VBIOS link_disable_mask should be sufficient to find the connected
links. As VBIOS is not updated with correct mask, we parse the DT
node where we hardcode the link_id. DT method is not scalable as same
DT node is used for different dGPUs connected over PCIE. Remove the
DT parsing of link id and use HAL to get link_mask based on the GPU.
JIRA NVLINK-162
Change-Id: Idb7b639962928ce48711a0d7fc277c4c324bee91
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1738967
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The sequence of INIT* minion dlcmd varies between nvlink 2.0 and 2.2.
The order is strict for 2.2. Also there are new dlcmds added to the
nvlink bringup sequence. Add HAL to allow sequence update for nvlink 2.2.
Old sequence:
INITLANEENABLE-> INITDLPL
New Sequence:
INITDLPL->INITDLPL_TO_CHIPA->INITTL->INITLANEENABLE
JIRA NVLINK-176
Change-Id: I49e0a726f56e7d6122ac4cddf0f0e021d16f1926
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1738329
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Before nvlink 2.2, driver was responsible for setting the NVLink clocks
during NVLink initialization. For the purpose of security, NVLink PLL
handling is moved to Minion in nvlink 2.2 and driver should stop writing
to these registers.
JIRA NVLINK-167
Change-Id: I18392a29c322da55053037bfde62c8f74ee75288
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1730597
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
RXDET is supported only on nvlink 2.2 devices and forward.
Add HAL to run RXDET selectively based on chip. RXDET needs to be
done after the links are out of reset but before any other link
level initialization.
minion_send_cmd is also made non-static to support RXDET
functionality.
JIRA NVLINK-160
Change-Id: Ic65b8dbc7281743f62072089ff3c805521ac9b38
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1729525
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following changes implements the initial (as per bringup) nvlink driver.
(1) SW initialization of nvlink core driver structures
(2) Nvlink interrupt handling
(3) Device initialization (IOCTRL, pll and clocks, device level intr)
(4) Falcon support for minion
(5) Minion load and bootstrapping
(6) Link initialization and DL PROD settings
(7) Device Interface init (and switching HSHUB to nvlink)
(8) HS set/get mode for both link and sublink
(9) Topology discovery and VBIOS settings.
(10) Ensures we get physical contiguous memory when Nvlink is enabled
This driver includes a hack for the current single dev/single link limitation.
JIRA: EVLR-2331
JIRA: EVLR-2330
JIRA: EVLR-2329
JIRA: EVLR-2328
Change-Id: Idca9a819179376cc655784482b24b575a52fa9e5
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1656790
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
