CBC contig allocation requires mempool node in DT and the
node can be used for contig allocations. The code duplication
can be avoided by unifying the code from vgpu.
Change-Id: I6eaa1d0c9db47b158602bf0ba68ce4e09cf487a7
Signed-off-by: Dinesh T <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2650459
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-by: Ankur Kishore <ankkishore@nvidia.com>
GVS: Gerrit_Virtual_Submit
This patch performs the following improvements for VAB:
1) It avoids an infinite loop when collecting VAB information.
Previously, nvgpu incorrectly assumed that the valid bit would
be eventually set for the checker when polling. It may not be set
if a VAB-related fault has occurred.
2) It handles the VAB_ERROR mmu fault which may be caused for various
reasons: invalid vab buffer address, tracking in protected mode,
etc. The recovery sequence is to set the vab buffer size to 0 and
then to the original size. This clears the VAB_ERROR bit. After
reseting, the old register values are again set in the recovery
code sequence.
3) Use correct number of VAB buffers. There's only one VAB buffer on
ga10b, not two.
4) Simplify logic.
Bug 3374805
Bug 3465734
Bug 3473147
Change-Id: I716f460ef37cb848ddc56a64c6f83024c4bb9811
Signed-off-by: Martin Radev <mradev@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2621290
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Now that the main nvsched code exists in the nvgpu build, make it
control the runlist domains. As a new nvs domain is created, create the
relevant runlist data too. To support the default domain, create a
default nvs domain at boot.
The scheduling domain code owns the responsibility of domain lifetime,
and runlist domains exist to serve that logic although the RL domains
are directly used by channel and TSG logic. Add refcounting to the
scheduler uapi level to make sure that busy domains (that still have TSG
participants) do not get removed too early.
Adjust error injection sensitive unit tests to match the updated logic.
Jira NVGPU-6425
Jira NVGPU-6427
Change-Id: I1beec97c54c60ad334165b1c0acb5e827c24f2ac
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2632287
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Start transitioning from an assumption of a single runlist buffer to the
domain based approach where a TSG is a participant of a scheduling
domain that then owns has a runlist buffer used for hardware scheduling.
Concretely, move the concept of a runlist domain up to the users of the
runlist code. Modifications to a runlist need to specify which domain is
modified.
There is still only the default domain that is created at boot.
Jira NVGPU-6425
Change-Id: Id9a29cff35c94e0d7e195db382d643e16025282d
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2621213
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Move the active_channels and active_tsgs bitmaps from struct
nvgpu_runlist to struct nvgpu_runlist_domain. A TSG and its channels are
currently active as part of a runlist; in the future, a runlist may be
switched from multiple domains that each are a collection of TSGs.
The changes are still internal to the runlist code. Users of runlists
need no modifications.
Jira NVGPU-6425
Change-Id: I2d0e98e97f04b9716bc3f4890cf881735d0ab664
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2618387
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The current runlist code assumes a single runlist buffer to hold all TSG
and channel entries. Create separate RL domain and domain memory types
to hold data that is related to only a scheduling domain and not
directly to the runlist hardware; in the future, more than one domains
may exist and one of them is enabled at a time.
The domain is used only internally by the runlist code at this point and
is functionally equivalent to the current runlist memory that houses the
round robin entries.
The double buffering is still kept, although more domains might benefit
from some cleverness. Although any number of created domains may be
edited in runtime, nly one runlist memory is accessed by the hardware at
a time. To spare some contiguous memory, this should be considered an
opportunity for optimization in the future.
Jira NVGPU-6425
Change-Id: Id99c55f058ad56daa48b732240f05b3195debfb1
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2618386
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The implementation already exists. This change
adds NVGPU_GR_ZBC_TYPE_STENCIL and plumbs through
the stencil value from NvRmGpuDeviceZbcAddStencil
through NVGPU_GPU_IOCTL_ZBC_SET_TABLE.
Adds cases for querying the stencil values,
enabling NvRmGpuDeviceZbcGetStencilTableEntry.
