Follow-up change to rename g->ops.mm.bar1_map (and implementations)
to more specific g->ops.mm.bar1_map_userd.
Also use nvgpu_big_zalloc() to allocate userd slabs memory descriptors.
Bug 2422486
Bug 200474793
Change-Id: Iceff3bd1d34d56d3bb9496c179fff1b876b224ce
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1970891
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We had to force allocation of physically contiguous memory for
USERD in nvlink case, as a channel's USERD address is computed as
an offset from fifo->userd address, and nvlink bypasses SMMU.
With 4096 channels, it can become difficult to allocate 2MB of
physically contiguous sysmem for USERD on a busy system.
PBDMA does not require any sort of packing or contiguous USERD
allocation, as each channel has a direct pointer to that channel's
512B USERD region. When BAR1 is supported we only need the GPU VAs
to be contiguous, to setup the BAR1 inst block.
- Add slab allocator for USERD.
- Slabs are allocated in SYSMEM, using PAGE_SIZE for slab size.
- Contiguous channels share the same page (16 channels per slab).
- ch->userd_mem points to related nvgpu_mem descriptor
- ch->userd_offset is the offset from the beginning of the slab
- Pre-allocate GPU VAs for the whole BAR1
- Add g->ops.mm.bar1_map() method
- gk20a_mm_bar1_map() uses fixed mapping in BAR1 region
- vgpu_mm_bar1_map() passes the offset in TEGRA_VGPU_CMD_MAP_BAR1
- TEGRA_VGPU_CMD_MAP_BAR1 is called for each slab.
Bug 2422486
Bug 200474793
Change-Id: I202699fe55a454c1fc6d969e7b6196a46256d704
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1959032
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
preempt_channel needs to use the channel to pass it to other
public functions, get access to a tsg etc. This qualifies it to take a
pointer to a channel as an input parameter instead of a chid.
Increment the channel ref counter using the function
gk20a_channel_from_id in functions where we get the chid from the h/w
registers directly. Once the prempt_channel function call is done,
use a gk20a_channel_put on the referenced channel.
Jira NVGPU-1461
Change-Id: I6c87c8104cfcb418d468c8c590087fd4aeabf4bd
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1963200
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gv11b_fifo_preempt_tsg needs to access the runlist_id of the tsg as
well as pass the tsg pointer to other public functions such as
gk20a_fifo_disable_tsg_sched. This qualifies the preempt_tsg to use a
pointer to a struct tsg_gk20a instead of just using the tsgid.
Jira NVGPU-1461
Change-Id: I01fbd2370b5746c2a597a0351e0301b0f7d25175
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1959068
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add gk20a_channel_from_id() to retrieve a channel, given a raw channel
ID, with a reference taken (or NULL if the channel was dead). This makes
it harder to mistakenly use a channel that's dead and thus uncovers bugs
sooner. Convert code to use the new lookup when applicable; work remains
to convert complex uses where a ref should have been taken but hasn't.
The channel ID is also validated against FIFO_INVAL_CHANNEL_ID; NULL is
returned for such IDs. This is often useful and does not hurt when
unnecessary.
However, this does not prevent the case where a channel would be closed
and reopened again when someone would hold a stale channel number. In
all such conditions the caller should hold a reference already.
The only conditions where a channel can be safely looked up by an id and
used without taking a ref are when initializing or deinitializing the
list of channels.
Jira NVGPU-1460
Change-Id: I0a30968d17c1e0784d315a676bbe69c03a73481c
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1955400
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently has_timedout variable is protected by wmb at places
where it is being set and there is no correspoding rmb whenever
has_timedout variable is read. This is prone to errors for
concurrent execution. This change is supposed to fix this issue.
Rename has_timedout variable of channel struct to ch_timedout.
Also to avoid rmb every time ch_timedout is read,
ch_timedout_spinlock is added to protect ch_timedout
variable for taking care of concurrent execution.
Bug 2404865
Bug 2092051
Change-Id: I0bee9f50af0a48720aa8b54cbc3af97ef9f6df00
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1930935
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule 21.15 prohibits use of memcpy() with incompatible ptrs
to qualified/unqualified types.
To circumvent this issue we've introduced a new MISRA-compliant
nvgpu_memcpy() function.
