Add REMAP ioctl and accompanying support to the linux nvgpu driver.
REMAP support provides per-page control over sparse VM areas using the
concept of a virtual memory pool.
The REMAP ioctl accepts a list of operations (each a map or unmap) that
modify the VM area pages tracked by the virtual mmemory pool.
Inclusion of REMAP support in the nvgpu build is controlled by the new
CONFIG_NVGPU_REMAP flag. This flag is enabled by default for linux builds.
A new NVGPU_GPU_FLAGS_SUPPORT_REMAP characteristics flag is added for use
in detecting when REMAP support is available.
When a VM allocation tagged with NVGPU_VM_AREA_ALLOC_SPARSE is made the
base virtual memory pool resources are allocated. Per-page resources are
later allocated when the NVGPU_AS_IOCTL_REMAP ioctl is issued. All REMAP
resources are released when the corresponding VM area is freed.
Jira NVGPU-6804
Change-Id: I1f2cdc0c06c1698a62640c1c6fbcb2f9db24a0bc
Signed-off-by: scottl <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2542178
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) Expose logical mask instead of physical mask when MIG is enabled.
For legacy, NvGpu expose physical mask.
2) Added fb related info in struct nvgpu_gpu_instance().
4) Added utility api to get the logical id for a given local id
nvgpu_grmgr_get_gr_gpc_logical_id()
5) Added grmgr api to get max_gpc_count
nvgpu_grmgr_get_max_gpc_count().
5) Added grmgr's fbp api to get num_fbps and its enable masks.
nvgpu_grmgr_get_num_fbps()
nvgpu_grmgr_get_fbp_en_mask()
nvgpu_grmgr_get_fbp_rop_l2_en_mask()
6) Used grmgr's fbp apis in ioctl_ctrl.c
7) Moved fbp_init_support() in nvgpu_early_init()
8) Added nvgpu_assert handling in grmgr.c
9) Added vgpu hal for get_max_gpc_count().
JIRA NVGPU-5656
Change-Id: I90ac2ad99be608001e7d5d754f6242ad26c70cdb
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2538508
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
This is adding two sysfs nodes
1. mig_mode_config: to select the mig_mode
2. mig_mode_config_list: to list the available mig configs.
Added logic to skip gpu dev node creation only for
real MIG physical device.
Added logic to skip the gpu characteristics flags only for
real MIG physical device.
JIRA NVGPU-6633
Change-Id: I4a450b6d658f76e79d89f863c00dffad4558c70f
Signed-off-by: dt <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2499284
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- moved reg fields to gk20a
- added os abstract register accessor in nvgpu/io.h
- defined linux register access abstract implementation
- hook up with posix. posix implementation of the register accessor uses
the high 4 bit of address to identify register apertures then call the
according callbacks.
It helps to unify code across OSes.
Bug 2999617
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Change-Id: Ifcb737e4b4d5b1d8bae310ae50b1ce0aa04f750c
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2497937
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new NVGPU_SUPPORT_MAPPING_MODIFY enable flag that is used to
control the value of the exported NVGPU_GPU_FLAGS_SUPPORT_MAPPING_MODIFY
flag.
These flags are currently only enabled on linux in non-virtualized
environments.
Jira NVGPU-6374
Change-Id: Ia85c353b767b4f7d0aebc04838f44996bc38c61f
Signed-off-by: scottl <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2490986
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add ioctl support to configure and read the max number of lines/ways
in a L2 cache set that can be marked as EVICT_LAST. This is accomplished
through two new ltc hals: set_l2_max_ways_evict_last,
get_l2_max_ways_evict_last. These hals will only be set for nvgpu-next
chips. Incase of legacy chips, the IOCTLs will return error -ENOSYS.
Generate following litter constants to get the number of sets in a l2
slice and the number of ways in each set:
- GPU_LIT_NUM_LTC_LTS_SETS
- GPU_LIT_NUM_LTC_LTS_WAYS
Add gpu characteritics flag: NVGPU_L2_MAX_WAYS_EVICT_LAST_ENABLED to
allow userspace driver to determine if L2_MAX_WAYS_EVICT_LAST ioctl is
supported.
Bug 200605474
Change-Id: Id3180f891399f5e128500f3835d762aee59953e0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2445884
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This CL covers the following code changes,
1) Added some more documentation for gpu_instance_id
and gr_instance_id.
2) Used the gr_sys_pipe_id for gr_instance_id.
