- During driver unload, shutdown or RG path as part of
pmu destroy, pmu sequences have to be cleaned up to
free payload memory and allocation info which is stored
as part of pmu_sequence.
- While doing so there can be race condition with pmu_isr
or nvgpu_pmu_rpc_execute path where it waits for fw ack.
- This race condition can lead to freeing of payload memory
before nvgpu_pmu_sequences_cleanup() does.
- This can lead to memory corruption or double free issue
when the cleanup code again tries to free the payload mem.
- To resolve this add a new function nvgpu_pmu_seq_free_release()
which will check for seq->id in pmu seq tbl before freeing the
memory and other info from pmu_sequence.
- Use this nvgpu_pmu_seq_free_release() in non-blocking RPC calls
and also when fw ack fails or driver is dying scenario.
- For blocking call, synchronise freeing of rpc payload memory by
using a new boolean seq_free_status.
Bug 4019694
Bug 4059157
Change-Id: Id45a6914a2d383a654539a87861c471a77fb6850
Signed-off-by: Divya <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2882210
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
- During nvgpu module unload, the poweroff sequence
will not wait for the ACK from the PMU for the RPCs sent.
- Due to this, rpc_payload struct info will be present
in pmu seq struct.
- This can lead to memory corruption during unload path.
- To avoid this, return a different value for driver shutting
down scenario from fw ack function and based on this return value
free the RPC payload and release the respective pmu sequence struct.
Bug 3789998
Change-Id: I25104828d836ae37e127b40c88209da81754ffb8
Signed-off-by: Divya <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2839968
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
nvgpu_pmu_rpc_execute takes pmu rpc header address and dereferences
it at address past header based on rpc struct that the header is
part of.
This usage of pointer is not right and confuses CERT checker.
Instead, pass the rpc struct address as char pointer and use
as header or rpc struct as per need.
CID 17141
CID 154223
CID 17557
CID 154226
CID 153904
CID 153926
CID 153929
CID 153925
CID 153925
CID 225346
CID 225355
CID 225356
CID 225360
CID 225361
CID 225365
CID 225367
CID 296735
CID 330244
CID 17557
Bug 3512546
Change-Id: I93b154d4321e75c0d2b41f43d7c2b701682962a3
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2710224
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
GVS: Gerrit_Virtual_Submit
nvgpu_timeout_init() returns an error code only when the flags parameter
is invalid. There are very few possible values for flags, so extract the
two most common cases - cpu clock based and a retry based timeout - to
functions that cannot fail and thus return nothing. Adjust all callers
to use those, simplfying error handling quite a bit.
Change-Id: I985fe7fa988ebbae25601d15cf57fd48eda0c677
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2613833
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Safety build does not support vidmem. This patch compiles out vidmem
related changes - vidmem, dma alloc, cbc/acr/pmu alloc based on
vidmem and corresponding tests like pramin, page allocator &
gmmu_map_unmap_vidmem..
As vidmem is applicable only in case of DGPUs the code is compiled
out using CONFIG_NVGPU_DGPU.
JIRA NVGPU-3524
Change-Id: Ic623801112484ffc071195e828ab9f290f945d4d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2132773
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Allocate space at runtime for PMU RTOS fw struct, this helps
to reduce the size of nvgpu_pmu struct when LS_PMU support
is not required.
Allocation happens at pmu early init stage & will deinit at
remove_support stage.
JIRA NVGPU-1972
Change-Id: I1452b085f8d3a76e12186f788c2d999a8b4b202d
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2111072
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fix following misra violations in pmu ipc units:
1. Rule 10.4: msg->msg.init.msg_type was being set value from enum.
converted corresponding value PMU_INIT_MSG_TYPE_PMU_INIT to u8.
Other conversions from signed to unsigned. Conversion of the
enum PMU_RC_MSG_TYPE_UNHANDLED_CMD to unsigned value.
2. Rule 10.6: casted msg->hdr.size to U32 wherever required.
3. Rule 10.7: same as above.
4. Rule 13.5: nvgpu_timeout_expired() has side-effects of updating
the timer counts. Using it as first operand of && in if clause.
5. Rule 16.4: added non-empty default clause to switch.
6. Rule 17.7: return value of nvgpu_pmu_vidmem_surface_alloc,
nvgpu_falcon_copy_to_dmem, nvgpu_pmu_lsfm_int_wpr_region,
nvgpu_timeout_init, pmu_init_perfmon, pmu_handle_event,
pmu_response_handle and memset is handled.
7. Rule 2.2: removed unnecessary initialization of local variable.
JIRA NVGPU-3273
Change-Id: Ie5a53bcdf0d138cb02867a09dc42195449e146a0
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2112619
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Allocate space at runtime for PMU sequences, this helps to reduce the size
of nvgpu_pmu struct when LS_PMU support is not required.
Allocation happens at pmu early init stage & will deinit at remove_support
stage.
And also removed some unused seq functions as part of CL
JIRA NVGPU-1972
Change-Id: Ib1ba983b476ddf937b08ef96e130ece2645b314c
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110104
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 2.2 defines dead code as "operations which are executed but
removal of these operations has no effect on program behavior".
Variable initializations violate this rule if initialized value is not
used and replaced.
This patch fixes some of these reported violations.
Jira NVGPU-858
Change-Id: I694517ace8884c78c63f6346e455078d19b70b4d
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110459
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Created PMU fw unit to hold PMU RTOS f/w specific ops, images,
flags & command arguments needed for PMU RTOS ucode support.
Moved PMU fw ops from gk20a.gpu_ops to pmu.fw.ops as these ops
are needed to support different version of PMU fw version for
different chips
JIRA NVGPU-1955
Change-Id: I51385d8c20524431f07cba3378676464663deb20
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2090769
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Created PMU super surface unit & moved structs/functions related to
super surface under a unit, separated super surface structs into
private/public based on its usage/access, made changes to supper
surface dependent files to reflect supper surface changes
respective to unit.
JIRA NVGPU-3045
Change-Id: I6ac426052eb60f00b432d9533460aa0afd939fe3
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2088405
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch fixes below two issues.
1.Currently clk arb exit is called after GPU registers are released.
This causes crash when clk arb WQ accesses GPU HW register for status.
The ideal way is to exit the clk_arb which removes the WQ from running
before calling lockout register.
2.Check if dGPU is dying during processing of PMU Commands.
This prevents race condition when PMU is waiting for response and device
is shutdown.
Bug 200488054
Change-Id: I812b07af7db4494d5ea2ed6197742ceb23d30a4b
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2081916
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