This change switches non-offending memcpy usage in vgpu/* code
over to to use nvgpu_memcpy() with appropriate casts applied
to maintain consistency within nvgpu.
JIRA NVGPU-849
Change-Id: Ib62d77929d60bbda64c51d3d81adf66ed155a8a9
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1946262
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-17.7 requires the return value of all functions to be used.
Fix is either to use the return value or change the function to return
void. This patch contains fix for all 17.7 violations instandard C functions
in GPU specific files.
JIRA NVGPU-1036
Change-Id: Iefadc38bdbea4f02de3c24b6ad1c71d6eb0af4bd
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1929903
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In the current code, gk20a.h includes io.h which gets directly included
in a lot of other files. io.h contains methods which uses a struct
gk20a as a parameter leading to a circular dependency between io.h
and gk20a.h. This can be mitigated by removing io.h from gk20a.h as
part of larger effort to moving gk20a.h to nvgpu/gk20a.h
JIRA NVGPU-597
Change-Id: I93e504fa9371b88152737b342a75580c65e8f712
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1787316
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Switch all logging to nvgpu_log*(). gk20a_dbg* macros are
intentionally left there because of use from other repositories.
Because the new functions do not work without a pointer to struct
gk20a, and piping it just for logging is excessive, some log messages
are deleted.
Change-Id: I00e22e75fe4596a330bb0282ab4774b3639ee31e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1704148
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Most of VGPU code is linux specific but lies in common code
So until VGPU code is properly abstracted and made os-independent,
move all of VGPU code to linux specific directory
Handle corresponding Makefile changes
Update all #includes to reflect new paths
Add GPL license to newly added linux files
Jira NVGPU-387
Change-Id: Ic133e4c80e570bcc273f0dacf45283fefd678923
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1599472
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For gp10b and previous chips, RM server will issue fake mmu fault to
reset the channel. And the mmu fault event will be sent to vgpu client,
which will cause the client to abort the channel or tsg.
But on gv11b, RM server doesn't issue fake mmu fault any more. So I need
to abort it right after the force reset is finished.
Jira EVLR-1671
Change-Id: I11399fda84d31086ba1d4ffde5948e409cde2a28
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1597378
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
TSG/CHANNEL_SET_PRIORITY IOCTLs are deprecated and user space should be using
combination of timeslice and interleave levels to decide the priority
Hence remove the IOCTLs and all corresponding APIs
Jira NVGPU-393
Change-Id: I7cf0785689269536eca0c278c774b0e9e74f8c2f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1598581
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split the ctxsw trace "core" API code into <nvgpu/ctxsw_trace.h>. This
is not perect though since there's some Linuxisms present in the HAL
and as such that code has to be hidden by the ctxsw tracing CONFIG. But
this patch should work for QNX such that it will allow the code to
build as long as CONFIG_GK20A_CTXSW_TRACE is not set.
Also fix the copywrite notice in the ctxsw code present under
common/linux to be GPL.
JIRA NVGPU-287
Change-Id: I94715864caf335b7220185492e4629d713b025e0
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1589429
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In current code vgpu only set error notifier for the reporting channel
but abort the whole tsg. When the tsg is aborted, all channels of the
tsg are supposed have had their error notifiers set. Set it for all
channels once any of the channels gets an MMU fault.
For now, RM server still reports num-of-channel times for tsg mmu fault.
We may optimize it in future.
Jira VFND-3798
Change-Id: I6deaca55e7420899af8eabec72ad888d2726ad3c
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1588098
Reviewed-by: Aingara Paramakuru <aparamakuru@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
BAR1 test could occasionally fail when doing CPU write through userd
then reading back through BAR1. This is because nvgpu_smp_mb() only
guarantees ordering between cores.
Replaced with nvgpu_mb() to ensure the write will be visible to all
bus masters in the system.
JIRA EVLR-1959
Bug 200352099
Change-Id: Id002e73d135e0805fca2f153a6de77e210a7b226
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1582928
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Instead of calling the native HAL init function then adding
multiple layers of modification for VGPU, flatten out the sequence
so that all entry points are set statically and visible in a
single file.
