nvgpu_timeout_init() returns an error code only when the flags parameter
is invalid. There are very few possible values for flags, so extract the
two most common cases - cpu clock based and a retry based timeout - to
functions that cannot fail and thus return nothing. Adjust all callers
to use those, simplfying error handling quite a bit.
Change-Id: I985fe7fa988ebbae25601d15cf57fd48eda0c677
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2613833
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reduce debug logs printed when gpu_dbg_info or gpu_dbg_fn is set.
- Add gpu_dbg_verbose flag for more verbose debug prints. Update prints
in to ga10b_gr_init_wait_idle(), gm20b_gr_init_wait_fe_idle(),
gv11b_gr_init_write_bundle_veid_state() and
gv11b_gr_init_load_sw_veid_bundle().
- Add gpu_dbg_hwpm flag for hwpm specific debug prints. Update print in
nvgpu_gr_hwpm_map_create().
- Add gpu_dbg_mm for MM specific debug prints. Update prints in
gm20b_fb_tlb_invalidate(), gk20a_mm_fb_flush(),
gk20a_mm_l2_invalidate_locked(), gk20a_mm_l2_flush() and
gv11b_mm_l2_flush().
- Remove gpu_dbg_fn mask print in gr_ga10b_create_priv_addr_table(),
gr_gk20a_get_pm_ctx_buffer_offsets(), gr_gv11b_decode_priv_addr() and
gr_gv11b_create_priv_addr_table().
Jira NVGPU-7183
Change-Id: I9842d567047cb95a42e23b5907ae324214eed606
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2602797
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The function gk20a_mm_l2_flush incorrectly returns an error value
when it skips l2_flush when hardware is powered off.
This causes the following prints to occur even when the behavior is expected.
gv11b_mm_l2_flush:43 [ERR] gk20a_mm_l2_flush failed
nvgpu_gmmu_unmap_locked:1043 [ERR] gk20a_mm_l2_flush[1] failed
The above errors occur from the following paths
1) gk20a_remove -> gk20a_free_cb -> gk20a_remove_support ->
nvgpu_pmu_remove_support -> nvgpu_pmu_pg_deinit ->
nvgpu_dma_unmap_free
2) gk20a_remove -> gk20a_free_cb -> gk20a_remove_support ->
nvgpu_remove_mm_support -> gv11b_mm_mmu_fault_info_mem_destroy ->
nvgpu_dma_unmap_free
Since, these do not belong in the Poweron/Poweroff path, its okay to
skip flushing them when the hardware has powered off.
Fixed the userspace tests by allocating g->mm.bar1.vm to prevent NULL access
in gv11b_mm_l2_flush->tlb_invalidate.
Jira LS-77
Change-Id: I3ca71f5118daf4b2eeacfe5bf83d94317f29d446
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2523751
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
- "include/trace/events/gk20a.h" file was having GPL2 license
(which should not used for QNX code). This file was used for
compiling linux userspace driver("libnvgpu-drv.so") and was used for
unit testing on QNX.
- This patch removes stubs in "include/trace/events/gk20a.h" file.
(which were used for linux userspace driver.)
- For QNX driver, "nvgpu_rmos/trace/events/gk20a.h" was used.
This patch moves that file to "include/nvgpu/posix/trace_gk20a.h" and
does relevant license change. This same file will be used for linux
userspace driver.
- This patch also creates a new file "include/nvgpu/trace.h" which
selects proper trace file depending on the config.
Bug 2802414
Change-Id: Icdfb251e5698073f986753a969e804161af3ecc5
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2286388
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
IRQs can get triggered during nvgpu power-on due to MMU fault, invalid
PRIV ring or bus access etc. Handlers for those IRQs can't access the
full state related to the IRQ unless nvgpu is fully powered on.
In order to let the IRQ handlers know about the nvgpu power-on state
gk20a.power_on_state variable has to be protected through spinlock
to avoid the deadlock due to usage of earlier power_lock mutex.
Further the IRQs need to be disabled on local CPU while updating the
power state variable hence use spin_lock_irqsave and spin_unlock_-
irqrestore APIs for protecting the access.
JIRA NVGPU-1592
Change-Id: If5d1b5e2617ad90a68faa56ff47f62bb3f0b232b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2203860
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Multiple non-safe functions under NVGPU_DEBUGGER, NVGPU_CILP and other
config flags were moved to fusa files. Although they are guarded by
the C flags, it makes sense to keep those functions in non-fusa
files. Make this change for all hals.
JIRA NVGPU-3853
Change-Id: I8151b55a60cb50c5058af48bab9e8068f929ac3b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2204352
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This change switches nvgpu_timeout_peek_expired() to return a bool
instead of an int to remove advisory rule MISRA 10.5 violations.
MISRA 10.5 states that the value of an expression should not be
cast to an inappropriate essential type.
JIRA NVGPU-3798
Change-Id: I5cf9badaf07493e11a639e47ae4cf221700134ff
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2155617
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch moves MM HALs that are guaranteed to be functionaly safe
into _fusa.c files. HALs that are not part of FUSA are not compiled
anymore when the safety profile is enabled.
Given a HAL source file:
- it may contain only FUSA code, in that case the source file is
simply renamed with the _fusa postfix.
- it may contain only non-FUSA code, in that case the file is left
as-is
- it may contain a mix, in that case the original file will now only
contain non-FUSA code, and all FUSA code will be moved into a new
source file with the _fusa postfix.
JIRA NVGPU-3690
Change-Id: I44c604aef2d72252abb7da1c0ef1210d71a0efa7
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2140895
GVS: Gerrit_Virtual_Submit
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below MISRA 17.7 violations are reported in nvgpu.hal.mm.mm,
for nvgpu_timeout_init functions:
misra_c_2012_rule_17_7: The return value of a non-void function
"nvgpu_timeout_init" is unused.
Fix this by asserting that nvgpu_timeout_init is successful, since
it should never fail with NVGPU_TIMER_RETRY_TIMER flag.
Jira NVGPU-3283
Change-Id: I89a6afa5d024683a50dfa5dc277da7fe4a6478bb
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2119606
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a new MM HAL directory to contain all MM related HAL units.
As part of this change add cache unit to the MM HAL. This contains
several related fixes:
1. Move the cache code in gk20a/mm_gk20a.c and gv11b/mm_gv11b.c to
the new cache HAL. Update makefiles and header includes to take
this into account. Also rename gk20a_{read,write}l() to their
nvgpu_ variants.
2. Update the MM gops: move the cache related functions to the new
cache HAL and update all calls to this HAL to reflect the new
name.
3. Update some direct calls to gk20a MM cache ops to pass through
the HAL instead.
4. Update the unit tests for various MM related things to use the
new MM HAL locations.
This change accomplishes two architecture design goals. Firstly it
removes a multiple HW include from mm_gk20a.c (the flush HW header).
Secondly it moves code from the gk20a/ and gv11b/ directories into
more proper locations under hal/.
JIRA NVGPU-2042
Change-Id: I91e4bdca4341be4dbb46fabd72622b917769f4a6
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2095749
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
