Add support for powering off IGPU for switching between
legacy to SMC mode/vice-versa or changing SMC configuration.
The power off can be issued as follows
echo 0 > /dev/nvgpu/igpu0/power
The following steps are done during a poweroff.
1) Deterministic channel idle
2) Acquire write_lock on l->busy semaphore.
3) Wait till power_usage decrements to indicate 0 active jobs.
4) Invoke pm_runtime_put_sync_suspend()
5) Invoke nvgpu_gr_remove_support() to clear existing GR memory.
6) Release write_lock on l->busy
7) Deterministic channel unidle.
Part of the sequence matches that of the gk20a_do_idle code.
The common parts are extracted into new functions
gk20a_block_new_jobs_and_idle() and gk20a_unblock_jobs()
For joint-rail case, the current implementation, does a railgate
and then sets pm_runtime_set_autosuspend_delay(-1) to disable
regular runtime resume/suspend.
Remove clearing of NVGPU_SUPPORT_MIG status during state change
ias it leads to inconsistencies.
Jira NVGPU-6920
Change-Id: I0b3eb3278176122ac061c1e8a94ebfb3c17c3925
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2578501
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: Antony Clince Alex <aalex@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Move interrupt specific data-members from common.mc to common.cic
Some of these data members like sw_irq_stall_last_handled_cond need
To be initialized much earlier during the OS specific init/probe stage.
Also, some more members from struct nvgpu_interrupts(like stall_size,
stall_lines[]), which will soon be moved to CIC will also need to be
initialized early during the OS specific probe stage.
However, the chip specific LUT can only be initialized after the
hal_init stage where the HALs are all initialized.
Split the CIC init to accommodate the above initialization requirements.
JIRA NVGPU-6899
Change-Id: I9333db4cde59bb0aa8f6eb9f8472f00369817a5d
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2552535
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Add gops_fbp_fs and gops_gpc_pg struct
- Add HALs to write to NV_FUSE_CTRL_OPT_FBP and
NV_FUSE_CTRL_OPT_GPC fuses needed for floorsweeping
- Add set_fbp_mask and set_gpc_mask to probe FBP and GPC mask
respectively during gpu probe
- Add sysfs node: fbp_fs_mask and gpc_fs_mask to store
FBP and GPC floorsweeping mask sent from userspace
- Move the floorsweeping programming early in NVGPU’s GPU init
function and then issue a PRI init.
JIRA NVGPU-6433
Change-Id: I84764d625c69914c107e1e8c7f29c476c2f64f78
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2499571
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Changes:
- This change will only init gsp software
state, nvgpu_gsp_bootstrap need to be called.
- CONFIG_NVGPU_GSP_SCHEDULER flag is created to
compile out the gsp scheduler code when needed.
- Created GSP engine reset which is needed when
ACR completed execution and need to load gsp fw.
NVGPU-6783
Signed-off-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Change-Id: I2ce43e512b01df59443559eab621ed39868ad158
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2554267
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This CL covers the following modifications,
1) Added logic to skip the graphics unit specific sw context load
register write during context creation when MIG is enabled.
2) Added logic to skip the graphics unit specific sw method
register write when MIG is enabled.
3) Added logic to skip the graphics unit specific slcg and blcg gr
register write when MIG is enabled.
4) Fixed some priv errors observed during MIG boot.
5) Added MIG Physical support for GPU count < 1.
6) Host clk register access is not allowed for GA100.
So skipped to access host clk register.
7) Added utiliy api - nvgpu_gr_exec_with_ret_for_all_instances()
8) Added gr_pri_mme_shadow_ram_index_nvclass_v() reg field
to identify the sw method class number.
Bug 200649233
Change-Id: Ie434226f007ee5df75a506fedeeb10c3d6e227a3
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2549811
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.cic unit is divided into common.cic.mon and common.cic.rm
based on rm and mon process split.
CIC-mon subunit includes the code which is utilized in critical
interrupt handling path like initialization, error detection and
error reporting path. CIC-rm subunit includes the code corresponding
to rest of interrupt handling(like collecting error debug data from
registers) and ISR status management (status of deferred interrupts).
Split the CIC APIs and data-members into above two subunits.