2) Removed gr_syspipe_id attribute.
4) Removed NVGPU_GPU_FLAGS_SUPPORT_MIG flag.
3) Changed the device node name to use gpu instance id + syspipe id
combination insted of gpu instance id + gr engine instance id.
Bug 2802347
Change-Id: Id6ca7db5765ab31b5d83472be35dde432c2281ed
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2440532
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Store nvgpu_cdev pointer in struct tsg_private and assign it in
nvgpu_ioctl_tsg_open.
In gk20a_tsg_ioctl_bind_channel_ex(), extract gpu_instance_id from
cdev pointer and then extract instance specific max VEID count from
gpu_instance_id.
Use this max veid count to validate subcontext id coming from user.
Jira NVGPU-5648
Change-Id: I71cea5180e1ced1a72818d160f1a951c1c6ec770
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2438925
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Separate out nvgpu_gpu_fetch_engine_info_item() that populates
engine_id/engine_instance/runlist_id for given nvgpu_device.
Update Existing API nvgpu_gpu_get_engine_info() to use above function.
Add new API nvgpu_gpu_get_gpu_instance_engine_info() that populates
instance specific engine information.
Update NVGPU_GPU_IOCTL_GET_ENGINE_INFO sequence to trigger
nvgpu_gpu_get_gpu_instance_engine_info() for fGPU instances in
MIG mode. Continue using nvgpu_gpu_get_engine_info() in
non-MIG mode and for physical instance in MIG mode.
Jira NVGPU-5648
Change-Id: Ia946748fa2b0c27efa7704847cdf9bb44a0749da
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2436753
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update gk20a_ctrl_dev_ioctl() to fetch gpu_instance_id with
nvgpu_get_gpu_instance_id_from_cdev() and gr_instance_id with
nvgpu_grmgr_get_gr_instance_id().
Get instance specific GR engine configuration pointer with
nvgpu_gr_get_gpu_instance_config_ptr()
Update gk20a_ctrl_ioctl_gpu_characteristics() to return instance
specific characteristics with below changes :
- 0th GPU instance is a physical instance. Set a limited and relevant
characteristics flags for 0th instance.
For rest of the instances and non-MIG mode, continue fetching flags
with nvgpu_ctrl_ioctl_gpu_characteristics_flags.
- nvgpu_set_preemption_mode_flags() should be set only for non-MIG mode
and non-zero instance in MIG mode.
- In MIG mode, 0th instance does not support any classes. Rest of the
instances support only compute, copy and gpfifo classes.
Non-MIG mode supports all the classes including graphics ones.
- Fetch gpu_instance_id/gr_sys_pipe_id/gr_instance_id from gpu_instance
pointer.
- Fetch max_veid_count_per_tsg from gpu_instance pointer.
Also update nvgpu_gr_get_zcull_ptr() and nvgpu_gr_get_zbc_ptr() to
return instance specific pointers. zcull/zbc are not supported in MIG
mode, this is just for consistency of the code.
Jira NVGPU-5648
Change-Id: I764526061542c48ed87659844e16dd0e0253c588
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2436752
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Modify NVGPU_GPU_IOCTL_ALLOC_AS and struct nvgpu_alloc_as_args to
accept start address and size of user memory. This allows configurable
address space allocation.
- Modify gk20a_as_alloc_share() and gk20a_vm_alloc_share() to receive
va_range_start and va_range_end values.
- gk20a_vm_alloc_share() initializes vm with low_hole = va_range_start,
and user vma size = (va_range_end - va_range_start).
- Modify nvgpu_as_alloc_space_args and nvgpu_as_free_space_args to
accept 64 bit number of pages.
Bug 2043269
JIRA NVGPU-5302
Change-Id: I243995adf5b7e0e84d6b36abe3b35a5ccabd7a37
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2385496
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: Sami Kiminki <skiminki@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new API nvgpu_get_gk20a_from_cdev() that extracts gk20a pointer
from cdev pointer. This helps in keeping cdev related implementation
details in ioctl.c and away from other device ioctl files.
Also move struct nvgpu_cdev, nvgpu_class, and nvgpu_cdev_class_priv_data
from os_linux.h to ioctl.h since all of these structures are more IOCTL
related and better to keep them in ioctl specific header.
Jira NVGPU-5648
Change-Id: Ifad8454fd727ae2389ccf3d1ba492551ef1613ac
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2435466
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add new API nvgpu_get_gpu_instance_id_from_cdev() that returns GPU
instance id from nvgpu_cdev pointer.
