This is one of the steps in restructuring of interrupt code.
- Move ISR logic to common code. This will allow us to add mixed ASIL
error handling levels.
- Modify nonstall ISR to use threaded interrupts. Bottom half of
nonstall ISR will run nonstall operations instead of adding work to
workqueues.
- Remove nonstall workqueue implementation.
JIRA NVGPU-6351
Change-Id: I5f891b0de4b0c34f6ac05522a5da08dc36221aa6
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2467713
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following changes are made in this patch.
1) Change unnamed structs within gpu_ops to named structs
with the prefix gops_*.
2) Each named struct gops_ are moved into a separate gops specific file
under include/nvgpu/gops/
3) struct gpu_ops is moved into a separate file include/nvgpu/gpu_ops.h
and all other dependent struct gops_* are included in this header.
4) Direct references to include/nvgpu/gops are removed from files as its enough
to include gk20a.h.
Change-Id: Ieb22cb853be567e3bef14f5f8a04674eebd902ea
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2398776
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Make Recovery and quiesce co-exist to support quiesce state
on unrecoverrable errors. Currently, the quiesce code is wrapped
under ifndef CONFIG_NVGPU_RECOVERY. Isolate the quiesce code from
recovery config, thereby enabling it on all builds.
On Linux, the hung_task checker(check_hung_uninterruptible_tasks()
in kernel/hung_task.c) complains that quiesce thread is stuck for
more than 120 seconds.
INFO: task sw-quiesce:1068 blocked for more than 120 seconds.
The wait time of more than 120 seconds is expected as quiesce
thread will wait until quiesce call is triggered on fatal
unrecoverable errors. However, the INFO print upsets the
kernel_warning_test(KWT) on Linux builds. To fix the failing
KWT, change the quiesce task to interruptible instead of
uninterruptible as checker only looks at uninterruptible tasks.
Bug 2919899
JIRA NVGPU-5479
Change-Id: Ibd1023506859d8371998b785e881ace52cb5f030
Signed-off-by: tkudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2342774
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- "include/trace/events/gk20a.h" file was having GPL2 license
(which should not used for QNX code). This file was used for
compiling linux userspace driver("libnvgpu-drv.so") and was used for
unit testing on QNX.
- This patch removes stubs in "include/trace/events/gk20a.h" file.
(which were used for linux userspace driver.)
- For QNX driver, "nvgpu_rmos/trace/events/gk20a.h" was used.
This patch moves that file to "include/nvgpu/posix/trace_gk20a.h" and
does relevant license change. This same file will be used for linux
userspace driver.
- This patch also creates a new file "include/nvgpu/trace.h" which
selects proper trace file depending on the config.
Bug 2802414
Change-Id: Icdfb251e5698073f986753a969e804161af3ecc5
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2286388
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The atomic counter in interrupt handler can overflow and result in
calling of BUG() which will crash the process. The equivalent
functionality can be implemented with just setting an atomic variable at
start of handler and resetting at end of handler. The wait can be longer
in case there is constant interrupts coming but ultimately it will end.
Generally the wait path is not time critical so it should not be an
issue. Also, fix the unit tests for mc.
Change-Id: I9b8a236f72e057e89a969d2e98d4d3f9be81b379
Signed-off-by: shashank singh <shashsingh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2247819
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a.h will include gops_mc.h to contain the mc ops definitions. Add
doxygen comments for the HAL functions that are called directly.
Also move mc_gp10b_intr_pmu_unit_config to non-fusa HAL file.
JIRA NVGPU-2524
Change-Id: I4f326332d7842211b004b372d79fac9fe6ed40e7
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226017
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu.common.unit was just an enum used for passing to nvgpu.common.mc
APIs. So, move the enum into mc.h, and replace the include of unit.h
with mc.h where appropriate. And update the yaml arch.
JIRA NVGPU-4144
Change-Id: I210ea4d3b49cd494e43add1b52f3fbcdb020a1e3
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2216106
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
IRQs can get triggered during nvgpu power-on due to MMU fault, invalid
PRIV ring or bus access etc. Handlers for those IRQs can't access the
full state related to the IRQ unless nvgpu is fully powered on.
In order to let the IRQ handlers know about the nvgpu power-on state
gk20a.power_on_state variable has to be protected through spinlock
to avoid the deadlock due to usage of earlier power_lock mutex.
Further the IRQs need to be disabled on local CPU while updating the
power state variable hence use spin_lock_irqsave and spin_unlock_-
irqrestore APIs for protecting the access.
JIRA NVGPU-1592
Change-Id: If5d1b5e2617ad90a68faa56ff47f62bb3f0b232b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2203860
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For safety build, nvgpu driver should enter SW quiesce state
in case an uncorrectable error has occurred. In this state, any
activity on the GPU should be prevented, without powering off the GPU.
Also, a minimal set of operations should be used to enter SW quiesce
state.
Entering SW quiesce state does the following:
- set sw_quiesce_pending: when this flag is set, interrupt
handlers exit after masking interrupts. This should help mitigate
an interrupt storm.
- wake up thread to complete quiescing.
The thread performs the following:
- set NVGPU_DRIVER_IS_DYING to prevent allocation of new resources
- disable interrupts
- disable fifo scheduling
- preempt all runlists
- set error notifier for all active channels
Note: for channels with usermode submit enabled, userspace can
still ring doorbell, but this will not trigger any work on
engines since fifo scheduling is disabled.
Jira NVGPU-3493
Change-Id: I639a32da754d8833f54dcec1fa23135721d8d89a
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2172391
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) Update header path of gk20a.h files present in os/
to <nvgpu/gk20a.h>
2) os_fence_android_sema.c indirectly was dependent on gk20a.h via
semaphore.h. So, added #include <nvgpu/gk20a.h> in
os_fence_android_sema.c and replaced the header with forward
declaration of struct gk20a in semaphore.h
Jira NVGPU-597
Change-Id: I96e23befeb80713f3a399071eb5498f6f580211d
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1842868
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move implementation of MC HAL to common/mc. Also bump gk20a
implementation to gm20b.
gk20a_mc_boot_0 was used via a HAL, but we have only one possible
implementation. It also has to be anyway called directly to detect
which HALs to assign, so make it a true common function.
mc_gk20a_handle_intr_nonstall was also used only in os/linux/intr.c
so move it there.
JIRA NVGPU-954
Change-Id: I79aedc9158f90d578db0edc17b714617b52690ac
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1813519
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