JIRA NVGPU-6899
Change-Id: I151b59105ff570607c4a62e974785e9c1323ef69
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551897
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add REMAP ioctl and accompanying support to the linux nvgpu driver.
REMAP support provides per-page control over sparse VM areas using the
concept of a virtual memory pool.
The REMAP ioctl accepts a list of operations (each a map or unmap) that
modify the VM area pages tracked by the virtual mmemory pool.
Inclusion of REMAP support in the nvgpu build is controlled by the new
CONFIG_NVGPU_REMAP flag. This flag is enabled by default for linux builds.
A new NVGPU_GPU_FLAGS_SUPPORT_REMAP characteristics flag is added for use
in detecting when REMAP support is available.
When a VM allocation tagged with NVGPU_VM_AREA_ALLOC_SPARSE is made the
base virtual memory pool resources are allocated. Per-page resources are
later allocated when the NVGPU_AS_IOCTL_REMAP ioctl is issued. All REMAP
resources are released when the corresponding VM area is freed.
Jira NVGPU-6804
Change-Id: I1f2cdc0c06c1698a62640c1c6fbcb2f9db24a0bc
Signed-off-by: scottl <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2542178
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The CONFIG_NVGPU_NEXT config is no longer required now that ga10b and
ga100 sources have been collapsed. However, the ga100, ga10b sources
are not safety certified, so mark them as NON_FUSA by replacing
CONFIG_NVGPU_NEXT with CONFIG_NVGPU_NON_FUSA.
Move CONFIG_NVGPU_MIG to Makefile.linux.config and enable MIG support
by default on standard build.
Jira NVGPU-4771
Change-Id: Idc5861fe71d9d510766cf242c6858e2faf97d7d0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2547092
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add api to translate dmabuf's fmode_t to gk20a_mem_rw_flag
for read only/read write mapping selection.
By default dmabuf fd mapping permission should be a maximum
access permission associated to a particual dmabuf fd.
Remove bit flag MAP_ACCESS_NO_WRITE and add 2 bit values for
user access requests NVGPU_VM_MAP_ACCESS_DEFAULT|READ_ONLY|
READ_WRITE.
To unify map access type handling in Linux and QNX move the
parameter NVGPU_VM_MAP_ACCESS_* check to common function
nvgpu_vm_map.
Set MAP_ACCESS_TYPE enabled flag in common characteristics
init function as it is supported for Linux and QNX.
Bug 200717195
Bug 3250920
Change-Id: I1a249f7c52bda099390dd4f371b005e1a7cef62f
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2507150
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
When force closing the app, poweron needed in channel close path will
fail as pg_task kthread creation fails with -EINTR (process is
SIGKILL'd so threads don't get created).
Upon poweron failure, device nodes are removed and the nvgpu power
state is not reset to NVGPU_STATE_POWERED_OFF. Hence on further
gk20a_busy attempts, poweron is not attempted and gpu remains
unusable from thereon.
Change the state to POWERED_OFF from POWERING_ON on poweron fail.
Bug 3308828
Change-Id: I2360f11a4937dfe93eb7933b30c13748fb570898
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2543797
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Presently, gk20a_user_deinit is used to remove all device nodes
including "power" node as well.
Split removal of power node into a separate function
gk20a_power_node_deinit to enable other device removal during the
normal runtime_suspend path to facilitate the fast path for MIG
reconfiguration. Powernode can be removed only during a call to
Rmmod. This also enables separately powering off the device nodes
in the unlikely case of a poweron failure.
Bug 3308828
Jira NVGPU-6920
Change-Id: Ib045a09a992a63c468492a837b273cca41e20f15
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2543014
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
CIC (Central Interrupt controller) will be responsible for the
interrupt handling. common.cic unit is the placeholder for all
interrupt related code. Move interrupt related defines and
Public APIs present in common.mc to common.cic.
Note: The common.mc interrupts related struct definitions are
not moved as part of this patch.
Adapt the code to use interrupt handling related defines and public
APIs migrated from common.mc to common.cic
JIRA NVGPU-6899
Change-Id: I747e2b556c0dd66d58d74ee5bb36768b9370d276
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2535618
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, there are few chip specific erratas present in nvgpu code.