Bug 3403523
Bug 3395601
Change-Id: I42c9a2967d0433e0bb08343aabeff0fe465f231e
Signed-off-by: Pyarelal Knowles <pknowles@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2554963
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add Setter and Getter methods for accessing tsg->sm_error_states.
Getter returns a constant pointer for struct nvgpu_tsg_sm_error_state.
This renders it unnecessary to add BVEC for above fields for the struct
in multiple locations. The current design ensures that only a constant
pointer is obtained from the owner unit i.e. FIFO.
The following new methods are added. Both unit tests and BVEC tests
are added for them as well.
nvgpu_tsg_store_sm_error_state
nvgpu_tsg_get_sm_error_state
Jira NVGPU-6947
Change-Id: I82c22a2774862c8579baa41b6fb8292fa164704a
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
(cherry picked from commit 79574638671a0c6efe41cd3423668fcd1bd96826)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2556938
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Shashank Singh <shashsingh@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
To enable userspace query about comptags allocation status of a buffer,
comptags are to be allocated only during buffer registration done by
nvrm_gpu. Earlier, they were allocated during map.
nvrm_gpu will be sending metadata blob to be associated with the buffer.
This will have to be stored in the dmabuf privdata for all the buffers
registered by nvrm_gpu.
This patch moves the privdata allocation to buffer registration ioctl.
Remove g->mm.priv_lock as it is not needed now. This lock was added
to protect dmabuf private data setup. That private data is now
handled through dmabuf->ops and setup of dmabuf->ops is done
under dmabuf->lock.
To support legacy userspace, this patch still allocates comptags on
demand on map calls for unregistered buffers.
Bug 200586313
Change-Id: I88b2ca04c733dd02a84bcbf05060bddc00147790
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2480761
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Existing implementation of GR de-init doesn't account for multiple
instances of struct nvgpu_gr. As a fix, below changes are added.
1) nvgpu_gr_free is unified for VGPU as well as native.
2) All the GR instances are freed.
3) Appropriate NULL checks are added when freeing GR memories.
4) 2D, 3D, I2M and ZBC etc are explicitely disabled when MIG is set.
5) In ioctl_ctrl, checks are added to not return error when zbc is NULL
for VGPU as requests are rerouted to RMserver.
Jira NVGPU-6920
Change-Id: Icaa40f88f523c2cdbfe3a4fd6a55681ea7a83d12
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2578500
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: Antony Clince Alex <aalex@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
At present, there is an inconsistency in the order in which
gpc_tpc masks are reported to the userspace. Both gpc and
tpc masks are reported using physical-ids. However, the
gpc_tpc_masks array is ordered by logical gpc-ids and
not physical-ids. This creates a mismatch between the gpc
reported as enabled in the gpc_mask and its corresponding
gpc_tpc_mask.
Introduce field "gpc_tpc_mask_physical" which stores the
gpc_tpc_masks in physical order and update
NVGPU_GPU_IOCTL_GET_TPC_MASKS to return this field.
Bug 200665942
Change-Id: I63aa83414a59676b7e7d36b6deb527e2f3c04cff
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2531114
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added below IVC commands to support VAB on HV.
* TEGRA_VGPU_CMD_FB_VAB_RESERVE - Enable & Configure VAB tracking
* TEGRA_VGPU_CMD_FB_VAB_FLUSH_STATE - Dump VAB to user buffer
* TEGRA_VGPU_CMD_FB_VAB_RELEASE - Disable VAB tracking
Also set HAL and enable VAB for ga10b vgpu.
Jira GVSCI-4619
Change-Id: Id7564611c24740ab8613e4baa420ee58fb52759a
Signed-off-by: Sagar Kadamati <skadamati@nvidia.com>
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2507268
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
On all chips except ga10b, the number of ROP, L2 units per FBP
were in sync, hence, their FS masks could be represented by a single
fuse register NV_FUSE_STATUS_OPT_ROP_L2_FBP. However, on ga10b, the ROP
unit was moved out from FBP to GPC and it no longer matches the number
of L2 units, so the previous fuse register was broken into two -
NV_FUSE_CTRL_OPT_LTC_FBP, NV_FUSE_CTRL_OPT_ROP_GPC.
