Add below new macros to execute given function on given gr instance
in SMC mode. If SMC mode is not enabled or supported, function is
executed as is.
1) nvgpu_gr_exec_for_instance
Execute a function for given GR instance by configuring GR remap
window for that instance. Function being executed returns void.
2) nvgpu_gr_exec_with_ret_for_instance
Execute a function for given GR instance by configuring GR remap
window for that instance. Function being executed returns an error.
Jira NVGPU-5648
Change-Id: I3f051bcfdac297b7e5216da9eeee06a46878e7b8
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2405407
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add a new header file <nvgpu/gr/gr_instances.h> that supports below
macros to execute various functions for GR instances
1) nvgpu_gr_exec_for_each_instance
Execute a function for each GR instance by configuring GR remap
window for that instance. Function being executed returns void.
2) nvgpu_gr_exec_with_ret_for_each_instance
Execute a function for each GR instance by configuring GR remap
window for that instance. Function being executed returns an error.
3) nvgpu_gr_exec_for_all_instances
Execute a function for all GR instances at once. For this GR remap
window needs to be disabled temporarily.
If CONFIG_NVGPU_MIG is disabled, all above macros will turn into simple
funciton calls.
If CONFIG_NVGPU_MIG is disabled or if runtime flag NVGPU_SUPPORT_MIG is
disabled, all above macros will turn into simple function calls that
configure single GR instance.
Separate out GR engine reset code into new API gr_reset_engine() and
execute it with nvgpu_gr_exec_with_ret_for_each_instance().
PROD values need to be loaded in legacy mode, hence call
nvgpu_cg_init_gr_load_gating_prod() inside
nvgpu_gr_exec_for_all_instances().
Rename gr_init_prepare_hw() to more appropriate
gr_reset_hw_and_load_prod()
Moe gops.gr.init.fifo_access() call to gr_init_reset_enable_hw().
Add new API nvgpu_grmgr_get_gr_syspipe_id() to query GR instance syspipe
id from common.grmgr unit. Add nvgpu_gr_get_syspipe_id() that returns
same value stored in nvgpu_gr struct.
Add cur_gr_instance field to struct nvgpu_gr to track current GR
instance being programmed under remap window.
Jira NVGPU-5648
Change-Id: I86920303427a6e6547ebf195daa37438365bb38e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2403550
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following changes are made in this patch.
1) Change unnamed structs within gpu_ops to named structs
with the prefix gops_*.
2) Each named struct gops_ are moved into a separate gops specific file
under include/nvgpu/gops/
3) struct gpu_ops is moved into a separate file include/nvgpu/gpu_ops.h
and all other dependent struct gops_* are included in this header.
4) Direct references to include/nvgpu/gops are removed from files as its enough
to include gk20a.h.
Change-Id: Ieb22cb853be567e3bef14f5f8a04674eebd902ea
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2398776
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
* Removed unnecessary irqs_enabled flag, and
Replaced enable/disable irq logics with nvgpu variant functions.
* Added nvgpu_interrupts data structure to hold interrupt details.
* Interpret all stall irqs first and followed by nonstall irq from dt.
* Used interrupt size checks for enable/disable irqs instead of
comparing stall and nonstall interrupt lines.
Now adding new stall interrupt lines as easy as just updating macro.
Jira NVGPU-6019
Change-Id: I5a5eaa8d333c68ee87d25d2b45ec244ec8d7b297
Signed-off-by: Sagar Kadamati <skadamati@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2400777
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The copyengine code to do big transfers or memsets supports a 64-bit
size. Each copy is done as a rectangle with either side being at most
2GB, so a size that does not align nicely is split into multiple ops. It
turns out that there are at most two of these ops, so structure the code
to not loop but do two ops explicitly.
The first copyengine operation works with the first chunk that is less
than two gigabytes long. That leaves the remaining size to be a multiple
of two gigabytes, so it's sufficient to do just another operation as a
2D rectangle whose width is two gigabytes; the remaining size determines
the height, i.e. the number of two-gig lines.
The loop did just this already, but now with at most two operations per
submit the required pushbuf length is seen more easily from the code.
Jira NVGPU-5172
Change-Id: I6bca3b1204db3b79e131898c07018a1337d85774
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2402028
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The max values that the Linux nvhost driver tracks are adding some
complexity to our wrapper APIs. Max values are used only for internal
submit syncpoint tracking, so implement that tracking in the sync code
by just storing the last value that the syncpoing will reach after all
jobs are complete.
The value is a simple u32. It's accessed from functions in the submit
path that already is serialized, so there's no worrying about atomic
modifications.
Previously nvhost_syncpt_set_min_eq_max_ext() was used to reset the
syncpoint when necessary. Now with the internal max value we'll use
nvhost_syncpt_set_minval(), so add a wrapper for it.