JIRA ESRM-30
Change-Id: Ie424abb48bce5038874851d399baac5e4bb7d27c
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1574616
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add abstraction of IO aperture accessors. Add new functions
gk20a_io_exists() and gk20a_io_valid_reg() to remove dependencies to
aperture fields from common code.
Implement Linux version of the abstraction by moving gk20a_readl()
and gk20a_writel() to new Linux specific io.c. Move the fields
defining IO aperture to nvgpu_os_linux.
Add t19x specific IO aperture initialization functions and add t19x
specific section to nvgpu_os_linux.
JIRA NVGPU-259
Change-Id: I09e79cda60d11a20d1099a9aaa6d2375236e94ce
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1569698
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add platform specific operations to enable/disable a TSG and use them instead
of directly calling enable/disable APIs
For gm20b/gp106/gp10b we continue to use gk20a_enable_tsg() and
gk20a_disable_tsg() as platform specific operations
Bug 1739362
Change-Id: I2dd0f38c8303757e8c7a47d8da0e30a790e514f0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1560635
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Remove the mm.get_iova_addr() HAL and replace it with a new HAL
called mm.gpu_phys_addr(). This new HAL provides the real phys
address that should be passed to the GPU from a physical address
obtained from a scatter list. It also provides a mechanism by
which the HAL code can add extra bits to a GPU physical address
based on the attributes passed in. This is necessary during GMMU
page table programming.
Also remove the flags argument from the various address functions.
This flag was used for adding an IO coherence bit to the GPU
physical address which is not supported.
JIRA NVGPU-30
Change-Id: I69af5b1c6bd905c4077c26c098fac101c6b41a33
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1530864
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_log/info/warn/err() internally add a \n to the end of the message.
Hence, callers should not include a \n at the end of the message. Doing
so results in duplicate \n being printed, which ends up creating empty
log messages. Remove the duplicate \n from all err/warn messages.
Bug 1928311
Change-Id: I99362c5327f36146f28ba63d4e68181589735c39
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-on: http://git-master/r/1487232
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add the following ioctls
- NVGPU_CHANNEL_IOCTL_GET_TIMESLICE for channel timeslice in us
- NVGPU_TSG_IOCTL_GET_TIMESLICE for TSG timeslice in us
If timeslice has not been set explicitly, ioctl returns the
default timeslice that will be used when programming the runlist
entry.
Bug 1883271
Change-Id: Ib18fdd836323b1a2d4efceb1e27d07713bd6fca5
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: http://git-master/r/1469040
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
RM server retrieves auxiliary data only from IVM.
Modify IVC commands to send auxiliary data to RM
server using IVM and not as a part command message.
VFND-4166
Change-Id: I9bfe33cf9301f7c70709318b810c622ec57b1cdf
Signed-off-by: Aparna Das <aparnad@nvidia.com>
Reviewed-on: http://git-master/r/1484130
Reviewed-by: svcboomerang <svcboomerang@nvidia.com>
Tested-by: svcboomerang <svcboomerang@nvidia.com>
Hide the Linux specific nvgpu_mem fields so that in subsequent patches
core code can instead of using struct sg_table it can use mem_desc.
Routines for accessing system specific fields will be added as needed.
This is the first step in a fairly major overhaul of the GMMU mapping
routines. There are numerous issues with the current design (or lack
there of): massively coupled code, system dependencies, disorganization,
etc.
JIRA NVGPU-12
JIRA NVGPU-30
Change-Id: I2e7d3ae3a07468cfc17c1c642d28ed1b0952474d
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1464076
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a_err() and gk20a_warn() require a struct device pointer,
which is not portable across operating systems. The new nvgpu_err()
and nvgpu_warn() macros take struct gk20a pointer. Convert code
to use the more portable macros.
JIRA NVGPU-16
Change-Id: I071e8c50959bfa81730ca964d912bc69f9c7e6ad
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1457355
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rename the nvgpu DMA APIs from gk20a_gmmu_alloc* to nvgpu_dma_alloc*.
This better reflects the purpose of the APIs (to allocate DMA suitable
memory) and avoids confusion with GMMU related code.
JIRA NVGPU-12
Change-Id: I673d607db56dd6e44f02008dc7b5293209ef67bf
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1325548
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
