3
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1593690
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
max_css_buffer_size was accessed directly from GPU characteristics,
which added a dependency to Linux. Move the field to gr_gk20a and
copy it to GPU characteristics at query time.
JIRA NVGPU-259
Change-Id: Ied19e33bf1a79a9ce45e33df57fe5bbe3a3c4f9d
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1593689
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Peter Daifuku <pdaifuku@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We set the regops limit in common code to a hard coded value and access
it in Linux code. Change the responsibility so that regops limit is
set in Linux code in the GPU characteristics query to a hard coded value
and just use the same hard coded value in the IOCTL limit check.
JIRA NVGPU-259
Change-Id: I2f78a7ea8f1cb68a08633a2dc74b71b3b001e5c9
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1593682
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a new ioctl NVGPU_GPU_IOCTL_SET_DETERMINISTIC_OPTS to adjust
deterministic options on a per-channel basis. Currently, the only
supported option is to relax the no-railgating requirement on open
deterministic channels. This also disallows submits on such channels,
until the railgate option is reset.
Bug 200327089
Change-Id: If4f0f51fd1d40ad7407d13638150d7402479aff0
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1554563
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move gk20a/platform_gk20a.h to linux specific directory as
common/linux/platform_gk20a.h since this file includes all linux specific
stuff
Fix #includes in all the files to include this file with correct path
Remove #include of this file where it is no more needed
Fix gk20a_init_sim_support() to receive struct gk20a as parameter
instead of receiving linux specific struct platform_device
NVGPU-316
Change-Id: I5ec08e776b753af4d39d11c11f6f068be2ac236f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1589938
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Delte the Linux headers and make some modifications to get rid of the
minor compilation issues that resulted.
- Add <linux/iommu.h> to os_linux.h
- Delete #if 0 code that "flushed" a buffer in gr_gk20a.c
- Delete FLUSH_CPU_DCACHE() macro
- Move the cache flush definitions to <nvgpu/linux/vm.h>
and include this header in sim_gk20a.c. This file will
not be used by QNX so this should be fine.
- Add <linux/pci_ids.h> to gp106/bios_gp106.c and
gp106/mclk_gp106.c.
- Move function to common/linux/dmabuf.h since it is a
dmabuf related function and uses a struct device pointer
as an argument.
JIRA NVGPU-30
Change-Id: I11f56b98524c7fac3efa91b4686592130e5f8a46
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1585510
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split the core vidmem allocation from the Linux component of vidmem
allocation. The core vidmem allocation allocates the nvgpu_mem struct
that defines the vidmem buffer in the core MM code. The Linux code
now allocates some Linux specific stuff (dma_buf, etc) and also
allocates the core vidmem buf.
JIRA NVGPU-30
JIRA NVGPU-138
Change-Id: I88e87e0abd5ec714610eacc6eac17e148bcee3ce
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1540708
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below APIs are already declared in ioctl_channel.h, and hence remove duplicate
declaration from channel_gk20a.h
gk20a_channel_open()
gk20a_channel_ioctl()
gk20a_channel_release()
And move declaration of gk20a_channel_open_ioctl() from channel_gk20a.h to
ioctl_channel.h
Jira NVGPU-259
Change-Id: I46702ca481e41a19f92f4fe0169f95e31360abe0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1573106
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split VIDMEM support into its own code files organized as such:
common/mm/vidmem.c - Base vidmem support
common/linux/vidmem.c - Linux specific user-space interaction
include/nvgpu/vidmem.h - Vidmem API definitions
Also use the config to enable/disable VIDMEM support in the makefile
and remove as many CONFIG_GK20A_VIDMEM preprocessor checks as possible
from the source code.
And lastly update a while-loop that iterated over an SGT to use the
new for_each construct for iterating over SGTs.
Currently this organization is not perfectly adhered to. More patches
will fix that.
JIRA NVGPU-30
JIRA NVGPU-138
Change-Id: Ic0f4d2cf38b65849c7dc350a69b175421477069c
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1540705
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
When the L2 flush IOCTL gets no l2 flush and no fb flush we now
return -EINVAL. This can sometimes happen if the user tries to just
invalidate. Currently we do not support L2 invalidates only.
Bug 1661242
Change-Id: I87f3259bfbd736b5f4222cfe7b3cfa4a6475389e
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1227125
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fix a race condition in gk20a_get_channel_from_file() that returns a
channel pointer from an fd: take a reference to the channel before
putting the file ref back. Now the caller is responsible of releasing
the channel reference eventually.