The maxval reported with the user syncpoint allocation is just the
current value at allocation time since no jobs have affected it yet;
there is no means for the kernel to track the max value of user
syncpoints.
Jira NVGPU-5506
Change-Id: I34672eaa7fe3af36b2fbac92d11babe2bc6a2d2b
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2400635
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The joblist cleanup lock exists to synchronize the submit job cleanup
and the abort cleanup that may run in separate threads concurrently.
This concurrency is no problem anymore, so delete the lock.
The lock was added in commit f1072a28be ("gpu: nvgpu: add worker for
watchdog and job cleanup") when the abort cleanup still went through
each job in the pending list and released their semaphores; ordinary job
cleanup from the worker thread also accesses the jobs. Commit d20a501dcb
("gpu: nvgpu: simplify job semaphore release in abort") deleted the
entire loop because the semaphore, if any, is now reset in one go (via
the "set_min_eq_max" ch sync op), but the lock stayed.
With aggressive sync destroy enabled the sync object under the cleanup
lock can still disappear if the job cleanup runs, but that's already
guarded with the sync lock.
Jira NVGPU-5998
Change-Id: I6554eb2065b003c6fdf83f66f97067b59aa272f5
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2401467
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.gr unit exports a separate API nvgpu_gr_prepare_sw to
initialize some SW pieces required for nvgpu_gr_enable_hw().
A separate API is really unnecessary since same initialization
can be performed in nvgpu_gr_alloc().
Remove nvgpu_gr_prepare_sw() and HAL gops.gr.gr_prepare_sw().
Initialize falcon and interrupt structures in loop from
nvgpu_gr_alloc().
Move nvgpu_netlist_init_ctx_vars() from nvgpu_gr_prepare_sw() to
common init path since netlist parsing need not be done from
common.gr unit. It just needs to happen before nvgpu_gr_enable_hw().
Also, trigger nvgpu_gr_free() from gr_remove_support() instead
of OS specific paths. Also remove nvgpu_gr_free() calls from
probe error paths since nvgpu_gr_alloc is no longer called in
probe path.
Move interrupt and falcon data structure free calls to nvgpu_gr_free().
Also remove corresponding unit testing code that tests
nvgpu_gr_prepare_sw() specifically.
Update some unit tests to initialize ecc counters and netlist.
Disable some unit tests that fail for reasons unknown.
Jira NVGPU-5648
Change-Id: I82ec8160f76530bc40e0c11a9f26ba1c8f9cf643
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2400166
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new API nvgpu_grmgr_get_num_gr_instances() that returns number of
GR instance enumerated by GR manager. This just returns number of sys
pipes enabled since it is same as number of GR instances.
For consistency until common.gr supports multiple GR instances
completely, add a temporary macro NVGPU_GR_NUM_INSTANCES and set it
to 1. If this macro is changed to 0 (for local MIG testing), fall
back to use nvgpu_grmgr_get_num_gr_instances() to get enumerated number
of GR instances.
Use a for loop to initialize other variables of struct nvgpu_gr.
Remove unnecessary NULL check in nvgpu_gr_alloc() since struct gk20a
pointer can never be NULL in this path. Also remove corresponding unit
test code.
Jira NVGPU-5648
Change-Id: Id151d634a23235381229044f2a9af89e390886f2
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2400151
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The channel code needs the watchdog code and vice versa. Cut this
circular dependency with a few simplifications so that the watchdog
wouldn't depend on so much.
When calling watchdog APIs that cause stores or comparisons of channel
progress, provide a snapshot of the current progress instead of a whole
channel pointer. struct nvgpu_channel_wdt_state is added as an interface
for this to track gp_get and pb_get.
When periodically checking the watchdog state, make the channel code ask
whether a hang has been detected and abort the channel from within
channel code instead of asking the watchdog to abort the channel. The
debug dump verbosity flag is also moved back to the channel data.
Move the functionality to restart all channels' watchdogs to channel
code from watchdog code. Looping over active channels is not a good
feature for the watchdog; it's better for the channel handling to just
use the watchdog as a tracking tool.
Move a few unserviceable checks up in the stack to the callers of the
wdt code. They're a kludge but this will do for now and demonstrates
what needs to be eventually fixed.
This does not leave much code in the watchdog unit. Now the purpose of
the watchdog is to only isolate the logic to couple a timer and progress
snapshots with careful locking to start and stop the tracking.
Jira NVGPU-5582
Change-Id: I7c728542ff30d88b1414500210be3fbaf61e6e8a
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2369820
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Legacy profiler does not reserve PMA stream resource with PM
reservation system. Also, HWPM system reset is separately implemented
in membuf disable path. And it does not even restore perf unit SLCG
prod values.
Allcoate a dummy profiler object for debug session in perfbuf map
path. Free it in perfbuf unmap path.