Store cdev pointer in channel private data channel_priv and ctrl node
private data gk20a_ctrl_priv.
Update below functions to pass cdev pointer :
__gk20a_channel_open()
gk20a_channel_open_ioctl()
In gk20a_channel_ioctl(), extract gpu instance id using cdev pointer
stored in channel_priv and new API nvgpu_get_gpu_instance_id_from_cdev().
Extract GR instance id using nvgpu_grmgr_get_gr_instance_id()
Invoke context creation API inside nvgpu_gr_exec_with_err_for_instance()
so that context is created with correct GR instance id.
Jira NVGPU-5648
Change-Id: I5a4e79165e021b56181d08105b2185306a19703b
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2435465
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Remove static dev node meta data from struct nvgpu_os_linux and replace
it by a dynamic list. Struct nvgpu_os_linux will only keep track of list
head and number of entries.
Add new structure nvgpu_cdev to store meta data of each dev node and
create/setup it dynamically in gk20a_user_init(). Once done, add the new
node under list head maintained in nvgpu_os_linux.
Add a static list dev_node_list[] that contains list of dev node names
and file operations. This static list is used to create nvgpu_cdev data
structures and to register new device nodes.
Update all dev node open file operations (e.g. gk20a_as_dev_open()) to
extract struct gk20a pointer from device pointer of dev node.
gk20a device is the parent of dev node device.
Jira NVGPU-5648
Change-Id: If070c3428afd6215e45b4919335d9f43e04c36f9
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2428500
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Background: There is a race that occurs when l2_fb_ops ioctl is
invoked. The race occurs as part of the flush() call while a
gk20_idle() is in progress.
This patch handles the race by making changes in the l2_fb_ops
ioctl itself. For cases where pm_runtime is disabled or railgate is
disabled, we allow this ioctl call to always go ahead as power is
assumed to be always on.
For the other case, we first check the status of g->power_on. In the
driver, g->power_on is set to true, once unrailgate is completed and is
set to false just before calling railgate.
For linux, the driver invokes gk20a_idle() but there is a delay after
which the call to the rpm_suspend()'s callback gets triggered. This
leads to a scenario where we cannot efficiently rely on the
runtime_pm's APIs to allow us to block an imminent suspend or exit if
the suspend is currently in progress. Previous attempts at solving this
has lead to ineffective solutions and make it much complicated to
maintain the code.
With regards to the above, this patch attempts to simplify the way this
can be solved. The patch calls gk20a_busy() when g->power_on = true.
This prevents the race with gk20a_idle(). Based on the rpm_resume and
rpm_suspend's upstream code, resume is prioritized over a suspend
unless a suspend is already in progress i.e. the delay period has been
served and the suspend invokes the callback. There is a very small
window for this to happen and the ioctl can then power_up the device as
evident from the gk20a_busy's calls.
nvgpu power state is queried using nvgpu_is_powered_off to determine
whether to skip the resume. power state is protected under spinlock.
Bug 200507468
Change-Id: I5c02dfa8ea855732e59b759d167152cf45a1131f
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2299545
(cherry picked from commit 06942bd268)
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2425682
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Delete the struct nvgpu_engine_info as it's essentially identical to
struct nvgpu_device. Duplicating data structures is not ideal as it's
terribly confusing what does what.
Update all uses of nvgpu_engine_info to use struct nvgpu_device. This
is often a fairly straight forward replacement. Couple of places though
where things got interesting:
- The enum_type that engine_info uses is defined in engines.h and
has a bit of SW abstraction - in particular the GRCE type. The only
place this seemed to be actually relevant (the IOCTL providing device
info to userspace) the GRCE engines can be worked out by comparing
runlist ID.
- Addition of masks based on intr_id and reset_id; those can be
computed easily enough using BIT32() but this is an area that
could be improved on.
This reaches into a lot of extraneous code that traverses the fifo
active engines list and dramtically simplifies this. Now, instead of
having to go through a table of engine IDs that point to the list of
all host engines, the active engine list is just a list of pointers to
valid engines. It's now trivial to do a for-all-active-engines type
loop. This could even be turned into a generic macro or otherwise
abstracted in the future.
JIRA NVGPU-5421
Change-Id: I3a810deb55a7dd8c09836fd2dae85d3e28eb23cf
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2319895
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- NvRmGpuDeviceSetSmDebugMode uses regops interface.
