- struct nvgpu_falcon to hold properties of falcon controller
- falcon controller interface layer which establish access
to required falcon controller HAL based on struct nvgpu_falcon member
flcn_id & flcn_base parameter.
- each falcon nvgpu_falcon struct initialized during init
with id, base-address along with other properties at HAL.
- Added defines related to flacon controller.
Change-Id: Ia7777c01ecc542150ddd72f8603b7b4475522b58
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: http://git-master/r/1467523
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Put all debugfs dependencies inside #ifdef CONFIG_DEBUG_FS. This
includes some functions in allocators that were used only for
debugging.
Remove include of linux/debugfs.h on files that do not deal with
debugfs.
linux/debugfs.h implicitly included linux/fs.h, which we relied on.
Add explicit include of linux/fs.h for all files where this is the
case.
Change-Id: I16feffae6b0e3a2edf366075cdc01ade86be06f9
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1467897
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
perfbuf mapping fixes:
- Allocate VM specifically for perfbuf use: using the PMU's
results in mmu faults for larger buffers where 64k pages are used.
- Make 4GB boundary check work for large address spaces
- remove requirement to have allow_all flag set
- track perfbuf ownership and clean up appropriately
Bug 1880196
JIRA EVLR-1074
Change-Id: Ieee4eb17b64acf9b6ede37bf8e6a91892cda4a7e
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: http://git-master/r/1460809
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move Linux driver specific code to common/linux/module.c. This includes
module initialization, power management, and interrupt functions.
Move pci.c, pci.h and nvgpu_common.c under common/linux as they're
Linux only files.
JIRA NVGPU-16
Change-Id: If92b4dd78ebc0c2bbfa9fbca258e9552e4979b4b
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1456162
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Monitoring INA3221 is currently missing on some customer designs.
Use PCI vendor/device ids and VBIOS version to identify such device,
and set power_sensor_missing flag. This flag is subsequently used
to skip power device and power policy programming in PMU.
Bug 1903258
Change-Id: Ia6b5ce563b5cc3593e138635639025b830e4535e
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: http://git-master/r/1460936
(cherry picked from commit 42f236c210931d28d2699858bb0663b91cf11046)
Reviewed-on: http://git-master/r/1463104
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
From Volta onwards, new DSS ZBC registers are
added for ZBC feature and save/restore of new
ZBC reglist is taken care by ctxsw firmware.
Therefore, PMU should save ZBC reglist only
for PRE-volta chips.
JIRA GPUT19X-20
Change-Id: I7d92274208ca42cc77bf57ea3cc416b5ecf32842
Signed-off-by: Deepak Goyal <dgoyal@nvidia.com>
Reviewed-on: http://git-master/r/1460244
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add nvgpu_* wrappers for determining if we're running in simulation
or silicon, and if we're running in hypervisor.
The new wrappers require struct gk20a pointer, and gk20a_fence_wait()
did not have access to one. Add struct gk20a pointer as the first
parameter.
JIRA NVGPU-16
Change-Id: I73b2b8f091ca29fb1827054abd2adaf583710331
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1331565
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Use nvgpu list APIs instead of linux list APIs
to store pending semaphore waits
Jira NVGPU-13
Change-Id: I42fc6c6233e39f475a939ddd6a81c0cda851b6bf
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1454693
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Renaming was done with the following command:
$ find -type f | \
xargs sed -i 's/struct mem_desc/struct nvgpu_mem/g'
Also rename mem_desc.[ch] to nvgpu_mem.[ch].
JIRA NVGPU-12
Change-Id: I69395758c22a56aa01e3dffbcded70a729bf559a
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1325547
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update the debugging APIs in nvgpu to be more coherent and less dependent
on Linux kernel APIs and data structures. The old API is maintained for
backwards compatibility but the prints themselves are changed.
