This patch does the following:
- Defines a new flag "CONFIG_NVGPU_ENABLE_MISC_EC" when the
build is not targeted for RM Server. Since iGPU is in pass-through
mode in both safety and standard build, EPL libraries will not be
included in RM Server. This is done with the help of the flag
"NV_BUILD_CONFIGURATION_IS_VM_SERVER".
- Updates error id that will be reported to Safety_Services. The
format of the error ID is:
- HW_unit_id: (4-bits: bit 0 to 3),
- Error_id: (5-bits: bit 4 to 8),
- Corrected/Uncorrected error: (1-bit: bit-9),
- Remaining 22-bits are unused.
- Defines macros that will be used to form error ID.
- Defines a macro for SW_ERR_CODE_0 register which is allocated for
NvGPU to report errors to Safety_Services via MISC_EC.
JIRA NVGPU-8094
Change-Id: I02f37db75ef3b82952ef5f196f4e065d6c5d1a3e
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2677373
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch does the following changes:
- Compiles-out unused error reporting APIs and the related
data structures from safety build. For this purpose, it
introduces the new flag: CONFIG_NVGPU_INTR_DEBUG
- Updates nvgpu_report_err_to_sdl() API with one more argument,
hw_unit_id. This aids in finding whether an error to be reported
is corrected or uncorrected from LUT.
- Triggers SW quiesce, if an uncorrected error is reported to
Safety_Services, in safety build.
- Renames files in cic folder by replacing gv11b with ga10b,
since error reporting for gv11b is not supported in dev-main.
JIRA NVGPU-8002
Change-Id: Ic01e73b0208252abba1f615a2c98d770cdf41ca4
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2668466
Reviewed-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit
In DRIVE 6.0, NvGPU is allowed to report only 32-bit metadata to
Safety_Services. So, there is no need to have distinct APIs for
reporting errors from units like GR, MM, FIFO to SDL unit. All
these error reporting APIs will be replaced with a single API. To
meet this objective, this patch does the following changes:
- Replaces nvgpu_report_*_err with nvgpu_report_err_to_sdl.
- Removes the reporting of error messages.
- Replaces nvgpu_log() with nvgpu_err(), for error reporting.
- Removes error reporting to Safety_Services from nvgpu_report_*_err.
However, nvgpu_report_*_err APIs and their related files are not
removed. During the creation of nvgpu-mon, they will be moved under
nvgpu-rm, in debug builds.
Note:
- There will be a follow-up patch to fix error IDs.
- As discussed in https://nvbugs/3491596 (comment #12), the high
level expectation is to report only errors.
JIRA NVGPU-7450
Change-Id: I428f2a9043086462754ac36a15edf6094985316f
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2662590
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
In DRIVE 6.0, NvGPU needs to support error reporting in QNX-Safety,
QNX-Standard, and Linux. To support error reporting in all these
platform variants, SDL unit will be moved from QNX to common code.
As part of this refactoring activity, this patch removes ops assignment
for report error. Also, it removes API calls that are used to take
time-stamp for stall interrupt thread. This time-stamp APIs will be
brought back later, if required to support periodic diagnostics.
JIRA NVGPU-7353
Change-Id: I38536019dc7165e6a97674863b37d009854af948
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2655958
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Shashank Singh <shashsingh@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Most of the Orin chip specific code is compiled out of safety build
with CONFIG_NVGPU_NON_FUSA and CONFIG_NVGPU_HAL_NON_FUSA. Remove the
config protection from Orin/GA10B specific code. Currently all code
is enabled. Code not required in safety will be compiled out later
in separate activity.
Other noteworthy changes in this patch related to safety build:
- In ga10b_ce_request_idle(), add a log print to dump num_pce so that
compiler does not complain about unused variable num_pce.
- In ga10b_fifo_ctxsw_timeout_isr(), protect variables active_eng_id and
recover under CONFIG_NVGPU_KERNEL_MODE_SUBMIT to fix compilation
errors of unused variables.
- Compile out HAL gops.pbdma.force_ce_split() from safety since this HAL
is GA100 specific and not required for GA10B.
- Compile out gr_ga100_process_context_buffer_priv_segment() with
CONFIG_NVGPU_DEBUGGER.
- Compile out VAB support with CONFIG_NVGPU_HAL_NON_FUSA.
- In ga10b_gr_intr_handle_sw_method(), protect left_shift_by_2 variable
with appropriate configs to fix unused variable compilation error.
- In ga10b_intr_isr_stall_host2soc_3(), compile ELPG function calls
with CONFIG_NVGPU_POWER_PG.
- In ga10b_pmu_handle_swgen1_irq(), move whole function body under
CONFIG_NVGPU_FALCON_DEBUG to fix unused variable compilation errors.
- Add below TU104 specific files in safety build since some of the code
in those files is required for GA10B. Unnecessary code will be
compiled out later on.
hal/gr/init/gr_init_tu104.c
hal/class/class_tu104.c
hal/mc/mc_tu104.c
hal/fifo/usermode_tu104.c
hal/gr/falcon/gr_falcon_tu104.c
- Compile out GA10B specific debugger/profiler related files from
safety build.
- Disable CONFIG_NVGPU_FALCON_DEBUG from safety debug build temporarily
to work around compilation errors seen with keeping this config
enabled. Config will be re-enabled in safety debug build later.
Jira NVGPU-7276
Change-Id: I35f2489830ac083d52504ca411c3f1d96e72fc48
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2627048
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move interrupt specific data-members from common.mc to common.cic
Some of these data members like sw_irq_stall_last_handled_cond need
To be initialized much earlier during the OS specific init/probe stage.
Also, some more members from struct nvgpu_interrupts(like stall_size,
stall_lines[]), which will soon be moved to CIC will also need to be
initialized early during the OS specific probe stage.
However, the chip specific LUT can only be initialized after the
hal_init stage where the HALs are all initialized.
Split the CIC init to accommodate the above initialization requirements.
JIRA NVGPU-6899
Change-Id: I9333db4cde59bb0aa8f6eb9f8472f00369817a5d
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2552535
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.cic unit is divided into common.cic.mon and common.cic.rm
based on rm and mon process split.
CIC-mon subunit includes the code which is utilized in critical
interrupt handling path like initialization, error detection and
error reporting path. CIC-rm subunit includes the code corresponding
to rest of interrupt handling(like collecting error debug data from
registers) and ISR status management (status of deferred interrupts).
Split the CIC APIs and data-members into above two subunits.
JIRA NVGPU-6899
Change-Id: I151b59105ff570607c4a62e974785e9c1323ef69
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551897
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
