CUDA devtools need to be able to flush the GPU's cache
in a sideband fashion and so cannot use methods. This
change implements an nvgpu_gpu_ioctl to flush and
optionally invalidate the GPU's L2 cache and flush fb.
Change-Id: Ib06a0bc8d8880ffbfe4b056518cc3c3df0cc4988
Signed-off-by: sujeet baranwal <sbaranwal@nvidia.com>
Signed-off-by: Mayank Kaushik <mkaushik@nvidia.com>
Reviewed-on: http://git-master/r/671809
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Disable GO_IDLE timeout when pushing SW methods. This stops FE_GI bit
from getting enabled, so remove polling for that, too.
Change-Id: I695aa9fbc68d4fe722ae46a28d7f4cc05db75b3b
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/709878
bug 200069748
Invalidating FECS code instblk is required only if
FECS uses bootloader to load. Added check for same
instead of using PMU support to invalidate.
Handle elpg enable/disable call in case PMU is OFF.
Change-Id: I28abbbbe1f22edd9e0417df9d0e831bbd770502c
Signed-off-by: Deepak Goyal <dgoyal@nvidia.com>
Reviewed-on: http://git-master/r/670664
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Tested-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Supriya Sharatkumar <ssharatkumar@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Add below APIs to dump various GR status registers
1. debugfs : /d/gpu.0/gr_status
Read this debugfs at runtime to get status registers
2. API gk20a_gr_debug_dump()
Add this API in code to dump registers at any point
Bug 200062436
Change-Id: Ic1115b5a2fc16362954b5ed8a9e70afb872a8d91
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/486465
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
bug 200078367
using udelay for fecs status polling
during GR init phase brings down fecs
transaction time to < 20usec from few
hundred usec.
Change-Id: I61a27daaf1187ac086a42779b46aa3fbee3b37f2
Signed-off-by: Vijayakumar <vsubbu@nvidia.com>
Reviewed-on: http://git-master/r/691918
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Use busy looping on L2 and TLB maintenance operations. This speeds
them up by an order of magnitude.
Add also trace points to measure performance for memory ops and
interrupt processing.
Change-Id: Ic4a8525d3d946b2b8f57b4b8ddcfc61605619399
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/681640
CTA preemption needs to be enabled by setting a value in context. Set
it for gm20b.
Bug 200063473
Bug 1517461
Change-Id: I080cd71b348d08f834fd23ebbe7443dba79224db
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/661299
The default zbc entries were never populated in zbc HW table
because the conditional flag "gr->sw_ready" was always set thus
avoided the zbc default loading function call. Now zbc default
loading would happen only during boot time in sw structure.Hw
zbc regs would be loaded from that structure every time a
railgate exit happens.
Bug 1580210
Change-Id: Ie3e40738cbc84cf724c3f3871f15b17a5c84025a
Signed-off-by: Sujeet Baranwal <sbaranwal@nvidia.com>
Reviewed-on: http://git-master/r/662306
Reviewed-by: Sami Kiminki <skiminki@nvidia.com>
Tested-by: Lauri Peltonen <lpeltonen@nvidia.com>
Reviewed-by: Arto Merilainen <amerilainen@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Make mem_desc a generic container for buffers. Add functions for
allocating and mapping buffers to an address space which store their
data in mem_desc.
Change-Id: I031643442c6fd41f5e7222fe9b7bfcaf9b784db5
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/660908
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Make pagepool size query into a function instead of storing the value
during boot time in a structure. This simplifies the structure and
users of pagepool size do not need to worry about whether it has
already been set.
Change-Id: Iba16e840cdf9b6c39449730237aa7d8fdff47848
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/660907
Retrieve number of physical page bits based on chip.
Bug 1567274
Change-Id: I5a0f6a66be37f2cf720d66b5bdb2b704cd992234
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/601700
Turn add ZBC functions into HALs that can be filled per chip.
Bug 1567274
Change-Id: Ic6ef29d3353d4a0079ea0c80f513ffd579fe554f
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/601109
Reviewed-by: Automatic_Commit_Validation_User
Follow steps below to config active TPC number:
echo 1 > /sys/devices/platform/host1x/gpu.0/force_idle
echo 0x1/0x2/0x3 > /sys/devices/platform/host1x/gpu.0/tpc_fs_mask
echo 0 > /sys/devices/platform/host1x/gpu.0/force_idle
where,
0x1 : disable TPC1
0x2 : disable TPC0
0x3 : both TPCs active
Also, add API set_gpc_tpc_mask to update the TPCs and call this
API after update to sysfs "tpc_fs_mask"
Once fuses are updated for new TPC settings, we need to
reconfigure GR and golden_image. Hence disable gr->sw_ready
and golden_image_initialized flags.
Also, initialize gr->tpc_count = 0 each time in
gr_gk20a_init_gr_config(), otherwise it goes on adding tpc count
Bug 1513685
Change-Id: Ib50bafef08664262f8426ac0d6cbad74b32c5909
Signed-off-by: Kevin Huang <kevinh@nvidia.com>
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/552606
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Add the following info into GPU characteristics: available big page
sizes, support indicators for sync fence fds and cycle stats, gpc
mask, SM version, SM SPA version and warp count, and IOCTL interface
levels. Also, add new IOCTL to fetch TPC masks.
Bug 1551769
Bug 1558186
Change-Id: I8a47d882645f29c7bf0c8f74334ebf47240e41de
Signed-off-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-on: http://git-master/r/562904
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Fix below sparse warnings :
warning: Using plain integer as NULL pointer
warning: symbol <variable/funcion> was not declared. Should it be static?
warning: Initializer entry defined twice
Also, remove dead functions
Bug 1573254
Change-Id: I29d71ecc01c841233cf6b26c9088ca8874773469
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/593363
Reviewed-by: Amit Sharma (SW-TEGRA) <amisharma@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Add WARN_ON to a critical error condition to get a backtrace dump.
