When virtualized, the guest OS has no direct access to
PMU functionality:
- Don't create debugfs entries that rely on PMU access
- Clean up PMU vgpu HAL entries that imply that PMU access
is supported
Bug 200543218
Change-Id: I12730b600802448a240f3de042760041d3ae7d29
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2213650
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
IRQs can get triggered during nvgpu power-on due to MMU fault, invalid
PRIV ring or bus access etc. Handlers for those IRQs can't access the
full state related to the IRQ unless nvgpu is fully powered on.
In order to let the IRQ handlers know about the nvgpu power-on state
gk20a.power_on_state variable has to be protected through spinlock
to avoid the deadlock due to usage of earlier power_lock mutex.
Further the IRQs need to be disabled on local CPU while updating the
power state variable hence use spin_lock_irqsave and spin_unlock_-
irqrestore APIs for protecting the access.
JIRA NVGPU-1592
Change-Id: If5d1b5e2617ad90a68faa56ff47f62bb3f0b232b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2203860
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Modified PMU subunits init sequence as they required during PMU RTOS
initialize stage, function nvgpu_pmu_early_init() allocates space for
all its subunit & its default values for further usage during runtime,
and function nvgpu_pmu_init() performs setup for sub units & starts
PMU-RTOS boot.
Deinit of all sub units allocated space will handled as part of
remove_support stage & also, during init stage upon failure of
init/setup sequence.
JIRA NVGPU-1972
Change-Id: I3ead9f9bb9e9c1178a02fc99eeec276660477325
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110154
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Some functions are not accessing hardware directly
but are being called using HAL ops: For example
g->ops.pmu.pmu_elpg_statistics,
g->ops.pmu.pmu_pg_init_param,
g->ops.pmu.pmu_pg_supported_engines_list,
g->ops.pmu.pmu_pg_engines_feature_list,
g->ops.pmu.pmu_is_lpwr_feature_supported,
g->ops.pmu.pmu_lpwr_enable_pg,
g->ops.pmu.pmu_lpwr_disable_pg,
g->ops.pmu.pmu_pg_param_post_init,
g->ops.pmu.save_zbc
Change the function access by using sw ops, like:
Create new functions:
int nvgpu_pmu_elpg_statistics(struct gk20a *g, u32 pg_engine_id,
struct pmu_pg_stats_data *pg_stat_data);
void nvgpu_pmu_save_zbc(struct gk20a *g, u32 entries);
bool nvgpu_pmu_is_lpwr_feature_supported(struct gk20a *g,
u32 feature_id);
JIRA NVGPU-3209
Change-Id: I6db9b43c7c4a5054720a72487302b740b091044d
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110963
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Some functions are not accessing hardware directly
but are being called using HAL ops: For example
.pmu_init_perfmon = nvgpu_pmu_init_perfmon_rpc,
.pmu_perfmon_start_sampling = nvgpu_pmu_perfmon_start_sampling_rpc,
.pmu_perfmon_stop_sampling = nvgpu_pmu_perfmon_stop_sampling_rpc,
.pmu_perfmon_get_samples_rpc = nvgpu_pmu_perfmon_get_samples_rpc,
These were being called by:
g->ops.pmu.pmu_init_perfmon,
g->ops.pmu.pmu_perfmon_start_sampling,
g->ops.pmu.pmu_perfmon_stop_sampling,
g->ops.pmu.pmu_perfmon_get_samples_rpc
Change the function access by using sw ops, like:
Create new functions:
int nvgpu_pmu_perfmon_init(struct gk20a *g,
struct nvgpu_pmu *pmu, struct nvgpu_pmu_perfmon *perfmon);
int nvgpu_pmu_start_sampling_perfmon(struct gk20a *g,
struct nvgpu_pmu *pmu, struct nvgpu_pmu_perfmon *perfmon);
int nvgpu_pmu_stop_sampling_perfmon(struct gk20a *g,
struct nvgpu_pmu *pmu, struct nvgpu_pmu_perfmon *perfmon);
int nvgpu_pmu_get_samples_rpc_perfmon(struct gk20a *g,
struct nvgpu_pmu *pmu, struct nvgpu_pmu_perfmon *perfmon);
and based on hardware chip call the chip specific
perfmon sw init function: nvgpu_gv11b_perfmon_sw_init() and
nvgpu_gv100_perfmon_sw_init() and assign the sw ops for perfmon
JIRA NVGPU-3210
Change-Id: I2470863f87a7969e3c0454fa48761499b08d445c
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109899
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Currently PG task is created for both iGPU & dGPU as part PMU init
sequence path, but task is not required for dGPU or can be skipped
if ELPG is not supported on iGPU, made changes to create PG task only
if supported else skip it, and made some functions to private as these
are required by PG UNIT only.
-PG instance is allocated & set to default properties as needed if
support is enabled else skip it.
-Made changes in dependent files as required to reflect above changes
JIRA NVGPU-1972
Change-Id: I4efb7f1814a9ad48770acea2173e66f0a4c8a9c1
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094840
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Move the perfmon unit source code to common/pmu/perfmon/ folder
- Separate perfmon unit headers under include/nvgpu/pmu/pmu_perfmon.h
- Make a new structure: nvgpu_pmu_perfmon for perfmon unit
- This new struct combines all perfmon unit variables like
perfmon_query, perfmon_ready etc. into one
structure as a part of perfmon unit refactoring.
- Use pmu_perfmon struct to access all perfmon variables.
- Eg: pmu->pmu_perfmon->perfmon_query, pmu->pmu_perfmon->perfmon_ready
and so on.
JIRA NVGPU-1961
Change-Id: I57516c646bfb256004dd7b719e40fafd3c2a09b2
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2080555
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Make a new structure: nvgpu_pmu_pg for PG unit
- This new struct combines all PG unit variables like
elpg_stat, elpg_refcnt, pg_init etc. into one
structure as a part of PG unit refactoring.
- Use pmu_pg struct to access all PG variables.
- Eg: &pmu->pmu_pg.elpg_mutex, &pmu->pmu_pg.pg_mutex
and so on.
NVGPU-1973
Change-Id: I9973072826f4089f6315827bce49fa30dbcbcdda
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2071306
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-17.7 requires the return value of all functions to be used.
Fix is either to use the return value or change the function to return
void. This patch contains fix for all 17.7 violations instandard C functions
in OS/Linux interface.
JIRA NVGPU-1036
Change-Id: I39b20f1d0e1a1da56d452f2c3d5ee049666cefe8
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1929900
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
