The new SET_BES_CROP_DEBUG3 sw method is used to flip two fields
in the NV_PGRAPH_PRI_BES_CROP_DEBUG3 register. The sw method is
used by the user space driver to disable enough ROP optimizations
to maintain ZBC state of target tiles.
Bug 1942454
Change-Id: I3109fb4120674b15db4998693d0aa65bf0c3c8b5
Signed-off-by: Lauri Peltonen <lpeltonen@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1516205
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add gv11b implementation of gpu_phys_addr() that checks the t19x
GMMU attributes struct to determine if L3 allocation should be
enabled. If L3 alloc is enabled then a special physical address
bit is set.
Add flag NVGPU_AS_MAP_BUFFER_FLAGS_L3_ALLOC to struct
nvgpu_as_map_buffer_ex_args so that User space can add a hint to
allocate buffer in L3 cache
Jira GPUT19X-10
Bug 200279508
Change-Id: I1bb9876a670b252980922aa50e3e69b802be137f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master/r/1512602
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Instead of assuming mask_0 and mask_1 as consecutive registers,
use mask_1 and mask_0 registers for reading/writing sm dbgr warp
and bpt mask registers
JIRA GPUT19X-75
Change-Id: Ib6843d13828d899d4bd3f12bdf6701325ea760fd
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master/r/1511736
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Added handling for below ce interrupts
-INVALID_CONFIG interrupt will be generated if a floorswept
PCE is assigned to a valid LCE in the NV_CE_PCE2LCE_CONFIG
registers. This is a fatal error and the LCE will have to be
reset to get back to a working state.
-MTHD_BUFFER_FAULT interrupt will be triggered if any access to
a method buffer during context load or save encounters a fault.
This is a fatal interrupt and will require at least the LCE to be reset
before operations can start again, if not the entire GPU.
JIRA GPUT19X-12
JIRA GPUT19X-46
Change-Id: I2eeefc4e634f5bf53f20933c493c7594fe0ea755
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master/r/1510298
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Pbdma which encountered the ctxnotvalid interrupt will stall and
prevent the channel which was loaded at the time the interrupt fired
from being swapped out until the interrupt is cleared.
CTXNOTVALID pbdma interrupt indicates error conditions related
to the *_CTX_VALID fields for a channel. The following
conditions trigger the interrupt:
* CTX_VALID bit for the targeted engine is FALSE
* At channel start/resume, all preemptible eng have CTX_VALID FALSE but:
- CTX_RELOAD is set in CCSR_CHANNEL_STATUS,
- PBDMA_TARGET_SHOULD_SEND_HOST_TSG_EVENT is TRUE, or
- PBDMA_TARGET_NEEDS_HOST_TSG_EVENT is TRUE
JIRA GPUT19X-47
Change-Id: If65ce1fcdbaebd6b1d8313fdddf9e3e0fa51e885
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master/r/1329372
GVS: Gerrit_Virtual_Submit
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Add new abstraction file common/linux/nvhost_t19x.c
for all nvhost APIs exported from linux/nvhost_t194.h
This file will be compiled only if config
CONFIG_TEGRA_GK20A_NVHOST is set
Export the new headers from file <nvgpu/nvhost_t19x.h>
Also add dummy private header file nvhost_priv_t19x.h
to store definition of private structure nvgpu_nvhost_dev
This file should be deleted when nvgpu-t19x repo
is merged into common nvhost repo
Jira NVGPU-29
Change-Id: I8c08c9242b08cc45f7c99cc400b3e1a720f9439c
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1493792
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Adding support for ISR handling of GPCCS exceptions
and GCC ECC support
JIRA: GPUT19X-83
Change-Id: Ica749dc678f152d536052cf47f2ea2b205a231d6
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1480997
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
This CL covers the following parity support (uncorrected error),
1) SM's L1 DATA
2) SM's L0 && L1 icache
Volta Resiliency Id - Volta-634
JIRA GPUT19X-113
JIRA GPUT19X-99
Bug 1807553
Change-Id: Iacbf492028983529dadc5753007e43510b8cb786
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: http://git-master/r/1483681
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This CL covers the following parity support (uncorrected error),
1) SM's LRF
2) SM's CBU
Volta Resiliency Id - Volta-637
JIRA GPUT19X-85
JIRA GPUT19X-110
Bug 1775457
Change-Id: I3befb1fe22719d06aa819ef27654aaf97f911a9b
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: http://git-master/r/1481791
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Adding support for ISR handling of ecc uncorrectable errors
for volta resiliency (Volta-686)
TODO: move interrupt init out of MC
bug 1881052
JIRA: GPUT19X-82
Change-Id: I45db01a6062445dd1f64a8297744cd15105e3344
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1476603
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Without these credits, gpu mmu binds over nvlink to soc are hanging.
Also add l2_enabled for mc_elpg_enable.
Bug 1899460
Change-Id: I0b26410d5c8ec9b4c88b319ddd9442f2fd91b321
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/1463204
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
- detect and decode sched_error type. Any sched error starting with xxx_* is
not supported in h/w and should never be seen by s/w
- for bad_tsg sched error, preempt all runlists to recover as faulted ch/tsg
is unknown. For other errors, just report error.