The old API now prints stuff like this:
[ 46.376077] nvgpu: gk20a_channel_suspend:3430 [DBG] suspend channel 508
[ 46.376242] nvgpu: gk20a_channel_suspend:3430 [DBG] suspend channel 509
[ 46.376359] nvgpu: gk20a_channel_suspend:3430 [DBG] suspend channel 510
[ 46.376466] nvgpu: gk20a_channel_suspend:3430 [DBG] suspend channel 511
[ 46.376604] nvgpu: gk20a_fifo_update_runlist_locked:3090 [DBG] runlist_id : 0, switch to new buffer 0x 4003a0000
[ 46.378348] nvgpu: gk20a_mm_l2_flush:5259 [DBG] l2_flush_dirty 0x2
[ 46.378562] nvgpu: clk_config_pll:170 [DBG] low_PL 1(div1), high_PL 2(div2)
[ 46.378684] nvgpu: clk_config_pll:170 [DBG] low_PL 8(div8), high_PL 17(div17)
Each line starts with 'nvgpu:' since this is the nvgpu driver. Then there's
the function name which is is right justified and post-fixed with a line
number. This keeps all statements lined up so long as the function name does
not exceed the length of characters alloted for function names (33 currently).
Lines are also left justified with 4 available spaces since there are currently
no source files with over 9999 lines. The type of message (DBG, WRN, ERR) is
then printed in brackets. Finally there's whatever message is to be printed.
The new API will be largely the same except there will be an additional
print of the GPU that the message has originated from in order to help debug
cases where both an iGPU and dGPU are active. Also the implicit newline
added in the legacy API has been removed. This is inline with essentially
every other print function in the C world. There are numerous places where
'\n' is added despite it not being needed which results in log files being
littered with blank lines. This makes the logs much harder to read.
Bug ...
Change-Id: I7bc87f2dbbaebf6eb6c9de1a629a0e2963e1804c
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1329487
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split as_gk20a.c into two parts:
common/linux/ioctl_as.c deals with as related devnodes and ioctls.
This file contains all the Linux specific parts of as_gk20a.c.
common/as.c deals with general as_gk20a maintenance and is Linux
independent.
JIRA NVGPU-16
Change-Id: I2d8541e0bd6ce159dc6e4de8e819dfcff0fa8f80
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1330803
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
- check return value of nvgpu_mutex_init in clk_mclk.c
- declare new callback g->ops.pmu.mclk_deinit() to
deinitialize mclk mutexes
- and define this callback for gp106
- add corresponding nvgpu_mutex_destroy calls in
deinitialization
Jira NVGPU-13
Change-Id: I1491c084d330ac9756c9520477e6fe494560e651
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1321294
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
ctrl_gk20a.c had some direct accesses to hardware. These violate the
HAL rules, because we don't have per-GPU ctrl, and thus the code
cannot be made GPU independent.
Move all GR accesses to new GR HALs and use existing bus HAL for
accessing timer. Remove #includes of all hardware headers.
JIRA NVGPU-28
Change-Id: I57e67519f62e9bd6c3e725e1bef6e366190f5834
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1327001
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move code that touches host registers and instance block to fifo HAL.
This involves adding HAL ops for the fifo HAL functions that get
called from outside fifo. This clears responsibility of channel by
leaving it only managing channels in software and push buffers.
channel had member ramfc defined, but it was not used, to remove it.
pbdma_acquire_val consisted both of channel logic and hardware
programming. The channel logic was moved to the caller and only
hardware programming was moved.
Change-Id: Id005787f6cc91276b767e8e86325caf966913de9
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1322423
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the name field from struct gpu_ops up to struct gk20a. The field
is not a function op, so it doesn't belong in gpu_ops.
Replace all uses of dev_name() with use of g->name when possible.
JIRA NVGPU-16
Change-Id: Ic6e99e39258cbf3bb7c806962cbbd7de5126688f
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1328534
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
fifo reset_enable_hw is reorged to clear and enable pbdma/fifo interrupts
after all the required configuration such as configuring timeouts,
enabling timeout detections are taken care of.