This has advantage of synchronizing PMA stream reservation with new
profiler stack. And this also leverages HWPM system reset and SLCG
handling code during resource reservation.
Remove explicit HWPM reset from gops.perf.membuf_reset_streaming()
HALs
Bug 2510974
Jira NVGPU-5360
Change-Id: I54c5202b6251dea3d80a4dfc011e8a296339e07f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2399595
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Hardware HWPM system should be reset when first reservation is made
either for HWPM or PMA_STREAM resource. Support this with below changes
- Add hwpm_refcount counter to track HWPM and PMA_STREAM resource
reservation count
- Increment counter on every HWPM/PMA resource reservation
- Decrement counter on every resource reservation release
- Reset HWPM system in MC and disable perf unit SLCG on first refcount
increment
- Reset HWPM system in MC and re-enable perf unit SLCG after last
refcount decrement
- Add nvgpu_cg_slcg_perf_load_enable() to manage perf unit SLCG
Bug 2510974
Jira NVGPU-5360
Change-Id: I20d2927947c3e4d8073cd3131b7733791e9c9346
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2399594
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
When a pbdma fault needs a channel teardown, do the recovery/teardown
process before acking the pbdma interrupt status back. Acking it causes
the hardware to proceed which could release fences too early before the
involved channel(s) have been found to be broken.
With these host copyengine interrupts, the teardown sequence is light
and proceeds even with the pbdma intr flag still set; there are no
engines to reset when these pbdma launch check interrupts happen. The
bad tsg is just disabled and the channels in it aborted.
A few unit tests are so heavily affected by this refactor that they
would need to be rewritten. They're not strictly needed at the moment,
so do only half of the rewrite: just delete them.
Bug 200611198
Change-Id: Id126fb158b6d05e46ba124cd426389046eedc053
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2392669
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Delete the struct nvgpu_engine_info as it's essentially identical to
struct nvgpu_device. Duplicating data structures is not ideal as it's
terribly confusing what does what.
Update all uses of nvgpu_engine_info to use struct nvgpu_device. This
is often a fairly straight forward replacement. Couple of places though
where things got interesting:
- The enum_type that engine_info uses is defined in engines.h and
has a bit of SW abstraction - in particular the GRCE type. The only
place this seemed to be actually relevant (the IOCTL providing device
info to userspace) the GRCE engines can be worked out by comparing
runlist ID.
- Addition of masks based on intr_id and reset_id; those can be
computed easily enough using BIT32() but this is an area that
could be improved on.
This reaches into a lot of extraneous code that traverses the fifo
active engines list and dramtically simplifies this. Now, instead of
having to go through a table of engine IDs that point to the list of
all host engines, the active engine list is just a list of pointers to
valid engines. It's now trivial to do a for-all-active-engines type
loop. This could even be turned into a generic macro or otherwise
abstracted in the future.
JIRA NVGPU-5421
Change-Id: I3a810deb55a7dd8c09836fd2dae85d3e28eb23cf
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2319895
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GPU enabled_flags indicate features supported by nvgpu.
Add nvgpu_print_enabled() to print GPU enabled_flags. Print flag value
after poweron complete to help during debug.
Add verbose function to print flag name and status if gpu_dbg_info is
set.
JIRA NVGPU-5838
Change-Id: I3b0ddb8c6872f4f3b6101050da087ff553c16f84
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2383531
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- use release instead of free for the fence destroy identifier
- nvhost_dev is a struct name, so use nvhost_device
- compare nvgpu_nvhost_syncpt_read_ext_check retval properly
Also, if the syncpt read fails when checking for fence expiration,
behave as if the wait isn't expired. Possibly getting stuck is safer
than possibly continuing too early.
Jira NVGPU-5617
Change-Id: Ied529e25f8c43f1c78fd9eac73b9cd6c3550ead5
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2398399
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
struct nvgpu_gr is right now initialized during probe and from OS
specific code. To support multiple instances of graphics engine,
nvgpu needs to initialize nvgpu_gr after number of engine instances
have been enumerated in poweron path.
Hence move nvgpu_gr_alloc() to poweron path and after gr manager has
been initialized.
Some of the members of nvgpu_gr are initialized in probe path and they
too are in OS specific code. Move them to common code in
nvgpu_gr_alloc()
Add field fecs_feature_override_ecc_val to struct gk20a to store the
override flag read from device tree. This flag is later copied to
nvgpu_gr in poweron path.
Update tpc_pg_mask_store() to check for g->gr being NULL before
accessing golden image pointer.
Update tpc_fs_mask_store() to return error if g->gr is not initialized.
This path needs nvgpu_gr struct initialized. Also fix the incorrect
NULL pointer check in tpc_fs_mask_store() which breaks the write path
to this sysfs.
Jira NVGPU-5648
Change-Id: Ifa2f66f3663dc2f7c8891cb03b25e997e148ab06
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2397259
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Created Perfmon events handling for nvgpu-next.