At present, the driver reads the NV_FUSE_CTRL_OPT_ROP_GPC register
and reports incorrect L2 mask. Introduce HAL function
ga10b_fuse_status_opt_l2_fbp to fix this.
In addition, rename fields and functions to exclusively fetch L2 masks,
this should help accommadate ga10b and future chips in which L2 and ROP units
are not in same. As part of this, the following functions and
fields have been renamed.
- nvgpu_fbp_get_rop_l2_en_mask => nvgpu_fbp_get_l2_en_mask
- fuse.fuse_status_opt_rop_l2_fbp => fuse.fuse_status_opt_l2_fbp
- nvgpu_fbp.fbp_rop_l2_en_mask => nvgpu_fbp.fbp_l2_en_mask
The HAL ga10b_fuse_status_opt_rop_gpc is removed as rop mask is not
used anywhere in the driver nor exposed to userspace.
Bug 200737717
Bug 200747149
Change-Id: If40fe7ecd1f47c23f7683369a60d8dd686590ca4
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551998
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) Expose logical mask instead of physical mask when MIG is enabled.
For legacy, NvGpu expose physical mask.
2) Added fb related info in struct nvgpu_gpu_instance().
4) Added utility api to get the logical id for a given local id
nvgpu_grmgr_get_gr_gpc_logical_id()
5) Added grmgr api to get max_gpc_count
nvgpu_grmgr_get_max_gpc_count().
5) Added grmgr's fbp api to get num_fbps and its enable masks.
nvgpu_grmgr_get_num_fbps()
nvgpu_grmgr_get_fbp_en_mask()
nvgpu_grmgr_get_fbp_rop_l2_en_mask()
6) Used grmgr's fbp apis in ioctl_ctrl.c
7) Moved fbp_init_support() in nvgpu_early_init()
8) Added nvgpu_assert handling in grmgr.c
9) Added vgpu hal for get_max_gpc_count().
JIRA NVGPU-5656
Change-Id: I90ac2ad99be608001e7d5d754f6242ad26c70cdb
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2538508
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
HAL .exec_regops used to first validate regops then execute it, now
moving it to only execute the regops.
- It helps B0CC on HV. On server side it does not track profiler object,
but regops validation uses the profiler, so moving validation to client
side.
- The change also remove ctx_buffer_offset checking in
validate_reg_op_offset. The offset already checked again whitelists
which have be verified when update whitelist. Also vgpu does not have
information of ctx and golden image.
- Added function nvgpu_regops_exec to cover both regops validation and
execution.
Jira GVSCI-10351
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Change-Id: I434e027290e263a8a64a25a55500f7294038c9c4
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2534252
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update the nvgpu_runlist_update_for_channel() function:
- Rename it to nvgpu_runlist_update()
- Have it take a pointer to the runlist to update instead
of a runlist ID. For the most part this makes the code
better but there's a few places where it's worse (for
now).
This starts the slow and painful process of moving away from
the non-runlist code using runlist IDs in many places it should
not.
Most of this patch is just fixing compilation problems with
the minor header updates.
JIRA NVGPU-6425
Change-Id: Id9885fe655d1d750625a1c8aceda9e67a2cbdb7a
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2470304
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Rename struct nvgpu_runlist_info to struct nvgpu_runlist; the
info is not necessary. struct nvgpu_runlist is soon to be a
first class object among the nvgpu object model.
Also rename the fields runlist_info and active_runlist_info to
simply runlists and active_runlists respectively. Again the info
text is just not necessary and somewhat misleading. These structs
_are_ the runlist representations in SW; they are not merely
informational.
Also add an rl_dbg() macro to print debug info specific to
runlist management and some debug prints specifying the runlist
topology for the running chip.
Change-Id: Id9fcbdd1a7227cb5f8c75cca4abbff94fe048e49
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2470303
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add gv11b and tu104 HALs to get allowed HWPM resource register ranges,
offsets, and stride meta data.