Bug 200046882
Change-Id: I76c4186024547c6e89f1465612fe17f44e27eefe
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
With CG enabled sometimes fifo could not be idled
during firmware load.
Bug 200042729
Change-Id: I43d7551c0c7c19314c52ac5f678afed8c6df6415
Signed-off-by: Vijayakumar <vsubbu@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Signed-off-by: Vijayakumar <vsubbu@nvidia.com>
Reviewed-on: http://git-master/r/559077
Reviewed-by: Automatic_Commit_Validation_User
Kernel support for allowing a GPU debugger to suspend and resume
SMs. Invocation of "suspend" on a given channel will suspend all
SMs if the channel is resident, else remove the channel form the
runlist. Similarly, "resume" will either resume all SMs if the
channel was resident, or re-enable the channel in the runlist.
Change-Id: I3b4ae21dc1b91c1059c828ec6db8125f8a0ce194
Signed-off-by: sujeet baranwal <sbaranwal@nvidia.com>
Signed-off-by: Mayank Kaushik <mkaushik@nvidia.com>
Reviewed-on: http://git-master/r/552115
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Since the number of TPCs is different between GM20B and GK20a,
the function to look up the number of TPCs needs to be halified.
Change-Id: I19dab9a7105814f86c08c92283a0bb70abb6aa00
Signed-off-by: Mayank Kaushik <mkaushik@nvidia.com>
Reviewed-on: http://git-master/r/500064
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Fix the code that checks if the channel passed in for
regops is resident by also accounting for the TSG id,
if the channel is part of a TSG.
Change-Id: I449344e2887a4de4d55122f4aae5d3d4efabf725
Signed-off-by: Mayank Kaushik <mkaushik@nvidia.com>
Convert GR and LTC HALs to use const structs, and initialize them
with macros.
Bug 1567274
Change-Id: Ia3f24a5eccb27578d9cba69755f636818d11275c
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/590371
Sanitize cyclestats portion of gk20a_gr_handle_notify_pending() a bit
and fix infinite loop and buffer overrun bugs in case of malformed
cyclestate element headers. Also, convert WARN_ON:s to gk20a_err:s for
malformed headers since they are userspace problems and not worth
kernel stack traces.
Bug 1566834
Change-Id: I69fbd85efdb042c5f0e745fac55eeff3aee0faa8
Signed-off-by: Sami Kiminki <skiminki@nvidia.com>
Compute a signature checksum for ctxsw ucode boot section and determine
the format of boot initialization data by it. This unifies gk20a and
gk20b ucode segment loading a lot by separating the bootloader loading
logic to separate functions.
Note: Whenever the boot segment binary changes, its updated signature
must be added here. Management of different bootloaders must be
supported for repo-crossing staging issues.
Bug 1519397
Change-Id: I96f9b905d3631dfdebf71ea3a652a0968615fd0a
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: http://git-master/r/556679
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
We do not need to wait for FE GO_IDLE counter to go to zero between
SW bundles.
Bug 1560770
Change-Id: I4cf53ea4e64b7244c589409d66c67ce8afb4a8d5
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/558305
-Moved bind fecs from work queue to init_gr_support.
-It makes all CPU->FECS communication to happen before
booting PMU, and after we boot PMU, only PMU talks to
FECS. So it removes possibility to race between CPU
and PMU talking to FECS.
Bug 200032923
Change-Id: I01d6d7f61f5e3c0e788d9d77fcabe5a91fe86c84
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/559733
GK20A PMU is not supported in GPU client for virtualization. However,
to make native case and virtualization case can share same defconfig and
kernel image, we need to enable CONFIG_GK20A_PMU and
CONFIG_GK20A_DEVFREQ in defconfig. This commit changes to detect if we
should disable GK20A PMU support in run time.
Bug 200041597
Change-Id: I292c647303ed57af6faa1c5671037ca27b48e31e
Signed-off-by: Haley Teng <hteng@nvidia.com>
Reviewed-on: http://git-master/r/553653
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
At this stage, ctxsw is always in reset state, because we're powering GPU
up, or we have reset the whole GR partition. Remove the code to invoke a
second reset.
Fix waiting for FE idle. We should wait after each bundle, and break if any
iteration fails.
Change-Id: I0846f67c6d860a485dea62ff870deafe55a47365
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/552799
Move nvgpu ioctls from the many user space interface headers to a new
single nvgpu.h header under include/uapi. No new code or replaced names
are introduced; this change only moves the definitions and changes
include directives accordingly.
Bug 1434573
Change-Id: I4d02415148e437a4e3edad221e08785fac377e91
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: http://git-master/r/542651
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
To help remove the nvhost dependency from nvgpu, rename ioctl defines
and structures used by nvgpu such that nvhost is replaced by nvgpu.
Duplicate some structures as needed.
Update header guards and such accordingly.
Change-Id: Ifc3a867713072bae70256502735583ab38381877
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: http://git-master/r/542620
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Restrict reading of FE object table to the number of entries
available.
Change-Id: I11275ecd14e53f0b763d00d65042adb4b1e8ae6f
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/449306
Add poll interface and control ioctls for waiting for GPU job completion
via semaphores.
Poll on a gk20a channel file waits for events from pending semaphore
interrupts (stalling) of that channel. New ioctls enable and disable the
events, and clear a single interrupt event so that next poll doesn't
wake up for it again.
Bug 1528781
Change-Id: I5c6238966b5d0900c8ab263c6a7f8f2611901f33
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: http://git-master/r/497750
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
