Nvgpu does not support nested interrupts and as a result priv/pbus
interrupt do not reach cpu while other interrupts on intr_0 (stall)
tree are being processed. This issue is not specific to priv/pbus
but since pbus errors are critical, it is important to detect it
early on.
Below is the snippet from one of the failing logs where nvgpu
is doing recovery to process gr interrupt.
Right after GR engine is reset (PGRAPH of PMC_ENABLE), failing priv
accesses should have triggered pbus interrupt but it does not reach cpu
until gr interrupt is handled. Any interrupt that requires recovery will
take longer to finish isr as recovery is done as part of isr.
Also intr_0 (stall) interrupts are paused while stall interrupt is being
processed.
gm20b_gr_falcon_bind_instblk:147 [ERR] arbiter idle timeout, status: badf1020
gm20b_gr_falcon_wait_for_fecs_arb_idle:125 [ERR] arbiter idle timeout, fecs ctxsw status: 0xbadf1020
Fix to detect pbus intr while other stall interrupts are being processed
is to move pbus intr enable/disable/clear/handle to nonstall (intr_1)
tree. Configure pbus_intr_en_1 to route pbus to nostall tree.
Priv interrupts cannot be moved to nonstall (intr_1) tree due
to h/w not supporting this.
In Turing, moving pbus intr to nonstall is not feasible as mc_intr(1)
tree is deprecated. Add Turing specific stall intr handler hals with
original logic to route pbus intr to mc_intr(0).
JIRA NVGPU-25
Bug 200603566
Change-Id: I36fc376800802f20a0ea581b4f787bcc6c73ec7e
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2354192
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Changes added to support "rmmod nvgpu" in dgpu simulation after gpu
poweron.
nvgpu_engine-wait_for_idle got stuck in busy mode for nvdec and nvec
engines in simulation as simulation doesnt support timeout.
These engines are not valid engines in nvgpu engine list.
Add nvgpu_engine_check_valid_id before checking engine status.
Simulation crash on accessing 0xb81604 top interrupt register.
Add func_priv_cpu_intr_top__size_1_v() function to get the supported
size than using default MAX_INTR_TOP_REGS.
nvlink is not supprted in dgpu simulation. Avoid warning for
-ENODEV return.
Avoid register read following gpu power off completion.
Bug 2498574
Change-Id: I9f9f1cf1ac4620242bda1d2cc0f29f51f81a6711
Signed-off-by: vinodg <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2179930
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move chip specific mc code from common/mc to hal/mc.
Replace gk20a_readl/writel with nvgpu_readl/writel
Replace 0xFFFFFFFFU with U32_MAX hash define
Change local variable names to fix checkpatch errors/warnings
Change BUG to WARN
Move defines to header files
Create new defines for hard coded delays
JIRA NVGPU-2041
Change-Id: I3594121a81da37ef58c47e87c45e96441e4cf8c7
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2085268
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