For better traceability of the erratas and corresponding fixes,
introduce flags to indicate existing erratas on a chip. These flags
decide if a corresponding solution is applied to the chip(s).
This patch introduces below functions to handle errata flags:
- nvgpu_init_errata_flags
- nvgpu_set_errata
- nvgpu_is_errata_present
- nvgpu_print_errata_flags
- nvgpu_free_errata_flags
nvgpu_print_errata_flags: print below details of erratas present in chip
1. errata flag name
2. chip where the errata was first discovered
3. short description of the errata
Flags corresponding to erratas present in a chip are set during chip hal
init sequence.
JIRA NVGPU-6510
Change-Id: Id5a8fb627222ac0a585aba071af052950f4de965
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2498095
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
1) NvGpu dev node needs to be created in gpu power on
early stage to avoid latency introduced by udevd.
For creating dev node, device and grmgr init
needs to move to early stage of GPU power on.
After grmgr init, NvGpu can identify the number of MIG
instance required for each physical GPU.
For that, added a new API nvgpu_early_poweron() to handle
early init which is required for before dev node creation.
2) Removed fifo dependency in nvgpu_init_gr_manager()
3) Used get_max_subctx_count() directly to query
the veid/subctx count.
JIRA NVGPU-6633
Change-Id: Ib9d7c3e184c71237b0da9305515ccd8ceda1d5ad
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2517173
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- This is deferring the dev_nodes creation after power_on to
select the MIG config and to create the dev_nodes as per the
selected MIG config.
- The patch is adding a device node to issue power on. The
nodes are:
for igpu :/dev/nvgpu/igpu0/power
for dgpu:/dev/nvgpu/dgpu-0001:01:00.0/power
To issue power on :
echo "1" > /dev/nvgpu/igpu0/power
echo "1" > /dev/nvgpu/dgpu-0001:01:00.0/power
JIRA NVGPU-6633
Change-Id: Ic4f1f3e42724cc788dcfaf0e881d188fd3bd1ce1
Signed-off-by: dt <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2512647
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- moved reg fields to gk20a
- added os abstract register accessor in nvgpu/io.h
- defined linux register access abstract implementation
- hook up with posix. posix implementation of the register accessor uses
the high 4 bit of address to identify register apertures then call the
according callbacks.
It helps to unify code across OSes.
Bug 2999617
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Change-Id: Ifcb737e4b4d5b1d8bae310ae50b1ce0aa04f750c
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2497937
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This is one of the steps in restructuring of interrupt code.
- Move ISR logic to common code. This will allow us to add mixed ASIL
error handling levels.
- Modify nonstall ISR to use threaded interrupts. Bottom half of
nonstall ISR will run nonstall operations instead of adding work to
workqueues.
- Remove nonstall workqueue implementation.
JIRA NVGPU-6351
Change-Id: I5f891b0de4b0c34f6ac05522a5da08dc36221aa6
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2467713
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new NVGPU_SUPPORT_MAPPING_MODIFY enable flag that is used to
control the value of the exported NVGPU_GPU_FLAGS_SUPPORT_MAPPING_MODIFY
flag.
These flags are currently only enabled on linux in non-virtualized
environments.
Jira NVGPU-6374
Change-Id: Ia85c353b767b4f7d0aebc04838f44996bc38c61f
Signed-off-by: scottl <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2490986
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Extend the runtime suspend/resume based idle/unidle logic in the
probe case to handling done in gk20a_do_idle/unidle for nvgpu
after the probe completion.
If the railgating is disabled, setting autosuspend_delay to 0 will
enable the suspend. If railgating is enabled, autosuspend delay
will be > 0. Setting it to 0 will enable the immediate suspend.
With this approach based on RPM, forced_reset logic is removed.
force_reset_in_do_idle is also removed as railgating is
supported.
Bug 200602747
JIRA NVGPU-5356
Change-Id: Iaf6d5ab651b8200f0547b45d90f812110cf63c0e
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2375941
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
With genpd based runtime PM, the device railgating is managed by the PM
core and the nvgpu manages the clocks. To suspend/resume the device for
idling/unidling while initializing secure alloc, runtime PM is to be
enabled during probe.
nvgpu platform railgate handlers will be only managing the clocks.
