Added the following HALs
- ramin.base_shift
- ramin.alloc_base
Use above HALs in mm, instead of using hw definitions.
Defined nvgpu_inst_block_ptr to
- get inst_block address,
- shift if by base_shift
- assert upper 32 bits are 0
- return lower 32 bits
Added missing #include for <nvgpu/mm.h>
Jira NVGPU-3015
Change-Id: I558a6f4c9fbc6873a5b71f1557ea9ad8eae2778f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077840
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved enable/disable HALs from fifo to tsg:
- tsg.enable
- tsg.disable
gk20a_tsg_enable and gv11b_tsg_enable are moved to HAL,
since they are chip specific, even though they do not
directly access chip registers.
Removed vgpu_gv11b_tsg_enable as it was identical to
gv11b_tsg_enable.
Changed gv11b_fifo_locked_abort_runlist_active_tsgs and
gv11b_fifo_teardown_ch_tsg to use tsg.enable HAL instead
of calling directly gk20a_disable_tsg HAL implementation.
Jira NVGPU-2979
Change-Id: I721650c64dcf8cd158652e362292af45df43819f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2083156
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.fifo.userd unit has both safe as well as non-safe functions.
The build flag NVGPU_USERD is used to restrict the use of
non-safe functions of the userd unit in safety builds.
Jira NVGPU-2713
Change-Id: Idf3b244b24816789892ea802c2dcb42ca92649e1
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2075928
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new unit vgpu subctx under common/vgpu/gr to manage
GR subcontext. This unit provides interfaces to allocate
and free subctx header.
Rename vgpu_subctx_gv11b* files to subctx_vgpu* files
renaming functions vgpu_gv11b_alloc_subctx_header to
vgpu_alloc_subctx_header and vgpu_gv11b_free_subctx_header
to vgpu_free_subctx_header which are called only if
NVGPU_SUPPORT_TSG_SUBCONTEXTS is enabled or free_channel_ctx_header
HAL op is set which is set only for gv11b for virtualization.
Also assign fifo HAL op free_channel_ctx_header to
vgpu_channel_free_ctx_header for vgpu gv11b which in turn
calls vgpu_free_subctx_header.
Jira GVSCI-334
Change-Id: Ib46e7be911632eba01cd21881077683b795f8bad
Signed-off-by: Aparna Das <aparnad@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2075872
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Native and vgpu were using different paths for fifo
init/deinit code.
Use same nvgpu_fifo_init_support for init code:
nvgpu_fifo_init_support
g->ops.fifo.setup_sw
vgpu_fifo_setup_sw (NEW)
Use same nvgpu_fifo_remove_support for deinit code:
nvgpu_fifo_remove_support (NEW)
g->ops.fifo.cleanup_sw (NEW)
vgpu_fifo_cleanup_sw (NEW)
Also implemented gk20a_fifo_cleanup_sw for native case.
Jira NVGPU-1306
Jira NVGPU-2855
Change-Id: Iefe303cc224f804a206422e2efffda9da1616d89
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2029649
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add fifo sub-unit to common.fifo to handle init/deinit code
and global support functions.
Split init into:
- nvgpu_channel_setup_sw
- nvgpu_tsg_setup_sw
- nvgpu_fifo_setup_sw
- nvgpu_runlist_setup_sw
- nvgpu_engine_setup_sw
- nvgpu_userd_setup_sw
- nvgpu_pbdma_setup_sw
Split de-init into
- nvgpu_channel_cleanup_sw
- nvgpu_tsg_cleanup_sw
- nvgpu_fifo_cleanup_sw
- nvgpu_runlist_cleanup_sw
- nvgpu_engine_cleanup_sw
- nvgpu_userd_cleanup_sw
- nvgpu_pbdma_cleanup_sw
Added the following HALs
- runlist.length_max
- fifo.init_pbdma_info
- fifo.userd_entry_size
Last 2 HALs should be moved resp. to pbdma and userd sub-units,
when available.
Added vgpu implementation of above hals
- vgpu_runlist_length_max
- vgpu_userd_entry_size
- vgpu_channel_count
Use hals in vgpu_fifo_setup_sw.
Jira NVGPU-1306
Change-Id: I954f56be724eee280d7b5f171b1790d33c810470
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2029620
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The corresponding HAL pointer for gk20a_fifo_wait_engine_idle is not
being invoked anywhere and hence they are removed from the code.
The function gk20a_fifo_wait_engine_idle belongs to engine unit and is
only called in a non-safe build, hence its moved to engine unit and is
restricted by a non-safe build flag NVGPU_ENGINE
Also, gk20a_fifo_wait_engine_idle is renamed to nvgpu_engine_wait_for_idle
Jira NVGPU-1315
Change-Id: Ie550c7e46a4284dfe368859d828b1994df34185f
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2033631
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This reverts commit ade1d50cbe.
Currently a fifo_runlist_info_gk20a structure is allocated and
initialized for each possible runlist. But only a few runlists
are actually used.
Use an array of pointers to runlists in fifo_gk20a. The array
keeps existing indexing by runlist_id. In this patch a context
is still allocated for each possible runlist, but follow up
patch will allow to skip context allocation for inactive
runlists.
Bug 2470115
Bug 2522374
Change-Id: I0deb6981bc6f5152bdf121f0a44429748aa14687
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030407
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently a fifo_runlist_info_gk20a structure is allocated and
initialized for each possible runlist. But only a few runlists
are actually used.
Use an array of pointers to runlists in fifo_gk20a. The array
keeps existing indexing by runlist_id. In this patch a context
is still allocated for each possible runlist, but follow up
patch will allow to skip context allocation for inactive
runlists.
Bug 2470115
Change-Id: I1615043cea84db35a270ade64695d51f85c1193a
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2025203
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create a new directory fifo under common vgpu path moving all
vgp common fifo files under that directory.
Move vgpu runlist implementations to a new file runlist_vgpu.c
and create corresponding header file.
Also fix lines over 80 chars in fifo_vgpu.c
Jira GVSCI-334
Change-Id: Ic00535b22a6066a0d27435b9a987de7fa701ea05
Signed-off-by: Aparna Das <aparnad@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2011762
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
