nvgpu_device_get can return NULL if supplied invalid ID or instance
ID. We expect GR device struct to be non-NULL there hence just
assert that it is indeed non-NULL in gr_reset_engine and
ga10b_grmgr_init_gr_manager.
CID 224133
CID 250232
Bug 3512546
Change-Id: Id09a1c436a8e49b921111b940d3d013bd66bff7a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2707018
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The timestamp control register in the SMCARB should be configured to have
the NV_PSMCARB_TIMESTAMP_CTRL_DISABLE_TICK field cleared, otherwise the PTIMER
ticks will not be sent to GR engine. Hence, remove the pre-processor checks
around grmgr.load_timestamp_prod call.
Bug 3510460
Bug 3500065
Change-Id: I223cea1aca28a9215287f540eb961a16e3fe6626
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2671021
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following changes are added
1) nvgpu_gr_config->gpc_tpc_mask_physical is now indexed by physical
gpc id instead of logical id.
2) Removed the conversion of logical fbp ids and replace them with
physical ids.
3) nvgpu_gpu_instance->fbp_en_mask now contains the mask of physical fbp ids.
4) gk20a_ctrl_ioctl_gpu_characteristics returns gpu.gpc_mask returns mask
of physical ids.
Bug 200712091
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: I0e066df76e07203ff4a5be5bfff2cef8566b425d
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2648831
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add support for powering off IGPU for switching between
legacy to SMC mode/vice-versa or changing SMC configuration.
The power off can be issued as follows
echo 0 > /dev/nvgpu/igpu0/power
The following steps are done during a poweroff.
1) Deterministic channel idle
2) Acquire write_lock on l->busy semaphore.
3) Wait till power_usage decrements to indicate 0 active jobs.
4) Invoke pm_runtime_put_sync_suspend()
5) Invoke nvgpu_gr_remove_support() to clear existing GR memory.
6) Release write_lock on l->busy
7) Deterministic channel unidle.
Part of the sequence matches that of the gk20a_do_idle code.
The common parts are extracted into new functions
gk20a_block_new_jobs_and_idle() and gk20a_unblock_jobs()
For joint-rail case, the current implementation, does a railgate
and then sets pm_runtime_set_autosuspend_delay(-1) to disable
regular runtime resume/suspend.
Remove clearing of NVGPU_SUPPORT_MIG status during state change
ias it leads to inconsistencies.
Jira NVGPU-6920
Change-Id: I0b3eb3278176122ac061c1e8a94ebfb3c17c3925
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2578501
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: Antony Clince Alex <aalex@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
On all chips except ga10b, the number of ROP, L2 units per FBP
were in sync, hence, their FS masks could be represented by a single
fuse register NV_FUSE_STATUS_OPT_ROP_L2_FBP. However, on ga10b, the ROP
unit was moved out from FBP to GPC and it no longer matches the number
of L2 units, so the previous fuse register was broken into two -
NV_FUSE_CTRL_OPT_LTC_FBP, NV_FUSE_CTRL_OPT_ROP_GPC.
At present, the driver reads the NV_FUSE_CTRL_OPT_ROP_GPC register
and reports incorrect L2 mask. Introduce HAL function
ga10b_fuse_status_opt_l2_fbp to fix this.
In addition, rename fields and functions to exclusively fetch L2 masks,
this should help accommadate ga10b and future chips in which L2 and ROP units
are not in same. As part of this, the following functions and
fields have been renamed.
- nvgpu_fbp_get_rop_l2_en_mask => nvgpu_fbp_get_l2_en_mask
- fuse.fuse_status_opt_rop_l2_fbp => fuse.fuse_status_opt_l2_fbp
- nvgpu_fbp.fbp_rop_l2_en_mask => nvgpu_fbp.fbp_l2_en_mask
The HAL ga10b_fuse_status_opt_rop_gpc is removed as rop mask is not
used anywhere in the driver nor exposed to userspace.
Bug 200737717
Bug 200747149
Change-Id: If40fe7ecd1f47c23f7683369a60d8dd686590ca4
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551998
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This CL covers the following modifications,
1) Added logic to skip the graphics unit specific sw context load
register write during context creation when MIG is enabled.
2) Added logic to skip the graphics unit specific sw method
register write when MIG is enabled.
3) Added logic to skip the graphics unit specific slcg and blcg gr
register write when MIG is enabled.
4) Fixed some priv errors observed during MIG boot.
5) Added MIG Physical support for GPU count < 1.
6) Host clk register access is not allowed for GA100.
So skipped to access host clk register.
7) Added utiliy api - nvgpu_gr_exec_with_ret_for_all_instances()
8) Added gr_pri_mme_shadow_ram_index_nvclass_v() reg field
to identify the sw method class number.
Bug 200649233
Change-Id: Ie434226f007ee5df75a506fedeeb10c3d6e227a3
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2549811
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Replace all nvgpu_next functions/structs either by 1) collapsing them
into nvgpu legacy functions/structs 2) renaming them as follows:
- nvgpu_next_*() => nvgpu_(ga10b/ga100)_*()
- nvgpu_next_*() => (ga10b/ga100)_*()
- nvgpu_next_*() => nvgpu_*() [only if this doesn't cause collision]
- nvgpu_next_*() = > nvgpu_*_extra()
Create hal.sim unit and move Ampere+ SIM code into it.
Jira NVGPU-4771
Change-Id: I215594a0d0df4bd663bd875a0d0db47bcb9ff6a2
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2548056
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