During probe, the nvgpu driver poweroff/poweron are not to be
invoked as part of driver runtime suspend/resume hence probe
state is added.
After platform probe initializes the clock, explicit runtime resume of
the device is required to sanely suspend it during gk20a_do_idle.
Runtime PM configuration differs based on the NVGPU_CAN_RAILGATE
capability, hence the runtime PM is enabled ("truly") only for
the duration of nvgpu_probe and then the state is reverted at
the beginning of gk20a_pm_late_init.
Bug 200602747
JIRA NVGPU-5356
Change-Id: I1fbd03d3f49da07ccbee9714387e00ffc688864e
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2375939
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove static class definition and registration for iGPU and dGPU.
Create the class dynamically in gk20a_user_init() and setup the callback
function to create devnode name based on GPU type.
For now add nvgpu_pci_devnode() callback for dGPU that sets correct
dev node path for dGPUs. For iGPU, Android apparently does not honor dev
node path set in callback and hence override the device name for iGPU
with function nvgpu_devnode().
Destroy the class in gk20a_user_deinit().
This will overall be helpful in adding multiple classes and dev nodes
for each GPU instance in MIG mode.
Set GPU device pointer as the parent of new devices created with
device_create(). This is helpful in getting GPU device name in
callback function nvgpu_pci_devnode().
Update functions to not pass class structure and interface names :
nvgpu_probe()
gk20a_user_init()
gk20a_user_deinit()
nvgpu_remove()
Remove static interface name format like INTERFACE_NAME since it is no
longer needed.
Update GK20A_NUM_CDEVS to 10 since there are 10 dev nodes per GPU right
now.
Jira NVGPU-5648
Change-Id: I5d41db5a0f87fa4a558297fb4135a9fbfcd51080
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2423492
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
* Removed unnecessary irqs_enabled flag, and
Replaced enable/disable irq logics with nvgpu variant functions.
* Added nvgpu_interrupts data structure to hold interrupt details.
* Interpret all stall irqs first and followed by nonstall irq from dt.
* Used interrupt size checks for enable/disable irqs instead of
comparing stall and nonstall interrupt lines.
Now adding new stall interrupt lines as easy as just updating macro.
Jira NVGPU-6019
Change-Id: I5a5eaa8d333c68ee87d25d2b45ec244ec8d7b297
Signed-off-by: Sagar Kadamati <skadamati@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2400777
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.gr unit exports a separate API nvgpu_gr_prepare_sw to
initialize some SW pieces required for nvgpu_gr_enable_hw().
A separate API is really unnecessary since same initialization
can be performed in nvgpu_gr_alloc().
Remove nvgpu_gr_prepare_sw() and HAL gops.gr.gr_prepare_sw().
Initialize falcon and interrupt structures in loop from
nvgpu_gr_alloc().
Move nvgpu_netlist_init_ctx_vars() from nvgpu_gr_prepare_sw() to
common init path since netlist parsing need not be done from
common.gr unit. It just needs to happen before nvgpu_gr_enable_hw().
Also, trigger nvgpu_gr_free() from gr_remove_support() instead
of OS specific paths. Also remove nvgpu_gr_free() calls from
probe error paths since nvgpu_gr_alloc is no longer called in
probe path.
Move interrupt and falcon data structure free calls to nvgpu_gr_free().
Also remove corresponding unit testing code that tests
nvgpu_gr_prepare_sw() specifically.
Update some unit tests to initialize ecc counters and netlist.
Disable some unit tests that fail for reasons unknown.
Jira NVGPU-5648
Change-Id: I82ec8160f76530bc40e0c11a9f26ba1c8f9cf643
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2400166
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
struct nvgpu_gr is right now initialized during probe and from OS
specific code. To support multiple instances of graphics engine,
nvgpu needs to initialize nvgpu_gr after number of engine instances
have been enumerated in poweron path.
Hence move nvgpu_gr_alloc() to poweron path and after gr manager has
been initialized.
Some of the members of nvgpu_gr are initialized in probe path and they
too are in OS specific code. Move them to common code in
nvgpu_gr_alloc()
Add field fecs_feature_override_ecc_val to struct gk20a to store the
override flag read from device tree. This flag is later copied to
nvgpu_gr in poweron path.