- NvRmGpuDeviceTriggerSuspend, NvRmGpuDeviceWaitForPause,
and NvRmGpuDeviceResumeFromPause should return error on Pascal+. Use
regops interface to suspend/resume.
- On non-cilp devices(Maxwell), NvRmGpuDeviceTriggerSuspend,
NvRmGpuDeviceWaitForPause, NvRmGpuDeviceResumeFromPause and
NvRmGpuDeviceSetSmDebugMode are used when debugger(including coredump,
memcheck) is attached or when CUDA application uses a syscall that
requires traphandler(assert, cnp).
Bug 2558022
Bug 2559631
Bug 2706068
JIRA NVGPU-5502
Change-Id: I9eb2ab0c8c75c50f53523d8bf39c75f98b34f3f0
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2376159
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create new dev nodes for device and context profilers. Example of dev
nodes on iGPU
/dev/nvhost-prof-dev-gpu - device scope profiler
/dev/nvhost-prof-ctx-gpu - context scope profiler
Add below APIs to open/close above dev nodes :
nvgpu_prof_dev_fops_open()
nvgpu_prof_ctx_fops_open()
nvgpu_prof_fops_release()
Add common API nvgpu_prof_fops_ioctl() to handle IOCTL call on these
dev nodes. Add IOCTL NVGPU_PROFILER_IOCTL_BIND_CONTEXT to bind the TSG
to profiler objects.
Add nvgpu_tsg_get_from_file() to retrieve TSG struct pointer from
file descriptor. Also store profiler object pointer into TSG struct.
Enable NVGPU_SUPPORT_PROFILER_V2_DEVICE capability on gv11b and tu104.
Note that this is not yet enabled for vGPU.
Keep NVGPU_SUPPORT_PROFILER_V2_CONTEXT capabiity disabled since this
will take longer to support.
Add new IOCTL NVGPU_PROFILER_IOCTL_UNBIND_CONTEXT so that userspace can
explicitly unbind the context and release the resources before closing
the profiler descriptor.
Add context_init flag to profiler object for book keeping.
Bug 2510974
Jira NVGPU-5360
Change-Id: Ie07e0cfd5a9da9d80008f79c955c7ef93b4bc60f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2384354
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below change added capability check in the ioctl. nvgpu is advertising
the support for RESCHEDULE_RUNLIST for all processes even though it
fails the ioctl for non-realtime processes.
Clear the ioctl flag for RESCHEDULE_RUNLIST for non-realtime processes.
commit 838ba0a14d ("gpu: nvgpu: check capability for reschedule runlist submit flag")
Author: David Li <davli@nvidia.com>
Date: Tue Sep 12 18:37:00 2017 -0700
NVGPU_SUBMIT_GPFIFO_FLAGS_RESCHEDULE_RUNLIST is only used by realtime
priority EGL context, which checks for CAP_SYS_NICE during context
creation in userspace, so it wasn't secure against unprivileged program
spoofing submit ioctl with this flag to stall GPU progress of others.
This flag does increase duration of submit by approx 16us,
mostly due to register accesses and PMU FIFO mutex.
Bug 2823941
Change-Id: Iecee3989e5af035264b1ed5c1aa9a8576dd90883
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2372957
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
1) In MIG mode, 2D, 3D, I2M and ZBC classes are not supported by
GR engine. NvGpu shall expose the HWCaps through
"struct nvgpu_gpu_characteristics".
2) NvGpu shall expose the following MIG related new caps through
"struct nvgpu_gpu_characteristics".
* mig_enabled - Flag to indicate whether MIG is enabled/disabled.
* gpu_instance_id - GPU instaces Id.
* gr_instance_id - graphics execution unit id.
* gr_sys_pipe_id - Sys pipe id of GR engine.
3) populate num_ppc_per_gpc - Pixel Processing cluster per GPC
4) populate max_veid_count_per_tsg - Maximum veid count per TSG
5) populate num_sub_partition_per_fbpa - Sub partition per FBPA.
JIRA NVGPU-5762
Change-Id: I06b5bcd3f568eb0b9c78c8fc6ce155b39aaeaba5
Signed-off-by: lm <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2352100
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
On Linux, nvgpu mapping ioctl provides option to specify the access
type flags for the mapping. This support is not implemented for
other OS. For nvrm_gpu to know when to set these flags add new
enabled flag *_MAP_ACCESS_TYPE that is enabled only for Linux.