JIRA GPUT19X-74
JIRA GPUT19X-47
Change-Id: Id780cc11d858db18f8d748c037954ede73298506
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/1325351
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Clean up gk20a.c by removing direct accesses to MC and moving the
accesses to happen via MC HAL.
The chip detection logic has to violate the HAL and call gk20a
version directly, because HAL ops cannot be set up before chip has
been identified.
Change-Id: I4cdd0ef3fcf7d3b561a3fca4247a8356fe8d18e1
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1321576
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This change refactors the teardown in remove to ensure that it is
possible to unload the driver while leaving fds open. This is achieved
by making sure that the SW state is kept alive till all fds are closed
and by checking that subsequent calls to ioctls after the teardown fail.
Normally, this would be achieved ny calls into gk20a_busy(), but in
kickoff we dont call into that to reduce latency, so we need to check
the driver status directly, and also in some of the functions
as we need to make sure the ioctl does not dereference the device or
platform struct
bug 200277762
JIRA: EVLR-1023
Change-Id: I163e47a08c29d4d5b3ab79f0eb531ef234f40bde
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1320219
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Shreshtha Sahu <ssahu@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Support for hwpm reservations in the virtual case:
- Add session ops for checking and setting global and context reservations, and
releasing reservations
- in the native case, these just update reservation counts and flags
- in the vgpu case, when the reservation count is 0, check with the RM server
that a reservation is possible: for global reservations, no other guest
can have a reservation; for context reservations, no other guest can have
a global reservation
- in the vgpu case, when the reservation count is decremented to 0, notify
the RM server that the guest no longer has any reservations
Bug 1775465
JIRA VFND-3428
Change-Id: Idf115b730e465e35d0745c96a8f8ab6b645c7cae
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: http://git-master/r/1323375
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
After driver remove, the device structure passed in gk20a_busy can be
invalid. To solve this the prototype of the function is modified to pass
the gk20a struct instead of the device pointer.
bug 200277762
JIRA: EVLR-1023
Change-Id: I08eb74bd3578834d45115098ed9936ebbb436fdf
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1320194
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Init device_fatal, channel_fatal and restartable fifo intr pbdma s/w
variables for pbdma_intr_0 interrupt masks for each GPU version separately
pbdma_intr_0 field differences for each GPU version:-
-gk20a : bit 28 does not exists in hw
-gm20b : bit 8(lbreq), 20(xbarconnect) and 28 do not exist in hw
-gp10b : bit 8(lbreq), 20(xbarconnect) do not exist in hw. bit 28,
(syncpoint_illegal) added in hw but is not being handled.
-gk20a/gm20b/gp10b
bit 24 eng_reset and bit 25 semaphore always existed in hw but never
handled
JIRA GPUT19X-47
Change-Id: I209191f57c5ea5b15081b7dc2411801d3537017c
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/1325402
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Simulator support is intermixed with the rest of code in gk20a.c.
Move that code away from gk20a.c to an own file.
Change-Id: Idd3c8795cec5eadc6e49811b5b8ff0592c49a7d2
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1323230
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Tested-by: Bharat Nihalani <bnihalani@nvidia.com>
The main driver structure is not refcounted properly,
so when the driver unload, file desciptors associated to the
driver are kept open with dangling references to the main object.
This change adds referencing to the gk20a structure.
bug 200277762
JIRA: EVLR-1023
Change-Id: Id892e9e1677a344789e99bf649088c076f0bf8de
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1317420
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move all programming of FB to fb_*.c files, and remove the inclusion
of FB hardware headers from other files.
TLB invalidate function took previously a pointer to VM, but the new
API takes only a PDB mem_desc, because FB does not need to know about
higher level VM.
GPC MMU is programmed from the same function as FB MMU, so added
dependency to GR hardware header to FB.
GP106 ACR was also triggering a VPR fetch, but that's not applicable
to dGPU, so removed that call.
Change-Id: I4eb69377ac3745da205907626cf60948b7c5392a
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1321516
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