Update tpc_pg_mask_store() to check for g->gr being NULL before
accessing golden image pointer.
Update tpc_fs_mask_store() to return error if g->gr is not initialized.
This path needs nvgpu_gr struct initialized. Also fix the incorrect
NULL pointer check in tpc_fs_mask_store() which breaks the write path
to this sysfs.
Jira NVGPU-5648
Change-Id: Ifa2f66f3663dc2f7c8891cb03b25e997e148ab06
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2397259
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Kstable branch is getting rid of all downstream patches. This also
removes support for NVGPU build as kernel overlays will no longer be
supported.
In order to move towards a uniform out of tree build
system, nvgpu must manage the CONFIGS present in Kconfig itself and stop
relying on Kconfigs.
A new file Makefile.linux.configs is created to house these configs temporarily.
This file is included as part of the linux Makefile. Eventually the plan is to
move towards using Makefile.shared.configs.
This takes us one more step closer to having out of tree module building
for NVGPU internal builds.
With this change, kstable can still go ahead with building extmod builds for NVGPU.
This also allows downstream builds to continue as in-tree builds as long as the
overlays are set for the downstream kernels.
Bug 200617256
Change-Id: I78aae6b02521e2a07e8e74aa401ffdfaf9d8cf7c
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2369209
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
On Linux, nvgpu mapping ioctl provides option to specify the access
type flags for the mapping. This support is not implemented for
other OS. For nvrm_gpu to know when to set these flags add new
enabled flag *_MAP_ACCESS_TYPE that is enabled only for Linux.
Bug 200621157
Change-Id: If1397bb0d5fdc5589458d92f24647afa586af1c2
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2363829
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Historically, nvgpu has supported a struct gk20a_dmabuf_priv and
associated it with a dmabuf instance. This was aided by Nvmap's
dma_buf_set_drv_data() and dma_buf_get_drvdata() APIs. gk20a_dmabuf_priv
is used to store Comptag IDs i.e. (1 per 64 kb) as well as can store the
dmabuf attachments to avoid multiple attach/detach calls. dma_buf_set_drv_data()
allows Nvgpu to associate an instance of struct gk20a_dmabuf_priv with the instance
of the dmabuf and also provide a release callback to delete the
instance when the last reference to the dmabuf is put. Nvmap accomplishes
this by modifying the struct dma_buf_ops definition to include the
set_drv_data and get_drv_data callbacks in the kernel code.
The above approach won't work for upstream Kstable and Nvmap
plans to remove these APIs for upcoming newer downstream kernels as
well.
In order to implement the same functionality without depending on Nvmap,
Nvgpu will implement a release chaining mechanism. Dmabuf's 'ops' pointer
points to a constant struct and hence a whole copy of the ops is made
followed by altering the new copy's release pointer.
struct gk20a_dmabuf_priv stores the new copy and the dmabuf's 'ops' is
changed to point to this. This allows Nvgpu to retrieve
the corresponding gk20a_dmabuf_priv instance using container_of.
Nvgpu's custom release callback will invoke the original release
callback of the dmabuf's producer as a last step, thus completing the
full circle. In case, the driver is removed, Nvgpu restores the
dmabuf's 'ops' back to the original state. In order to accomplish this,
every instance of a struct nvgpu_os_linux maintains a linkedlist of the
gk20a_dma_buf instances. During the driver removal, this linkedlist is
traversed and the corresponding dmabuf's 'ops' pointer is put back to
its original state followed by freeing of this instance.
Nvgpu is a producer of dmabuf's for vidmem and needs
a way to check whether the given dmabuf belongs to itself.
Its no longer reliable to depend on a comparision of
the 'ops' pointer. Instead dmabuf_export_info() allows a name to be set by the
exporter and this can be used to compare with a memory location
that belongs to Nvgpu. Similarly for sysmem dmabufs, Nvmap makes a
similar change in the way it identifies whether a dmabuf belongs to
itself.
Removed NVGPU_DMABUF_HAS_DRVDATA and moved to a unified mechanism for
both downstream as well as upstream kernel.
Some of the other changes in this file include the following.
1) Deletion of dmabuf.c and moving its contents over to dmabuf_priv.c
2) Replacing gk20a_mm_pin_has_drvdata with nvgpu_mm_pin_privdata and
vice-versa for unpin.