Also document why dbg_session_channel_data has to hold a ref to the
channel file instead of just the channel: that might deadlock if the fds
were closed in "wrong" order.
Change-Id: I8e91b809f5f7b1cb0c1487bd955ad6d643727a53
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1549290
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In order to perform timestamps correlation for FECS
traces, we need to collect GPU / GPU timestamps
samples. In virtualization case, it is possible for
a guest to get GPU timestamps by using read_ptimer.
However, if the CPU timestamp is read on guest side,
and the GPU timestamp is read on vm-server side,
then it introduces some latency that will create an
artificial offset for GPU timestamps (~2 us in
average). For better CPU / GPU timestamps correlation,
Added a command to collect all timestamps on vm-server
side.
Bug 1900475
Change-Id: Idfdc6ae4c16c501dc5e00053a5b75932c55148d6
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: http://git-master/r/1472447
(cherry picked from commit 56f56b5cd9)
Reviewed-on: http://git-master/r/1489183
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_log/info/warn/err() internally add a \n to the end of the message.
Hence, callers should not include a \n at the end of the message. Doing
so results in duplicate \n being printed, which ends up creating empty
log messages. Remove the duplicate \n from all err/warn messages.
Bug 1928311
Change-Id: I99362c5327f36146f28ba63d4e68181589735c39
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-on: http://git-master/r/1487232
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove gk20a_platform dependencies from gk20a.h. This makes
gk20a_platform a Linux platform specific data structure. Add #include
for platform_gk20a.h in the source files that still depend on Linux.
JIRA NVGPU-16
Change-Id: Ib098accd34a1f5066eb8680c387f9b178169f3f0
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1463547
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fix issues related with wrong storage type for
64 bit variables.
(1) Fixed width of HZ_TO_MHZ constant
(2) changed fence_wait timeout to store unsigned
long
bug 200299572
Change-Id: Ie8f2386b738f3aafce75fc2440947e36befac273
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1471611
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Put all debugfs dependencies inside #ifdef CONFIG_DEBUG_FS. This
includes some functions in allocators that were used only for
debugging.
Remove include of linux/debugfs.h on files that do not deal with
debugfs.
linux/debugfs.h implicitly included linux/fs.h, which we relied on.
Add explicit include of linux/fs.h for all files where this is the
case.
Change-Id: I16feffae6b0e3a2edf366075cdc01ade86be06f9
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1467897
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
The following ioctls:
- NVGPU_GPU_IOCTL_WAIT_FOR_PAUSE
- NVGPU_GPU_IOCTL_RESUME_FROM_PAUSE
- NVGPU_GPU_IOCTL_TRIGGER_SUSPEND
- NVGPU_GPU_IOCTL_CLEAR_SM_ERRORS
access hardware registers, so they should make sure that the gpu is
powered on first. Add gk20a_{busy,idle}() pairs for them.
Bug 1849661
Change-Id: I7deabf4a2c1c7d069a6134233f8e86df0a2722c8
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: http://git-master/r/1461449
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove use of linux/kernel.h and linux/compiler.h. We don't use
anything in those headers.
Also replace use of linux/bitops.h with new wrapper nvgpu/bitops.h.
JIRA NVGPU-13
Change-Id: Iefa6b4598d5a5e7fc386c0a7a554e778a87010d6
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1460777
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
gk20a_err() and gk20a_warn() require a struct device pointer,
which is not portable across operating systems. The new nvgpu_err()
and nvgpu_warn() macros take struct gk20a pointer. Convert code
to use the more portable macros.
JIRA NVGPU-16
Change-Id: Ia51f36d94c5ce57a5a0ab83b3c83a6bce09e2d5c
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1331694
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
GVS: Gerrit_Virtual_Submit
Move TSG IOCTL specific code to Linux module. This clears most
Linux dependencies from tsg_gk20a.c.
Move also remaining file_operations declarations from channel_gk20a.h
to ioctl_channel.h.
JIRA NVGPU-32
Change-Id: Idcc2a525ebe12b30db46c3893a2735509c41ff39
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1330805
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split as_gk20a.c into two parts:
common/linux/ioctl_as.c deals with as related devnodes and ioctls.
This file contains all the Linux specific parts of as_gk20a.c.
common/as.c deals with general as_gk20a maintenance and is Linux
independent.
JIRA NVGPU-16
Change-Id: I2d8541e0bd6ce159dc6e4de8e819dfcff0fa8f80
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1330803
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Move all code related to ctrl devnode to under Linux module.
JIRA NVGPU-16
Change-Id: I834b46ec4172076d7bde459168f1e6bc8c5d6c0c
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1330802
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