Bug 200621157
Change-Id: If1397bb0d5fdc5589458d92f24647afa586af1c2
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2363829
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Decouple the fence information needed for providing submit postfences to
userspace by adding a separate type for that and using it to pass fence
data to ioctls.
The data in struct nvgpu_fence_type is used in various places:
- job tracking needs to know when a post fence is expired
- job submitters within the driver (vidmem clears) need to be able to
wait for these fences
- userspace needs the fence as an id, value pair or as a file descriptor
created from an os fence
To keep object lifetimes strict, start decoupling the os fence data out
of struct nvgpu_fence_type: delete nvgpu_fence_install_fd() and add
nvgpu_fence_extract_user() to return a struct nvgpu_user_fence that
contains only the necessary information. Storing the os fence in job
tracking metadata is legacy code and not useful. Passing the os fence
from where it's created through the whole submit path inside this
combined fence type has been convenient, though.
The internally stored cde job fence in dmabuf compression metadata is
still nvgpu_fence_type to keep this patch simple.
Jira NVGPU-5248
Change-Id: I75b7da676fb6aa083828f888c55571bbf7645ef3
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2359064
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Historically, nvgpu has supported a struct gk20a_dmabuf_priv and
associated it with a dmabuf instance. This was aided by Nvmap's
dma_buf_set_drv_data() and dma_buf_get_drvdata() APIs. gk20a_dmabuf_priv
is used to store Comptag IDs i.e. (1 per 64 kb) as well as can store the
dmabuf attachments to avoid multiple attach/detach calls. dma_buf_set_drv_data()
allows Nvgpu to associate an instance of struct gk20a_dmabuf_priv with the instance
of the dmabuf and also provide a release callback to delete the
instance when the last reference to the dmabuf is put. Nvmap accomplishes
this by modifying the struct dma_buf_ops definition to include the
set_drv_data and get_drv_data callbacks in the kernel code.
The above approach won't work for upstream Kstable and Nvmap
plans to remove these APIs for upcoming newer downstream kernels as
well.
In order to implement the same functionality without depending on Nvmap,
Nvgpu will implement a release chaining mechanism. Dmabuf's 'ops' pointer
points to a constant struct and hence a whole copy of the ops is made
followed by altering the new copy's release pointer.
struct gk20a_dmabuf_priv stores the new copy and the dmabuf's 'ops' is
changed to point to this. This allows Nvgpu to retrieve
the corresponding gk20a_dmabuf_priv instance using container_of.
Nvgpu's custom release callback will invoke the original release
callback of the dmabuf's producer as a last step, thus completing the
full circle. In case, the driver is removed, Nvgpu restores the
dmabuf's 'ops' back to the original state. In order to accomplish this,
every instance of a struct nvgpu_os_linux maintains a linkedlist of the
gk20a_dma_buf instances. During the driver removal, this linkedlist is
traversed and the corresponding dmabuf's 'ops' pointer is put back to
its original state followed by freeing of this instance.
Nvgpu is a producer of dmabuf's for vidmem and needs
a way to check whether the given dmabuf belongs to itself.
Its no longer reliable to depend on a comparision of
the 'ops' pointer. Instead dmabuf_export_info() allows a name to be set by the
exporter and this can be used to compare with a memory location
that belongs to Nvgpu. Similarly for sysmem dmabufs, Nvmap makes a
similar change in the way it identifies whether a dmabuf belongs to
itself.
Removed NVGPU_DMABUF_HAS_DRVDATA and moved to a unified mechanism for
both downstream as well as upstream kernel.
Some of the other changes in this file include the following.
1) Deletion of dmabuf.c and moving its contents over to dmabuf_priv.c
2) Replacing gk20a_mm_pin_has_drvdata with nvgpu_mm_pin_privdata and
vice-versa for unpin.
Bug 2878569
Change-Id: Icf8e79b05a25ad5a85f478c3ee0fc1eb7747e22d
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2341001
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Puneet Saxena <puneets@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add NVGPU_SUPPORT_COMPRESSION to indicate if compression feature is
supported in nvgpu. If not, set cbc.init, cbc.ctrl and
cbc.alloc_comptags hals to NULL.
Add corresponding GPU characteristics flag and IOCTL mapping to sync
compression support status with nvrm_gpu.
JIRA NVGPU-4666
Change-Id: I2e685688ddac592b3bb918ee70c82ea5524d695a
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2338926
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