Bug 2878569
Change-Id: Icf8e79b05a25ad5a85f478c3ee0fc1eb7747e22d
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2341001
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Puneet Saxena <puneets@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The sync file support in Linux has been stabilized and the new config is
called CONFIG_SYNC_FILE. Even if maybe not so intended, both the
stabilized version and the legacy CONFIG_SYNC can coexist; to begin with
supporting the stabilized version, add CONFIG_NVGPU_SYNCFD_ANDROID and
CONFIG_NVGPU_SYNCFD_NONE as choice configs of which one will be set. A
later patch will extend this with a choice for CONFIG_SYNC_FILE.
Jira NVGPU-5353
Change-Id: I67582b68d700b16c46e1cd090f1b938067a364e3
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2336118
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Aggressive sync destroy is used on some platforms where the amount of
syncpoints is limited. It can cause sync objects to get allocated and
freed in the submit path and when jobs are cleaned up, so require
deferred cleanup. Allocations do not belong to job tracking in a
deterministic submit path.
Although this has been technically allowed before, deterministic
channels have likely not been a priority on those old platforms with
aggressive sync destroy set.
Update virtualized gp10b platform data to match on a gp10b-vgpu compat
string instead of gk20a-vgpu. gk20a (Tegra T124) hasn't been supported
for a long time. Delete the aggressive sync destroy field from this
platform. It's got enough syncpoints to not dynamically allocate them;
having this property set for gp10b-vgpu has likely been a mistake.
This is not a completely pure cherry-pick: also extend the gpu
characteristics to not advertise full deterministic submit support when
aggressive sync destroy is off. This platform flag cannot be adjusted by
the user unlike many other flags.
Jira NVGPU-4548
Change-Id: I283f546d48b79ac94b943d88e5dce55710858330
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2322042
(cherry picked from commit b1ba2b997b2174e365bcb0782ef3e67260ff9e57)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2328411
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, for platforms with canRailgate device characteristics disabled,
suspend can block as deterministic channels hold busy references. This
patch makes the change to first hold off any new jobs for deterministic
channels and then reverts back the busy references taken by those
channels. Following this, suspend also waits for the device to get idle
by waiting (with timeout) for the nvgpu's internal usage counter to be
come zero. This ensures there are no further jobs in progress and
allows the system to go into a suspend state.
Bug 200598228
Bug 2930266
Change-Id: Id02b4d41a9c2dd64303b2e2449dbed48c12aea4c
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2328489
(cherry picked from commit 9d1e07ca18)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2330159
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) added support for fuse clock directly from nvgpu linux build for GV11B
and GP10B.
2) added a common function platform_acquire_clock thats used by both
GP10B, GV11B to acquire their respective clocks.
3) remove use of tegra_fuse_clock_enable/disable APIs
The clock parsing code is changed to verify the clock-names obtained
via DT with the static clock-names in the platform code before proceeding
with clk_enable.
Bug 2887230
Change-Id: I177cde9c4bf1a8be6f3437f36e1c6f75cd9c9279
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2307136
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
- "include/trace/events/gk20a.h" file was having GPL2 license
(which should not used for QNX code). This file was used for
compiling linux userspace driver("libnvgpu-drv.so") and was used for
unit testing on QNX.
- This patch removes stubs in "include/trace/events/gk20a.h" file.
(which were used for linux userspace driver.)
- For QNX driver, "nvgpu_rmos/trace/events/gk20a.h" was used.
This patch moves that file to "include/nvgpu/posix/trace_gk20a.h" and
does relevant license change. This same file will be used for linux
userspace driver.
- This patch also creates a new file "include/nvgpu/trace.h" which
selects proper trace file depending on the config.
Bug 2802414
Change-Id: Icdfb251e5698073f986753a969e804161af3ecc5
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2286388
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The devinit executes in parallel with PCIE link training
to reduce exit latency. Therefore, all PCIE settings that
normally occur during devinit after the PCIE link is up are
deferred until nvgpu has resumed control.
Bug 2661545
Change-Id: Ifdd4f645b2e1791d93567cc34d6ab0691a25d101
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2210625
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