Add new enum nvgpu_pm_resource_hwpm_register_type for HWPM register
type. Add new struct nvgpu_pm_resource_register_range_map to store all
the register ranges for HWPM resources. Add pointer of map in struct
nvgpu_profiler_object along with map entry count.
Add new API nvgpu_profiler_build_regops_allowlist() to build the regops
allowlist dynamically while binding the resources. Map entry count is
received with get_pm_resource_register_range_map_entry_count() and only
those resource ranges are added for which resource is reserved by
profiler object.
Add nvgpu_profiler_destroy_regops_allowlist() to destroy the allowlist
while unbinding the resources.
Add static functions allowlist_range_search() to search a register
offset in HWPM resource ranges. Add another static function
allowlist_offset_search() to search the offset in per-resource offset
list.
Add nvgpu_profiler_validate_regops_allowlist() that accepts an offset
value, checks if it is in allowed ranges using allowlist_range_search()
and then checks if offset is in allowlist using allowlist_offset_search().
Update gops.regops.exec_regops() to receive profiler object pointer as
a parameter.
Invoke nvgpu_profiler_validate_regops_allowlist() from
validate_reg_ops() if prof pointer is not-null. This will be true only
for new profiler stack and not legacy profilers.
In gr_exec_ctx_ops(), skip regops execution if offset is invalid.
Bug 2510974
Jira NVGPU-5360
Change-Id: I40acb91cc37508629c83106ea15b062250bba473
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2460001
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
By always mapping gmmu kernel page using 4kB page, it'll be consistent
with native nvgpu driver. It's a workaround for enabling 64KB os kernel
page support.
In long term solution, GMMU_PAGE_SIZE_KERNEL will be os kernel page
size, and function nvgpu_gmmu_update_page_table will choose big page or
small page by comparing the size of GMMU_PAGE_SIZE_KERNEL with the size
of small or big pages. Regardingly vgpu will choose kernel page size by
comparing the size too when send map commands to server.
Bug 3015296
Bug 3015296
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Change-Id: I5d25280a9410da3ef628e5914ea962a76b102273
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2437193
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
The simulator ring buffer DMA interface supports buffers of the following sizes:
4, 8, 12 and 16K. At present, it is configured to 4K and it happens to match
with the kernel PAGE_SIZE, which is used to wrap back the GET/PUT pointers once
4K is reached. However, this is not always true; for instance, take 64K pages.
Hence, replace PAGE_SIZE with SIM_BFR_SIZE.
Introduce macro NVGPU_CPU_PAGE_SIZE which aliases to PAGE_SIZE and replace
latter with former.
Bug 200658101
Jira NVGPU-6018
Change-Id: I83cc62b87291734015c51f3e5a98173549e065de
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2420728
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.gr unit exports a separate API nvgpu_gr_prepare_sw to
initialize some SW pieces required for nvgpu_gr_enable_hw().
A separate API is really unnecessary since same initialization
can be performed in nvgpu_gr_alloc().
Remove nvgpu_gr_prepare_sw() and HAL gops.gr.gr_prepare_sw().
Initialize falcon and interrupt structures in loop from
nvgpu_gr_alloc().
Move nvgpu_netlist_init_ctx_vars() from nvgpu_gr_prepare_sw() to
common init path since netlist parsing need not be done from
common.gr unit. It just needs to happen before nvgpu_gr_enable_hw().
Also, trigger nvgpu_gr_free() from gr_remove_support() instead
of OS specific paths. Also remove nvgpu_gr_free() calls from
probe error paths since nvgpu_gr_alloc is no longer called in
probe path.
Move interrupt and falcon data structure free calls to nvgpu_gr_free().
Also remove corresponding unit testing code that tests
nvgpu_gr_prepare_sw() specifically.
Update some unit tests to initialize ecc counters and netlist.
Disable some unit tests that fail for reasons unknown.
Jira NVGPU-5648
Change-Id: I82ec8160f76530bc40e0c11a9f26ba1c8f9cf643
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2400166
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