- ctxsw timeout is not part of sched error fifo interrupt. A new
fifo interrupt, ctxsw timeout is added in gv11b. Add s/w handling.
Bug 1856152
JIRA GPUT19X-74
Change-Id: I474e1a3cda29a450691fe2ea1dc1e239ce57df1a
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/1317615
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Context TSG teardown procedure:
1. Disable scheduling for the engine's runlist via NV_PFIFO_SCHED_DISABLE.
This enables SW to determine whether a context has hung later in the
process: otherwise, ongoing work on the runlist may keep ENG_STATUS from
reaching a steady state.
2. Disable all channels in the TSG being torn down or submit a new runlist
that does not contain the TSG. This is to prevent the TSG from being
rescheduled once scheduling is reenabled in step 6.
3. Initiate a preempt of the engine by writing the bit associated with its
runlist to NV_PFIFO_RUNLIST_PREEMPT. This allows to begin the preempt
process prior to doing the slow register reads needed to determine
whether the context has hit any interrupts or is hung. Do not poll
NV_PFIFO_RUNLIST_PREEMPT for the preempt to complete.
4. Check for interrupts or hangs while waiting for the preempt to complete.
During the pbdma/eng preempt finish polling, any stalling interrupts
relating to runlist must be detected and handled in order for the
preemption to complete.
5. If a reset is needed as determined by step 4:
a. Halt the memory interface for the engine (as per the relevant engine
procedure).
b. Reset the engine via NV_PMC_ENABLE.
c. Take the engine out of reset and reinit the engine (as per
relevant engine procedure)
6. Re-enable scheduling for the engine's runlist via NV_PFIFO_SCHED_ENABLE.
JIRA GPUT19X-7
Change-Id: I1354dd12b4a4f0e4b4a8d9721581126c02288a85
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/1327931
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
-implement gv11b specific reset_enable_hw fifo ops
-timeout period in fifo_fb_timeout_r() is set to init instead of max
This register specifies the number of microseconds Host
should wait for a response from FB before initiating a timeout interrupt.
For bringup, this value should be set to a lower value than usual, such as
~.5 milliseconds (500), to help find out bugs in the memory subsystem.
-timeout period in pbdma_timeout_r() is set to init instead of max
This register contains a value used for detecting timeouts.
The timeout value is in microsecond ticks.
The timeouts that use this value are:
GPfifo fetch timeouts to FB for acks, reqs, rdats.
PBDMA connection to LB.
GPfifo processor timeouts to FB for acks, reqs, rdats.
Method processor timeouts to FB for acks, reqs, rdats.
The init value is changed to 64K us based on bug 1816557.
JIRA GPUT19X-74
JIRA GPUT19X-47
Change-Id: I6f818e129c3ea67571d206c5e735607cbfcf6ec6
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/1325352
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Implemented gv11b specific l2 state init and Configured
ltc_ltcs_ltss_cbc_num_active_ltcs_r with following info:
- cbc_num_active_ltcs is read only for gv11b, so did not
write any data to that field.
- enforced serilized access to l2 from sysmem and peermem.
- nvlink connected peer trafic sent through l2
JIRA GV11B-71
Change-Id: I63d9ee3f0a6da62e672a34e207f1f5214b6ed1b4
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: http://git-master/r/1312831
GVS: Gerrit_Virtual_Submit
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
To get maximum number of subctx, sw should read
NV_PGRAPH_PRI_FE_CHIP_DEF_INFO_MAX_VEID_COUNT instead of
LITTER_NUM_SUBCTX.
JIRA GV11B-72
Change-Id: I4d675ba49d8a600da77e7b60da449d9e5ba48971
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: http://git-master/r/1309591
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
In gv11b sync point support is moved to a shim outside of GPU,
and gv11b does not support sync points anymore. Remove use of
the sync point protection.
JIRA GV11B-47
JIRA GV11B-2
Change-Id: I70f3d2ce0cfe016453efe03f2bbf64c59baeb154
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/1300964
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Added thermal registers for gv11b. Implemented chip specific
init_elcg_mode. In thermal control register, engine power auto
control config is removed and added new field for engine holdoff
enable signal.
JIRA GV11B-58
Change-Id: I412d9a232800d25efbdb0a40f14949d3f085fb0e
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: http://git-master/r/1300119
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Update zcull and perfmon buffer pointers in context header.
For gv11b maximum 49 bits gpu va possible. But,
zcull and perfmon buffer pointers uses maximum 41 bit
va address (258 bytes aligned). To accommodate this, high pointer
registers needs to be updated in context header.
JIRA GV11B-48
Change-Id: Ibe62b6bfedd32c4f3721e4d19d96cce58ef0f366
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: http://git-master/r/1291852
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Similar HW header update as has been done for all the other chips.
HW header files are located under:
drivers/gpu/nvgpu/include/nvgpu/hw/gv11b/
And can be included like so:
#include <nvgpu/hw/gv11b/hw_gr_gv11b.h>
Bug 1799159
Change-Id: If39bd71480a34f85bf25f4c36aec0f8f6de4dc9f
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1284433
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