Nvgpu-next pmu send perfmon events in the form of
rpc events. Events are:
- Change event: This gives information of whether
it is increase/decrease event.
- Init event: This gives information of perfmon init
done in PMU.
NVGPU-5202
NVGPU-5205
NVGPU-5206
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Change-Id: Ida7e77dbaf70d2b594a0801c91a168dcb4a860bd
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2395358
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
channel_joblist_peek() returns NULL if the list is empty.
nvgpu_channel_joblist_is_empty() has been used only together with that
function; remove it and check against NULL to see whether there are jobs
in flight.
This removes some duplication, simplifies the call sites slightly, and
gets rid of a Coverity nag about a possible NULL pointer from peek that
really isn't (when the emptiness was already checked).
Jira NVGPU-5772
Change-Id: I814e9c510d99b88e59539359992fb44d4e7ce2ea
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2397394
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a "priv" fence struct type and use that in the fence type to
emphasize that the inner data is not meant to be seen.
The fence unit needs to have an outside-visible fence type so that
fences can be allocated directly as a struct field in job metadata for
performance and simplicity, so hiding the type entirely wouldn't work.
A couple of places need to touch the priv data directly in channel code.
Those can be thought to be technically fence unit's code scattered
outside the fence files, but they mean that the architecture is not
perfect yet.
Jira NVGPU-5773
Change-Id: Ifa3c95757ae31eef0e32f2605293e23e210b065f
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2395071
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split up nvgpu_channel_clean_up_jobs() on the clean_all parameter so
that there's one version for the asynchronous ("deferred") cleanup and
another for the synchronous deterministic cleanup that occurs in the
submit path.
Forking another version like this adds some repetition, but this lets us
look at both versions clearly in order to come up with a coherent plan.
For example, it might be feasible to have the light cleanup of pooled
items in also the nondeterministic path, and deferring heavy cleanup to
another, entirely separated job queue.
Jira NVGPU-5493
Change-Id: I5423fd474e5b8f7b273383f12302126f47076bd3
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2346065
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the sema-specific APIs to the sema-specific os fence header. Do the
same for syncpts. Stub out the os fence type and the initialized check
if os fence support is not enabled in build time. Guard the sema header
with CONFIG_NVGPU_SW_SEMAPHORE.
Jira NVGPU-5773
Change-Id: I838debd66a800b00cde76e65458b13eee367b55f
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2395070
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new APIs to bind/unbind PM resources to/from profiler objects:
nvgpu_profiler_bind_pm_resources()
nvgpu_profiler_unbind_pm_resources()
Implement support to bind/unbind SMPC/HWPM/HWPM_STREAMOUT in various
functions in common/profiler/profiler.c.
Unbind all the PM resources explicitly in
nvgpu_profiler_unbind_context() while closing the profiler object.
If resources are bound during a resource reservation request,
unbind the resources explicitly before reserving new resource.
It is responsibility of application to bind the PM resources again.
Bug 2510974
Jira NVGPU-5360
Change-Id: Ib2a0e017eaa23d0d376438771e8bf4e340865f03
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2389655
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add two new functions to reserve/release PM resources :
nvgpu_prof_ioctl_reserve_pm_resource()
nvgpu_prof_ioctl_release_pm_resource()
Add ctxsw field to struct nvgpu_profiler_object to store per-resource
context switch enable flag.
Force resource reservation release while unbinding the context from
profiler object or while closing the profiler object. Add this code
in nvgpu_profiler_unbind_context() since both above paths will call
this function.
Bug 2510974
Jira NVGPU-5360
Change-Id: If334148e8df86360fba4162d1611187f3f04d01b
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2389654
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
The lockless allocator that spins in alloc and free ops using cmpxchg to
mitigate race conditions has only ever been used for the post fences in
preallocated job resources. Now each post fence has a clear owner (the
job struct which already is allocated well) and lifetime, so this
allocator has no longer a purpose. Delete it to avoid bitrot. (The
design of the job queue has always been such that there's minimal
contention in any case.)
Jira NVGPU-5773
Change-Id: Ied98d977c2c75bacfd3d010ce60c80fe709231e0
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2392705
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
As the submit job metadata has been simplified, the fence pool for job
tracking fences is now just complex code for very simple purposes, so
delete it. It's enough to hold the fence memory in the job struct itself
instead of having separately allocated objects with different lifetimes.
Each channel is using preallocated job arrays based on the prespecified
inflight job count. The fences are used for tracking job completion, and
a new job cannot be submitted before a previous wait has completed.
This means that even with a ringbuffer with space for only one job, the
previous job memory cannot get reclaimed by a new submit because the
submits are ordered.
Jira NVGPU-5773
Change-Id: I0c777df700aa7cfda6f971efa47aa72c5462b53a
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2392704
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
