Move implementation of fuse HAL to common/fuse. Also implements new
fuse query functions for FBIO, FBP, TPC floorsweeping and security
fuses.
JIRA NVGPU-957
Change-Id: I55e256a4f1b59d50a721d4942907f70dc57467c4
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1797177
MISRA Rule-15.6 requires that all loop bodies must be enclosed in braces
including single statement loop bodies. This patch fix the MISRA
violations due to single statement loop bodies without braces by adding
them.
JIRA NVGPU-989
Change-Id: If79f56f92b94d0114477b66a6f654ac16ee8ea27
Signed-off-by: Srirangan <smadhavan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1791194
Reviewed-by: Adeel Raza <araza@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In the current code, gk20a.h includes io.h which gets directly included
in a lot of other files. io.h contains methods which uses a struct
gk20a as a parameter leading to a circular dependency between io.h
and gk20a.h. This can be mitigated by removing io.h from gk20a.h as
part of larger effort to moving gk20a.h to nvgpu/gk20a.h
JIRA NVGPU-597
Change-Id: I93e504fa9371b88152737b342a75580c65e8f712
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1787316
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Write new pm mode to context buffer header. Ucode use
this mode to enable mode-e context switch. This is Mode-B
context switch of PMs with Mode-E streamout on one context.
If this mode is set, Ucode makes sure that Mode-E pipe
(perfmons, routers, pma) is idle before it context switches PMs.
- This allows us to collect counters in a secure way
(i.e. on context basis) with stream out.
Bug 2106999
Change-Id: I5a7435f09d1bf053ca428e538b0a57f3a175ac37
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1760366
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Separate HAL added in gv11b and gv100 for
init_gpc_mmu function.
In gv11b HAL, RMW is enabled for gpu atomics
as default.
In gv100 HAL, GPC atomic capability mode will
get set based on the FB MMU capability.
If GPU is connected through NVLINK then mmu
will be set to RMW mode, else it will be in
L2 mode.
Bug 200390336
Change-Id: I224934f83d1762ec864ef8da7265dd01d86893a0
Signed-off-by: Ashish Srivastava <assrivastava@nvidia.com>
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1735137
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gr_gv11b/gk20a_create_priv_addr_table() we do not consider floorswept FBPAs
and just calculate the unicast list assuming all FBPAs are present
This generates incorrect list of unicast addresses
Fix this introducing new HAL ops.gr.split_fbpa_broadcast_addr
Set gr_gv100_get_active_fpba_mask() for GV100
Set gr_gk20a_split_fbpa_broadcast_addr() for rest of the chips
gr_gv100_get_active_fpba_mask() will first get active FPBA mask and generate
unicast list only for active FBPAs
Bug 200398811
Jira NVGPU-556
Change-Id: Idd11d6e7ad7b6836525fe41509aeccf52038321f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1694444
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GV100 ucode is changed so that it expects LIST_nv_perf_pma_ctx_reg list in
ctxsw buffer to be 256 byte aligned but same change is not applied to other
chip ucodes
ADD new HAL (*add_ctxsw_reg_perf_pma) to configure PMA register list and
define a common HAL gr_gk20a_add_ctxsw_reg_perf_pma() for all other
chips except GV100
Define a separate HAL for GV100 gr_gv100_add_ctxsw_reg_perf_pma() and fix
the required alignment in this function
Bug 1998067
Change-Id: Ie172fe90e2cdbac2509f2ece953cd8552e66fc56
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1676655
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For LIST_nv_pm_fbpa_ctx_regs, we right now call
add_ctxsw_buffer_map_entries_subunits() to add registers corresponding
to all the FBPAs
But while configuring total number of registers, we do not consider
floorswept FBPAs and that causes misalignment in subsequent lists for GV100
Fix this by reading disabled/floorswept FBPAs from fuse and consider only those
FBPAs which are active for GV100
Add new HAL (*add_ctxsw_reg_pm_fbpa) to support this setting and define a
common HAL gr_gk20a_add_ctxsw_reg_pm_fbpa() for all chips except GV100
Define GV100 specific gr_gv100_add_ctxsw_reg_pm_fbpa() with above mentioned
implementation to consider floorsweeping
Bug 1998067
Change-Id: Id560551bb0b8142791c117b6d27864566c90b489
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1676654
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Lots of code paths were split to T19x specific code paths and structs
due to split repository. Now that repositories are merged, fold all of
them back to main code paths and structs and remove the T19x specific
Kconfig flag.
Change-Id: Id0d17a5f0610fc0b49f51ab6664e716dc8b222b6
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1640606
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
On gv11b we can have multiple SMs per TPC. Add sm_per_tpc in
vgpu constants to properly dimension the virtual SM to TPC/GPC
mapping in virtualization case.
Use TEGRA_VGPU_CMD_GET_SMS_MAPPING to query current mapping.
Bug 2039676
Change-Id: I817be18f9a28cfb9bd8af207d7d6341a2ec3994b
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1631203
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For SCG to work, smid numbering needs to be done
based on scg performance of tpcs. For gv11b and
gv11b vgpu, reuse gv100 function "gr_gv100_init_sm_id_table"
to do this.
Used local variable "index" to avoid multiple computations in
the function: gr_gv100_init_sm_id_table
index = sm_id + sm
Add deug info for printing initialized gpc/tpc/sm/global_tpc
indexs.
Bug 1842197
Change-Id: Ibf10f47f10a8ca58b86c307a22e159b2cc0d0f43
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1583916
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
SMID tables were generated according with the local tpc and the pagepool and cb
buffers from a different chip and did not take performance in consideration,
which made compute kernels hang with CTAs on the fly.
This change ensures we are using the right sizes and adds proper enumeration
of smids.
JIRA: NVGPUGV100-36
bug 2004378
Change-Id: Ic8f50c325d6d6720cca41d9740ae4f5f51e1100a
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1581664
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
